Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
Removing
– Unscrew bolts -2-, and remove pull loop -1-.
lk
– Use removal lever - 80-200- to release retaining clips -1-,
and pull off trim -2- far enough to gain access to electrical
connectors.
– Disconnect electrical connectors.
– Remove trim -2-.
Installing
Install in reverse order of removal, observing the following:
– Remove any retaining clips left in rear lid using removal tool
- T40280- , and insert them into trim.
Tightening torques
♦ ⇒ Rep. gr. 70 ; Assembly overview – lower rear lid trim
7.3
Removing and installing lock carrier
trim
Special tools and workshop equipment required
♦ wedge - T10383-
7. Luggage compartment trims
165
English 