Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
– Connect electrical connectors until they engage audibly.
– Make sure that no electrical wires are trapped.
Tightening torques
♦ ⇒ Rep. gr. 70 ; Assembly overview – dash panel cross
member
5.3
Removing and installing crash bar
Removing
– Remove dash panel trim on driver side ⇒ Rep. gr. 68 ;
Removing and installing dash panel trim on driver side .
– Remove lower steering column trim ⇒ Rep. gr. 68 ; Remov‐
lk
ing and installing lower steering column trim .
– Remove footwell cover on driver side ⇒ Rep. gr. 68 ; Re‐
moving and installing footwell cover on driver side .
– Unscrew bolt -2-.
– Remove crash bar -1-, and guide it out towards bottom.
Installing
Install in reverse order of removal, observing the following:
– Make sure that crash bar is flat.
Tightening torques
♦ ⇒ Rep. gr. 70 ; Assembly overview – dash panel cross
member
136
Rep. gr.70 - Trim, insulation
English 