Trim,insulation -> Removing and installing front door trim for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
2.2  
Removing and installing trim  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Use commercially available plastic wedge to unclip trim pan‐  
el -2- from door trim -1-.  
Installing  
Install in reverse order of removal.  
2.3  
Removing and installing front door trim  
Special tools and workshop equipment required  
♦ Wedge - T10383-  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove trim ⇒ Rep. gr. 70 ; Removing and installing trim .  
– Unscrew bolts -1-.  
2. Front door trims  
103  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
– Unscrew bolt -1-.  
– Release rotary clip -2- by turning it 90° in direction of  
-arrow-.  
– Use wedge - T10383- to release clips -2-.  
– Pull front door trim -1- upwards out of window slot inner seal.  
NOTICE  
Risk of damage to the Bowden cable due to deformation.  
– Do not bend or kink the Bowden cable.  
104  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unclip Bowden cable -1-.  
– Move Bowden cable -1- until ball head -2- can be removed  
upwards.  
– Disconnect electrical connectors.  
l
Installing  
Install in reverse order of removal, observing the following:  
– Turn locking mechanism from position -2- to position -1-.  
Important  
The front door trim can only be installed when the locking  
mechanism is in position -1-.  
2. Front door trims  
105  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
If a new door trim has been installed:  
– Using suitable tool, make hole for additional equipment.  
All vehicles (continued)  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview – front door trim  
2.4  
Removing and installing mirror cover  
trim  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
lk  
Removing  
– Remove front door trim ⇒ Rep. gr. 70 ; Removing and  
installing front door trim .  
– Unclip mirror cover trim -2- from door frame -1- using com‐  
mercially available plastic wedge.  
Installing  
Install in reverse order of removal.  
2.5  
Removing and installing button/switch  
trim  
2.5.1  
Removing and installing button trim,  
upper  
Removal and installation are described for left side of vehicle as  
an example.  
106  
Rep. gr.70 - Trim, insulation  

Related Topics