Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
– Remove retaining clips left in body using removal tool -
T40280- , and insert them into D-pillar trim.
– Bring sealing lip of rear lid seal into installation position.
6.15
Removing and installing side trim
6.15.1
Removing and installing side trim
Special tools and workshop equipment required
♦ wedge - T10383-
Removal and installation are described for left side of vehicle as
an example.
Removing
– Remove C-pillar trim ⇒ Rep. gr. 70 ; Removing and instal‐
ling C-pillar trim .
– Remove D-pillar trim ⇒ Rep. gr. 70 ; Removing and instal‐
ling D pillar trim .
– Remove lock carrier trim ⇒ Rep. gr. 70 ; Removing and
installing lock carrier trim .
– Remove individual seats ⇒ Rep. gr. 72 ; Removing and
installing individual seats .
– Unclip belt exit point trim.
lk
– Unscrew bolt -2-, and remove belt end fitting -1-.
158
Rep. gr.70 - Trim, insulation
English 
