2024-2026 Lexus LBX SUV Driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving for Your Lexus LBX SUV First Generation (2024-2026)

175Driving44-1. Before drivingLexus Safety System +............ 233Driving the vehicle..................... 177Driver monitor .............................241Cargo and luggage...................183PCS (Pre-Collision System) .242Trailer towing (vehicles withoutLTA (Lane Tracing Assist) .... 253towing package)...................... 184LCA (Lane Change Assist).. 258Trailer towing (vehicles with tow-LDA (Lane Departure Alert).261ing package) ............................. 184PDA (Proactive driving assist)4-2. Driving procedures....................................................... 266Power (ignition) switch............. 191FCTA (Front Crossing TrafficEV drive mode ............................ 195Alert)............................................2724Transmission ................................ 197RSA (Road Sign Assist) ..........274Turn signal lever ........................204Dynamic radar cruise controlDriving....................................................... 278Parking brake .............................205Cruise control ..............................291Brake Hold...................................208Emergency Driving Stop System4-3. Operating the lights and wipers....................................................... 296Headlight switch.......................... 211Speed limiter............................... 298AHS (Adaptive High-beam Sys-BSM (Blind Spot Monitor).... 303tem)............................................... 214Rear Vehicle Approaching Indi-AHB (Automatic High Beam)cation ..........................................308......................................................... 218Automatic Rear Flashing HazardFog light switch ..........................220Lights............................................ 310Windshield wipers and washerSecondary Collision Brake (Rear........................................................ 222Impacts while Stopped) ........312Rear window wiper and washerSafe Exit Assist............................ 315...................
175
Driving
4
4-1. Before driving
Lexus Safety System +............ 233
Driving the vehicle..................... 177
Driver monitor .............................241
Cargo and luggage...................183
PCS (Pre-Collision System) .242
Trailer towing (vehicles without
LTA (Lane Tracing Assist) .... 253
towing package)...................... 184
LCA (Lane Change Assist).. 258
Trailer towing (vehicles with tow-
LDA (Lane Departure Alert).261
ing package) ............................. 184
PDA (Proactive driving assist)
4-2. Driving procedures
....................................................... 266
Power (ignition) switch............. 191
FCTA (Front Crossing Traffic
EV drive mode ............................ 195
Alert)............................................272
4
Transmission ................................ 197
RSA (Road Sign Assist) ..........274
Turn signal lever ........................204
Dynamic radar cruise control
Driving
....................................................... 278
Parking brake .............................205
Cruise control ..............................291
Brake Hold...................................208
Emergency Driving Stop System
4-3. Operating the lights and wipers
....................................................... 296
Headlight switch.......................... 211
Speed limiter............................... 298
AHS (Adaptive High-beam Sys-
BSM (Blind Spot Monitor).... 303
tem)............................................... 214
Rear Vehicle Approaching Indi-
AHB (Automatic High Beam)
cation ..........................................308
......................................................... 218
Automatic Rear Flashing Hazard
Fog light switch ..........................220
Lights............................................ 310
Windshield wipers and washer
Secondary Collision Brake (Rear
........................................................ 222
Impacts while Stopped) ........312
Rear window wiper and washer
Safe Exit Assist............................ 315
........................................................ 226
Lexus parking assist-sensor .. 319
4-4. Refueling
RCTA (Rear Crossing Traffic
Opening the fuel tank cap.....228
Alert) function ......................... 328
4-5. Using the driving support sys-
RCD (Rear Camera Detection)
tems
....................................................... 333
Lexus Safety System + software
update.........................................230
176PKSB (Parking Support Brake)........................................................ 336Parking Support Brake function(static objects front and rear ofthe vehicle/static objectsaround the vehicle)................340Parking Support Brake function(moving vehicles rear of thevehicle) ....................................... 344Parking Support Brake function(pedestrians rear of the vehicle)........................................................ 346Lexus Teammate Advanced Park........................................................348GPF (Gasoline Particulate Filter)system .........................................383Driving assist systems..............3844-6. Driving tipsHybrid Electric Vehicle drivingtips........................................................390Winter driving tips .................... 392Utility vehicle precautions.....395
176
PKSB (Parking Support Brake)
........................................................ 336
Parking Support Brake function
(static objects front and rear of
the vehicle/static objects
around the vehicle)................340
Parking Support Brake function
(moving vehicles rear of the
vehicle) ....................................... 344
Parking Support Brake function
(pedestrians rear of the vehicle)
........................................................ 346
Lexus Teammate Advanced Park
........................................................348
GPF (Gasoline Particulate Filter)
system .........................................383
Driving assist systems..............384
4-6. Driving tips
Hybrid Electric Vehicle driving
tips
........................................................390
Winter driving tips .................... 392
Utility vehicle precautions.....395
4-1. Before driving1773 Shift the shift position to P.4-1.Before drivingDriving the vehicle(P.198)Check that the shift position indicatorThe following procedures should beshows P and the parking brake indicator isobserved to ensure safe driving:illuminated.4 Press the power switch to stop thehybrid procedure5 Slowly release the brake pedal.■ Starting the hybrid system6 Lock the door, making sure thatP.191you have the electronic key on your■ Drivingperson.1 With the brake pedal depressed,If parking on a hill, block the wheels asshift the shift position to .■ Starting off on a steep uphillCheck that the shift position indicatorshows D.1 Firmly depress the brake pedal and42 If the parking brake is set, releaseshift the shift position to parking brake. (P.205)The hill-start assist control will be the parking brake is in automatic mode,2 Set the parking brake. (P.205)the parking brake will be released auto-matically. (P.206)3 Release the brake pedal and gently3 Gradually release the brake pedaldepress the accelerator pedal toand gently depress the acceleratoraccelerate the to accelerate the vehicle.4 Release the parking brake.■ Stopping(P.205)1 Depress the brake pedal.■ For fuel-efficient driving2 If necessary, set the parking in mind that Hybrid Electric VehiclesIf the vehicle is to be stopped for anare similar to conventional vehicles, and it isextended period of time, shift the shift posi-necessary to refrain from activities such astion to P. (P.198)sudden acceleration. (P.390)■ Parking the vehicle■ Driving in the rain1 Depress the brake pedal to stop● Drive carefully when it is raining, becausevisibility will be reduced, the windowsthe vehicle become fogged-up, and the road2 If the parking brake is released, setwill be parking brake. (P.205)● Drive carefully when it starts to rain,because the road surface will be espe-If the parking brake is in automatic mod
4-1. Before driving
177
3 Shift the shift position to P.
4-1.Before driving
Driving the vehicle
(P.198)
Check that the shift position indicator
The following procedures should be
shows P and the parking brake indicator is
observed to ensure safe driving:
illuminated.
4 Press the power switch to stop the
hybrid system.
Driving procedure
5 Slowly release the brake pedal.
■ Starting the hybrid system
6 Lock the door, making sure that
P.191
you have the electronic key on your
■ Driving
person.
1 With the brake pedal depressed,
If parking on a hill, block the wheels as
shift the shift position to D.
needed.
■ Starting off on a steep uphill
Check that the shift position indicator
shows D.
1 Firmly depress the brake pedal and
4
2 If the parking brake is set, release
shift the shift position to D.
the parking brake. (P.205)
The hill-start assist control will be activated.
Driving
If the parking brake is in automatic mode,
2 Set the parking brake. (P.205)
the parking brake will be released auto-
matically. (P.206)
3 Release the brake pedal and gently
3 Gradually release the brake pedal
depress the accelerator pedal to
and gently depress the accelerator
accelerate the vehicle.
pedal to accelerate the vehicle.
4 Release the parking brake.
■ Stopping
(P.205)
1 Depress the brake pedal.
■ For fuel-efficient driving
2 If necessary, set the parking brake.
Keep in mind that Hybrid Electric Vehicles
If the vehicle is to be stopped for an
are similar to conventional vehicles, and it is
extended period of time, shift the shift posi-
necessary to refrain from activities such as
tion to P. (P.198)
sudden acceleration. (P.390)
■ Parking the vehicle
■ Driving in the rain
1 Depress the brake pedal to stop
● Drive carefully when it is raining, because
visibility will be reduced, the windows
the vehicle completely.
may become fogged-up, and the road
2 If the parking brake is released, set
will be slippery.
the parking brake. (P.205)
● Drive carefully when it starts to rain,
because the road surface will be espe-
If the parking brake is in automatic mode,
cially slippery.
turning off the power switch will automati-
● Refrain from high speeds when driving on
cally set the parking brake. (P.206)
an expressway in the rain, because there
may be a layer of water between the tires
1784-1. Before drivingand the road surface, preventing the• Accidentally depressing the accelera-steering and brakes from operatingtor pedal instead of the brake result in sudden acceleration thatmay lead to an accident.■ Restraining the hybrid system output(Brake Override System)• When backing up, you may twist your● When the accelerator and brake pedalsbody around, leading to a difficulty inare depressed at the same time, theoperating the pedals. Make sure tohybrid system output may be the pedals properly.● A warning message is displayed on the• Make sure to keep a correct drivingmulti-information display while the sys-posture even when moving the vehicletem is slightly. This allows you to depress■ Breaking in your new Lexusthe brake and accelerator extend the life of the vehicle, observingthe following precautions is recommended:• Depress the brake pedal using your● For the first 300 km (200 miles):right foot. Depressing the brake pedalAvoid sudden your left foot may delayresponse in an emergency, resulting in● For the first 1000 km (600 miles):an accident.• Do not drive at extremely high speeds.• Avoid sudden acceleration.● The driver should pay extra attention• Do not drive continuously in low pedestrians when the vehicle is• Do not drive at a constant speed forpowered only by the electric motorextended periods.(traction motor). As there is no engine■ Operating your vehicle in a foreignnoise, the pedestrians may misjudgecountrythe vehicle’s movement. Even if theAcoustic Vehicle Alerting System isComply with the relevant vehicle registra-operating, drive with care as pedestri-tion laws and confirm the availability of theans in the vicinity may still not noticecorrect fuel. (P.548)the vehicle if the surrounding area ● Do not drive the vehicle over or stopObserve the following vehicle near flammable materialsFailure to do so may result in dea
178
4-1. Before driving
and the road surface, preventing the
• Accidentally depressing the accelera-
steering and brakes from operating
tor pedal instead of the brake pedal
properly.
will result in sudden acceleration that
may lead to an accident.
■ Restraining the hybrid system output
(Brake Override System)
• When backing up, you may twist your
● When the accelerator and brake pedals
body around, leading to a difficulty in
are depressed at the same time, the
operating the pedals. Make sure to
hybrid system output may be restrained.
operate the pedals properly.
● A warning message is displayed on the
• Make sure to keep a correct driving
multi-information display while the sys-
posture even when moving the vehicle
tem is operating.
only slightly. This allows you to depress
■ Breaking in your new Lexus
the brake and accelerator pedals
properly.
To extend the life of the vehicle, observing
the following precautions is recommended:
• Depress the brake pedal using your
● For the first 300 km (200 miles):
right foot. Depressing the brake pedal
Avoid sudden stops.
using your left foot may delay
response in an emergency, resulting in
● For the first 1000 km (600 miles):
an accident.
• Do not drive at extremely high speeds.
• Avoid sudden acceleration.
● The driver should pay extra attention
• Do not drive continuously in low gears.
to pedestrians when the vehicle is
• Do not drive at a constant speed for
powered only by the electric motor
extended periods.
(traction motor). As there is no engine
■ Operating your vehicle in a foreign
noise, the pedestrians may misjudge
country
the vehicle’s movement. Even if the
Acoustic Vehicle Alerting System is
Comply with the relevant vehicle registra-
operating, drive with care as pedestri-
tion laws and confirm the availability of the
ans in the vicinity may still not notice
correct fuel. (P.548)
the vehicle if the surrounding area is
noisy.
WARNING
● Do not drive the vehicle over or stop
Observe the following precautions.
the vehicle near flammable materials
Failure to do so may result in death or
such as leaves, paper or rags.
serious injury.
The exhaust system and exhaust gases
can be extremely hot. These hot parts
■ When starting the vehicle
may cause a fire if there is any flamma-
Always keep your foot on the brake
ble material nearby.
pedal while stopped with the “READY”
indicator is illuminated. This prevents the
vehicle from creeping.
■ When driving the vehicle
● Do not drive if you are unfamiliar with
the location of the brake and accelera-
tor pedals to avoid depressing the
wrong pedal.
4-1. Before driving179■ When driving on slippery road sur-WARNINGfaces● During normal driving, do not turn off● Sudden braking, acceleration andthe hybrid system. Turning the hybridsteering may cause tire slippage andsystem off while driving will not causereduce your ability to control the vehi-loss of steering or braking , power assist for the steeringwheel may be lost making it difficult to● Sudden acceleration, engine brakingsteer smoothly before stopping thedue to shifting, or changes in enginevehicle depending on the remainingspeed could cause the vehicle to skid,charge in the 12-volt battery or usageresulting in an . In this situation, you shouldpull over and stop the vehicle as soon● After driving through a puddle, lightlyas it is safe to do the brake pedal to make sureIn the event of an emergency, such asthat the brakes are functioning prop-if it becomes impossible to stop theerly. Wet brake pads may prevent thevehicle in the normal way: P.482brakes from functioning properly. Ifthe brakes on only one side are wet● Use engine braking (downshift) toand not functioning properly, steeringmaintain a safe speed when drivingcontrol may be a steep hill.4Using the brakes continuously may■ When shifting the shift positioncause the brakes to overheat and lose● Do not let the vehicle roll backwardeffectiveness. (P.197)Drivingwhile a forward driving position isselected, or roll forward while the shift● Do not adjust the position of the steer-position is in wheel, the seat, inside rear viewDoing so may result in an accident ormirror or outside rear view mirrorsdamage to the so may result in a loss of vehicle● Do not shift the shift position to P vehicle is so can damage the transmission● Always check that all passengers’and may result in a loss of vehicle con-arms, head or other parts of their not outside the vehicle.● Do not shift
4-1. Before driving
179
■ When driving on slippery road sur-
WARNING
faces
● During normal driving, do not turn off
● Sudden braking, acceleration and
the hybrid system. Turning the hybrid
steering may cause tire slippage and
system off while driving will not cause
reduce your ability to control the vehi-
loss of steering or braking control.
cle.
However, power assist for the steering
wheel may be lost making it difficult to
● Sudden acceleration, engine braking
steer smoothly before stopping the
due to shifting, or changes in engine
vehicle depending on the remaining
speed could cause the vehicle to skid,
charge in the 12-volt battery or usage
resulting in an accident.
conditions. In this situation, you should
pull over and stop the vehicle as soon
● After driving through a puddle, lightly
as it is safe to do so.
depress the brake pedal to make sure
In the event of an emergency, such as
that the brakes are functioning prop-
if it becomes impossible to stop the
erly. Wet brake pads may prevent the
vehicle in the normal way: P.482
brakes from functioning properly. If
the brakes on only one side are wet
● Use engine braking (downshift) to
and not functioning properly, steering
maintain a safe speed when driving
control may be affected.
down a steep hill.
4
Using the brakes continuously may
■ When shifting the shift position
cause the brakes to overheat and lose
● Do not let the vehicle roll backward
effectiveness. (P.197)
Driving
while a forward driving position is
selected, or roll forward while the shift
● Do not adjust the position of the steer-
position is in R.
ing wheel, the seat, inside rear view
Doing so may result in an accident or
mirror or outside rear view mirrors
damage to the vehicle.
while driving.
Doing so may result in a loss of vehicle
● Do not shift the shift position to P while
control.
the vehicle is moving.
Doing so can damage the transmission
● Always check that all passengers’
and may result in a loss of vehicle con-
arms, head or other parts of their body
trol.
are not outside the vehicle.
● Do not shift the shift position to R while
● AWD models:
the vehicle is moving forward.
Do not drive the vehicle off-road.
Doing so can damage the transmission
and may result in a loss of vehicle con-
This is not an AWD vehicle designed for
trol.
off-road driving. Drive with due care if it
becomes unavoidable to drive off-road.
● Do not shift the shift position to a driv-
ing position while the vehicle is moving
● Do not drive across a river or through
backward.
other bodies of water. This may cause
Doing so can damage the transmission
electric/electronic components to
and may result in a loss of vehicle con-
short circuit, damage the hybrid sys-
trol.
tem or cause other serious damage to
the vehicle.
1804-1. Before driving● In order to prevent accidents due toWARNINGthe vehicle rolling away, always keep● Changing the shift position to N whiledepressing the brake pedal whilethe vehicle is moving will disengagestopped with the “READY” indicator isthe hybrid system. Regenerative brak-illuminated, and apply the parkinging is not available with the hybrid sys-brake as disengaged.● If the vehicle is stopped on an incline,● Be careful not to change the shift posi-in order to prevent accidents causedtion with the accelerator pedalby the vehicle rolling forward or , always depress the brake pedalChanging the shift position to anyand securely apply the parking brakepositions other than P or N may lead toas rapid acceleration of thevehicle that may cause an accident● Avoid revving or racing the result in death or serious the engine at high speedAfter changing the shift position, makewhile the vehicle is stopped may causesure to confirm the current shift posi-the exhaust system to overheat, whichtion displayed on the shift position indi-could result in a fire if combustiblecator inside the is nearby.■ If you hear a squealing or scraping■ When the vehicle is parkednoise (brake pad wear indicators)● Do not leave glasses, cigarette light-Have the brake pads checked anders, spray cans, or soft drink cans in thereplaced by any authorized Lexusvehicle when it is in the or Lexus authorized repairer, orDoing so may result in the following:any reliable repairer as soon as possible.• Gas may leak from a cigarette lighterRotor damage may result if the pads areor spray can, and may lead to a replaced when with high coefficient of friction• The temperature inside the vehiclebrake pads: Moderate levels of brakemay cause the plastic lenses and plas-pad and disc wear allow enhanced fronttic material of glasses to deform orbraking power. As a result, the discs ma
180
4-1. Before driving
● In order to prevent accidents due to
WARNING
the vehicle rolling away, always keep
● Changing the shift position to N while
depressing the brake pedal while
the vehicle is moving will disengage
stopped with the “READY” indicator is
the hybrid system. Regenerative brak-
illuminated, and apply the parking
ing is not available with the hybrid sys-
brake as necessary.
tem disengaged.
● If the vehicle is stopped on an incline,
● Be careful not to change the shift posi-
in order to prevent accidents caused
tion with the accelerator pedal
by the vehicle rolling forward or back-
depressed.
ward, always depress the brake pedal
Changing the shift position to any
and securely apply the parking brake
positions other than P or N may lead to
as needed.
unexpected rapid acceleration of the
vehicle that may cause an accident
● Avoid revving or racing the engine.
and result in death or serious injury.
Running the engine at high speed
After changing the shift position, make
while the vehicle is stopped may cause
sure to confirm the current shift posi-
the exhaust system to overheat, which
tion displayed on the shift position indi-
could result in a fire if combustible
cator inside the meter.
material is nearby.
■ If you hear a squealing or scraping
■ When the vehicle is parked
noise (brake pad wear indicators)
● Do not leave glasses, cigarette light-
Have the brake pads checked and
ers, spray cans, or soft drink cans in the
replaced by any authorized Lexus
vehicle when it is in the sun.
retailer or Lexus authorized repairer, or
Doing so may result in the following:
any reliable repairer as soon as possible.
• Gas may leak from a cigarette lighter
Rotor damage may result if the pads are
or spray can, and may lead to a fire.
not replaced when needed.
Vehicles with high coefficient of friction
• The temperature inside the vehicle
brake pads: Moderate levels of brake
may cause the plastic lenses and plas-
pad and disc wear allow enhanced front
tic material of glasses to deform or
braking power. As a result, the discs may
crack.
wear more quickly than conventional
brake discs. Therefore, when replacing
• Soft drink cans may fracture, causing
the brake pads, Lexus recommends that
the contents to spray over the interior
you also have the thickness of the discs
of the vehicle, and may also cause a
measured.
short circuit in the vehicle’s electrical
It is dangerous to drive the vehicle when
components.
the wear limits of the brake pads and/or
those of the brake discs are exceeded.
● Do not leave cigarette lighters in the
vehicle. If a cigarette lighter is in a
■ When the vehicle is stopped
place such as the glove box or on the
● Do not depress the accelerator pedal
floor, it may be lit accidentally when
unnecessarily.
luggage is loaded or the seat is
If the shift position is in any position
adjusted, causing a fire.
other than P or N, the vehicle may
accelerate suddenly and unexpect-
edly, causing an accident.
4-1. Before driving181● If the electronically controlled brakeWARNINGsystem does not operate, do not follow● Do not attach adhesive discs to theother vehicles closely and avoid hills orwindshield or windows. Do not placesharp turns that require such as air fresheners onIn this case, braking is still possible, butthe instrument panel or brake pedal should be depressedAdhesive discs or containers may actmore firmly than usual. Also, the brak-as lenses, causing a fire in the distance will increase. Have yourbrakes fixed immediately.● Do not leave a door or window open ifthe curved glass is coated with a met-● The brake system consists of 2 orallized film such as a silver-coloredmore individual hydraulic systems; ifone. Reflected sunlight may cause theone of the systems fails, the other(s)glass to act as a lens, causing a still operate. In this case, the brakepedal should be depressed more● Always apply the parking brake, shiftfirmly than usual and the braking dis-the shift position to P, stop the hybridtance will increase. Have your brakessystem and lock the not leave the vehicle unattendedwhile the “READY” indicator is illumi-■ If the vehicle becomes stuck ()4If the vehicle is parked with the shift● Do not spin the wheels excessivelyposition in P but the parking brake iswhen any of the tires is up in the air, ornot set, the vehicle may start to move,Drivingthe vehicle is stuck in sand, mud, leading to an may damage the driveline com-ponents or propel the vehicle forward● Do not touch the exhaust pipes whileor backward, causing an “READY” indicator is illuminatedor immediately after turning the hybridsystem so may cause ■ When driving the vehicle■ When taking a nap in the vehicle● Do not depress the accelerator andAlways turn the hybrid system off. Oth-brake pedals at the same time duringerwise, if you accide
4-1. Before driving
181
● If the electronically controlled brake
WARNING
system does not operate, do not follow
● Do not attach adhesive discs to the
other vehicles closely and avoid hills or
windshield or windows. Do not place
sharp turns that require braking.
containers such as air fresheners on
In this case, braking is still possible, but
the instrument panel or dashboard.
the brake pedal should be depressed
Adhesive discs or containers may act
more firmly than usual. Also, the brak-
as lenses, causing a fire in the vehicle.
ing distance will increase. Have your
brakes fixed immediately.
● Do not leave a door or window open if
the curved glass is coated with a met-
● The brake system consists of 2 or
allized film such as a silver-colored
more individual hydraulic systems; if
one. Reflected sunlight may cause the
one of the systems fails, the other(s)
glass to act as a lens, causing a fire.
will still operate. In this case, the brake
pedal should be depressed more
● Always apply the parking brake, shift
firmly than usual and the braking dis-
the shift position to P, stop the hybrid
tance will increase. Have your brakes
system and lock the vehicle.
fixed immediately.
Do not leave the vehicle unattended
while the “READY” indicator is illumi-
■ If the vehicle becomes stuck (AWD
nated.
vehicles)
4
If the vehicle is parked with the shift
● Do not spin the wheels excessively
position in P but the parking brake is
when any of the tires is up in the air, or
not set, the vehicle may start to move,
Driving
the vehicle is stuck in sand, mud, etc.
possibly leading to an accident.
This may damage the driveline com-
ponents or propel the vehicle forward
● Do not touch the exhaust pipes while
or backward, causing an accident.
the “READY” indicator is illuminated
or immediately after turning the hybrid
system off.
Doing so may cause burns.
NOTICE
■ When driving the vehicle
■ When taking a nap in the vehicle
● Do not depress the accelerator and
Always turn the hybrid system off. Oth-
brake pedals at the same time during
erwise, if you accidentally shift the shift
driving, as this may restrain the hybrid
position or depress the accelerator
system output.
pedal, this could cause an accident or fire
due to hybrid system overheating. Addi-
● Do not use the accelerator pedal or
tionally, if the vehicle is parked in a poorly
depress the accelerator and brake
ventilated area, exhaust gases may col-
pedals at the same time to hold the
lect and enter the vehicle, leading to
vehicle on a hill.
death or a serious health hazard.
■ Avoiding damage to vehicle parts
■ When braking
● Do not turn the steering wheel fully in
● When the brakes are wet, drive more
either direction and hold it there for an
cautiously.
extended period of time.
Braking distance increases when the
Doing so may damage the power
brakes are wet, and this may cause
steering motor.
one side of the vehicle to brake differ-
ently than the other side. Also, the
parking brake may not securely hold
the vehicle.
1824-1. Before drivingIf the shift control system is damaged byNOTICEflooding, it may not be possible to shift● When driving over bumps in the road,the shift position to P, or from P to otherdrive as slowly as possible to the wheels, underside of theIn this case, contact any authorizedvehicle, retailer or Lexus authorizedrepairer, or any reliable repairer.■ If you get a flat tire while driving■ When parking the vehicleA flat or damaged tire may cause the fol-lowing situations. Hold the steeringAlways set the parking brake, and shiftwheel firmly and gradually depress thethe shift position to P. Failure to do sobrake pedal to slow down the cause the vehicle to move or thevehicle may accelerate suddenly if the● It may be difficult to control your vehi-accelerator pedal is .● The vehicle will make abnormalsounds or start restraint control● The vehicle will lean abnormally.(Drive-Start Control [DSC])Information on what to do in case of a flattire (P.507, 518)When the following unusual operationis performed with the accelerator■ When encountering flooded roadspedal depressed, the hybrid systemDo not drive on a road that has floodedafter heavy rain, etc. Doing so may causeoutput may be following serious damage to the vehi- When the shift lever is shifted to R * .cle: When the shift lever is shifted from P● Engine stallingor R to forward drive shift position● Short in electrical componentssuch as D * .● Engine damage caused by waterimmersionWhen the system operates, a messageappears on the multi-information the event that you drive on a floodedRead the message and follow the instruc-road and the vehicle is flooded, be have any authorized Lexus retailer orLexus authorized repairer, or any reli-* : Depending on the situation, the shiftable repairer check the following:position may not be changed.● Brake function■ Drive-Start Control (DSC)● Changes
182
4-1. Before driving
If the shift control system is damaged by
NOTICE
flooding, it may not be possible to shift
● When driving over bumps in the road,
the shift position to P, or from P to other
drive as slowly as possible to avoid
positions.
damaging the wheels, underside of the
In this case, contact any authorized
vehicle, etc.
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
■ If you get a flat tire while driving
■ When parking the vehicle
A flat or damaged tire may cause the fol-
lowing situations. Hold the steering
Always set the parking brake, and shift
wheel firmly and gradually depress the
the shift position to P. Failure to do so
brake pedal to slow down the vehicle.
may cause the vehicle to move or the
vehicle may accelerate suddenly if the
● It may be difficult to control your vehi-
accelerator pedal is accidentally
cle.
depressed.
● The vehicle will make abnormal
sounds or vibrations.
Sudden start restraint control
● The vehicle will lean abnormally.
(Drive-Start Control [DSC])
Information on what to do in case of a flat
tire (P.507, 518)
When the following unusual operation
is performed with the accelerator
■ When encountering flooded roads
pedal depressed, the hybrid system
Do not drive on a road that has flooded
after heavy rain, etc. Doing so may cause
output may be restrained.
the following serious damage to the vehi-
 When the shift lever is shifted to R * .
cle:
 When the shift lever is shifted from P
● Engine stalling
or R to forward drive shift position
● Short in electrical components
such as D * .
● Engine damage caused by water
immersion
When the system operates, a message
appears on the multi-information display.
In the event that you drive on a flooded
Read the message and follow the instruc-
road and the vehicle is flooded, be sure
tion.
to have any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
* : Depending on the situation, the shift
able repairer check the following:
position may not be changed.
● Brake function
■ Drive-Start Control (DSC)
● Changes in quantity and quality of oil
and fluid used for the engine, transmis-
When the TRC is turned off (P.385),
sion, transaxle, etc.
sudden start restraint control also does not
operate. If your vehicle have trouble escap-
● Lubricant condition for the bearings
ing from the mud or fresh snow due to sud-
and suspension joints (where possi-
den start restraint control operation,
ble), and the function of all joints, bear-
deactivate TRC (P.385) so that the vehi-
ings, etc.
cle may become able to escape from the
mud or fresh snow.
4-1. Before driving183Cargo and luggage● Do not place cargo or luggage in or onthe following locations.• At the feet of the driverTake notice of the following infor-• On the front passenger or rear seatsmation about storage precautions,(when stacking items)cargo capacity and load:• On the luggage cover• On the instrument panelWARNING• On the dashboard■ Things that must not be carried in the• In front of the Center Displayluggage compartment● Secure all items in the occupant com-The following things may cause a fire in the luggage compartment:● Receptacles containing gasoline■ Load and distribution● Do not overload your vehicle.● Aerosol cans● Do not apply loads unevenly.■ Storage precautionsImproper loading may cause deterio-Observe the following precautions.4ration of steering or braking controlFailure to do so may prevent the pedalswhich may cause death or seriousfrom being depressed properly, the driver’s vision, or may result inDrivingitems hitting the driver or passengers,possibly causing an accident.● Stow cargo and luggage in the lug-gage compartment whenever possi-ble.● Do not stack cargo and luggage in theluggage compartment higher than theseatbacks.● When you fold down the rear seats,long items should not be placeddirectly behind the front seats.● Never allow anyone to ride in the lug-gage compartment. It is not designedfor passengers. They should ride intheir seats with their seat belts prop-erly fastened.
4-1. Before driving
183
Cargo and luggage
● Do not place cargo or luggage in or on
the following locations.
• At the feet of the driver
Take notice of the following infor-
• On the front passenger or rear seats
mation about storage precautions,
(when stacking items)
cargo capacity and load:
• On the luggage cover
• On the instrument panel
WARNING
• On the dashboard
■ Things that must not be carried in the
• In front of the Center Display
luggage compartment
● Secure all items in the occupant com-
The following things may cause a fire if
partment.
loaded in the luggage compartment:
● Receptacles containing gasoline
■ Load and distribution
● Do not overload your vehicle.
● Aerosol cans
● Do not apply loads unevenly.
■ Storage precautions
Improper loading may cause deterio-
Observe the following precautions.
4
ration of steering or braking control
Failure to do so may prevent the pedals
which may cause death or serious
from being depressed properly, may
injury.
block the driver’s vision, or may result in
Driving
items hitting the driver or passengers,
possibly causing an accident.
● Stow cargo and luggage in the lug-
gage compartment whenever possi-
ble.
● Do not stack cargo and luggage in the
luggage compartment higher than the
seatbacks.
● When you fold down the rear seats,
long items should not be placed
directly behind the front seats.
● Never allow anyone to ride in the lug-
gage compartment. It is not designed
for passengers. They should ride in
their seats with their seat belts prop-
erly fastened.
1844-1. Before drivingTrailer towing (vehiclesTrailer towing (vehicles withwithout towing package)towing package)Lexus does not recommend towingYour vehicle is designed primarilya trailer with your vehicle. Lexusas a passenger carrying does not recommend theTowing a trailer will have aninstallation of a tow hitch or the useadverse effect on handling, perfor-of a tow hitch carrier for a wheel-mance, braking, durability, and fuelchair, scooter, bicycle, etc. Yourconsumption. Your safety and satis-vehicle is not designed for trailerfaction depend on the proper use oftowing or for the use of tow hitchcorrect equipment and cautiousmounted habits. For your safety andthe safety of others, do not overloadthe vehicle or tow a trailer safely, use extremecare and drive the vehicle in accor-dance with the trailer’s characteris-tics and operating warranties do not apply todamage or malfunction caused bytowing a trailer for commercial your local authorized Lexusretailer or Lexus authorizedrepairer, or any reliable repairerfor further details before towing, asthere are additional legal require-ments in some limitsCheck the allowable towing capacity,GVM (Gross Vehicle Mass), MPAC(Maximum Permissible Axle Capac-ity), and permissible drawbar loadbefore towing. (P.546)
184
4-1. Before driving
Trailer towing (vehicles
Trailer towing (vehicles with
without towing package)
towing package)
Lexus does not recommend towing
Your vehicle is designed primarily
a trailer with your vehicle. Lexus
as a passenger carrying vehicle.
also does not recommend the
Towing a trailer will have an
installation of a tow hitch or the use
adverse effect on handling, perfor-
of a tow hitch carrier for a wheel-
mance, braking, durability, and fuel
chair, scooter, bicycle, etc. Your
consumption. Your safety and satis-
vehicle is not designed for trailer
faction depend on the proper use of
towing or for the use of tow hitch
correct equipment and cautious
mounted carriers.
driving habits. For your safety and
the safety of others, do not overload
the vehicle or trailer.
To tow a trailer safely, use extreme
care and drive the vehicle in accor-
dance with the trailer’s characteris-
tics and operating conditions.
Lexus warranties do not apply to
damage or malfunction caused by
towing a trailer for commercial pur-
poses.
Ask your local authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer
for further details before towing, as
there are additional legal require-
ments in some countries.
Weight limits
Check the allowable towing capacity,
GVM (Gross Vehicle Mass), MPAC
(Maximum Permissible Axle Capac-
ity), and permissible drawbar load
before towing. (P.546)
4-1. Before driving185Towing hitch/bicycle holderImportant points regardingbrackettrailer loadsLexus recommends the use of the gen-■ Total trailer weight and permissi-uine Lexus towing devices or bicycleble drawbar loadholder brackets if available. Otherproducts of a suitable nature and com-parable quality may also be vehicles where the towing deviceball or the bicycle holder attachmentball, when installed, partially obstructsthe visibility of any of the rear lampsand/or license plate, the following shallbe considered:A Total trailer weight Do not use towing devices that have4Weight of the trailer itself plus the trailera tow ball that cannot be easilyload should be within the maximum towingremoved or . Exceeding this weight is danger-Driving Do not use bicycle holder bracketsous. (P.546)that have an attachment ball thatB Permissible drawbar loadcannot be easily removed or reposi-Allocate the trailer load so that load is greater than 25 kgAll detachable towing devices balls or(55.1 lb.) or 4% of the towing holder attachment balls shouldDo not let the drawbar load exceed thebe removed or repositioned when notindicated weight. (P.546)in use.■ Information tag (manufacturer’slabel)Connecting trailer lights Type APlease consult any authorized Lexusretailer or Lexus authorized repairer,or any reliable repairer when installingtrailer lights, as incorrect installationmay cause damage to the vehicle’slights. Please take care to comply withyour state’s laws when installing trailerlights.A Gross vehicle mass
4-1. Before driving
185
Towing hitch/bicycle holder
Important points regarding
bracket
trailer loads
Lexus recommends the use of the gen-
■ Total trailer weight and permissi-
uine Lexus towing devices or bicycle
ble drawbar load
holder brackets if available. Other
products of a suitable nature and com-
parable quality may also be used.
For vehicles where the towing device
ball or the bicycle holder attachment
ball, when installed, partially obstructs
the visibility of any of the rear lamps
and/or license plate, the following shall
be considered:
A Total trailer weight
 Do not use towing devices that have
4
Weight of the trailer itself plus the trailer
a tow ball that cannot be easily
load should be within the maximum towing
removed or repositioned.
capacity. Exceeding this weight is danger-
Driving
 Do not use bicycle holder brackets
ous. (P.546)
that have an attachment ball that
B Permissible drawbar load
cannot be easily removed or reposi-
Allocate the trailer load so that the
tioned.
drawbar load is greater than 25 kg
All detachable towing devices balls or
(55.1 lb.) or 4% of the towing capacity.
bicycle holder attachment balls should
Do not let the drawbar load exceed the
be removed or repositioned when not
indicated weight. (P.546)
in use.
■ Information tag (manufacturer’s
label)
Connecting trailer lights
 Type A
Please consult any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer when installing
trailer lights, as incorrect installation
may cause damage to the vehicle’s
lights. Please take care to comply with
your state’s laws when installing trailer
lights.
A Gross vehicle mass
1864-1. Before drivingThe combined weight of the driver, pas-The values for towing capacity weresengers, luggage, towing hitch, total curbderived from testing conducted at seamass and drawbar load should not exceedlevel. Take note that hybrid system outputthe gross vehicle mass by more than 100and towing capacity will be reduced atkg (220.5 lb.). Exceeding this weight ishigh Maximum permissible rear axle■ When the gross vehicle mass or maxi-capacitymum permissible axle capacity isThe weight borne by the rear axle shouldexceedednot exceed the maximum permissible axleFailing to observe this precaution maycapacity by 15% or more. Exceeding thislead to an accident causing death or seri-ous is values for towing capacity were● Add an additional 20.0 kPa (0.2kgf/cm 2 or bar, 3 psi) to the recom-derived from testing conducted at seamended tire inflation pressure . Take note that hybrid system output(P.554)and towing capacity will be reduced athigh altitudes.● Do not exceed the established speedlimit for towing a trailer in built-up Type Bareas or 100 km/h (62 mph), which-ever is lower.A Gross vehicle massThe combined weight of the driver, pas-sengers, luggage, towing hitch, total curbmass and drawbar load should not exceedthe gross vehicle mass by more than 100kg (220.5 lb.). Exceeding this weight isdangerous.B Maximum permissible rear axlecapacityThe weight borne by the rear axle shouldnot exceed the maximum permissible axlecapacity by 15% or more. Exceeding thisweight is dangerous.
186
4-1. Before driving
The combined weight of the driver, pas-
The values for towing capacity were
sengers, luggage, towing hitch, total curb
derived from testing conducted at sea
mass and drawbar load should not exceed
level. Take note that hybrid system output
the gross vehicle mass by more than 100
and towing capacity will be reduced at
kg (220.5 lb.). Exceeding this weight is
high altitudes.
dangerous.
WARNING
B Maximum permissible rear axle
■ When the gross vehicle mass or maxi-
capacity
mum permissible axle capacity is
The weight borne by the rear axle should
exceeded
not exceed the maximum permissible axle
Failing to observe this precaution may
capacity by 15% or more. Exceeding this
lead to an accident causing death or seri-
ous injury.
weight is dangerous.
The values for towing capacity were
● Add an additional 20.0 kPa (0.2
kgf/cm 2 or bar, 3 psi) to the recom-
derived from testing conducted at sea
mended tire inflation pressure value.
level. Take note that hybrid system output
(P.554)
and towing capacity will be reduced at
high altitudes.
● Do not exceed the established speed
limit for towing a trailer in built-up
 Type B
areas or 100 km/h (62 mph), which-
ever is lower.
A Gross vehicle mass
The combined weight of the driver, pas-
sengers, luggage, towing hitch, total curb
mass and drawbar load should not exceed
the gross vehicle mass by more than 100
kg (220.5 lb.). Exceeding this weight is
dangerous.
B Maximum permissible rear axle
capacity
The weight borne by the rear axle should
not exceed the maximum permissible axle
capacity by 15% or more. Exceeding this
weight is dangerous.
4-1. Before driving187Installation positions for the towing hitch/bracket and hitch ball4Driving1 513 mm (20.2 in.)2 511 mm (20.1 in.)3 305 mm (12.0 in.)4 738 mm (29.1 in.)5 834 mm (32.8 in.) *1832 mm (32.8 in.) *26 39 mm (1.5 in.) *138 mm (1.5 in.) *27 45 mm (1.8 in.) *142 mm (1.7 in.) *2
4-1. Before driving
187
Installation positions for the towing hitch/bracket and hitch ball
4
Driving
1 513 mm (20.2 in.)
2 511 mm (20.1 in.)
3 305 mm (12.0 in.)
4 738 mm (29.1 in.)
5 834 mm (32.8 in.) *1
832 mm (32.8 in.) *2
6 39 mm (1.5 in.) *1
38 mm (1.5 in.) *2
7 45 mm (1.8 in.) *1
42 mm (1.7 in.) *2
1884-1. Before driving8 385 mm (15.2 in.) *3393 mm (15.5 in.) *4399 mm (15.7 in.) *5407 mm (16.0 in.) *6*1 : 2WD models*2: AWD models*3: 2WD models with 215/60R17 tires (for Turkey)*4 : 2WD models with 215/60R17 tires (except for Turkey), 225/60R17 tires or225/55R18 tires*5: AWD models with 215/60R17 tires*6: AWD models with 225/60R17 tires or 225/55R18 tires● RCTA (Rear Crossing Traffic Alert)■ Tire informationfunction (P.328)● Increase the tire inflation pressure to● RCD (Rear Camera Detection) function20.0 kPa (0.2 kgf/cm 2 or bar, 3 psi)(P.333)greater than the recommended value■ Break-in schedulewhen towing. (P.554)Lexus recommends that vehicles fitted with● Increase the air pressure of the trailernew power train components should not betires in accordance with the total trailerused for towing trailers for the first 800 kmweight and according to the values rec-(500 miles).ommended by the manufacturer of your■ Safety checks before towingtrailer.● Check that the maximum load limit for■ Trailer lightsthe towing hitch/bracket and hitch ball isPlease consult at any authorized Lexusnot exceeded. Bear in mind that the cou-retailer or Lexus authorized repairer, or anypling weight of the trailer will add to thereliable repairer when installing trailerload exerted on the vehicle. Also makelights, as incorrect installation may causesure that the total load exerted on thedamage to the vehicle’s lights. Please takevehicle is within the range of the weightcare to comply with your state’s laws whenlimits. (P.186)installing trailer lights.● Ensure that the trailer load is secure.■ When towing a trailer● Supplementary outside rear view mir-Disable the following systems, as the sys-rors should be added to the vehicle if thetems may not operate behind cannot be clearly seen withstandard mirrors. Adjust the extending● LTA (Lane Tracing Assist) (P.253)arms of these mirrors on both sides of the● Dynamic radar cruise control (P.278)vehicle so that they always pr
188
4-1. Before driving
8 385 mm (15.2 in.) *3
393 mm (15.5 in.) *4
399 mm (15.7 in.) *5
407 mm (16.0 in.) *6
*1 : 2WD models
*2
: AWD models
*3
: 2WD models with 215/60R17 tires (for Turkey)
*4 : 2WD models with 215/60R17 tires (except for Turkey), 225/60R17 tires or
225/55R18 tires
*5
: AWD models with 215/60R17 tires
*6
: AWD models with 225/60R17 tires or 225/55R18 tires
● RCTA (Rear Crossing Traffic Alert)
■ Tire information
function (P.328)
● Increase the tire inflation pressure to
● RCD (Rear Camera Detection) function
20.0 kPa (0.2 kgf/cm 2 or bar, 3 psi)
(P.333)
greater than the recommended value
■ Break-in schedule
when towing. (P.554)
Lexus recommends that vehicles fitted with
● Increase the air pressure of the trailer
new power train components should not be
tires in accordance with the total trailer
used for towing trailers for the first 800 km
weight and according to the values rec-
(500 miles).
ommended by the manufacturer of your
■ Safety checks before towing
trailer.
● Check that the maximum load limit for
■ Trailer lights
the towing hitch/bracket and hitch ball is
Please consult at any authorized Lexus
not exceeded. Bear in mind that the cou-
retailer or Lexus authorized repairer, or any
pling weight of the trailer will add to the
reliable repairer when installing trailer
load exerted on the vehicle. Also make
lights, as incorrect installation may cause
sure that the total load exerted on the
damage to the vehicle’s lights. Please take
vehicle is within the range of the weight
care to comply with your state’s laws when
limits. (P.186)
installing trailer lights.
● Ensure that the trailer load is secure.
■ When towing a trailer
● Supplementary outside rear view mir-
Disable the following systems, as the sys-
rors should be added to the vehicle if the
tems may not operate properly.
traffic behind cannot be clearly seen with
standard mirrors. Adjust the extending
● LTA (Lane Tracing Assist) (P.253)
arms of these mirrors on both sides of the
● Dynamic radar cruise control (P.278)
vehicle so that they always provide maxi-
● Cruise control (P.291)
mum visibility of the road behind.
● PKSB (Parking Support Brake)
■ Maintenance
(P.336)
● Maintenance must be performed more
● BSM (Blind Spot Monitor) (P.303)
frequently when using the vehicle for
towing due to the greater weight burden
● Lexus parking assist-sensor (P.319)
placed on the vehicle compared to nor-
4-1. Before driving189mal to turn it right.● Retighten all bolts securing the hitchingAlways rotate a little at a time toball and bracket after towing for approxi-prevent steering error. Have some-mately 1000 km (600 miles).one guide you when reversing tolessen the risk of an ■ Increasing vehicle-to-vehicle dis-■ When the rear bumper strengthen-tanceing material is aluminumEnsure the steel bracket part does notAt a speed of 10 km/h (6 mph), the dis-come directly in contact with that to the vehicle running ahead ofWhen steel and aluminum come intoyou should be equivalent to or greatercontact, there is a reaction similar to cor-rosion, which will weaken the sectionthan the combined length of your vehi-concerned and may result in and trailer. Avoid sudden brakingApply a rust inhibitor to parts that willcome in contact when attaching a steelthat may cause skidding. Otherwise, vehicle may spin out of control. Thisis especially true when driving on wet4Guidanceor slippery road surfaces.■ Sudden acceleration/steeringYour vehicle will handle differentlyDrivinginput/corneringwhen towing a trailer. In order to avoidaccident, death or serious injury, keepExecuting sharp turns when towingthe following in mind when towing:may result in the trailer colliding withyour vehicle. Decelerate well in■ Checking connections betweenadvance when approaching turns andtrailer and lightstake them slowly and carefully to avoidStop the vehicle and check the opera-sudden of the connection between the■ Important points regarding turningtrailer and lights after driving for a briefperiod as well as before starting wheels of the trailer will travelcloser to the inside of the curve than■ Practicing driving with a coupledthe wheels of the vehicle. To maketrailerallowance for this, take the turns wider Get the feel for turning, stoppingthan you would normally reversing with the trailer cou-■ Important
4-1. Before driving
189
mal driving.
counterclockwise to turn it right.
● Retighten all bolts securing the hitching
Always rotate a little at a time to
ball and bracket after towing for approxi-
prevent steering error. Have some-
mately 1000 km (600 miles).
one guide you when reversing to
lessen the risk of an accident.
NOTICE
■ Increasing vehicle-to-vehicle dis-
■ When the rear bumper strengthen-
tance
ing material is aluminum
Ensure the steel bracket part does not
At a speed of 10 km/h (6 mph), the dis-
come directly in contact with that area.
tance to the vehicle running ahead of
When steel and aluminum come into
you should be equivalent to or greater
contact, there is a reaction similar to cor-
rosion, which will weaken the section
than the combined length of your vehi-
concerned and may result in damage.
cle and trailer. Avoid sudden braking
Apply a rust inhibitor to parts that will
come in contact when attaching a steel
that may cause skidding. Otherwise,
bracket.
the vehicle may spin out of control. This
is especially true when driving on wet
4
Guidance
or slippery road surfaces.
■ Sudden acceleration/steering
Your vehicle will handle differently
Driving
input/cornering
when towing a trailer. In order to avoid
accident, death or serious injury, keep
Executing sharp turns when towing
the following in mind when towing:
may result in the trailer colliding with
your vehicle. Decelerate well in
■ Checking connections between
advance when approaching turns and
trailer and lights
take them slowly and carefully to avoid
Stop the vehicle and check the opera-
sudden braking.
tion of the connection between the
■ Important points regarding turning
trailer and lights after driving for a brief
period as well as before starting off.
The wheels of the trailer will travel
closer to the inside of the curve than
■ Practicing driving with a coupled
the wheels of the vehicle. To make
trailer
allowance for this, take the turns wider
 Get the feel for turning, stopping
than you would normally do.
and reversing with the trailer cou-
■ Important points regarding stabil-
pled by practicing in an area with no
ity
or light traffic.
Vehicle movement resulting from
 When reversing with a coupled
uneven road surfaces and strong
trailer, hold the section of the steer-
crosswinds will affect handling. The
ing wheel nearest to you and rotate
vehicle may also be rocked by passing
clockwise to turn the trailer left or
buses or large trucks. Frequently
1904-1. Before drivingcheck behind when moving alongside■ Trailer towing precautionssuch vehicles. As soon as such vehicleWhen towing, make sure that none of themovement occurs, immediately start toweight limits are exceeded. (P.185)decelerate smoothly by slowly apply-■ To avoid accident or injurying the brakes. Always steer the vehi-● Vehicles with compact spare tire:cle straight ahead while not tow a trailer when the compactspare tire is installed on your vehicle.■ Passing other vehicles● Vehicles with emergency tire punc-Consider the total combined length ofture repair kit:your vehicle and trailer and ensure thatDo not tow a trailer when the tireinstalled is repaired with the emer-the vehicle-to-vehicle distance is suffi-gency tire puncture repair before executing lane changes.● Do not use the following systems when■ Hybrid transmission informationtrailer maintain engine braking efficiency• Cruise control (if equipped)and charging system performance• Dynamic radar cruise control with full-speed range (if equipped)when using engine braking, do not usethe hybrid transmission in D. (P.197)■ Vehicle speed in towing■ If the engine overheatsObserve the legal maximum speeds fortrailer a loaded trailer up a long,■ Before descending hills or longsteep incline in temperatures exceed-declinesing 30°C (85°F) may result in theReduce speed and downshift. However,engine overheating. If the engine cool-never downshift suddenly whileant temperature gauge indicates thatdescending steep or long engine is overheating, turn the airconditioning off immediately, leave the■ Operation of the brake pedalroad and stop the vehicle in a safeDo not hold the brake pedal depressedoften or for long periods of . (P.539)Doing so may result in the brake over-■ When parking the vehicleheating or reduce braking place wheel chocks under thewheels of both the vehicle and the parking brake and shift t
190
4-1. Before driving
check behind when moving alongside
■ Trailer towing precautions
such vehicles. As soon as such vehicle
When towing, make sure that none of the
movement occurs, immediately start to
weight limits are exceeded. (P.185)
decelerate smoothly by slowly apply-
■ To avoid accident or injury
ing the brakes. Always steer the vehi-
● Vehicles with compact spare tire:
cle straight ahead while braking.
Do not tow a trailer when the compact
spare tire is installed on your vehicle.
■ Passing other vehicles
● Vehicles with emergency tire punc-
Consider the total combined length of
ture repair kit:
your vehicle and trailer and ensure that
Do not tow a trailer when the tire
installed is repaired with the emer-
the vehicle-to-vehicle distance is suffi-
gency tire puncture repair kit.
cient before executing lane changes.
● Do not use the following systems when
■ Hybrid transmission information
trailer towing.
To maintain engine braking efficiency
• Cruise control (if equipped)
and charging system performance
• Dynamic radar cruise control with full-
speed range (if equipped)
when using engine braking, do not use
the hybrid transmission in D. (P.197)
■ Vehicle speed in towing
■ If the engine overheats
Observe the legal maximum speeds for
trailer towing.
Towing a loaded trailer up a long,
■ Before descending hills or long
steep incline in temperatures exceed-
declines
ing 30°C (85°F) may result in the
Reduce speed and downshift. However,
engine overheating. If the engine cool-
never downshift suddenly while
ant temperature gauge indicates that
descending steep or long downhill
grades.
the engine is overheating, turn the air
conditioning off immediately, leave the
■ Operation of the brake pedal
road and stop the vehicle in a safe
Do not hold the brake pedal depressed
often or for long periods of time.
place. (P.539)
Doing so may result in the brake over-
■ When parking the vehicle
heating or reduce braking effects.
Always place wheel chocks under the
wheels of both the vehicle and trailer.
Set the parking brake and shift the shift
lever to P.
WARNING
Follow all the instructions described in
this section.
Failure to do so could cause an accident
resulting in death or serious injury.
4-2. Driving procedures191power switch mode.4-2.Driving proceduresPower (ignition) switchPerforming the following opera-tions when carrying the electronickey on your person starts the hybridsystem or changes power the hybrid system4 Check that the “READY” indicatoris illuminated.1 Pull the parking brake switch tocheck that the parking brake is vehicle cannot be driven if the(P.205)“READY” indicator is Parking brake indicator will come on.■ Power switch illumination2 Firmly depress the brake pedal.4According to the situation, the powerswitch illumination operates as a message will be displayed on● When a front door is opened, or theDrivingthe multi-information switch mode is changed fromACC or ON to OFF, the power switchIf it is not displayed, the hybrid system can-illumination illuminates be started.● When depressing the brake pedal withWhen the shift position is N, the hybrid sys-carrying the electronic key on your per-tem cannot start. Shift the shift position to Pson, the power switch illumination illumi-when starting the hybrid system. (P.198)nates brightly.3 Press the power switch shortly and● When the power switch is in ACC , the power switch illumination operating the power switch, oneshort, firm press is enough. It is not neces-■ If the hybrid system does not startsary to press and hold the switch.● The immobilizer system may not haveIf the “READY” indicator turns on, thebeen deactivated. (P.85)hybrid system will operate any authorized Lexus retailer orLexus authorized repairer, or any reliableContinue depressing the brake pedal “READY” indicator is illuminated.● If a message related to start-up is shownThe hybrid system can be started from anyon the multi-information display, read themessage and follow the instructions.● If the door is unlocked with the mechani-cal key, the hybrid system cannot bestarted using the smart
4-2. Driving procedures
191
power switch mode.
4-2.Driving procedures
Power (ignition) switch
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
4 Check that the “READY” indicator
is illuminated.
1 Pull the parking brake switch to
check that the parking brake is set.
The vehicle cannot be driven if the
(P.205)
“READY” indicator is off.
The Parking brake indicator will come on.
■ Power switch illumination
2 Firmly depress the brake pedal.
4
According to the situation, the power
switch illumination operates as follows.
and a message will be displayed on
● When a front door is opened, or the
Driving
the multi-information display.
power switch mode is changed from
ACC or ON to OFF, the power switch
If it is not displayed, the hybrid system can-
illumination illuminates dimly.
not be started.
● When depressing the brake pedal with
When the shift position is N, the hybrid sys-
carrying the electronic key on your per-
tem cannot start. Shift the shift position to P
son, the power switch illumination illumi-
when starting the hybrid system. (P.198)
nates brightly.
3 Press the power switch shortly and
● When the power switch is in ACC or
firmly.
ON, the power switch illumination illumi-
nates.
When operating the power switch, one
short, firm press is enough. It is not neces-
■ If the hybrid system does not start
sary to press and hold the switch.
● The immobilizer system may not have
If the “READY” indicator turns on, the
been deactivated. (P.85)
hybrid system will operate normally.
Contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
Continue depressing the brake pedal until
repairer.
the “READY” indicator is illuminated.
● If a message related to start-up is shown
The hybrid system can be started from any
on the multi-information display, read the
message and follow the instructions.
● If the door is unlocked with the mechani-
cal key, the hybrid system cannot be
started using the smart entry & start sys-
tem. Refer to P.529 to start the hybrid
system. However, if the 0electronic key is
carried inside the vehicle and the doors
are locked (P.136), the hybrid system
1924-2. Driving procedurescan be started.● To prevent the steering lock motor fromoverheating, operation of the motor may■ When the ambient temperature is low,be suspended if the hybrid system issuch as during winter driving conditionsturned on and off repeatedly in a shortWhen starting the hybrid system, the flash-period of time. In this case, refrain froming time of the “READY” indicator may beoperating the hybrid system. After aboutlong. Leave the vehicle as it is until the10 seconds, the steering lock motor will“READY” indicator is steady on, as steadyresume the vehicle is able to move.■ When “Smart Entry & Start System Mal-■ Sounds and vibrations specific to afunction See Owner’s Manual” is dis-Hybrid Electric Vehicleplayed on the multi-information displayP.78The system may be malfunctioning. Havethe vehicle inspected by any authorized■ If the 12-volt battery is dischargedLexus retailer or Lexus authorized repairer,The hybrid system cannot be started usingor any reliable repairer smart entry & start system. Refer to■ If the “READY” indicator does notP.533 to restart the hybrid on■ Electronic key battery depletionIn the event that the “READY” indicatorP.128does not come on even after performingthe proper procedures for starting the vehi-■ Conditions affecting operationcle, contact any authorized Lexus retailerP.151or Lexus authorized repairer, or any reli-able repairer immediately.■ Note for the entry functionP.152■ If the hybrid system is malfunctioningP.83■ Steering lock function (if equipped)■ Electronic key battery● After turning the power switch off andopening and closing the doors, the steer-P.474ing wheel will be locked due to the steer-■ Operation of the power switching lock function. Operating the powerswitch again automatically cancels the● If the switch is not pressed shortly andsteering , the power switch mode may notchange or the hybrid system may not● When the steering lock cannot besta
192
4-2. Driving procedures
can be started.
● To prevent the steering lock motor from
overheating, operation of the motor may
■ When the ambient temperature is low,
be suspended if the hybrid system is
such as during winter driving conditions
turned on and off repeatedly in a short
When starting the hybrid system, the flash-
period of time. In this case, refrain from
ing time of the “READY” indicator may be
operating the hybrid system. After about
long. Leave the vehicle as it is until the
10 seconds, the steering lock motor will
“READY” indicator is steady on, as steady
resume functioning.
means the vehicle is able to move.
■ When “Smart Entry & Start System Mal-
■ Sounds and vibrations specific to a
function See Owner’s Manual” is dis-
Hybrid Electric Vehicle
played on the multi-information display
P.78
The system may be malfunctioning. Have
the vehicle inspected by any authorized
■ If the 12-volt battery is discharged
Lexus retailer or Lexus authorized repairer,
The hybrid system cannot be started using
or any reliable repairer immediately.
the smart entry & start system. Refer to
■ If the “READY” indicator does not
P.533 to restart the hybrid system.
come on
■ Electronic key battery depletion
In the event that the “READY” indicator
P.128
does not come on even after performing
the proper procedures for starting the vehi-
■ Conditions affecting operation
cle, contact any authorized Lexus retailer
P.151
or Lexus authorized repairer, or any reli-
able repairer immediately.
■ Note for the entry function
P.152
■ If the hybrid system is malfunctioning
P.83
■ Steering lock function (if equipped)
■ Electronic key battery
● After turning the power switch off and
opening and closing the doors, the steer-
P.474
ing wheel will be locked due to the steer-
■ Operation of the power switch
ing lock function. Operating the power
switch again automatically cancels the
● If the switch is not pressed shortly and
steering lock.
firmly, the power switch mode may not
change or the hybrid system may not
● When the steering lock cannot be
start.
released, “Push POWER Switch while
Turning the Steering Wheel in Either
● If attempting to restart the hybrid system
Direction” will be displayed on the multi-
immediately after turning the power
information display.
switch off, the hybrid system may not start
Press the power switch shortly and firmly
in some cases. After turning the power
while turning the steering wheel left and
switch off, please wait a few seconds
right.
before restarting the hybrid system.
■ Customization
If the smart entry & start system has been
deactivated in a customized setting, refer to
P.528.
4-2. Driving procedures193Check that the shift position indicatorWARNINGshows P and the parking brake indicator isilluminated.■ When starting the hybrid system4 Press the power start the hybrid system while sit-ting in the driver’s seat. Do not depressThe hybrid system will stop, and the meterthe accelerator pedal while starting thedisplay will be extinguished (the shift posi-hybrid system under any indicator will be extinguished a fewDoing so may cause an accident result-seconds after the meter display).ing in death or serious injury.5 Release the brake pedal and check■ Caution while driving (vehicles withthat “ACCESSORY” or “POWERsteering lock function)ON” is not shown on the hybrid system failure occurs while thevehicle is moving, do not lock or openthe doors until the vehicle reaches a safe■ When the shift control system malfunc-and complete stop. Activation of thetionssteering lock in this circumstance mayIf the shift control system is malfunctioning,lead to an accident, resulting in death orwhen attempting to turn the power switchserious , it may not be able to be turned off. In thissituation, it may be possible to turn the4power switch off by applying the parkingNOTICEbrake and then operating the power ■ When starting the hybrid systemIf there is a malfunction in the system, havethe vehicle inspected by any authorizedIf the hybrid system becomes difficult toLexus retailer or Lexus authorized repairer,start, have your vehicle checked by anyor any reliable repairer Lexus retailer or Lexusauthorized repairer, or any reliablerepairer ■ Symptoms indicating a malfunction■ Stopping the hybrid system in anwith the power switchemergencyIf the power switch seems to be operat-● If you want to stop the hybrid system ining somewhat differently than usual, suchan emergency while driving the vehi-as the switch sticking slightly, there maycle, press and hold the power
4-2. Driving procedures
193
Check that the shift position indicator
WARNING
shows P and the parking brake indicator is
illuminated.
■ When starting the hybrid system
4 Press the power switch.
Always start the hybrid system while sit-
ting in the driver’s seat. Do not depress
The hybrid system will stop, and the meter
the accelerator pedal while starting the
display will be extinguished (the shift posi-
hybrid system under any circumstances.
tion indicator will be extinguished a few
Doing so may cause an accident result-
seconds after the meter display).
ing in death or serious injury.
5 Release the brake pedal and check
■ Caution while driving (vehicles with
that “ACCESSORY” or “POWER
steering lock function)
ON” is not shown on the meter.
If hybrid system failure occurs while the
vehicle is moving, do not lock or open
the doors until the vehicle reaches a safe
■ When the shift control system malfunc-
and complete stop. Activation of the
tions
steering lock in this circumstance may
If the shift control system is malfunctioning,
lead to an accident, resulting in death or
when attempting to turn the power switch
serious injury.
off, it may not be able to be turned off. In this
situation, it may be possible to turn the
4
power switch off by applying the parking
NOTICE
brake and then operating the power switch.
Driving
■ When starting the hybrid system
If there is a malfunction in the system, have
the vehicle inspected by any authorized
If the hybrid system becomes difficult to
Lexus retailer or Lexus authorized repairer,
start, have your vehicle checked by any
or any reliable repairer immediately.
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer immediately.
WARNING
■ Symptoms indicating a malfunction
■ Stopping the hybrid system in an
with the power switch
emergency
If the power switch seems to be operat-
● If you want to stop the hybrid system in
ing somewhat differently than usual, such
an emergency while driving the vehi-
as the switch sticking slightly, there may
cle, press and hold the power switch
be a malfunction. Contact any autho-
for more than 2 seconds, or press it
rized Lexus retailer or Lexus authorized
briefly 3 times or more in succession.
repairer, or any reliable repairer immedi-
(P.482)
ately.
However, do not touch the power
switch while driving except in an emer-
gency. Turning the hybrid system off
Stopping the hybrid system
while driving will not cause loss of
steering or braking control. However,
1 Stop the vehicle completely.
power assist for the steering wheel
may be lost making it difficult to steer
2 If the parking brake is in manual
smoothly before stopping the vehicle
mode, set the parking brake.
depending on the remaining charge in
the 12-volt battery or usage conditions.
(P.205)
In this situation, you should pull over
and stop the vehicle as soon as it is safe
3 Press the P position switch.
to do so.
(P.198)
1944-2. Driving proceduresAll electrical components can be “POWER ON” will be displayed on the● If the power switch is operated vehicle is running, a warning mes-*: ACC mode can be enabled/disabled onsage will be shown on the multi-infor-mation display and a buzzer customize menu. (P.570)● When restarting the hybrid system■ When ACC customization is in offafter an emergency shutdown, pressthe power switch shortly and firmly.● With the power switch turned off, themultimedia system can still be used for acertain time until the battery saving func-Changing power switch modestion starts operating.● When the safe exit assist is operating, aModes can be changed by pressingbuzzer will sound and a voice guidancewill be power switch with brake pedalreleased. (The mode changes each■ Auto power off functiontime the switch is pressed.)● If the vehicle is left in ACC or ON (thehybrid system is not operating) for morethan 20 minutes with the shift position inP, the power switch will automaticallyturn to OFF.● If the 12-volt battery is low with the shiftposition is in P and the power switch is inACC or ON (the hybrid system is notoperating), a buzzer sounds and a mes-sage will be displayed on the multi-infor-mation display. If this continues, thepower switch is automatically turn , this function cannot entirely pre-vent the 12-volt battery discharge. Do notleave the vehicle with the power switch inACC or ON for long periods of time whenthe hybrid system is not operating.A “ACCESSORY”B “POWER ON”NOTICE1 OFF■ To prevent 12-volt battery dischargeThe emergency flashers can be used.● Do not leave the power switch in ACC2 ACC *or ON for long periods of time withoutthe hybrid system electrical components such as the● If “ACCESSORY” or “POWER ON”power outlets can be displayed on the meter, the power“ACCESSORY” will be displayed on theswitch is not in OFF. Exit the turning the power switch to O
194
4-2. Driving procedures
All electrical components can be used.
WARNING
“POWER ON” will be displayed on the
● If the power switch is operated while
meter.
the vehicle is running, a warning mes-
*
: ACC mode can be enabled/disabled on
sage will be shown on the multi-infor-
mation display and a buzzer sounds.
the customize menu. (P.570)
● When restarting the hybrid system
■ When ACC customization is in off
after an emergency shutdown, press
the power switch shortly and firmly.
● With the power switch turned off, the
multimedia system can still be used for a
certain time until the battery saving func-
Changing power switch modes
tion starts operating.
● When the safe exit assist is operating, a
Modes can be changed by pressing
buzzer will sound and a voice guidance
will be given.
the power switch with brake pedal
released. (The mode changes each
■ Auto power off function
time the switch is pressed.)
● If the vehicle is left in ACC or ON (the
hybrid system is not operating) for more
than 20 minutes with the shift position in
P, the power switch will automatically
turn to OFF.
● If the 12-volt battery is low with the shift
position is in P and the power switch is in
ACC or ON (the hybrid system is not
operating), a buzzer sounds and a mes-
sage will be displayed on the multi-infor-
mation display. If this continues, the
power switch is automatically turn to
OFF.
However, this function cannot entirely pre-
vent the 12-volt battery discharge. Do not
leave the vehicle with the power switch in
ACC or ON for long periods of time when
the hybrid system is not operating.
A “ACCESSORY”
B “POWER ON”
NOTICE
1 OFF
■ To prevent 12-volt battery discharge
The emergency flashers can be used.
● Do not leave the power switch in ACC
2 ACC *
or ON for long periods of time without
the hybrid system on.
Some electrical components such as the
● If “ACCESSORY” or “POWER ON”
power outlets can be used.
is displayed on the meter, the power
“ACCESSORY” will be displayed on the
switch is not in OFF. Exit the vehicle
meter.
after turning the power switch to OFF.
3 ON
4-2. Driving procedures195message will be shown on the multi-infor-EV drive modemation display.● The temperature of the hybrid system isIn EV drive mode, electric power vehicle has been left in the sun,supplied by the hybrid batterydriven on a hill, driven at high speeds, etc.(traction battery), and only the● The temperature of the hybrid system iselectric motor (traction motor) to drive the vehicle has been left in temperatureslower than about 0°C (32°F) for a longThis mode allows you to drive in res-period of time, areas early in the morning● The gasoline engine is warming late at night, or in indoor park-● The hybrid battery (traction battery) ising lots, etc., without concern and gas remaining battery level indicated inthe energy monitor display is the Acoustic Vehicle Alert-(P.121)ing System is active, the vehicle● Vehicle speed is produce sound.● The accelerator pedal is depressed firmly4or the vehicle is on a hill, etc.● The windshield defogger is in instructionsDriving■ Switching to EV drive mode when thegasoline engine is coldIf the hybrid system is started while the gas-oline engine is cold, the gasoline engine willstart automatically after a short period oftime in order to warm up. In this case, youwill become unable to switch to EV the hybrid system has started and the“READY” indicator has illuminated, pressthe EV drive mode switch before the gaso-line engine starts to switch to EV EV drive mode on/off■ Automatic cancelation of EV driveWhen EV drive mode is turned on, the EVmodedrive mode indicator will come driving in EV drive mode, the gaso-Pressing the switch when in EV drive modeline engine may automatically restart in thewill return the vehicle to normal drivingfollowing situations. When EV drive mode(using the gasoline engine and electricis canceled, a buzzer will sound, the EVdrive mode indicato
4-2. Driving procedures
195
message will be shown on the multi-infor-
EV drive mode
mation display.
● The temperature of the hybrid system is
In EV drive mode, electric power is
high.
The vehicle has been left in the sun,
supplied by the hybrid battery
driven on a hill, driven at high speeds, etc.
(traction battery), and only the
● The temperature of the hybrid system is
electric motor (traction motor) is
low.
used to drive the vehicle.
The vehicle has been left in temperatures
lower than about 0°C (32°F) for a long
This mode allows you to drive in res-
period of time, etc.
idential areas early in the morning
● The gasoline engine is warming up.
and late at night, or in indoor park-
● The hybrid battery (traction battery) is
ing lots, etc., without concern for
low.
noises and gas emissions.
The remaining battery level indicated in
the energy monitor display is low.
When the Acoustic Vehicle Alert-
(P.121)
ing System is active, the vehicle
● Vehicle speed is high.
may produce sound.
● The accelerator pedal is depressed firmly
4
or the vehicle is on a hill, etc.
● The windshield defogger is in use.
Operating instructions
Driving
■ Switching to EV drive mode when the
gasoline engine is cold
If the hybrid system is started while the gas-
oline engine is cold, the gasoline engine will
start automatically after a short period of
time in order to warm up. In this case, you
will become unable to switch to EV drive
mode.
After the hybrid system has started and the
“READY” indicator has illuminated, press
the EV drive mode switch before the gaso-
line engine starts to switch to EV drive
mode.
Turns EV drive mode on/off
■ Automatic cancelation of EV drive
When EV drive mode is turned on, the EV
mode
drive mode indicator will come on.
When driving in EV drive mode, the gaso-
Pressing the switch when in EV drive mode
line engine may automatically restart in the
will return the vehicle to normal driving
following situations. When EV drive mode
(using the gasoline engine and electric
is canceled, a buzzer will sound, the EV
drive mode indicator will go off after flash-
motor [traction motor]).
ing, and a message is displayed on the
multi-information display.
■ Situations in which EV drive mode can-
● The hybrid battery (traction battery)
not be turned on
becomes low.
It may not be possible to turn EV drive
The remaining battery level indicated in
mode on in the following situations. If it can-
the energy monitor display is low.
not be turned on, a buzzer will sound and a
(P.121)
1964-2. Driving procedures● Vehicle speed is ● The accelerator pedal is depressed firmly■ Caution while drivingor the vehicle is on a hill, driving in EV drive mode, pay spe-■ Possible driving distance when drivingcial attention to the area around the vehi-in EV drive modecle. Because there is no engine noise,EV drive mode’s possible driving distancepedestrians, people riding bicycles orranges from a few hundred meters toother people and vehicles in the areaapproximately 1 km (0.6 mile). However,may not be aware of the vehicle startingdepending on vehicle conditions, there areoff or approaching them. Take extra caresituations when EV drive mode cannot bewhile driving even if the Acoustic Vehicleused. (The distance that is possible dependsAlerting System is the hybrid battery [traction battery] leveland driving conditions.)■ Fuel economyThe hybrid system is designed to achievethe best possible fuel economy during nor-mal driving (using the gasoline engine andelectric motor [traction motor]). Driving inEV drive mode more than necessary maylower fuel economy.■ If “EV Mode Unavailable” is shown onthe multi-information displayThe EV drive mode is not available. Thereason the EV drive mode is not available(the vehicle is idling, battery charge is low,vehicle speed is higher than the EV drivemode operating speed range or accelera-tor pedal is depressed too much) may bedisplayed. Use the EV drive mode when itbecomes available.■ If “EV Mode Deactivated” is shown onthe multi-information displayThe EV drive mode has been automaticallycanceled. The reason the EV drive mode isnot available (the battery charge is low,vehicle speed is higher than the EV drivemode operating speed range or accelera-tor pedal is depressed too much) may bedisplayed. Drive the vehicle for a whilebefore attempting to turn on the EV drivemode again.
196
4-2. Driving procedures
● Vehicle speed is high.
WARNING
● The accelerator pedal is depressed firmly
■ Caution while driving
or the vehicle is on a hill, etc.
When driving in EV drive mode, pay spe-
■ Possible driving distance when driving
cial attention to the area around the vehi-
in EV drive mode
cle. Because there is no engine noise,
EV drive mode’s possible driving distance
pedestrians, people riding bicycles or
ranges from a few hundred meters to
other people and vehicles in the area
approximately 1 km (0.6 mile). However,
may not be aware of the vehicle starting
depending on vehicle conditions, there are
off or approaching them. Take extra care
situations when EV drive mode cannot be
while driving even if the Acoustic Vehicle
used. (The distance that is possible depends
Alerting System is active.
on the hybrid battery [traction battery] level
and driving conditions.)
■ Fuel economy
The hybrid system is designed to achieve
the best possible fuel economy during nor-
mal driving (using the gasoline engine and
electric motor [traction motor]). Driving in
EV drive mode more than necessary may
lower fuel economy.
■ If “EV Mode Unavailable” is shown on
the multi-information display
The EV drive mode is not available. The
reason the EV drive mode is not available
(the vehicle is idling, battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Use the EV drive mode when it
becomes available.
■ If “EV Mode Deactivated” is shown on
the multi-information display
The EV drive mode has been automatically
canceled. The reason the EV drive mode is
not available (the battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Drive the vehicle for a while
before attempting to turn on the EV drive
mode again.
4-2. Driving procedures197TransmissionShift posi-Objective or functiontionSelect the shift position dependingNeutralN(Condition in which theon your purpose and is not transmitted)Normal driving *1DShift position purpose and func-tionsS mode driving *2 (P.203)S Vehicles without paddle shift*1: To improve fuel efficiency and reduceswitchesnoise, set the shift position in D for nor-mal driving. You can choose gear rangeShift posi-suitable for your driving situation byObjective or functiontionoperating the paddle shift switches.*2Parking the vehicle/starting: By selecting shift ranges using S mode,Pthe hybrid systemyou can control accelerating force and4engine braking ■ When driving with dynamic radar cruiseDrivingN(Condition in which thecontrol activated (vehicles with paddleshift switches)power is not transmitted)Even when performing the downshifting toNormal driving *D5 or 4 with the intent of enabling enginebraking while driving in D or S mode,Applying engine braking orengine braking will not activate becausestrong braking when thedynamic radar cruise control with full-Baccelerator pedal has beenspeed range will not be canceled.(P.202)released on steep downwardslopes etc.■ If a message about a shift operation isshown*: To improve fuel efficiency and reduceTo prevent the shift position from beingnoise, set the shift position in D for nor-selected incorrectly or the vehicle frommal unexpectedly, the shift position maybe changed automatically or operating the Vehicles with paddle shift switchesshift lever may be required. In this case,change the shift position following the mes-Shift posi-sages on the multi-information or functiontion■ Restraining sudden start (Drive-StartControl)Parking the vehicle/startingPP.182the hybrid systemRReversing
4-2. Driving procedures
197
Transmission
Shift posi-
Objective or function
tion
Select the shift position depending
Neutral
N
(Condition in which the
on your purpose and situation.
power is not transmitted)
Normal driving *1
D
Shift position purpose and func-
tions
S mode driving *2 (P.203)
S
 Vehicles without paddle shift
*1
: To improve fuel efficiency and reduce
switches
noise, set the shift position in D for nor-
mal driving. You can choose gear range
Shift posi-
suitable for your driving situation by
Objective or function
tion
operating the paddle shift switches.
*2
Parking the vehicle/starting
: By selecting shift ranges using S mode,
P
the hybrid system
you can control accelerating force and
4
engine braking force.
R
Reversing
Neutral
■ When driving with dynamic radar cruise
Driving
N
(Condition in which the
control activated (vehicles with paddle
shift switches)
power is not transmitted)
Even when performing the downshifting to
Normal driving *
D
5 or 4 with the intent of enabling engine
braking while driving in D or S mode,
Applying engine braking or
engine braking will not activate because
strong braking when the
dynamic radar cruise control with full-
B
accelerator pedal has been
speed range will not be canceled.
(P.202)
released on steep downward
slopes etc.
■ If a message about a shift operation is
shown
*
: To improve fuel efficiency and reduce
To prevent the shift position from being
noise, set the shift position in D for nor-
selected incorrectly or the vehicle from
mal driving.
moving unexpectedly, the shift position may
be changed automatically or operating the
 Vehicles with paddle shift switches
shift lever may be required. In this case,
change the shift position following the mes-
Shift posi-
sages on the multi-information display.
Objective or function
tion
■ Restraining sudden start (Drive-Start
Control)
Parking the vehicle/starting
P
P.182
the hybrid system
R
Reversing
1984-2. Driving proceduresShift position display and how toWARNINGchange the shift position■ When driving on slippery road sur-faces Vehicles without paddle shiftDo not accelerate or shift the shift posi-switchestion changes in engine braking maycause the vehicle to spin or skid, resultingin an ■ Hybrid battery (traction battery)chargeIf the shift position is in N, the hybrid bat-tery (traction battery) will not becharged. To help prevent the batteryfrom discharging, avoid leaving the Nposition selected for a certain amount oftime.■ Situations where shift control systemmalfunctions are possibleIf any of the following situations occurs,shift control system malfunctions stop the vehicle in a safeplace on level ground, apply the parkingA Shift leverbrake, and then contact any authorizedLexus retailer or Lexus authorizedOperate the shift lever gently and securelyrepairer, or any reliable the direction of the arrow on the shiftposition indicator.● When the warning message indicatingthe shift control system appears on theTo shift to N, slide the shift lever in themulti-information display. (P.499)direction of the arrow and hold the shift lever after each shifting● The display indicates that no shift posi-tion is selected for more than a fewoperation to allow it to return to its ( ).Shifting to B is only possible when the shiftposition is in shifting from P to N, D or R, from N,D, B or R to P, from D or B to R, or from Rto D, ensure that the brake pedal is beingdepressed and the vehicle is stationary.B P position switchFully stop the vehicle and set the parking
198
4-2. Driving procedures
Shift position display and how to
WARNING
change the shift position
■ When driving on slippery road sur-
faces
 Vehicles without paddle shift
Do not accelerate or shift the shift posi-
switches
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
■ Hybrid battery (traction battery)
charge
If the shift position is in N, the hybrid bat-
tery (traction battery) will not be
charged. To help prevent the battery
from discharging, avoid leaving the N
position selected for a certain amount of
time.
■ Situations where shift control system
malfunctions are possible
If any of the following situations occurs,
shift control system malfunctions are
possible.
Immediately stop the vehicle in a safe
place on level ground, apply the parking
A Shift lever
brake, and then contact any authorized
Lexus retailer or Lexus authorized
Operate the shift lever gently and securely
repairer, or any reliable repairer.
in the direction of the arrow on the shift
position indicator.
● When the warning message indicating
the shift control system appears on the
To shift to N, slide the shift lever in the
multi-information display. (P.499)
direction of the arrow and hold it.
Release the shift lever after each shifting
● The display indicates that no shift posi-
tion is selected for more than a few
operation to allow it to return to its regular
seconds.
position ( ).
Shifting to B is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, B or R to P, from D or B to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
B P position switch
Fully stop the vehicle and set the parking
4-2. Driving procedures199brake, and then press the P position the shift lever after each shiftingoperation to allow it to return to its regularWhen the shift position is changed to P, theswitch ( ).Check that the shift position indicatorShifting to S is only possible when the shiftshows is in shifting from P to N, D or R, from N,C Shift position indicatorD, S or R to P, from D or S to R, or from RMeter display:to D, ensure that the brake pedal is beingThe current shift position is and the vehicle is lever display:B P position switchThe current shift position is stop the vehicle and set the parkingWhen selecting the shift position, makebrake, and then press the P position that the shift position has beenWhen the shift position is changed to P, thechanged to the desired position by check-switch the shift position indicator provided onthe instrument that the shift position indicatorshows P.4 Vehicles with paddle shift switchesC Shift position indicatorDrivingMeter display:The current shift position is lever display:The current shift position is selecting the shift position, makesure that the shift position has beenchanged to the desired position by check-ing the shift position indicator provided onthe instrument cluster.■ Changing the shift position in eachpower switch mode● The shift position cannot be changedwhen the power switch is in ACC or off.● When the power switch is in ON, if theREADY indicator is not illuminated, theshift position can only be changed to N.● When the READY indicator is illumi-A Shift levernated, the shift position can be changedOperate the shift lever gently and securelyfrom P to D, N, or the direction of the arrow on the shift● When the READY indicator is flashing,position shift position cannot be changed fromP to any other position, eve
4-2. Driving procedures
199
brake, and then press the P position switch.
Release the shift lever after each shifting
operation to allow it to return to its regular
When the shift position is changed to P, the
switch illuminates.
position ( ).
Check that the shift position indicator
Shifting to S is only possible when the shift
shows P.
position is in D.
When shifting from P to N, D or R, from N,
C Shift position indicator
D, S or R to P, from D or S to R, or from R
Meter display:
to D, ensure that the brake pedal is being
The current shift position is illuminated.
depressed and the vehicle is stationary.
Shift lever display:
B P position switch
The current shift position is illuminated.
Fully stop the vehicle and set the parking
When selecting the shift position, make
brake, and then press the P position switch.
sure that the shift position has been
When the shift position is changed to P, the
changed to the desired position by check-
switch illuminates.
ing the shift position indicator provided on
the instrument cluster.
Check that the shift position indicator
shows P.
4
 Vehicles with paddle shift switches
C Shift position indicator
Driving
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
■ Changing the shift position in each
power switch mode
● The shift position cannot be changed
when the power switch is in ACC or off.
● When the power switch is in ON, if the
READY indicator is not illuminated, the
shift position can only be changed to N.
● When the READY indicator is illumi-
A Shift lever
nated, the shift position can be changed
Operate the shift lever gently and securely
from P to D, N, or R.
in the direction of the arrow on the shift
● When the READY indicator is flashing,
position indicator.
the shift position cannot be changed from
P to any other position, even if the shift
To shift to N, slide the shift lever in the
lever is operated. Operate the shift lever
direction of the arrow and hold it.
again after the READY indicator
2004-2. Driving procedures*2changes from flashing to illuminated.: Vehicles with paddle shift switches■ Shifting the shift position from P to other■ The shift position automatically changespositionsto N when● While depressing the brake pedal firmly,In the following situations, a buzzer willoperate the shift lever. If the shift lever issound to inform you that the shift positionoperated without depressing the brakehas been changed to N. Use the appropri-pedal, the buzzer will sound and the shift-ate operation to attempt to change the shifting operation will be again.● When selecting the shift position, make● When attempting to change the shiftsure that the shift position has beenposition to R while the vehicle is movingchanged to the desired position byforwardchecking the shift position indicator pro-When driving at a low speed, the shift posi-vided on the instrument may change to R.● The shift position cannot be changedfrom P to B *1 or S *2 directly.● When attempting to change the shiftposition to D while the vehicle is moving*1: Vehicles without paddle shift switchesbackward*2 : Vehicles with paddle shift switchesWhen driving at a low speed, the shift posi-tion may change to D.■ The shift position cannot be changedwhen● When attempting to change the shiftposition from R to B *1 or S *2In the following situations, a buzzer willsound to inform you that the shift position*1: Vehicles without paddle shift switchescannot be changed. Use the appropriate*2 : Vehicles with paddle shift switchesoperation to attempt to change the shiftposition again.■ If the N shift position is selected while● When attempting to change the shiftdrivingposition from P with the brake pedal notIf the shift lever is moved to N while drivingdepressedabove a certain speed, the shift position will● When attempting to change the shiftchange to N without holding the shift leverposition from P with the acceleratorin the N position. In this situation, a buzzerpedal depre
200
4-2. Driving procedures
*2
changes from flashing to illuminated.
: Vehicles with paddle shift switches
■ Shifting the shift position from P to other
■ The shift position automatically changes
positions
to N when
● While depressing the brake pedal firmly,
In the following situations, a buzzer will
operate the shift lever. If the shift lever is
sound to inform you that the shift position
operated without depressing the brake
has been changed to N. Use the appropri-
pedal, the buzzer will sound and the shift-
ate operation to attempt to change the shift
ing operation will be disabled.
position again.
● When selecting the shift position, make
● When attempting to change the shift
sure that the shift position has been
position to R while the vehicle is moving
changed to the desired position by
forward
checking the shift position indicator pro-
When driving at a low speed, the shift posi-
vided on the instrument cluster.
tion may change to R.
● The shift position cannot be changed
from P to B *1 or S *2 directly.
● When attempting to change the shift
position to D while the vehicle is moving
*1
: Vehicles without paddle shift switches
backward
*2 : Vehicles with paddle shift switches
When driving at a low speed, the shift posi-
tion may change to D.
■ The shift position cannot be changed
when
● When attempting to change the shift
position from R to B *1 or S *2
In the following situations, a buzzer will
sound to inform you that the shift position
*1
: Vehicles without paddle shift switches
cannot be changed. Use the appropriate
*2 : Vehicles with paddle shift switches
operation to attempt to change the shift
position again.
■ If the N shift position is selected while
● When attempting to change the shift
driving
position from P with the brake pedal not
If the shift lever is moved to N while driving
depressed
above a certain speed, the shift position will
● When attempting to change the shift
change to N without holding the shift lever
position from P with the accelerator
in the N position. In this situation, a buzzer
pedal depressed
will sound and a message will be displayed
● When attempting to change the shift
on the multi-information display to inform
position from N while stopped or driving
you that the shift position has been changed
at an extremely low speed with the brake
to N.
pedal not depressed
■ Automatic P position selection function
● When attempting to change the shift
In the following situations, the shift position
position from N while stopped or driving
is automatically changed to P.
at an extremely low speed with the accel-
● When pressing the power switch with the
erator pedal depressed
vehicle stopped while the power switch is
● When attempting to change the shift
in ON and the shift position is in a posi-
position from P or N to B *1 or S *2
tion other than P (after the shift position
has changed to P, the power switch will
● When the P position switch is pressed
turn off) *
while driving
When driving at an extremely low speed,
● If the driver’s door is opened and all of the
following conditions are met, while the
the shift position may change to P.
shift position is in a position other than P
*1
: Vehicles without paddle shift switches
4-2. Driving procedures201• The power switch is in ON.■ P position switch• The driver is not wearing the seat belt.● Do not press the P position switch• The brake pedal is not the vehicle is start off the vehicle after the shift positionIf the P position switch is pressed whenis changed to P, operate the shift leverdriving at very low speeds (for example, before stopping the vehicle), the● When the vehicle is stopped after thevehicle may stop suddenly when the shifthybrid system has been stopped in anposition switches to P, which could leademergency while an accident.● When voltage of the 12-volt batterydrops while the shift position is in a posi-● In order to prevent the shift positiontion other than accidentally being changed, do*not touch the P position switch when: When the power switch is pressed whilenot using at extremely slow speeds, such asimmediately before stopping the vehicle,the shift position may automaticallyNOTICEchange to P. Make sure that the vehicle is■ When exiting the vehicle (driver’scompletely stopped before pressing the4seat only)power that the shift position indicator■ If the shift position cannot be shiftedDrivingshows P and that the parking brake indi-from Pcator is illuminated before opening thedoor and exiting the is a possibility that the 12-volt batteryis discharged. Check the 12-volt battery inthis situation. (P.533)Keeping the shift position in N■ Customizationwithout activating the automaticSome functions can be customized.P position selection function(P.556) By performing the following opera-WARNINGtion, the shift position can be held in■ For the shift leverN until the shift position switches to● Do not remove the shift lever knob orP without activating the automatic Puse anything but a genuine Lexus shiftposition selection knob. Also, do not hang anythingon the shift lever. Doing so could pre-1 Operate the shift leve
4-2. Driving procedures
201
• The power switch is in ON.
■ P position switch
• The driver is not wearing the seat belt.
● Do not press the P position switch
• The brake pedal is not depressed.
while the vehicle is moving.
To start off the vehicle after the shift position
If the P position switch is pressed when
is changed to P, operate the shift lever
driving at very low speeds (for example,
again.
directly before stopping the vehicle), the
● When the vehicle is stopped after the
vehicle may stop suddenly when the shift
hybrid system has been stopped in an
position switches to P, which could lead
emergency while driving.
to an accident.
● When voltage of the 12-volt battery
drops while the shift position is in a posi-
● In order to prevent the shift position
tion other than P.
from accidentally being changed, do
*
not touch the P position switch when
: When the power switch is pressed while
not using them.
driving at extremely slow speeds, such as
immediately before stopping the vehicle,
the shift position may automatically
NOTICE
change to P. Make sure that the vehicle is
■ When exiting the vehicle (driver’s
completely stopped before pressing the
4
seat only)
power switch.
Check that the shift position indicator
■ If the shift position cannot be shifted
Driving
shows P and that the parking brake indi-
from P
cator is illuminated before opening the
door and exiting the vehicle.
There is a possibility that the 12-volt battery
is discharged. Check the 12-volt battery in
this situation. (P.533)
Keeping the shift position in N
■ Customization
without activating the automatic
Some functions can be customized.
P position selection function
(P.556)
 By performing the following opera-
WARNING
tion, the shift position can be held in
■ For the shift lever
N until the shift position switches to
● Do not remove the shift lever knob or
P without activating the automatic P
use anything but a genuine Lexus shift
position selection function.
lever knob. Also, do not hang anything
on the shift lever. Doing so could pre-
1 Operate the shift lever and change
vent the shift lever from returning to
the shift position to N when the
position, causing unexpected acci-
hybrid system is operating.
dents to occur when the vehicle is in
motion.
2 Return the shift lever to its regular
● In order to prevent the shift position
position (
).
from accidentally being changed, do
not touch the shift lever when not using
3 Operate the shift lever to N and
them.
hold it there until the buzzer
sounds.
2024-2. Driving procedures4 Press the power switch within 5The “ECO” indicator will come after the buzzer the switch again to cancel EcoThe hybrid system stops with the shift posi-drive in N. *The Eco drive mode will remain on orMake sure to check that the buzzer soundsoff even if the power switch is turnedand “Holding N Push P Switch ” is displayed on the multi-informa-tion display. In order to shift to a position otherthan N, first press the P positionswitch to change the shift position toP. If the automatic P position switchingoperation selection function is per-formed operated with the hybridsystem stopped, the automatic Pposition selection function may not■ Operation of the air conditioning sys-tem in Eco drive perform the operation withEco drive mode controls the heating/cool-ing operations and fan speed of the air con-the hybrid system system to enhance fuel efficiency Make sure to operate the shift lever(P.403). To improve air conditioningperformance, adjust the fan speed or turnwith the hybrid system is Eco drive the hybrid system is not operating,it may not be possible to hold theSelecting shift ranges in the Dshift position in (vehicles with paddle*: To keep this state, do not operate theshift switches)power switch. If the power switch isoperated repeatedly, the power switchTo drive using temporary shift rangewill turn off after the shift position hasselection, operate the “-” paddle shiftautomatically changed to the shift range enables theSelecting the Eco drive modelevel of engine braking force to Eco drive mode to help achievelow fuel consumption during trips thatThe shift range can then be selected byinvolve frequent accelerating andoperating the “-” and “+” paddle the “ECO MODE” switch toselect Eco drive mode.
202
4-2. Driving procedures
4 Press the power switch within 5
The “ECO” indicator will come on.
seconds after the buzzer sounds.
Press the switch again to cancel Eco
The hybrid system stops with the shift posi-
drive mode.
tion in N. *
The Eco drive mode will remain on or
Make sure to check that the buzzer sounds
off even if the power switch is turned
and “Holding N Push P Switch When
off.
Done” is displayed on the multi-informa-
tion display.
 In order to shift to a position other
than N, first press the P position
switch to change the shift position to
P.
 If the automatic P position switching
operation selection function is per-
formed operated with the hybrid
system stopped, the automatic P
position selection function may not
■ Operation of the air conditioning sys-
tem in Eco drive mode
operate.
Always perform the operation with
Eco drive mode controls the heating/cool-
ing operations and fan speed of the air con-
the hybrid system started.
ditioning system to enhance fuel efficiency
 Make sure to operate the shift lever
(P.403). To improve air conditioning
performance, adjust the fan speed or turn
with the hybrid system is operating.
off Eco drive mode.
If the hybrid system is not operating,
it may not be possible to hold the
Selecting shift ranges in the D
shift position in N.
position (vehicles with paddle
*
: To keep this state, do not operate the
shift switches)
power switch. If the power switch is
operated repeatedly, the power switch
To drive using temporary shift range
will turn off after the shift position has
selection, operate the “-” paddle shift
automatically changed to P.
switch.
Changing the shift range enables the
Selecting the Eco drive mode
level of engine braking force to be
selected.
Use Eco drive mode to help achieve
low fuel consumption during trips that
The shift range can then be selected by
involve frequent accelerating and
operating the “-” and “+” paddle shift
braking.
switches.
Press the “ECO MODE” switch to
select Eco drive mode.
4-2. Driving procedures203■ Downshifting restriction warningbuzzerTo help ensure safety and driving perfor-mance, downshifting operation may some-times be restricted. In some circumstances,downshifting may not be possible evenwhen the paddle shift switch is operated. (Abuzzer will sound twice.)Selecting shift ranges in the S1 Upshiftingmode (vehicles with paddle shiftswitches)2 DownshiftingThe selected shift range, from D1 to D6,To enter S mode, shift the shift positionwill be displayed on the multi-informationto S. Shift ranges can be selected the paddle shift switches,To return to normal D position driving,allowing you to drive in the shift rangehold the “+” puddle shift switch for a period4of your choosing. The shift range canof be selected by operating the “-”■ Shift ranges and their functionsDrivingand “+” paddle shift switches. You can choose from 5 levels ofengine braking force. A lower shift range will providegreater engine braking force than ahigher shift range, and the enginerevolutions will also increase.■ When the “-” paddle shift switch is oper-ated in the D positionThe shift range is downshifted to a range1 Upshiftingthat enables engine braking force that is2 Downshiftingsuitable to driving conditions.■ Automatic deactivation of shift rangeThe selected shift range, from S1 to S6, willselection in the D positionbe displayed on the range selection in the D position willThe initial shift range in S mode is automat-be deactivated in the following situations:ically set to S4.● When the vehicle comes to a stop■ Shift ranges and their functions● If the accelerator pedal is depressed for You can choose from 6 levels ofmore than a certain period of time● When the shift position is shifted to aaccelerating force and engine brak-position other than Ding force. A lower shift range will provide
4-2. Driving procedures
203
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the paddle shift switch is operated. (A
buzzer will sound twice.)
Selecting shift ranges in the S
1 Upshifting
mode (vehicles with paddle shift
switches)
2 Downshifting
The selected shift range, from D1 to D6,
To enter S mode, shift the shift position
will be displayed on the multi-information
to S. Shift ranges can be selected by
display.
operating the paddle shift switches,
To return to normal D position driving,
allowing you to drive in the shift range
hold the “+” puddle shift switch for a period
4
of your choosing. The shift range can
of time.
then be selected by operating the “-”
■ Shift ranges and their functions
Driving
and “+” paddle shift switches.
 You can choose from 5 levels of
engine braking force.
 A lower shift range will provide
greater engine braking force than a
higher shift range, and the engine
revolutions will also increase.
■ When the “-” paddle shift switch is oper-
ated in the D position
The shift range is downshifted to a range
1 Upshifting
that enables engine braking force that is
2 Downshifting
suitable to driving conditions.
■ Automatic deactivation of shift range
The selected shift range, from S1 to S6, will
selection in the D position
be displayed on the meter.
Shift range selection in the D position will
The initial shift range in S mode is automat-
be deactivated in the following situations:
ically set to S4.
● When the vehicle comes to a stop
■ Shift ranges and their functions
● If the accelerator pedal is depressed for
 You can choose from 6 levels of
more than a certain period of time
● When the shift position is shifted to a
accelerating force and engine brak-
position other than D
ing force.
 A lower shift range will provide
2044-2. Driving proceduresgreater accelerating force andTurn signal leverengine braking force than a highershift range, and the engine revolu-Operating instructionstions will also turn signal lever can be used to■ S modeshow the following intentions of the● To prevent the engine from over-revving, may automatically occur.● When in S4 or lower, if the paddle shiftswitch is held toward “+” the shift rangewill be set to S6.■ Downshifting restriction warningbuzzerTo help ensure safety and driving perfor-mance, downshifting operation may some-times be restricted. In some circumstances,downshifting may not be possible evenwhen the paddle shift switch is operated. (Abuzzer will sound twice.)1 Right turn2 Lane change to the right (move thelever partway and release it)The right hand signals will flash 3 times.3 Lane change to the left (move thelever partway and release it)The left hand signals will flash 3 times.4 Left turn■ Turn signals can be operated whenThe power switch is in ON.■ If the indicator flashes faster than usualHave the vehicle inspected by any autho-rized Lexus retailer or Lexus authorizedrepairer, or any reliable repairer.
204
4-2. Driving procedures
greater accelerating force and
Turn signal lever
engine braking force than a higher
shift range, and the engine revolu-
Operating instructions
tions will also increase.
The turn signal lever can be used to
■ S mode
show the following intentions of the
● To prevent the engine from over-revving,
driver.
upshifting may automatically occur.
● When in S4 or lower, if the paddle shift
switch is held toward “+” the shift range
will be set to S6.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the paddle shift switch is operated. (A
buzzer will sound twice.)
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The power switch is in ON.
■ If the indicator flashes faster than usual
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
4-2. Driving procedures205■ If the turn signals stop flashing before aParking brakelane change has been performedOperate the lever parking brake can be set orreleased automatically or automatic mode, the parkingbrake can be set or released auto-matically according to shift positionoperation. Also, even in automaticmode, the parking brake can be setor released instructions■ Using the manual modeThe parking brake can be set and4released Parking brake indicator light1 Pull the switch to set the parkingbrakeThe parking brake indicator light will and hold the parking brake switch if anemergency occurs and it is necessary tooperate the parking brake while driving.2 Press the switch to release the
4-2. Driving procedures
205
■ If the turn signals stop flashing before a
Parking brake
lane change has been performed
Operate the lever again.
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to shift position
operation. Also, even in automatic
mode, the parking brake can be set
or released manually.
Operating instructions
■ Using the manual mode
The parking brake can be set and
4
released manually.
Driving
A Parking brake indicator light
1 Pull the switch to set the parking
brake
The parking brake indicator light will turn
on.
Pull and hold the parking brake switch if an
emergency occurs and it is necessary to
operate the parking brake while driving.
2 Press the switch to release the
2064-2. Driving proceduresparking brakeparking brake will be set, and the• Operate the parking brake switch whileparking brake indicator light turndepressing the brake .• Using the parking brake automatic■ Turning the automatic mode offrelease function, the parking brake canbe released by depressing the accelera-While the vehicle is stopped andtor pedal. When using this function,depressing the brake pedal, press andslowly depress the accelerator the parking brake switch until a(P.206)buzzer sounds and a message is shownMake sure that the parking brake indicatoron the multi-information turn off. If the parking brake indicatorlight flash, operate the switch again.■ Parking brake operation(P.497)● When the power switch is not in ON, the■ Turning the automatic mode onparking brake cannot be released usingthe parking brake the vehicle is stopped, pull and● When the power switch is not in ON,hold the parking brake switch until aautomatic mode (automatic brake settingbuzzer sounds and a message is shownand releasing) is not the multi-information display■ Parking brake automatic release func-tionWhen the automatic mode is turnedWhen all of the following conditions areon, the parking brake operates as fol-met, the parking brake can be released the accelerator pedal. When the shift position is shifted● The driver’s door is closedfrom P, the parking brake will be● The driver is wearing the seat beltreleased, and the parking brake● The shift position is in a forward drivingposition or reverse driving positionindicator light will turn off.● The malfunction indicator lamp or brake When the shift position is shifted tosystem warning light is not illuminated.P, the parking brake will be set, andWhen depressing the accelerator pedal,the parking brake indicator light willdepress it the parking brake is not released whenthe accelerator pedal is depressed, releaseOperate the shift positio
206
4-2. Driving procedures
parking brake
parking brake will be set, and the
• Operate the parking brake switch while
parking brake indicator light turn
depressing the brake pedal.
on.
• Using the parking brake automatic
■ Turning the automatic mode off
release function, the parking brake can
be released by depressing the accelera-
While the vehicle is stopped and
tor pedal. When using this function,
depressing the brake pedal, press and
slowly depress the accelerator pedal.
hold the parking brake switch until a
(P.206)
buzzer sounds and a message is shown
Make sure that the parking brake indicator
on the multi-information display.
light turn off. If the parking brake indicator
light flash, operate the switch again.
■ Parking brake operation
(P.497)
● When the power switch is not in ON, the
■ Turning the automatic mode on
parking brake cannot be released using
the parking brake switch.
While the vehicle is stopped, pull and
● When the power switch is not in ON,
hold the parking brake switch until a
automatic mode (automatic brake setting
buzzer sounds and a message is shown
and releasing) is not available.
on the multi-information display
■ Parking brake automatic release func-
tion
When the automatic mode is turned
When all of the following conditions are
on, the parking brake operates as fol-
met, the parking brake can be released by
lows.
depressing the accelerator pedal.
 When the shift position is shifted
● The driver’s door is closed
from P, the parking brake will be
● The driver is wearing the seat belt
released, and the parking brake
● The shift position is in a forward driving
position or reverse driving position
indicator light will turn off.
● The malfunction indicator lamp or brake
 When the shift position is shifted to
system warning light is not illuminated.
P, the parking brake will be set, and
When depressing the accelerator pedal,
the parking brake indicator light will
depress it slowly.
turn on.
If the parking brake is not released when
the accelerator pedal is depressed, release
Operate the shift position and P posi-
the parking brake manually.
tion switch with the vehicle stopped
When the shift position is shifted from P, the
and the brake pedal depressed.
parking brake will be released automati-
cally.
The auto function may not operate if
■ Parking brake automatic lock function
the shift lever is moved extremely
The parking brake will be set automatically
quickly or the brake pedal is not firmly
under the following conditions:
depressed. In this situation, apply the
● The brake pedal is not depressed
parking brake manually. (P.205)
● The driver’s door is open
 When the hybrid system is off, the
● The driver’s seat belt is not fastened
4-2. Driving procedures207● The shift position is in a position otherand releasing) will be turned on automati-than P or Ncally.(The shift position is in P during Advanced■ Parking the vehiclePark * operation.)P.177■ Parking brake engaged warning buzzer● The malfunction indicator lamp andbrake system warning light are not illumi-A buzzer will sound if the vehicle is drivennatedwith the parking brake engaged. “Parking*Brake ON” is displayed on the multi-infor-: If equippedmation display (with the vehicle reaching a■ If “Parking Brake Temporarily Unavail-speed of 5 km/h [3 mph]).able” is displayed on the multi-informa-■ If the brake system warning light comestion displayonIf the parking brake is operated repeatedlyP.490over a short period of time, the system mayrestrict operation to prevent overheating. If■ Usage in winter timethis happens, refrain from operating theP.392parking brake. Normal operation will returnafter about 1 4■ If “Parking Brake Unavailable” is dis-played on the multi-information display■ When parking the vehicleOperate the parking brake switch. If theDo not leave a child in the vehicle does not disappear after operat-The parking brake may be released unin-ing the switch several times, the system maytentionally by a child and there is the dan-be malfunctioning. Have the vehicleger of the vehicle moving that may leadinspected by any authorized Lexus retailerto an accident resulting in death or seri-or Lexus authorized repairer, or any reli-ous repairer.■ Parking brake switch■ Parking brake operation soundDo not set any objects near the parkingWhen the parking brake operates, a motorbrake switch. Objects may interfere withsound (whirring sound) may be heard. Thisthe switch and may lead the parkingdoes not indicate a to unexpectedly operate.■ Parking brake indicator light■ Parking brake automatic lock func-● Depending on the power switch mode,tionthe parking brake indicator light will
4-2. Driving procedures
207
● The shift position is in a position other
and releasing) will be turned on automati-
than P or N
cally.
(The shift position is in P during Advanced
■ Parking the vehicle
Park * operation.)
P.177
■ Parking brake engaged warning buzzer
● The malfunction indicator lamp and
brake system warning light are not illumi-
A buzzer will sound if the vehicle is driven
nated
with the parking brake engaged. “Parking
*
Brake ON” is displayed on the multi-infor-
: If equipped
mation display (with the vehicle reaching a
■ If “Parking Brake Temporarily Unavail-
speed of 5 km/h [3 mph]).
able” is displayed on the multi-informa-
■ If the brake system warning light comes
tion display
on
If the parking brake is operated repeatedly
P.490
over a short period of time, the system may
restrict operation to prevent overheating. If
■ Usage in winter time
this happens, refrain from operating the
P.392
parking brake. Normal operation will return
after about 1 minute.
WARNING
4
■ If “Parking Brake Unavailable” is dis-
played on the multi-information display
■ When parking the vehicle
Operate the parking brake switch. If the
Do not leave a child in the vehicle alone.
Driving
message does not disappear after operat-
The parking brake may be released unin-
ing the switch several times, the system may
tentionally by a child and there is the dan-
be malfunctioning. Have the vehicle
ger of the vehicle moving that may lead
inspected by any authorized Lexus retailer
to an accident resulting in death or seri-
or Lexus authorized repairer, or any reli-
ous injury.
able repairer.
■ Parking brake switch
■ Parking brake operation sound
Do not set any objects near the parking
When the parking brake operates, a motor
brake switch. Objects may interfere with
sound (whirring sound) may be heard. This
the switch and may lead the parking
does not indicate a malfunction.
brake to unexpectedly operate.
■ Parking brake indicator light
■ Parking brake automatic lock func-
● Depending on the power switch mode,
tion
the parking brake indicator light will turn
on and stay on as described below:
Never use the automatic parking brake
ON: Comes on until the parking brake is
engagement function in place of normal
released.
parking brake operation. This function is
Not in ON: Stays on for approximately 15
designed to reduce the risk of a collision
seconds.
due to the driver forgetting to engage
the parking brake. Over-reliance on this
● When the power switch is turned off with
function to park the vehicle safely may
the parking brake set, the parking brake
lead to an accident resulting in death or
indicator light will stay on for about 15
serious injury.
seconds. This does not indicate a mal-
function.
■ When the parking brake switch mal-
functions
Automatic mode (automatic brake setting
2084-2. Driving proceduresBrake HoldNOTICE■ When parking the vehicleThe brake hold system keeps theBefore you leave the vehicle, shift theshift position to P, set the parking brakebrake applied when the shift posi-and make sure that the vehicle does nottion is in D, B *1 , S *2 , N or P with on and the brake pedal has■ When the system malfunctionsbeen depressed to stop the the vehicle in a safe place andThe system releases the brakecheck the warning the accelerator pedal is■ When the vehicle 12-volt battery isdepressed with the shift position indischargedD, B *1 or S *2 to allow smooth startThe parking brake system cannot beactivated. (P.533)off.*1 : Vehicles without paddle shift■ When the parking brake cannot bereleased due to a malfunctionswitchesDriving the vehicle with the parking*2: Vehicles with paddle shift switchesbrake set will lead to brake componentsoverheating, which may affect brakingperformance and increase brake the systemHave the vehicle inspected by any autho-rized Lexus retailer or Lexus authorizedTurns the brake hold system onrepairer, or any reliable repairer immedi-ately if this brake hold standby indicator A(green) comes on. While the system isholding the brake, the brake hold operatedindicator B (yellow) comes on.■ Brake hold system operating conditionsThe brake hold system cannot be turned onin the following conditions:● The driver’s door is not closed.● The driver is not wearing the seat belt.
208
4-2. Driving procedures
Brake Hold
NOTICE
■ When parking the vehicle
The brake hold system keeps the
Before you leave the vehicle, shift the
shift position to P, set the parking brake
brake applied when the shift posi-
and make sure that the vehicle does not
tion is in D, B *1 , S *2 , N or P with the
move.
system on and the brake pedal has
■ When the system malfunctions
been depressed to stop the vehicle.
Stop the vehicle in a safe place and
The system releases the brake
check the warning messages.
when the accelerator pedal is
■ When the vehicle 12-volt battery is
depressed with the shift position in
discharged
D, B *1 or S *2 to allow smooth start
The parking brake system cannot be
activated. (P.533)
off.
*1 : Vehicles without paddle shift
■ When the parking brake cannot be
released due to a malfunction
switches
Driving the vehicle with the parking
*2
: Vehicles with paddle shift switches
brake set will lead to brake components
overheating, which may affect braking
performance and increase brake wear.
Enabling the system
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
Turns the brake hold system on
repairer, or any reliable repairer immedi-
ately if this occurs.
The brake hold standby indicator A
(green) comes on. While the system is
holding the brake, the brake hold operated
indicator B (yellow) comes on.
■ Brake hold system operating conditions
The brake hold system cannot be turned on
in the following conditions:
● The driver’s door is not closed.
● The driver is not wearing the seat belt.
4-2. Driving procedures209● “Parking Brake Unavailable” or “Parking● Operate the parking brake switch withBrake Malfunction Visit Your Dealer” isthe brake pedal on the multi-information dis-Make sure that the parking brake goes off. (P.205)If any of the conditions above are detected■ When an inspection at any authorizedwhen the brake hold system is enabled, theLexus retailer or Lexus authorizedsystem will turn off and the brake holdrepairer, or any reliable repairer is nec-standby indicator light will go off. In addi-essarytion, if any of the conditions are detectedwhile the system is holding the brake, aWhen the brake hold standby indicatorwarning buzzer will sound and a message(green) does not illuminate even when thewill be shown on the multi-information dis-brake hold switch is pressed with the brakeplay. The parking brake will then be sethold system operating conditions met, may be malfunctioning. Have thevehicle inspected at any authorized Lexus■ Brake hold functionretailer or Lexus authorized repairer, or any● If the brake pedal is left released for areliable of about 3 minutes after the sys-■ If “Brake Hold Malfunction Visit Yourtem has started holding the brake, theDealer” is displayed on the multi-infor-parking brake will be set automatically. Inmation displaythis case, a warning buzzer sounds and a4message is shown on the multi-informa-The system may be malfunctioning. Havetion vehicle inspected by any authorizedDrivingLexus retailer or Lexus authorized repairer,● To turn the system off while the system isor any reliable repairer the brake, firmly depress thebrake pedal and press the button again.■ Warning messages and buzzers● The brake hold function may not hold theWarning messages and buzzers are used tovehicle when the vehicle is on a steepindicate a system malfunction or to informincline. In this situation, it may be neces-the driver of th
4-2. Driving procedures
209
● “Parking Brake Unavailable” or “Parking
● Operate the parking brake switch with
Brake Malfunction Visit Your Dealer” is
the brake pedal depressed.
displayed on the multi-information dis-
Make sure that the parking brake indicator
play.
light goes off. (P.205)
If any of the conditions above are detected
■ When an inspection at any authorized
when the brake hold system is enabled, the
Lexus retailer or Lexus authorized
system will turn off and the brake hold
repairer, or any reliable repairer is nec-
standby indicator light will go off. In addi-
essary
tion, if any of the conditions are detected
while the system is holding the brake, a
When the brake hold standby indicator
warning buzzer will sound and a message
(green) does not illuminate even when the
will be shown on the multi-information dis-
brake hold switch is pressed with the brake
play. The parking brake will then be set
hold system operating conditions met, the
automatically.
system may be malfunctioning. Have the
vehicle inspected at any authorized Lexus
■ Brake hold function
retailer or Lexus authorized repairer, or any
● If the brake pedal is left released for a
reliable repairer.
period of about 3 minutes after the sys-
■ If “Brake Hold Malfunction Visit Your
tem has started holding the brake, the
Dealer” is displayed on the multi-infor-
parking brake will be set automatically. In
mation display
this case, a warning buzzer sounds and a
4
message is shown on the multi-informa-
The system may be malfunctioning. Have
tion display.
the vehicle inspected by any authorized
Driving
Lexus retailer or Lexus authorized repairer,
● To turn the system off while the system is
or any reliable repairer immediately.
holding the brake, firmly depress the
brake pedal and press the button again.
■ Warning messages and buzzers
● The brake hold function may not hold the
Warning messages and buzzers are used to
vehicle when the vehicle is on a steep
indicate a system malfunction or to inform
incline. In this situation, it may be neces-
the driver of the need for caution. If a warn-
sary for the driver to apply the brakes. A
ing message is shown on the multi-informa-
warning buzzer will sound and the multi-
tion display, read the message and follow
information display will inform the driver
the instructions.
of this situation. If a warning message is
■ If the brake hold operated indicator
shown on the multi-information display,
flashes
read the message and follow the instruc-
tions.
P.497
● When do not wish for the parking brake
to operate automatically, press and hold
WARNING
the brake hold switch until the standby
indicator (green) turns off, and then turn
■ When the vehicle is on a steep incline
the power switch off.
Take care when using the brake hold sys-
■ When the parking brake is set automati-
tem on a steep incline, exercise caution.
cally while the system is holding the
The brake hold function may not hold
brakes
brakes in such situations. Also, the sys-
tem may not activate depending on the
Perform any of the following operations to
angle of the slope.
release the parking brake.
● Depress the accelerator pedal. (The
parking brake will not be released auto-
matically if the seat belt is not fastened.)
2104-2. Driving proceduresWARNING■ When stopped on a slippery roadThe system cannot stop the vehicle whenthe gripping ability of the tires has beenexceeded. Do not use the system whenstopped on a slippery ■ When parking the vehicleThe brake hold system is not designedfor use when parking the vehicle for along period of time. Turning the powerswitch off while the system is holding thebrake may release the brake, whichwould cause the vehicle to move. Whenoperating the power switch, depress thebrake pedal, shift the shift position to Pand set the parking brake.
210
4-2. Driving procedures
WARNING
■ When stopped on a slippery road
The system cannot stop the vehicle when
the gripping ability of the tires has been
exceeded. Do not use the system when
stopped on a slippery road.
NOTICE
■ When parking the vehicle
The brake hold system is not designed
for use when parking the vehicle for a
long period of time. Turning the power
switch off while the system is holding the
brake may release the brake, which
would cause the vehicle to move. When
operating the power switch, depress the
brake pedal, shift the shift position to P
and set the parking brake.
4-3. Operating the lights and the lights and wipersHeadlight switch■ AUTO mode can be used whenThe power switch is in headlights can be operated■ Daytime running light functionmanually or make your vehicle more visible to otherdrivers during daytime driving, the daytimerunning lights turn on automatically when-Turning on the headlightsever the hybrid system is started and theparking brake is released with the headlightOperating theswitch turns onthe lights as follows:switch in theposition. (Illuminatebrighter than the front position lights.) Day-time running lights are not designed for useat night.■ Headlight control sensorThe sensor may not function properly if anobject is placed on the sensor, or anything4that blocks the sensor is affixed to the so interferes with the sensor detect-Drivinging the level of ambient light and may causethe automatic headlight system to malfunc-tion.1The front position, tail, license■ Automatic light off systemplate and instrument panel lights● When the light switch is inor:turn headlights and front fog lights (if2The headlights and all theequipped) turn off automatically if thepower switch is turned to ACC or listed above turn on.● When the light switch is inposition:3The headlights, daytime run-The headlights and all the lights turn offning lights (P.211) and all theautomatically if the power switch islights listed above turn on and offturned to ACC or turn the lights on again, turn the powerswitch to ON, or turn the light switch to
4-3. Operating the lights and wipers
211
4-3.Operating the lights and wipers
Headlight switch
■ AUTO mode can be used when
The power switch is in ON.
The headlights can be operated
■ Daytime running light function
manually or automatically.
To make your vehicle more visible to other
drivers during daytime driving, the daytime
running lights turn on automatically when-
Turning on the headlights
ever the hybrid system is started and the
parking brake is released with the headlight
Operating the
switch turns on
the lights as follows:
switch in the
position. (Illuminate
brighter than the front position lights.) Day-
time running lights are not designed for use
at night.
■ Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
4
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detect-
Driving
ing the level of ambient light and may cause
the automatic headlight system to malfunc-
tion.
1
The front position, tail, license
■ Automatic light off system
plate and instrument panel lights
● When the light switch is in
or
:
turn on.
The headlights and front fog lights (if
2
The headlights and all the
equipped) turn off automatically if the
power switch is turned to ACC or OFF.
lights listed above turn on.
● When the light switch is in
position:
3
The headlights, daytime run-
The headlights and all the lights turn off
ning lights (P.211) and all the
automatically if the power switch is
lights listed above turn on and off
turned to ACC or OFF.
automatically.
To turn the lights on again, turn the power
switch to ON, or turn the light switch to
2124-3. Operating the lights and wipers■ Customizationposition once and then back toorSettings (e.g. light sensor sensitivity) can bechanged..(Customizable features: P.556)■ Light reminder buzzerA buzzer sounds when the power switch isNOTICEturned off or turned to ACC and the■ To prevent 12-volt battery dischargedriver’s door is opened while the lights areturned not leave the lights on longer thannecessary when the hybrid system is not■ Automatic headlight leveling system ()The level of the headlights is automaticallyadjusted according to the number of pas-Turning on the high beam head-sengers and the loading condition of thelightsvehicle to ensure that the headlights do notinterfere with other road users.■ 12-volt battery-saving functionIn order to prevent the 12-volt battery of thevehicle from discharging, if the light switchis in theorposition when thepower switch is turned off, the 12-volt bat-tery saving function will operate and auto-matically turn off all the lights afterapproximately 10 minutes.1 With the headlights on, push theWhen the power switch is turned to ON,lever away from you to turn on thethe 12-volt battery-saving function will any of the following are performed,Pull the lever toward you to the centerthe 12-volt battery-saving function is can-position to turn the high beams once and then reactivated. All thelights will turn off automatically 10 minutes2 Pull the lever toward you andafter the 12-volt battery- saving function hasrelease it to flash the high beamsbeen reactivated:once.● When the headlight switch is operatedYou can flash the high beams with the● When a door is opened or closedheadlights on or off.■ Welcome light illumination controlThe front position lights automatically turnExtended Headlight Lightingon at night when the doors are unlockedsystemusing the entry function or wireless remotecontrol if the light switch is in theposi-This system allows the headlights andtion.f
212
4-3. Operating the lights and wipers
■ Customization
position once and then back to
or
Settings (e.g. light sensor sensitivity) can be
changed.
.
(Customizable features: P.556)
■ Light reminder buzzer
A buzzer sounds when the power switch is
NOTICE
turned off or turned to ACC and the
■ To prevent 12-volt battery discharge
driver’s door is opened while the lights are
turned on.
Do not leave the lights on longer than
necessary when the hybrid system is not
■ Automatic headlight leveling system (if
operating.
equipped)
The level of the headlights is automatically
adjusted according to the number of pas-
Turning on the high beam head-
sengers and the loading condition of the
lights
vehicle to ensure that the headlights do not
interfere with other road users.
■ 12-volt battery-saving function
In order to prevent the 12-volt battery of the
vehicle from discharging, if the light switch
is in the
or
position when the
power switch is turned off, the 12-volt bat-
tery saving function will operate and auto-
matically turn off all the lights after
approximately 10 minutes.
1 With the headlights on, push the
When the power switch is turned to ON,
lever away from you to turn on the
the 12-volt battery-saving function will be
disabled.
high beams.
When any of the following are performed,
Pull the lever toward you to the center
the 12-volt battery-saving function is can-
position to turn the high beams off.
celed once and then reactivated. All the
lights will turn off automatically 10 minutes
2 Pull the lever toward you and
after the 12-volt battery- saving function has
release it to flash the high beams
been reactivated:
once.
● When the headlight switch is operated
You can flash the high beams with the
● When a door is opened or closed
headlights on or off.
■ Welcome light illumination control
The front position lights automatically turn
Extended Headlight Lighting
on at night when the doors are unlocked
system
using the entry function or wireless remote
control if the light switch is in the
posi-
This system allows the headlights and
tion.
front position lights to be turned on for
30 seconds when the power switch is
4-3. Operating the lights and headlight leveling dial (ifPull the lever toward you and release itequipped)with the light switch is inafter turn-The level of the headlights can being the power switch according to the number ofPull the lever toward you and release itpassengers and the loading conditionagain to turn off the the vehicle.41 Raises the level of the headlightsCornering lights (if equipped)2 Lowers the level of the headlightsDrivingWhen any of the following conditions is■ Guide to dial settingsmet, while the headlights (low beam) 2WD modelsare on, the cornering lights will addi-tionally turn on and light up the direc-Occupancy and luggage loadDialtion of movement for the vehicle. This isconditionspositionto ensure excellent visibility whenOccupantsLuggage loadeither driving at intersections or park-DriverNone0ing at and The steering wheel is operatedNone0.5front passenger The turn signal lever is operatedAll seats occu- The shift lever is in R (both left andNone1.5piedright side cornering lights)All seats occu-Full luggage2.5piedloading■ Cornering light controlFull luggage● The lights illuminate when the vehicleDriver3.5speed is approximately 30 km/h (19loadingmph) or less. However, the lights turn offwhen the vehicle speed increases toapproximately 35 km/h (22 mph) ormore.● After the lights remain illuminated for 30minutes, they automatically turn off.
4-3. Operating the lights and wipers
213
OFF.
Manual headlight leveling dial (if
Pull the lever toward you and release it
equipped)
with the light switch is in
after turn-
The level of the headlights can be
ing the power switch off.
adjusted according to the number of
Pull the lever toward you and release it
passengers and the loading condition
again to turn off the lights.
of the vehicle.
4
1 Raises the level of the headlights
Cornering lights (if equipped)
2 Lowers the level of the headlights
Driving
When any of the following conditions is
■ Guide to dial settings
met, while the headlights (low beam)
 2WD models
are on, the cornering lights will addi-
tionally turn on and light up the direc-
Occupancy and luggage load
Dial
tion of movement for the vehicle. This is
conditions
position
to ensure excellent visibility when
Occupants
Luggage load
either driving at intersections or park-
Driver
None
0
ing at night.
Driver and
 The steering wheel is operated
None
0.5
front passenger
 The turn signal lever is operated
All seats occu-
 The shift lever is in R (both left and
None
1.5
pied
right side cornering lights)
All seats occu-
Full luggage
2.5
pied
loading
■ Cornering light control
Full luggage
● The lights illuminate when the vehicle
Driver
3.5
speed is approximately 30 km/h (19
loading
mph) or less. However, the lights turn off
when the vehicle speed increases to
approximately 35 km/h (22 mph) or
more.
● After the lights remain illuminated for 30
minutes, they automatically turn off.
2144-3. Operating the lights and wipers AWD modelsAHS (Adaptive High-beamSystem) *Occupancy and luggage loadDialconditionsposition*: If equippedOccupantsLuggage loadThe Adaptive High-beam SystemDriverNone0uses a front camera located on theDriver andupper portion of the windshield toNone0.5front passengerdetect the brightness of the lights ofAll seats occu-vehicles ahead, streetlights, etc.,None1.5piedand automatically controls the lightdistribution of the seats occu-Full luggage2piedloadingWARNINGFull luggageDriver3■ For safe useloadingDo not overly rely on the Adaptive High-beam System. Always drive safely, takingcare to observe your surroundings andturning the high beams on or off manu-ally if necessary.■ To prevent incorrect operation of theAdaptive High-beam SystemWhen it is necessary to disable the sys-tem: P.233System controls According to the vehicle speed, thebrightness and illuminated area ofthe high beams are adjusted. When driving around a curve, thesystem uses the high beams tobrightly illuminate the direction oftravel of the vehicle. The high beams are illuminated sothat the area around a vehicle aheadis shaded. (Shaded high beam)The shaded high beam helps ensure for-ward visibility while reducing the dazzlingeffect on the drivers of vehicles ahead.
214
4-3. Operating the lights and wipers
 AWD models
AHS (Adaptive High-beam
System) *
Occupancy and luggage load
Dial
conditions
position
*
: If equipped
Occupants
Luggage load
The Adaptive High-beam System
Driver
None
0
uses a front camera located on the
Driver and
upper portion of the windshield to
None
0.5
front passenger
detect the brightness of the lights of
All seats occu-
vehicles ahead, streetlights, etc.,
None
1.5
pied
and automatically controls the light
distribution of the headlights.
All seats occu-
Full luggage
2
pied
loading
WARNING
Full luggage
Driver
3
■ For safe use
loading
Do not overly rely on the Adaptive High-
beam System. Always drive safely, taking
care to observe your surroundings and
turning the high beams on or off manu-
ally if necessary.
■ To prevent incorrect operation of the
Adaptive High-beam System
When it is necessary to disable the sys-
tem: P.233
System controls
 According to the vehicle speed, the
brightness and illuminated area of
the high beams are adjusted.
 When driving around a curve, the
system uses the high beams to
brightly illuminate the direction of
travel of the vehicle.
 The high beams are illuminated so
that the area around a vehicle ahead
is shaded. (Shaded high beam)
The shaded high beam helps ensure for-
ward visibility while reducing the dazzling
effect on the drivers of vehicles ahead.
4-3. Operating the lights and wipers215nate.A Area illuminated by the high beamsB Area illuminated by the low beams■ System operating conditions● When all of the following conditions are According to the distance to a pre-met, the high beams will illuminate andceding vehicle, the illuminated areathe system will operate:of the low beams is adjusted.• The vehicle speed is approximately 15km/h (9 mph) or more * .• The area ahead of the vehicle is dark.4Using the Adaptive High-beam*: When driving around a curve at a vehicleSystemspeed of approximately 30 km/h orDrivingmore, the direction of travel of the vehicle1 Press the Adaptive High-beamwill be brightly switch.● When all of the following conditions aremet, the headlights will change to theshaded high beams according to theposition of vehicles ahead:• The vehicle speed is approximately 15km/h (9 mph) or more.• The area ahead of the vehicle is dark.• There is a vehicle ahead with lights on.• There are few streetlights or other lightson the road ahead.● If any of the following conditions are met,the system will change to the low beams:2 Turn the headlight switch to the• The vehicle speed is approximately 12km/h (7.5 mph) or .• The area ahead of the vehicle is not dark.• There are many vehicles the headlight switch lever is in the• There are many streetlights or otherlow beam position, the AHS will belights on the road and the AHS indicator will illumi-■ Front camera detection● In the following situations, the high beamsmay not be automatically changed to theshaded high beams:• When a vehicle cuts in front of your vehi-cle
4-3. Operating the lights and wipers
215
nate.
A Area illuminated by the high beams
B Area illuminated by the low beams
■ System operating conditions
● When all of the following conditions are
 According to the distance to a pre-
met, the high beams will illuminate and
ceding vehicle, the illuminated area
the system will operate:
of the low beams is adjusted.
• The vehicle speed is approximately 15
km/h (9 mph) or more * .
• The area ahead of the vehicle is dark.
4
Using the Adaptive High-beam
*
: When driving around a curve at a vehicle
System
speed of approximately 30 km/h or
Driving
more, the direction of travel of the vehicle
1 Press the Adaptive High-beam
will be brightly illuminated.
System switch.
● When all of the following conditions are
met, the headlights will change to the
shaded high beams according to the
position of vehicles ahead:
• The vehicle speed is approximately 15
km/h (9 mph) or more.
• The area ahead of the vehicle is dark.
• There is a vehicle ahead with lights on.
• There are few streetlights or other lights
on the road ahead.
● If any of the following conditions are met,
the system will change to the low beams:
2 Turn the headlight switch to the
• The vehicle speed is approximately 12
km/h (7.5 mph) or lower.
or
position.
• The area ahead of the vehicle is not dark.
• There are many vehicles ahead.
When the headlight switch lever is in the
• There are many streetlights or other
low beam position, the AHS will be
lights on the road ahead.
enabled and the AHS indicator will illumi-
■ Front camera detection
● In the following situations, the high beams
may not be automatically changed to the
shaded high beams:
• When a vehicle cuts in front of your vehi-
cle
2164-3. Operating the lights and wipers• When another vehicle crosses in front of● In the following situations, the system maythe vehiclenot be able to correctly detect the bright-• When vehicles ahead are repeatedlyness of the surroundings. This may causedetected and then hidden due tothe low beams to remain on or the highrepeated curves, road dividers or road-beams to flash or dazzle pedestrians orside treesvehicles ahead. In such a case, it is neces-• When a vehicle ahead approaches fromsary to manually change between thea far lanehigh beams and low beams.• When a vehicle ahead is far away• When there are lights similar to head-• When a vehicle ahead has no lightslights or tail lights in the surrounding area• When the lights of a vehicle ahead are• When headlights or tail lights of vehiclesdimahead are turned off, dirty, changing• When a vehicle ahead is reflecting strongcolor, or not aimed properlylight, such as the headlights of your vehi-• When the headlights are repeatedlyclechanging between the high beams and• Situations in which the sensors may notlow properly: P.238• When use of the high beams is inappro-priate or when the high beams may be● The high beams may change to theflashing or dazzling pedestrians or othershaded high beams if a vehicle ahead using fog lights without its headlights• When the vehicle is used in an area inturned on is vehicles travel on the opposite side● House lights, street lights, traffic signals,of the road of the country for which theand illuminated billboards or signs andvehicle was designed, for example usingother reflective objects may cause thea vehicle designed for right-hand traffic inhigh beams to change to the shaded higha left-hand traffic area, or vice versabeams, cause the high beams not to• When it is necessary to disable the sys-change to the shaded high beams, ortem: P.233change the area that is not illuminated.• Situations in which the sensors may notoperate properly: 
216
4-3. Operating the lights and wipers
• When another vehicle crosses in front of
● In the following situations, the system may
the vehicle
not be able to correctly detect the bright-
• When vehicles ahead are repeatedly
ness of the surroundings. This may cause
detected and then hidden due to
the low beams to remain on or the high
repeated curves, road dividers or road-
beams to flash or dazzle pedestrians or
side trees
vehicles ahead. In such a case, it is neces-
• When a vehicle ahead approaches from
sary to manually change between the
a far lane
high beams and low beams.
• When a vehicle ahead is far away
• When there are lights similar to head-
• When a vehicle ahead has no lights
lights or tail lights in the surrounding area
• When the lights of a vehicle ahead are
• When headlights or tail lights of vehicles
dim
ahead are turned off, dirty, changing
• When a vehicle ahead is reflecting strong
color, or not aimed properly
light, such as the headlights of your vehi-
• When the headlights are repeatedly
cle
changing between the high beams and
• Situations in which the sensors may not
low beams.
operate properly: P.238
• When use of the high beams is inappro-
priate or when the high beams may be
● The high beams may change to the
flashing or dazzling pedestrians or other
shaded high beams if a vehicle ahead that
drivers.
is using fog lights without its headlights
• When the vehicle is used in an area in
turned on is detected.
which vehicles travel on the opposite side
● House lights, street lights, traffic signals,
of the road of the country for which the
and illuminated billboards or signs and
vehicle was designed, for example using
other reflective objects may cause the
a vehicle designed for right-hand traffic in
high beams to change to the shaded high
a left-hand traffic area, or vice versa
beams, cause the high beams not to
• When it is necessary to disable the sys-
change to the shaded high beams, or
tem: P.233
change the area that is not illuminated.
• Situations in which the sensors may not
operate properly: P.238
● The following may change the speed at
which the shaded areas change or the
■ Customization
timing at which the headlights change to
Some functions can be customized.
the low beams:
(P.556)
• The brightness of lights of vehicles ahead
• The movement and direction of vehicles
ahead
Turning the high beams on/off
• The distance between the vehicle and a
manually
vehicle ahead
• When a vehicle ahead only has lights illu-
minated on one side
■ Changing to the high beams
• When a vehicle ahead is a two-wheeled
Push the lever forward.
vehicle
• The condition of the road (gradient,
The AHS indicator will turn off and the high
curve, condition of the road surface, etc.)
beam indicator will turn on.
• The number of passengers and amount of
luggage
Pull the lever to its original position to
● The light distribution control of the head-
enable the Adaptive High-beam System
lights may not match the driver’s expec-
again.
tations
● Bicycles and other small vehicles may not
be detected.
4-3. Operating the lights and wipers217System will operate.■ Changing to the low beamsPress the Adaptive High-beam AHS indicator will turn the switch to enable the AdaptiveHigh-beam System again.4DrivingTemporarily switching to the lowbeamsIt is recommended to switch to the lowbeams when use of the high beams isinappropriate or when the high beamsmay cause problems or distress toother drivers or pedestrians the lever rearward and then returnit to its original high beams will illuminate while thelever is pulled, however, after the lever isreturned to its original position, the lowbeams will remain on for a certain amountof time. After this, the Adaptive High-beam
4-3. Operating the lights and wipers
217
System will operate.
■ Changing to the low beams
Press the Adaptive High-beam System
switch.
The AHS indicator will turn off.
Press the switch to enable the Adaptive
High-beam System again.
4
Driving
Temporarily switching to the low
beams
It is recommended to switch to the low
beams when use of the high beams is
inappropriate or when the high beams
may cause problems or distress to
other drivers or pedestrians nearby.
Pull the lever rearward and then return
it to its original position.
The high beams will illuminate while the
lever is pulled, however, after the lever is
returned to its original position, the low
beams will remain on for a certain amount
of time. After this, the Adaptive High-beam
2184-3. Operating the lights and wipers2 Turn the headlight switch to theAHB (Automatic HighBeam) the headlight switch lever is in thelow beam position, the AHB system will beThe Automatic High Beam uses aenabled and the AHB indicator will illumi-front camera located on the of the windshield to detectthe brightness of the lights of vehi-cles ahead, streetlights, etc., andautomatically changes the headlights between the high beams andlow ■ For safe useDo not overly rely on the Automatic■ Automatic operating conditions of theHigh Beam. Always drive safely, takinghigh beamscare to observe your surroundings andturning the high beams on or off manu-● When all of the following conditions areally if , the high beams will illuminate auto-matically:■ To prevent incorrect operation of the• The vehicle speed is approximately 30Automatic High Beam systemkm/h (19 mph) or more.• The area ahead of the vehicle is it is necessary to disable the sys-tem: P.233• There are no vehicles ahead with lightson.• There are few streetlights or other lightsUsing the Automatic High Beamon the road ahead.● If any of the following conditions are met,systemthe headlights will change to the lowbeams:1 Press the Automatic High Beam• Vehicle speed drops below 25 km/h (16 mph).• The area ahead of the vehicle is not dark.• There is a vehicle ahead with lights on.• There are many streetlights or otherlights on the road ahead.■ Front camera detection● In the following situations, the high beamsmay not be automatically changed to thelow beams:• When a vehicle cuts in front of your vehi-cle• When another vehicle crosses in front ofthe vehicle• When vehicles ahead are repeatedly
218
4-3. Operating the lights and wipers
2 Turn the headlight switch to the
AHB (Automatic High
Beam)
or
position.
When the headlight switch lever is in the
low beam position, the AHB system will be
The Automatic High Beam uses a
enabled and the AHB indicator will illumi-
front camera located on the upper
nate.
portion of the windshield to detect
the brightness of the lights of vehi-
cles ahead, streetlights, etc., and
automatically changes the head
lights between the high beams and
low beams.
WARNING
■ For safe use
Do not overly rely on the Automatic
■ Automatic operating conditions of the
High Beam. Always drive safely, taking
high beams
care to observe your surroundings and
turning the high beams on or off manu-
● When all of the following conditions are
ally if necessary.
met, the high beams will illuminate auto-
matically:
■ To prevent incorrect operation of the
• The vehicle speed is approximately 30
Automatic High Beam system
km/h (19 mph) or more.
• The area ahead of the vehicle is dark.
When it is necessary to disable the sys-
tem: P.233
• There are no vehicles ahead with lights
on.
• There are few streetlights or other lights
Using the Automatic High Beam
on the road ahead.
● If any of the following conditions are met,
system
the headlights will change to the low
beams:
1 Press the Automatic High Beam
• Vehicle speed drops below approxi-
switch.
mately 25 km/h (16 mph).
• The area ahead of the vehicle is not dark.
• There is a vehicle ahead with lights on.
• There are many streetlights or other
lights on the road ahead.
■ Front camera detection
● In the following situations, the high beams
may not be automatically changed to the
low beams:
• When a vehicle cuts in front of your vehi-
cle
• When another vehicle crosses in front of
the vehicle
• When vehicles ahead are repeatedly
4-3. Operating the lights and wipers219detected and then hidden due tohigh beams and low curves, road dividers or road-• When there are lights similar to head-side treeslights or tail lights in the surrounding area• When a vehicle ahead approaches from• When headlights or tail lights of vehiclesa far laneahead are turned off, dirty, changing• When a vehicle ahead is far awaycolor, or not aimed properly• When a vehicle ahead has no lights• When the headlights are repeatedly• When the lights of a vehicle ahead arechanging between the high beams anddimlow beams.• When a vehicle ahead is reflecting strong• When use of the high beams is inappro-light, such as own headlightspriate or when the high beams may be• Situations in which the sensors may notflashing or dazzling pedestrians or otheroperate properly: P.238drivers.• When the vehicle is used in an area in● The headlights may change to the lowwhich vehicles travel on the opposite sidebeams if a vehicle ahead that is using fogof the road of the country for which thelights without its headlights turned on isvehicle was designed, for example usingdetected.a vehicle designed for right-hand traffic in● House lights, street lights, traffic signals,a left-hand traffic area, or vice versaand illuminated billboards or signs may• When it is necessary to disable the sys-cause the high beams to change to thetem: P.2334low beams, or the low beams to remain• Situations in which the sensors may properly: P.238● The following may change the timing atDrivingwhich the headlights change to the lowTurning the high beams on/offbeams:manually• The brightness of lights of vehicles ahead• The movement and direction of vehiclesahead■ Changing to the high beams• The distance between the vehicle and aPush the lever ahead• When a vehicle ahead only has lights illu-The AHB indicator will turn off and theminated on one sidehigh beam indicator will turn on.• When a vehicle ahead is a two-wheeledvehicl
4-3. Operating the lights and wipers
219
detected and then hidden due to
high beams and low beams.
repeated curves, road dividers or road-
• When there are lights similar to head-
side trees
lights or tail lights in the surrounding area
• When a vehicle ahead approaches from
• When headlights or tail lights of vehicles
a far lane
ahead are turned off, dirty, changing
• When a vehicle ahead is far away
color, or not aimed properly
• When a vehicle ahead has no lights
• When the headlights are repeatedly
• When the lights of a vehicle ahead are
changing between the high beams and
dim
low beams.
• When a vehicle ahead is reflecting strong
• When use of the high beams is inappro-
light, such as own headlights
priate or when the high beams may be
• Situations in which the sensors may not
flashing or dazzling pedestrians or other
operate properly: P.238
drivers.
• When the vehicle is used in an area in
● The headlights may change to the low
which vehicles travel on the opposite side
beams if a vehicle ahead that is using fog
of the road of the country for which the
lights without its headlights turned on is
vehicle was designed, for example using
detected.
a vehicle designed for right-hand traffic in
● House lights, street lights, traffic signals,
a left-hand traffic area, or vice versa
and illuminated billboards or signs may
• When it is necessary to disable the sys-
cause the high beams to change to the
tem: P.233
4
low beams, or the low beams to remain
• Situations in which the sensors may not
on.
operate properly: P.238
● The following may change the timing at
Driving
which the headlights change to the low
Turning the high beams on/off
beams:
manually
• The brightness of lights of vehicles ahead
• The movement and direction of vehicles
ahead
■ Changing to the high beams
• The distance between the vehicle and a
Push the lever forward.
vehicle ahead
• When a vehicle ahead only has lights illu-
The AHB indicator will turn off and the
minated on one side
high beam indicator will turn on.
• When a vehicle ahead is a two-wheeled
vehicle
Pull the lever to its original position to
• The condition of the road (gradient,
enable the Automatic High Beam system
curve, condition of the road surface, etc.)
again.
• The number of passengers and amount of
luggage
● The headlights may change between the
high beams and low beams unexpect-
edly.
● Bicycles and other small vehicles may not
be detected.
● In the following situations, the system may
not be able to correctly detect the bright-
ness of the surroundings. This may cause
the low beams to remain on or the high
beams to flash or dazzle pedestrians or
■ Changing to the low beams
vehicles ahead. In such a case, it is neces-
sary to manually change between the
Press the Automatic High Beam
2204-3. Operating the lights and light switchThe AHB indicator will turn the switch to enable the AutomaticWhen in difficult driving conditions,High Beam system as in rain and fog, turn on thefront fog lights to secure front visi-bility and turn on the rear fog lightsto notify following vehicles the exis-tence of your on the fog lights Rear fog light switchTemporarily switching to the lowbeamsIt is recommended to switch to the lowbeams when use of the high beams isinappropriate or when the high beamsmay cause problems or distress toother drivers or pedestrians the lever rearward and then returnit to its original high beams will illuminate while thelever is pulled, however, after the lever isreturned to its original position, the lowbeams will remain on for a certain amountof time. After this, the Automatic HighBeam system will operate.1Turns the rear fog lights off2Turns the rear fog lights onReleasing the switch ring returns it the switch ring again turns therear fog lights off.
220
4-3. Operating the lights and wipers
switch.
Fog light switch
The AHB indicator will turn off.
Press the switch to enable the Automatic
When in difficult driving conditions,
High Beam system again.
such as in rain and fog, turn on the
front fog lights to secure front visi-
bility and turn on the rear fog lights
to notify following vehicles the exis-
tence of your vehicle.
Turning on the fog lights
 Rear fog light switch
Temporarily switching to the low
beams
It is recommended to switch to the low
beams when use of the high beams is
inappropriate or when the high beams
may cause problems or distress to
other drivers or pedestrians nearby.
Pull the lever rearward and then return
it to its original position.
The high beams will illuminate while the
lever is pulled, however, after the lever is
returned to its original position, the low
beams will remain on for a certain amount
of time. After this, the Automatic High
Beam system will operate.
1
Turns the rear fog lights off
2
Turns the rear fog lights on
Releasing the switch ring returns it to
.
Operating the switch ring again turns the
rear fog lights off.
4-3. Operating the lights and wipers221 Front and rear fog light switchNOTICE■ To prevent 12-volt battery dischargeDo not leave the lights on longer thannecessary when the hybrid system is off.4Driving1Turns the front and rear foglights off2Turns the front fog lights on3Turns both front and rear foglights onReleasing the switch ring returns it the switch ring again turns onlythe rear fog lights off.■ Fog lights can be used when Vehicles with rear fog lights onlyThe headlights are turned on. Vehicles with front and rear fog lightsFront fog lights: The front position lights areturned fog lights: The front fog lights areturned on.
4-3. Operating the lights and wipers
221
 Front and rear fog light switch
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the lights on longer than
necessary when the hybrid system is off.
4
Driving
1
Turns the front and rear fog
lights off
2
Turns the front fog lights on
3
Turns both front and rear fog
lights on
Releasing the switch ring returns it to
.
Operating the switch ring again turns only
the rear fog lights off.
■ Fog lights can be used when
 Vehicles with rear fog lights only
The headlights are turned on.
 Vehicles with front and rear fog lights
Front fog lights: The front position lights are
turned on.
Rear fog lights: The front fog lights are
turned on.
2224-3. Operating the lights and wipers3Low speed operationWindshield wipers andwasher4High speed operation5Temporary operationOperating the lever can changeWiper intervals can be adjusted whenwiper operation to automatic/man-intermittent operation is or squirt washer ■ When the windshield is dryDo not use the wipers, as they may dam-age the the wiper leverOperating thelever operates6 Increases the intermittent wind-the wipers or washer as follows:shield wiper frequency Intermittent windshield wipers with7 Decreases the intermittent wind-interval adjustershield wiper frequency8Washer/wiper dual opera-tionPulling the lever operates the wipers wipers will automatically operate acouple of times after the washer squirts. Rain-sensing windshield wipers1OffWhen AUTO is selected, the wiperswill operate automatically when the2Intermittent operationsensor detects falling rain. The system
222
4-3. Operating the lights and wipers
3
Low speed operation
Windshield wipers and
washer
4
High speed operation
5
Temporary operation
Operating the lever can change
Wiper intervals can be adjusted when
wiper operation to automatic/man-
intermittent operation is selected.
ual or squirt washer fluid.
NOTICE
■ When the windshield is dry
Do not use the wipers, as they may dam-
age the windshield.
Operating the wiper lever
Operating the
lever operates
6 Increases the intermittent wind-
the wipers or washer as follows:
shield wiper frequency
 Intermittent windshield wipers with
7 Decreases the intermittent wind-
interval adjuster
shield wiper frequency
8
Washer/wiper dual opera-
tion
Pulling the lever operates the wipers and
washer.
The wipers will automatically operate a
couple of times after the washer squirts.
 Rain-sensing windshield wipers
1
Off
When AUTO is selected, the wipers
will operate automatically when the
2
Intermittent operation
sensor detects falling rain. The system
4-3. Operating the lights and wipers223automatically adjusts wiper timing in6 Increases the sensitivityaccordance with rain volume and vehi-7 Decreases the sensitivitycle speed.8Washer/wiper dual opera-tionPulling the lever operates the wipers andwasher.4The wipers will automatically operate acouple of times after the washer squirts.(After operating several times, the wipersDrivingoperate once more time after a short delayto prevent dripping. However, the drippingprevention does not operate while the1Offvehicle is moving.)2Rain-sensing operation■ The windshield wipers and washer can3Low speed operationbe operated when4High speed operationThe power switch is in ON.■ Using the voice control system (if5Temporary operationequipped)When AUTO is selected, the sensorThe following operations can be performedsensitivity can be adjusted by turningusing the voice control system:the switch ring.● Operating the windshield wipers onlyonce● Operating the windshield cleaningwasher (it can be performed only whenthe vehicle is stopped)For details regarding the voice control sys-tem, refer to “MULTIMEDIA OWNER’SMANUAL”.■ Effects of vehicle speed on wiper opera-tion (vehicles with rain-sensing wind-shield wipers)Vehicle speed affects the Intermittent wiper
4-3. Operating the lights and wipers
223
automatically adjusts wiper timing in
6 Increases the sensitivity
accordance with rain volume and vehi-
7 Decreases the sensitivity
cle speed.
8
Washer/wiper dual opera-
tion
Pulling the lever operates the wipers and
washer.
4
The wipers will automatically operate a
couple of times after the washer squirts.
(After operating several times, the wipers
Driving
operate once more time after a short delay
to prevent dripping. However, the dripping
prevention does not operate while the
1
Off
vehicle is moving.)
2
Rain-sensing operation
■ The windshield wipers and washer can
3
Low speed operation
be operated when
4
High speed operation
The power switch is in ON.
■ Using the voice control system (if
5
Temporary operation
equipped)
When AUTO is selected, the sensor
The following operations can be performed
sensitivity can be adjusted by turning
using the voice control system:
the switch ring.
● Operating the windshield wipers only
once
● Operating the windshield cleaning
washer (it can be performed only when
the vehicle is stopped)
For details regarding the voice control sys-
tem, refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ Effects of vehicle speed on wiper opera-
tion (vehicles with rain-sensing wind-
shield wipers)
Vehicle speed affects the Intermittent wiper
2244-3. Operating the lights and wipersinterval.■ Caution regarding the use of washerfluid■ Raindrop sensor (vehicles with rain-sensing windshield wipers)When it is cold, do not use the washerfluid until the windshield becomes warm.● The raindrop sensor judges the amountThe fluid may freeze on the windshieldof cause low visibility. This may lead toAn optical sensor is adopted. It may notan accident, resulting in death or seriousoperate properly when sunlight from or setting of the sun intermittentlystrikes the windshield, or if bugs, etc. arepresent on the ■ When the washer fluid tank is emptyDo not operate the switch continually asthe washer fluid pump may overheat.■ When a nozzle becomes blockedIn this case, contact any authorizedLexus retailer or Lexus authorizedrepairer, or any reliable repairer.● If the wiper switch is turned to theDo not try to clear it with a pin or other“AUTO” position while the power switchobject. The nozzle will be in ON, the wipers will operate once toshow that AUTO mode is activated.■ To prevent 12-volt battery discharge● If the temperature of the raindrop sensorDo not leave the wipers on longer thanis 90°C (194°F) or higher, or -15°Cnecessary when the hybrid system is off.(5°F) or lower, automatic operation maynot occur. In this case, operate the wipersin any mode other than AUTO the windshield wiper■ If no windshield washer fluid spraysrest position/Lifting the wind-Check that the washer nozzles are notshield wipersblocked, if there is washer fluid in thewasher fluid the windshield wipers are notbeing used, they retract to below theWARNINGhood. To enable the windshield wipers■ Caution regarding the use of wind-to be lifted when parking in cold condi-shield wipers in AUTO mode (vehi-tions or when replacing a windshieldcles with rain-sensing windshieldwipers)wiper insert, change the rest position ofThe windshield wipers may operatethe windshield wipers to
224
4-3. Operating the lights and wipers
interval.
■ Caution regarding the use of washer
fluid
■ Raindrop sensor (vehicles with rain-
sensing windshield wipers)
When it is cold, do not use the washer
fluid until the windshield becomes warm.
● The raindrop sensor judges the amount
The fluid may freeze on the windshield
of raindrops.
and cause low visibility. This may lead to
An optical sensor is adopted. It may not
an accident, resulting in death or serious
operate properly when sunlight from the
injury.
rising or setting of the sun intermittently
strikes the windshield, or if bugs, etc. are
present on the windshield.
NOTICE
■ When the washer fluid tank is empty
Do not operate the switch continually as
the washer fluid pump may overheat.
■ When a nozzle becomes blocked
In this case, contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● If the wiper switch is turned to the
Do not try to clear it with a pin or other
“AUTO” position while the power switch
object. The nozzle will be damaged.
is in ON, the wipers will operate once to
show that AUTO mode is activated.
■ To prevent 12-volt battery discharge
● If the temperature of the raindrop sensor
Do not leave the wipers on longer than
is 90°C (194°F) or higher, or -15°C
necessary when the hybrid system is off.
(5°F) or lower, automatic operation may
not occur. In this case, operate the wipers
in any mode other than AUTO mode.
Changing the windshield wiper
■ If no windshield washer fluid sprays
rest position/Lifting the wind-
Check that the washer nozzles are not
shield wipers
blocked, if there is washer fluid in the
washer fluid tank.
When the windshield wipers are not
being used, they retract to below the
WARNING
hood. To enable the windshield wipers
■ Caution regarding the use of wind-
to be lifted when parking in cold condi-
shield wipers in AUTO mode (vehi-
tions or when replacing a windshield
cles with rain-sensing windshield
wipers)
wiper insert, change the rest position of
The windshield wipers may operate
the windshield wipers to the service
unexpectedly if the sensor is touched or
position using the wiper lever.
the windshield is subject to vibration in
AUTO mode. Take care that your fin-
■ Raising the wipers to the service
gers, etc. do not become caught in the
position
windshield wipers.
Within approximately 45 seconds of
turning the power switch off, move the
4-3. Operating the lights and wipers225windshield, turn the power switch to ONwiper lever to theposition andand then move the wiper lever to an operat-hold it for approximately 2 seconds oring position. When the wiper switch isturned off, the windshield wipers will stop retracted position. Even if the wipersdeviate while the power switch is OFF, theThe wipers will move to the service posi-wipers will return to the normal ■ When lifting the windshield wipers● When lifting the wiper arms away fromthe windshield pull the driver sidewiper arm upward first, and repeat forthe passenger’s side. When returningthe wipers to their original position, doso from the passenger’s side first. Oth-erwise, the wiper arms may be dam-aged.● Do not lift a windshield wiper by the4wiper blade. Otherwise, the wiperblade may be ■ Lifting the windshield wipersWhile holding the hook portion A of● Do not operate the wiper lever whenthe wiper arm, lift the windshield wiperthe windshield wipers are lifted. Oth-from the , the windshield wipers maycontact the hood, possibly resulting indamage to the windshield wipersand/or hood.■ Lowering the windshield wipers to theretracted positionWith the windshield wipers placed on the
4-3. Operating the lights and wipers
225
windshield, turn the power switch to ON
wiper lever to the
position and
and then move the wiper lever to an operat-
hold it for approximately 2 seconds or
ing position. When the wiper switch is
turned off, the windshield wipers will stop at
more.
the retracted position. Even if the wipers
deviate while the power switch is OFF, the
The wipers will move to the service posi-
wipers will return to the normal position.
tion.
NOTICE
■ When lifting the windshield wipers
● When lifting the wiper arms away from
the windshield pull the driver side
wiper arm upward first, and repeat for
the passenger’s side. When returning
the wipers to their original position, do
so from the passenger’s side first. Oth-
erwise, the wiper arms may be dam-
aged.
● Do not lift a windshield wiper by the
4
wiper blade. Otherwise, the wiper
blade may be deformed.
Driving
■ Lifting the windshield wipers
While holding the hook portion A of
● Do not operate the wiper lever when
the wiper arm, lift the windshield wiper
the windshield wipers are lifted. Oth-
from the windshield.
erwise, the windshield wipers may
contact the hood, possibly resulting in
damage to the windshield wipers
and/or hood.
■ Lowering the windshield wipers to the
retracted position
With the windshield wipers placed on the
2264-3. Operating the lights and wipersRear window wiper andwasherThe rear window wiper and washercan be used by operating the ■ When the rear window is dryDo not use the wiper, as it may damage4Washer/wiper dual opera-the rear the lever operates the wiper andOperating the wiper wiper will automatically operate a cou-Operating theswitch operatesple of times after the washer rear wiper as follows:The washer will automatically operate andclean the rear camera. ** : Refer to “MULTIMEDIA OWNER’SMANUAL”.■ The rear window wiper and washer canbe operated whenThe power switch is in ON.■ Using the voice control system (ifequipped)The following operations can be performedusing the voice control system:● Operating the rear window wiper onlyonce● Operating the rear window cleaningwasher (it can be performed only whenthe vehicle is stopped)For details regarding the voice control sys-tem, refer to “MULTIMEDIA OWNER’SMANUAL”.1Off■ If no windshield washer fluid sprays2Intermittent operationCheck that the washer nozzles are not3Normal operationblocked, if there is washer fluid in thewasher fluid tank.
226
4-3. Operating the lights and wipers
Rear window wiper and
washer
The rear window wiper and washer
can be used by operating the lever.
NOTICE
■ When the rear window is dry
Do not use the wiper, as it may damage
4
Washer/wiper dual opera-
the rear window.
tion
Pushing the lever operates the wiper and
Operating the wiper lever
washer.
The wiper will automatically operate a cou-
Operating the
switch operates
ple of times after the washer squirts.
the rear wiper as follows:
The washer will automatically operate and
clean the rear camera. *
* : Refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ The rear window wiper and washer can
be operated when
The power switch is in ON.
■ Using the voice control system (if
equipped)
The following operations can be performed
using the voice control system:
● Operating the rear window wiper only
once
● Operating the rear window cleaning
washer (it can be performed only when
the vehicle is stopped)
For details regarding the voice control sys-
tem, refer to “MULTIMEDIA OWNER’S
MANUAL”.
1
Off
■ If no windshield washer fluid sprays
2
Intermittent operation
Check that the washer nozzles are not
3
Normal operation
blocked, if there is washer fluid in the
washer fluid tank.
4-3. Operating the lights and wipers227■ Reverse-linked rear window wiperfunctionWhen the shift lever is shifted to R when thefront wipers are operating, the rear windowwiper will operate once.■ Back door opening linked rear windowwiper stop functionWhen the rear window wiper is operating, ifthe back door is opened while the vehicle isstopped, operation of the rear windowwiper will be stopped to prevent anyonenear the vehicle from being sprayed bywater from the wiper. When the back dooris closed, wiper operation will resume.■ CustomizationSetting of the reverse-linked function canbe changed. (Customizable fea-tures:P.556)4NOTICEDriving■ When the washer fluid tank is emptyDo not operate the switch continually asthe washer fluid pump may overheat.■ When a nozzle becomes blockedIn this case, contact any authorizedLexus retailer or Lexus authorizedrepairer, or any reliable not try to clear it with a pin or otherobject. The nozzle will be damaged.■ To prevent 12-volt battery dischargeDo not leave the wiper on longer thannecessary when the hybrid system is off.
4-3. Operating the lights and wipers
227
■ Reverse-linked rear window wiper
function
When the shift lever is shifted to R when the
front wipers are operating, the rear window
wiper will operate once.
■ Back door opening linked rear window
wiper stop function
When the rear window wiper is operating, if
the back door is opened while the vehicle is
stopped, operation of the rear window
wiper will be stopped to prevent anyone
near the vehicle from being sprayed by
water from the wiper. When the back door
is closed, wiper operation will resume.
■ Customization
Setting of the reverse-linked function can
be changed. (Customizable fea-
tures:P.556)
4
NOTICE
Driving
■ When the washer fluid tank is empty
Do not operate the switch continually as
the washer fluid pump may overheat.
■ When a nozzle becomes blocked
In this case, contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Do not try to clear it with a pin or other
object. The nozzle will be damaged.
■ To prevent 12-volt battery discharge
Do not leave the wiper on longer than
necessary when the hybrid system is off.
2284-4. the fuel tank cap● Do not inhale vaporized contains substances that areharmful if refueling the vehicle● Do not smoke while refueling the vehi-cle. Turn the power switch off andDoing so may cause the fuel to igniteensure that all the doors and win-and cause a are closed.● Do not return to the vehicle or touch Confirm the type of person or object that is may cause static electricity to■ Fuel typesbuild up, resulting in a possible ignitionP.555hazard.■ Fuel tank opening for unleaded gasoline■ When refuelingTo help prevent incorrect fueling, your vehi-Observe the following precautions tocle has a fuel tank opening that only accom-prevent fuel overflowing from the fuelmodates the special nozzle on unleadedtank:fuel pumps.● Securely insert the fuel nozzle into thefuel filler ● Stop filling the tank after the fuel noz-■ When refueling the vehiclezle automatically clicks the following precautions while● Do not top off the fuel the vehicle. Failure to do somay result in death or serious injury.● After exiting the vehicle and beforeNOTICEopening the fuel door, touch an■ Refuelingunpainted metal surface to dischargeany static electricity. It is important toDo not spill fuel during static electricity before refu-Doing so may damage the vehicle, sucheling because sparks resulting fromas causing the emission control system tostatic electricity can cause fuel vaporsoperate abnormally or damaging fuelto ignite while components or the vehicle’spainted surface.● Always hold the grips on the fuel tankcap and turn it slowly to remove it.A whooshing sound may be heardwhen the fuel tank cap is until the sound cannot be heardbefore fully removing the cap. In hotweather, pressurized fuel may sprayout the filler neck and cause injury.● Do not allow anyone that has not dis-charged static electric
228
4-4. Refueling
4-4.Refueling
Opening the fuel tank cap
● Do not inhale vaporized fuel.
Fuel contains substances that are
harmful if inhaled.
Before refueling the vehicle
● Do not smoke while refueling the vehi-
cle.
 Turn the power switch off and
Doing so may cause the fuel to ignite
ensure that all the doors and win-
and cause a fire.
dows are closed.
● Do not return to the vehicle or touch
 Confirm the type of fuel.
any person or object that is statically
charged.
This may cause static electricity to
■ Fuel types
build up, resulting in a possible ignition
P.555
hazard.
■ Fuel tank opening for unleaded gasoline
■ When refueling
To help prevent incorrect fueling, your vehi-
Observe the following precautions to
cle has a fuel tank opening that only accom-
prevent fuel overflowing from the fuel
modates the special nozzle on unleaded
tank:
fuel pumps.
● Securely insert the fuel nozzle into the
fuel filler neck.
WARNING
● Stop filling the tank after the fuel noz-
■ When refueling the vehicle
zle automatically clicks off.
Observe the following precautions while
● Do not top off the fuel tank.
refueling the vehicle. Failure to do so
may result in death or serious injury.
● After exiting the vehicle and before
NOTICE
opening the fuel door, touch an
■ Refueling
unpainted metal surface to discharge
any static electricity. It is important to
Do not spill fuel during refueling.
discharge static electricity before refu-
Doing so may damage the vehicle, such
eling because sparks resulting from
as causing the emission control system to
static electricity can cause fuel vapors
operate abnormally or damaging fuel
to ignite while refueling.
system components or the vehicle’s
painted surface.
● Always hold the grips on the fuel tank
cap and turn it slowly to remove it.
A whooshing sound may be heard
when the fuel tank cap is loosened.
Wait until the sound cannot be heard
before fully removing the cap. In hot
weather, pressurized fuel may spray
out the filler neck and cause injury.
● Do not allow anyone that has not dis-
charged static electricity from their
body to come close to an open fuel
tank.
4-4. Refueling229Opening the fuel tank cap1 Press the opener ■ When replacing the fuel tank capDo not use anything but a genuine Lexus2 Turn the fuel tank cap slowly andfuel tank cap designed for your so may cause a fire or other inci-remove it, then put it into the holderdent which may result in death or seriouson the fuel filler .4Driving■ If the fuel filler door cannot be openedConsult any authorized Lexus retailer orLexus authorized repairer, or any the fuel tank capAfter refueling, turn the fuel tank capuntil you hear a click. Once the cap isreleased, it will turn slightly in theopposite direction.
4-4. Refueling
229
Opening the fuel tank cap
1 Press the opener switch.
WARNING
■ When replacing the fuel tank cap
Do not use anything but a genuine Lexus
2 Turn the fuel tank cap slowly and
fuel tank cap designed for your vehicle.
Doing so may cause a fire or other inci-
remove it, then put it into the holder
dent which may result in death or serious
on the fuel filler door.
injury.
4
Driving
■ If the fuel filler door cannot be opened
Consult any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
repairer.
Closing the fuel tank cap
After refueling, turn the fuel tank cap
until you hear a click. Once the cap is
released, it will turn slightly in the
opposite direction.
2304-5. Using the driving support the driving support systemsLexus Safety System + software update ** : If equippedIt is necessary to enter a connected services contract, provided by Lexus, touse these functions. For details, contact any authorized Lexus retailer orLexus authorized repairer, or any reliable ■ For safe useWhen the Lexus Safety System + software is updated, the operating methods of functionsmay change. Using this system without knowing the correct operating methods may leadto an accident resulting in death or serious injury.● Make sure to read the Digital Owner’s Manual which corresponds to the software ver-sion of the system, available at the Owner’s Manual website, before using this of the Lexus Safety System + Owner’s ManualThis Owner’s Manual contains information for Ver. 2. For the latest informationabout the controls, use, warnings/precautions, etc. of each function of Lexus SafetySystem +, refer to the Digital Owner’s Manual at the Owner’s Manual the software of this system has been updated after initial purchase of the vehicle,before using this system, be sure to read the Owner’s Manual which correspondsto the software version of the system.■ Precautions for use● Be aware that some functions may temporarily be disabled if a legal or safety related issueoccurs.● If a connected services contract has not been entered or has expired, software updateswill not be able to be performed your vehicle’s Lexus Safety System + versionIf the software of this system has been updated after initial purchase of the vehicle,to access the appropriate Owner’s Manual, it is necessary to check the softwareversion of the system and then visit the Owner’s Manual website.■ Checking the current software version on the Center DisplayThe current software version can be checked from the driving assist functionupdate notification.
230
4-5. Using the driving support systems
4-5.Using the driving support systems
Lexus Safety System + software update *
* : If equipped
It is necessary to enter a connected services contract, provided by Lexus, to
use these functions. For details, contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer.
WARNING
■ For safe use
When the Lexus Safety System + software is updated, the operating methods of functions
may change. Using this system without knowing the correct operating methods may lead
to an accident resulting in death or serious injury.
● Make sure to read the Digital Owner’s Manual which corresponds to the software ver-
sion of the system, available at the Owner’s Manual website, before using this system.
Content of the Lexus Safety System + Owner’s Manual
This Owner’s Manual contains information for Ver. 2. For the latest information
about the controls, use, warnings/precautions, etc. of each function of Lexus Safety
System +, refer to the Digital Owner’s Manual at the Owner’s Manual website.
If the software of this system has been updated after initial purchase of the vehicle,
before using this system, be sure to read the Owner’s Manual which corresponds
to the software version of the system.
■ Precautions for use
● Be aware that some functions may temporarily be disabled if a legal or safety related issue
occurs.
● If a connected services contract has not been entered or has expired, software updates
will not be able to be performed wirelessly.
Checking your vehicle’s Lexus Safety System + version
If the software of this system has been updated after initial purchase of the vehicle,
to access the appropriate Owner’s Manual, it is necessary to check the software
version of the system and then visit the Owner’s Manual website.
■ Checking the current software version on the Center Display
The current software version can be checked from the driving assist function
update notification.
4-5. Using the driving support systems231■ Selecting your vehicle’s Lexus Safety System + version1 Access the following URL using a computer or smartphone:LanguageURLQR Code Select the file which includes the previously checked system the softwareIf a software update is available, a notification will be displayed on the Center Dis-play. Follow the instructions displayed on the the software is updated, the way functions are used may change and func-tions may be details about changes or additions, check the Owner’s Manual website.■ Software update precautions● After a software update has been performed, it will not be possible to revert to a previousversion.● Depending on the communication environment and the content of an update, a softwareupdate may take several hours. Although an update will be suspended when the power
4-5. Using the driving support systems
231
■ Selecting your vehicle’s Lexus Safety System + version
1 Access the following URL using a computer or smartphone:
Language
URL
QR Code
English
lbx.2506.
French
lbx.2506.
Germany
lbx.2506.
4
Driving
Spanish
lbx.2506.
Italy
lbx.2506.
2 Select the file which includes the previously checked system version.
Updating the software
If a software update is available, a notification will be displayed on the Center Dis-
play. Follow the instructions displayed on the screen.
When the software is updated, the way functions are used may change and func-
tions may be added.
For details about changes or additions, check the Owner’s Manual website.
■ Software update precautions
● After a software update has been performed, it will not be possible to revert to a previous
version.
● Depending on the communication environment and the content of an update, a software
update may take several hours. Although an update will be suspended when the power
2324-5. Using the driving support systemsswitch is turned off, it will resume when the power switch is changed back to ON.● Lexus Safety System + can still be used while a software update is being performed.● In the following situations, a software update may be performed automatically:• When a possible system issue or other safety related issue is corrected *• When a legal issue is corrected *• When small corrections which do not affect system operation or performance are made*: All available updates may be installed and the software updated to the most current ver-sion.■ Checking the driving assist function update notificationThe following items can be checked or performed.● Software version, update details, precautions, use methods, etc.● A link to display the software update history● Software update
232
4-5. Using the driving support systems
switch is turned off, it will resume when the power switch is changed back to ON.
● Lexus Safety System + can still be used while a software update is being performed.
● In the following situations, a software update may be performed automatically:
• When a possible system issue or other safety related issue is corrected *
• When a legal issue is corrected *
• When small corrections which do not affect system operation or performance are made
*
: All available updates may be installed and the software updated to the most current ver-
sion.
■ Checking the driving assist function update notification
The following items can be checked or performed.
● Software version, update details, precautions, use methods, etc.
● A link to display the software update history
● Software update
4-5. Using the driving support systems233Lexus Safety System +● Depending on external noise, the vol-ume of the audio system, etc. it may bedifficult to hear the warning Lexus Safety System + consistsAlso, depending on the road condi-tions, it may be difficult to recognizeof the driving assist systems andthe operation of the to a safe and comfort-■ When it is necessary to disable theable driving experience:systemIn the following situations, make sure toWARNINGdisable the system.■ Lexus Safety System +Failure to do so may lead to the systemnot operating properly, possibly leadingThe Lexus Safety System + operatesto an accident resulting in death or seri-under the assumption that the driver willous safely, and is designed to helpreduce the impact to the occupants in a● When the vehicle is tilted due to beingcollision and assist the driver under nor-overloaded or having a flat tiremal driving there is a limit to the degree of recog-● When driving at extremely high4nition accuracy and control performancespeedsthat this system can provide, do not● When towing another vehicleoverly rely on this system. The driver isDrivingsolely responsible for paying attention to● When the vehicle is being transportedthe vehicle’s surroundings and drivingby a truck, ship, train, .● When the vehicle is raised on a lift and■ For safe usethe tires are allowed to rotate freely● Do not overly rely on this system. Thedriver is solely responsible for paying● When inspecting the vehicle using aattention to the vehicle’s surroundingsdrum tester such as a chassisand driving safely. This system may notdynamometer or speedometer tester,operate in all situations and providedor when using an on vehicle wheel bal-assistance is limited. Over-reliance onancerthis system to drive the vehicle safely● When the vehicle is driven in a sportymay lead to an accident resulting inmanner or off-roaddeath or serious injury.● When using an automatic
4-5. Using the driving support systems
233
Lexus Safety System +
● Depending on external noise, the vol-
ume of the audio system, etc. it may be
difficult to hear the warning buzzer.
The Lexus Safety System + consists
Also, depending on the road condi-
tions, it may be difficult to recognize
of the driving assist systems and
the operation of the system.
contributes to a safe and comfort-
■ When it is necessary to disable the
able driving experience:
system
In the following situations, make sure to
WARNING
disable the system.
■ Lexus Safety System +
Failure to do so may lead to the system
not operating properly, possibly leading
The Lexus Safety System + operates
to an accident resulting in death or seri-
under the assumption that the driver will
ous injury.
drive safely, and is designed to help
reduce the impact to the occupants in a
● When the vehicle is tilted due to being
collision and assist the driver under nor-
overloaded or having a flat tire
mal driving conditions.
As there is a limit to the degree of recog-
● When driving at extremely high
4
nition accuracy and control performance
speeds
that this system can provide, do not
● When towing another vehicle
overly rely on this system. The driver is
Driving
solely responsible for paying attention to
● When the vehicle is being transported
the vehicle’s surroundings and driving
by a truck, ship, train, etc.
safely.
● When the vehicle is raised on a lift and
■ For safe use
the tires are allowed to rotate freely
● Do not overly rely on this system. The
driver is solely responsible for paying
● When inspecting the vehicle using a
attention to the vehicle’s surroundings
drum tester such as a chassis
and driving safely. This system may not
dynamometer or speedometer tester,
operate in all situations and provided
or when using an on vehicle wheel bal-
assistance is limited. Over-reliance on
ancer
this system to drive the vehicle safely
● When the vehicle is driven in a sporty
may lead to an accident resulting in
manner or off-road
death or serious injury.
● When using an automatic car wash
● Do not attempt to test the operation of
the system, as it may not operate prop-
● When a sensor is misaligned or
erly, possibly leading to an accident.
deformed due to a strong impact
● If attention is necessary while perform-
being applied to the sensor or the area
around the sensor
ing driving operations or a system mal-
function occurs, a warning message or
● When accessories which obstruct a
warning buzzer will be operated. If a
sensor or light are temporarily
warning message is displayed on the
installed to the vehicle
display, follow the instructions dis-
played.
2344-5. Using the driving support systems■ RSA (Road Sign Assist)WARNINGP.274● When a compact spare tire or tirechains are installed to the vehicle or an■ Dynamic radar cruise controlemergency tire puncture repair kit hasP.278been used● When the tires are excessively worn or■ Cruise controlthe inflation pressure of the tires is lowP.291● When tires other than the manufac-■ Speed Limiterturer specified size are installedP.298● When the vehicle cannot be drivenstably, due to a collision, malfunction,■ Emergency Driving Stop Systemetc.P.296■ Driver monitorDriving assist systemsP.241■ AHS (Adaptive High-beam Sys-*: If equippedtem) *P.214Sensors used by Lexus Safety■ AHB (Automatic High Beam)System +P.218Various sensors are used to obtain the■ PCS (Pre-Collision System)necessary information for systemP.242operation.■ Sensors which detect the sur-■ LTA (Lane Tracing Assist)rounding conditionsP.253 Front■ LDA (Lane Departure Alert)P.261■ LCA (Lane Change Assist) *P.258■ FCTA (Front Crossing TrafficAlert) *P.272■ PDA (Proactive Driving Assist)A Front radar sensorP.266B Front camera
234
4-5. Using the driving support systems
■ RSA (Road Sign Assist)
WARNING
P.274
● When a compact spare tire or tire
chains are installed to the vehicle or an
■ Dynamic radar cruise control
emergency tire puncture repair kit has
P.278
been used
● When the tires are excessively worn or
■ Cruise control
the inflation pressure of the tires is low
P.291
● When tires other than the manufac-
■ Speed Limiter
turer specified size are installed
P.298
● When the vehicle cannot be driven
stably, due to a collision, malfunction,
■ Emergency Driving Stop System
etc.
P.296
■ Driver monitor
Driving assist systems
P.241
■ AHS (Adaptive High-beam Sys-
*
: If equipped
tem) *
P.214
Sensors used by Lexus Safety
■ AHB (Automatic High Beam)
System +
P.218
Various sensors are used to obtain the
■ PCS (Pre-Collision System)
necessary information for system
P.242
operation.
■ Sensors which detect the sur-
■ LTA (Lane Tracing Assist)
rounding conditions
P.253
 Front
■ LDA (Lane Departure Alert)
P.261
■ LCA (Lane Change Assist) *
P.258
■ FCTA (Front Crossing Traffic
Alert) *
P.272
■ PDA (Proactive Driving Assist)
A Front radar sensor
P.266
B Front camera
4-5. Using the driving support systems235C Front side radar sensors *● Keep the radar sensors and radar sen-sor covers clean at all times.*: If equippedClean the front of a radar sensor or the Rearfront or back of a radar sensor cover if itis dirty or covered with water droplets,snow, cleaning the radar sensor andradar sensor cover, use a soft cloth toremove dirt so as to not damage them.A Rear side radar sensors■ Sensors which detect the drivercondition4A Radar sensorDrivingB Radar sensor cover● Vehicles with front side radar sensors:Keep the surrounding area of the frontside radar sensors on the front bumperclean at all times.A Driver monitor cameraWARNING■ To prevent malfunction of the radarsensors● Do not attach accessories, stickersObserve the following precautions.(including transparent stickers), alumi-num tape, etc. to a radar sensor orFailure to do so may lead to a radar sen-radar sensor cover and their sur-sor not operating properly, possiblyrounding to an accident resulting in deathor serious injury.
4-5. Using the driving support systems
235
C Front side radar sensors *
● Keep the radar sensors and radar sen-
sor covers clean at all times.
*
: If equipped
Clean the front of a radar sensor or the
 Rear
front or back of a radar sensor cover if it
is dirty or covered with water droplets,
snow, etc.
When cleaning the radar sensor and
radar sensor cover, use a soft cloth to
remove dirt so as to not damage them.
A Rear side radar sensors
■ Sensors which detect the driver
condition
4
A Radar sensor
Driving
B Radar sensor cover
● Vehicles with front side radar sensors:
Keep the surrounding area of the front
side radar sensors on the front bumper
clean at all times.
A Driver monitor camera
WARNING
■ To prevent malfunction of the radar
sensors
● Do not attach accessories, stickers
Observe the following precautions.
(including transparent stickers), alumi-
num tape, etc. to a radar sensor or
Failure to do so may lead to a radar sen-
radar sensor cover and their sur-
sor not operating properly, possibly
rounding area.
leading to an accident resulting in death
or serious injury.
2364-5. Using the driving support systems• If the windshield is dirty or coveredWARNINGwith an oily film, water droplets, snow,● Do not subject a radar sensor or itsetc., clean the area to impact.• Even if a glass coating agent is appliedIf a radar sensor, the front grille, or frontto the windshield, it will still be neces-bumper has been subjected to a impact,sary to use the windshield wipers tohave the vehicle inspected by any autho-remove water droplets, etc. from therized Lexus retailer or Lexus authorizedarea of the windshield in front of thefront , or any reliable repairer.• If the inner side of the windshield● Do not disassemble the radar the front camera is installed is● Do not modify or paint the radar sen-dirty, contact any authorized Lexussors or radar sensor cover, or replaceretailer or Lexus authorized repairer,them with anything other than Lexusor any reliable parts.● Do not attach stickers (including trans-● In the following situations, recalibra-parent stickers) or other items to thetion of the radar sensors will be neces-area of the windshield in front of thesary. For details, contact anyfront camera (shaded area in the illus-authorized Lexus retailer or Lexustration).authorized repairer, or any reliablerepairer.• When a radar sensor is removed andinstalled, or replaced• When the front bumper or the frontgrille has been replaced■ Radar sensor cover with a heater (ifequipped)A Approximately 4 cm (1.6 in.)When the system determines that snowmay pile up over the radar sensor cover,B Approximately 4 cm (1.6 in.)the heater will operate automatically. Ifthe area around the radar sensor cover is● If the part of the windshield in front ofto be touched, such as during cleaning,the front camera is fogged up or cov-make sure that the radar sensor cover isered with condensation or ice, use thecool enough to prevent defogger to remove thefog, condensation, or ice.■ To prevent m
236
4-5. Using the driving support systems
• If the windshield is dirty or covered
WARNING
with an oily film, water droplets, snow,
● Do not subject a radar sensor or its
etc., clean the windshield.
surrounding area to impact.
• Even if a glass coating agent is applied
If a radar sensor, the front grille, or front
to the windshield, it will still be neces-
bumper has been subjected to a impact,
sary to use the windshield wipers to
have the vehicle inspected by any autho-
remove water droplets, etc. from the
rized Lexus retailer or Lexus authorized
area of the windshield in front of the
front camera.
repairer, or any reliable repairer.
• If the inner side of the windshield
● Do not disassemble the radar sensors.
where the front camera is installed is
● Do not modify or paint the radar sen-
dirty, contact any authorized Lexus
sors or radar sensor cover, or replace
retailer or Lexus authorized repairer,
them with anything other than Lexus
or any reliable repairer.
genuine parts.
● Do not attach stickers (including trans-
● In the following situations, recalibra-
parent stickers) or other items to the
tion of the radar sensors will be neces-
area of the windshield in front of the
sary. For details, contact any
front camera (shaded area in the illus-
authorized Lexus retailer or Lexus
tration).
authorized repairer, or any reliable
repairer.
• When a radar sensor is removed and
installed, or replaced
• When the front bumper or the front
grille has been replaced
■ Radar sensor cover with a heater (if
equipped)
A Approximately 4 cm (1.6 in.)
When the system determines that snow
may pile up over the radar sensor cover,
B Approximately 4 cm (1.6 in.)
the heater will operate automatically. If
the area around the radar sensor cover is
● If the part of the windshield in front of
to be touched, such as during cleaning,
the front camera is fogged up or cov-
make sure that the radar sensor cover is
ered with condensation or ice, use the
cool enough to prevent burns.
windshield defogger to remove the
fog, condensation, or ice.
■ To prevent malfunction of the front
camera
● If water droplets cannot be properly
removed from the area of the wind-
Observe the following precautions.
shield in front of the front camera by
Failure to do so may lead to the front
the windshield wipers, replace the
camera not operating properly, possibly
wiper insert or wiper blade.
leading to an accident resulting in death
or serious injury.
● Do not attach window tint to the wind-
shield.
● Always keep the windshield clean.
4-5. Using the driving support systems237● If a surfboard or other long object is toWARNINGbe mounted on the roof, make sure● Replace the windshield if it is damagedthat it will not obstruct the front cam-or the windshield has been replaced,● Do not modify or change the head-recalibration of the front camera will belights and other . For details, contact any■ Front camera installation area on theauthorized Lexus retailer or Lexuswindshieldauthorized repairer, or any reliableIf the system determines that the may be fogged up, it will automati-● Do not allow liquids to contact thecally operate the heater to defog the partfront the windshield around the front cam-era. When cleaning, etc., be careful not● Do not allow bright lights to shine intoto touch the area around the front cam-the front until the windshield has cooled suffi-ciently, as touching it may cause burns.● Do not damage the lens of the frontcamera or allow it to become dirty.■ Precautions for the driver monitorcameraWhen cleaning the inside of the wind-4shield, do not allow glass cleaner to con-Observe the following the lens of the front camera. Do notFailure to do so may lead to malfunctionDrivingtouch the lens of the front the driver monitor camera and the sys-tems not operating properly, possiblyIf the lens of the front camera is dirty orleading to an accident resulting in deathdamaged, contact any authorized Lexusor serious or Lexus authorized repairer, or● Do not subject the driver monitorany reliable or its surrounding area tostrong impact.● Do not subject the front camera to astrong subjected to a strong impact, the drivermonitor camera may move out of align-● Do not change the position or orienta-ment and the driver may no longer betion of the front camera or remove correctly. In this case, have the● Do not disassemble the front in
4-5. Using the driving support systems
237
● If a surfboard or other long object is to
WARNING
be mounted on the roof, make sure
● Replace the windshield if it is damaged
that it will not obstruct the front cam-
or cracked.
era.
If the windshield has been replaced,
● Do not modify or change the head-
recalibration of the front camera will be
lights and other lights.
necessary. For details, contact any
■ Front camera installation area on the
authorized Lexus retailer or Lexus
windshield
authorized repairer, or any reliable
If the system determines that the wind-
repairer.
shield may be fogged up, it will automati-
● Do not allow liquids to contact the
cally operate the heater to defog the part
front camera.
of the windshield around the front cam-
era. When cleaning, etc., be careful not
● Do not allow bright lights to shine into
to touch the area around the front cam-
the front camera.
era until the windshield has cooled suffi-
ciently, as touching it may cause burns.
● Do not damage the lens of the front
camera or allow it to become dirty.
■ Precautions for the driver monitor
camera
When cleaning the inside of the wind-
4
shield, do not allow glass cleaner to con-
Observe the following precautions.
tact the lens of the front camera. Do not
Failure to do so may lead to malfunction
Driving
touch the lens of the front camera.
of the driver monitor camera and the sys-
tems not operating properly, possibly
If the lens of the front camera is dirty or
leading to an accident resulting in death
damaged, contact any authorized Lexus
or serious injury.
retailer or Lexus authorized repairer, or
● Do not subject the driver monitor
any reliable repairer.
camera or its surrounding area to
strong impact.
● Do not subject the front camera to a
strong impact.
If subjected to a strong impact, the driver
monitor camera may move out of align-
● Do not change the position or orienta-
ment and the driver may no longer be
tion of the front camera or remove it.
detected correctly. In this case, have the
● Do not disassemble the front camera.
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
● Do not modify any parts around the
front camera, such as the inside rear
repairer, or any reliable repairer.
view mirror or ceiling.
● Do not disassemble or modify the
● Do not attach accessories which may
driver monitor camera.
obstruct the front camera to the hood,
● Do not attach accessories, stickers
front grille, or front bumper. For
(including transparent stickers), etc. to
details, contact any authorized Lexus
the driver monitor camera or its sur-
retailer or Lexus authorized repairer,
rounding area.
or any reliable repairer.
● Do not allow the driver monitor cam-
era or its surrounding area to get wet.
2384-5. Using the driving support systemsor when in a tunnelWARNING● When the lens of a headlight is dirty and● Do not cover the driver monitor cam-illumination is weakera or place anything in front of it.● When the headlights are misaligned● Keep the lens of the driver monitor● When a headlight is malfunctioningcamera free from damage.● When the headlights of another vehicle,sunlight, or reflected light shines directly● Do not touch the lens of the driverinto the front cameramonitor camera or allow it to becomedirty.● When the brightness of the surroundingarea changes suddenlyWhen there is dirt or fingerprints on thecamera lens, clean it with a dry, soft cloth● When driving near a TV tower, broad-casting station, electric power plant,so as to not mark or damage equipped vehicles, etc., or other● When cleaning the lens, do not uselocation where strong radio waves ordetergents or organic solvents thatelectrical noise may be presentmay damage plastic.● When a wiper blade is blocking the frontcamera● When in a location or near objects which■ Precautions for usestrongly reflect radio waves, such as theIt is necessary to enter a connected ser-following:vices contract, provided by Lexus, to use• Tunnelsthese functions. For details, contact any• Truss bridgesauthorized Lexus retailer or Lexus autho-• Gravel roadsrized repairer, or any reliable repairer• Rutted, snow-covered roads• Walls● LCA (Lane Change Assist) (if equipped)• Large trucksP.258• Manhole covers• Guardrail■ Situations in which the sensors and the• Metal platessystems may not operate properly● When near a step or protrusion● When the height or inclination of thevehicle has been changed due to modifi-● When a detectable vehicle is narrow,cationssuch as a small mobility vehicle● When the windshield is dirty, fogged up,● When a detectable vehicle has a smallcracked or damagedfront or rear end, such as an unloadedtruck● When the ambient temperature is high orlow● When a detectable vehicle has a lowfront
238
4-5. Using the driving support systems
or when in a tunnel
WARNING
● When the lens of a headlight is dirty and
● Do not cover the driver monitor cam-
illumination is weak
era or place anything in front of it.
● When the headlights are misaligned
● Keep the lens of the driver monitor
● When a headlight is malfunctioning
camera free from damage.
● When the headlights of another vehicle,
sunlight, or reflected light shines directly
● Do not touch the lens of the driver
into the front camera
monitor camera or allow it to become
dirty.
● When the brightness of the surrounding
area changes suddenly
When there is dirt or fingerprints on the
camera lens, clean it with a dry, soft cloth
● When driving near a TV tower, broad-
casting station, electric power plant,
so as to not mark or damage it.
radar equipped vehicles, etc., or other
● When cleaning the lens, do not use
location where strong radio waves or
detergents or organic solvents that
electrical noise may be present
may damage plastic.
● When a wiper blade is blocking the front
camera
● When in a location or near objects which
■ Precautions for use
strongly reflect radio waves, such as the
It is necessary to enter a connected ser-
following:
vices contract, provided by Lexus, to use
• Tunnels
these functions. For details, contact any
• Truss bridges
authorized Lexus retailer or Lexus autho-
• Gravel roads
rized repairer, or any reliable repairer
• Rutted, snow-covered roads
• Walls
● LCA (Lane Change Assist) (if equipped)
• Large trucks
P.258
• Manhole covers
• Guardrail
■ Situations in which the sensors and the
• Metal plates
systems may not operate properly
● When near a step or protrusion
● When the height or inclination of the
vehicle has been changed due to modifi-
● When a detectable vehicle is narrow,
cations
such as a small mobility vehicle
● When the windshield is dirty, fogged up,
● When a detectable vehicle has a small
cracked or damaged
front or rear end, such as an unloaded
truck
● When the ambient temperature is high or
low
● When a detectable vehicle has a low
front or rear end, such as a low bed trailer
● When mud, water, snow, dead insects,
foreign matter, etc., is attached to the
front of the sensor
● When in inclement weather such as
heavy rain, fog, snow, or a sandstorm
● When water, snow, dust, etc. is thrown up
in front of the vehicle, or when driving
through mist or smoke
● When the headlights are not illuminated
while driving in the dark, such as at night
● When a detectable vehicle has extremely
4-5. Using the driving support systems239high ground clearancefrom the shape of a curve● When the vehicle speed is excessivelyhigh when entering a curve● When entering/exiting a parking lot,garage, car elevator, etc.● When driving in a parking lot● When driving through an area wherethere are obstructions which may contactyour vehicle, such as tall grass, tree● When a detectable vehicle is carrying abranches, a curtain, which protrudes from its cargo area● When driving in strong wind● When a detectable vehicle has little■ Situations in which the lane may not beexposed metal, such as a vehicle which isdetectedpartially covered with cloth, etc.● When the lane is extremely wide or nar-● When a detectable vehicle is irregularlyrowshaped, such as a tractor, sidecar, etc.● Immediately after changing lanes or● When the distance between the vehiclepassing through an intersectionand a detectable vehicle has become4● When driving in a temporary lane or laneextremely shortregulated by construction● When a detectable vehicle is at an angle● When there are structures, patterns,Driving● When snow, mud, etc. is attached to ashadows which are similar to lane lines indetectable vehiclethe surrounding● When driving on the following kinds of● When there are multiple white lines for aroads:lane line• Roads with sharp curves or winding● When the lane lines are not clear or driv-roadsing on a wet road surface• Roads with changes in grade, such assudden inclines or declines● When a lane line is on a curb• Roads which is sloped to the left or right● When driving on a bright, reflective road• Roads with deep rutssurface, such as concrete• Roads which are rough and unmain-tained■ Situations in which some or all of the• Roads which frequently undulate or arefunctions of the system cannot operatebumpy● When a malfunction is detected in this● When the steering wheel is being oper-system or a related system, such as theated frequently or suddenlybrakes, steering, etc.● When the vehicle i
4-5. Using the driving support systems
239
high ground clearance
from the shape of a curve
● When the vehicle speed is excessively
high when entering a curve
● When entering/exiting a parking lot,
garage, car elevator, etc.
● When driving in a parking lot
● When driving through an area where
there are obstructions which may contact
your vehicle, such as tall grass, tree
● When a detectable vehicle is carrying a
branches, a curtain, etc.
load which protrudes from its cargo area
● When driving in strong wind
● When a detectable vehicle has little
■ Situations in which the lane may not be
exposed metal, such as a vehicle which is
detected
partially covered with cloth, etc.
● When the lane is extremely wide or nar-
● When a detectable vehicle is irregularly
row
shaped, such as a tractor, sidecar, etc.
● Immediately after changing lanes or
● When the distance between the vehicle
passing through an intersection
and a detectable vehicle has become
4
● When driving in a temporary lane or lane
extremely short
regulated by construction
● When a detectable vehicle is at an angle
● When there are structures, patterns,
Driving
● When snow, mud, etc. is attached to a
shadows which are similar to lane lines in
detectable vehicle
the surrounding
● When driving on the following kinds of
● When there are multiple white lines for a
roads:
lane line
• Roads with sharp curves or winding
● When the lane lines are not clear or driv-
roads
ing on a wet road surface
• Roads with changes in grade, such as
sudden inclines or declines
● When a lane line is on a curb
• Roads which is sloped to the left or right
● When driving on a bright, reflective road
• Roads with deep ruts
surface, such as concrete
• Roads which are rough and unmain-
tained
■ Situations in which some or all of the
• Roads which frequently undulate or are
functions of the system cannot operate
bumpy
● When a malfunction is detected in this
● When the steering wheel is being oper-
system or a related system, such as the
ated frequently or suddenly
brakes, steering, etc.
● When the vehicle is not in a constant
● When the VSC, TRC, or other safety
position within a lane
related system is operating
● When parts related to this system, the
● When the VSC, TRC, or other safety
brakes, etc. are cold or extremely hot,
related system is off
wet, etc.
■ Changes in brake operation sound and
● When the wheels are misaligned
pedal response
● When driving on slick road surfaces, such
● When the brakes have been operated,
as when it is covered with ice, snow,
brake operation sounds may be heard
gravel, etc.
and the brake pedal response may
change, but this does not indicate a mal-
● When the course of the vehicle differs
2404-5. Using the driving support systemsfunction.● When the driver is laughing or their eyesare only slightly open● When the system is operating, the brakepedal may feel stiffer than expected or● When the driver’s eyes, nose, mouth, orsink. In either situation the brake pedalshape of their face is blockedcan be depressed further. Further● When the driver is wearing makeupdepress the brake pedal as makes it difficult to detect theireyes, nose, mouth, or shape of their face■ Situations in which the driver monitormay not operate properly● When the driver’s eyes are blocked bythe frame of eyeglasses, sunglasses, hair,In situations such as the following, the camera may not be able to detectthe driver’s face, and the function may not● When there is a device inside the vehicleoperate radiates near infrared rays, such as anon-genuine driver monitoring system.● When the inside of the vehicle is hot, suchas after the vehicle has been parked inthe sun● When a very bright light, such as the sunor the headlights of following vehicle,shines onto the driver monitor camera● When the brightness inside the vehiclechanges frequently due to the shadows ofsurrounding structures, etc.● When a very bright light, such as the sunor the headlights of an oncoming vehicle,is shining onto the driver’s face● When light, either inside or outside of thevehicle, is being reflected from the lensesof eyeglasses or sunglasses● When there are multiple faces in thedetection range of the driver monitorcamera, such as when a front or rear pas-senger is leaning toward the driver’s seat● When the driver’s face is outside of thedetection range of the driver monitorcamera, such as when leaned forward orwhen their head is outside of the window● When the driver monitor camera is beingblocked by the steering wheel, a handholding the steering wheel, an arm, etc.● When the driver is wearing a hat● When the driver is wearing an eyepatch● When the driver is wearing ey
240
4-5. Using the driving support systems
function.
● When the driver is laughing or their eyes
are only slightly open
● When the system is operating, the brake
pedal may feel stiffer than expected or
● When the driver’s eyes, nose, mouth, or
sink. In either situation the brake pedal
shape of their face is blocked
can be depressed further. Further
● When the driver is wearing makeup
depress the brake pedal as necessary.
which makes it difficult to detect their
eyes, nose, mouth, or shape of their face
■ Situations in which the driver monitor
may not operate properly
● When the driver’s eyes are blocked by
the frame of eyeglasses, sunglasses, hair,
In situations such as the following, the driver
etc.
monitor camera may not be able to detect
the driver’s face, and the function may not
● When there is a device inside the vehicle
operate properly.
that radiates near infrared rays, such as a
non-genuine driver monitoring system.
● When the inside of the vehicle is hot, such
as after the vehicle has been parked in
the sun
● When a very bright light, such as the sun
or the headlights of following vehicle,
shines onto the driver monitor camera
● When the brightness inside the vehicle
changes frequently due to the shadows of
surrounding structures, etc.
● When a very bright light, such as the sun
or the headlights of an oncoming vehicle,
is shining onto the driver’s face
● When light, either inside or outside of the
vehicle, is being reflected from the lenses
of eyeglasses or sunglasses
● When there are multiple faces in the
detection range of the driver monitor
camera, such as when a front or rear pas-
senger is leaning toward the driver’s seat
● When the driver’s face is outside of the
detection range of the driver monitor
camera, such as when leaned forward or
when their head is outside of the window
● When the driver monitor camera is being
blocked by the steering wheel, a hand
holding the steering wheel, an arm, etc.
● When the driver is wearing a hat
● When the driver is wearing an eyepatch
● When the driver is wearing eyeglasses or
sunglasses that do not easily transmit
infrared rays
● When the driver is wearing contact
lenses
● When the driver is wearing a face mask
4-5. Using the driving support systems241face identification function, prioritiesDriver monitoramong other devices of individualidentification, and linked vehicle set-Basic functionstings, see “My Settings”. (P.172)During controlled driving, the driverWARNINGmonitor camera detects the position■ For safe useand direction the driver is facing, and● The driver monitor is not designed towhether their eyes are opened orprevent the driver from driving care-closed. Through this, the system deter-lessly or having a poor driving if the driver is checking their sur-Pay careful attention to the surround-ing conditions in order to ensure saferoundings and if the driver can operations.● The driver monitor cannot reducedrowsiness. If you feel unable to con-centrate or drowsy, take a break andsleep as necessary in order to ensuresafe driving.4■ Warning functionDrivingThese functions may not operate when thevehicle speed is low.■ Face identification■ Warning functionFace identification starts when the door isopened then situations such as the following, aIn face identification, facial traits are digi-buzzer will sound and a message willtized and stored in a built-in computer, tobe displayed to warn the used for identification in My Settings.● Face image or video are not stored. When the system determines thatVoice is not stored driver is not paying attention to● Digitized face information is not used forthe road or their eyes are closedany purpose other than identification inMy Settings. Additionally, face informa- When the driver’s face cannot betion cannot be decoded and will not bedetected or the system determinesdisclosed or provided to a third the driver has poor driving pos-● Face information can be deleted by your-tureself.● For the handling of face information,■ Face identificationplease consent to the following beforeThe driver monitor is used as a deviceusing it:• Face identification does no
4-5. Using the driving support systems
241
face identification function, priorities
Driver monitor
among other devices of individual
identification, and linked vehicle set-
Basic functions
tings, see “My Settings”. (P.172)
During controlled driving, the driver
WARNING
monitor camera detects the position
■ For safe use
and direction the driver is facing, and
● The driver monitor is not designed to
whether their eyes are opened or
prevent the driver from driving care-
closed. Through this, the system deter-
lessly or having a poor driving posture.
mines if the driver is checking their sur-
Pay careful attention to the surround-
ing conditions in order to ensure safe
roundings and if the driver can perform
driving.
driving operations.
● The driver monitor cannot reduce
drowsiness. If you feel unable to con-
centrate or drowsy, take a break and
sleep as necessary in order to ensure
safe driving.
4
■ Warning function
Driving
These functions may not operate when the
vehicle speed is low.
■ Face identification
■ Warning function
Face identification starts when the door is
opened then closed.
In situations such as the following, a
In face identification, facial traits are digi-
buzzer will sound and a message will
tized and stored in a built-in computer, to
be displayed to warn the driver.
be used for identification in My Settings.
● Face image or video are not stored.
 When the system determines that
Voice is not stored either.
the driver is not paying attention to
● Digitized face information is not used for
the road or their eyes are closed
any purpose other than identification in
My Settings. Additionally, face informa-
 When the driver’s face cannot be
tion cannot be decoded and will not be
detected or the system determines
disclosed or provided to a third party.
that the driver has poor driving pos-
● Face information can be deleted by your-
ture
self.
● For the handling of face information,
■ Face identification
please consent to the following before
The driver monitor is used as a device
using it:
• Face identification does not guarantee a
to identify faces in order to identify an
complete identity authentication, colla-
individual.
tion, or identification.
• When face information registration fails
For information about how to use the
frequently or face identification fails fre-
2424-5. Using the driving support systemsquently, the driver cameras should bePCS (Pre-Collision System)cleaned or face information should beregistered again.• Face information stored in the vehicleThe pre-collision system uses sen-computer cannot be decoded or movedsors to detect objects (P.243) into another media. Therefore, it is neces-sary to register face information againthe path of the vehicle. When theonce it is deleted or relevant parts aresystem determines that the of a frontal collision with a• Once deleted, face information cannotbe restored. It is necessary to registerdetectable object is high, a warningface information to urge the driver to take■ Situations where face identification mayevasive action and the potentialnot be performed correctlybrake pressure is increased to helpThis system is designed for use to identifythe driver avoid the collision. If thefacial traits. In the following situations, faceinformation may not be able to be regis-system determines that the possi-tered or identified correctly:bility of a collision is extremely high,● When a part of the driver’s face (eye-the brakes are automaticallybrows, eyes, nose, or mouth) is not visibleapplied to help avoid the collision or● When the driver is wearing glasses/sunhelp reduce the impact of the colli-glasses, a face mask, muffler, .● When the driver is not facing front● When part of driver’s face is coveredThe pre-collision system can be dis-with hair, beard, a hand, clothes, jewelry,abled/enabled and the warning can be changed. (P.252)● When the driver is closing eyes● When a non-registered driver is a twin,WARNINGetc. with a registered driver, whose facelooks quite alike with each other■ For safe use■ Situations in which the driver monitor● Driving safely is solely the responsibil-may not operate properlyity of the driver. Pay careful attentionto the surrounding conditions in orderP.240to ensure safe use the pre-c
242
4-5. Using the driving support systems
quently, the driver cameras should be
PCS (Pre-Collision System)
cleaned or face information should be
registered again.
• Face information stored in the vehicle
The pre-collision system uses sen-
computer cannot be decoded or moved
sors to detect objects (P.243) in
to another media. Therefore, it is neces-
sary to register face information again
the path of the vehicle. When the
once it is deleted or relevant parts are
system determines that the possi-
replaced.
bility of a frontal collision with a
• Once deleted, face information cannot
be restored. It is necessary to register
detectable object is high, a warning
face information again.
operates to urge the driver to take
■ Situations where face identification may
evasive action and the potential
not be performed correctly
brake pressure is increased to help
This system is designed for use to identify
the driver avoid the collision. If the
facial traits. In the following situations, face
information may not be able to be regis-
system determines that the possi-
tered or identified correctly:
bility of a collision is extremely high,
● When a part of the driver’s face (eye-
the brakes are automatically
brows, eyes, nose, or mouth) is not visible
applied to help avoid the collision or
● When the driver is wearing glasses/sun
help reduce the impact of the colli-
glasses, a face mask, muffler, etc.
sion.
● When the driver is not facing front
● When part of driver’s face is covered
The pre-collision system can be dis-
with hair, beard, a hand, clothes, jewelry,
abled/enabled and the warning tim-
etc.
ing can be changed. (P.252)
● When the driver is closing eyes
● When a non-registered driver is a twin,
WARNING
etc. with a registered driver, whose face
looks quite alike with each other
■ For safe use
■ Situations in which the driver monitor
● Driving safely is solely the responsibil-
may not operate properly
ity of the driver. Pay careful attention
to the surrounding conditions in order
P.240
to ensure safe driving.
Never use the pre-collision system in
Changing Driver monitor set-
place of normal braking operations. This
tings
system cannot help avoid or reduce the
impact of a collision in every situation.
The settings of Driver monitor can be
Over-reliance on this system to drive the
changed through customize settings.
vehicle safely may lead to an accident
(P.566)
resulting in death or serious injury.
4-5. Using the driving support systems243information display to urge the driverWARNINGto take evasive action.● Although the pre-collision system isIf the detectable object is a vehicle,designed to help avoid or help reducethe impact of a collision, its effective-moderate braking will be performedness may change according to variouswith the . Therefore, it may notalways be able to achieve the samelevel of the following items carefully. Donot overly rely on this system and alwaysdrive carefully.• For safe use: P.230■ When to disable the pre-collision sys-tem● When it is necessary to disable the sys-tem: P.233If the system determines that the accel-erator pedal is strongly depressed, the4following icon and message will be dis-Detectable objectsplayed on the multi-information dis-DrivingThe system can detect the following objects. (Detectableobjects differ depending on the func-tion.) Vehicles Bicycles * Pedestrians Motorcycles * Walls■ Pre-collision brake assist*If the system determines that the possi-: Detected as a detectable object onlywhen being of a collision is high and the brakeoperation by the driver is insufficient,System functionsthe braking power will be increased.■ Pre-collision brake control■ Pre-collision warningIf the system determines that the possi-When the system determines that thebility of a collision is extremely high, thepossibility of a collision is high, a buzzerbrakes are automatically applied towill sound and an icon and warninghelp avoid the collision or reduce themessage will be displayed on the multi-
4-5. Using the driving support systems
243
information display to urge the driver
WARNING
to take evasive action.
● Although the pre-collision system is
If the detectable object is a vehicle,
designed to help avoid or help reduce
the impact of a collision, its effective-
moderate braking will be performed
ness may change according to various
with the warning.
conditions. Therefore, it may not
always be able to achieve the same
level of performance.
Read the following items carefully. Do
not overly rely on this system and always
drive carefully.
• For safe use: P.230
■ When to disable the pre-collision sys-
tem
● When it is necessary to disable the sys-
tem: P.233
If the system determines that the accel-
erator pedal is strongly depressed, the
4
following icon and message will be dis-
Detectable objects
played on the multi-information dis-
Driving
The system can detect the following as
play.
detectable objects. (Detectable
objects differ depending on the func-
tion.)
 Vehicles
 Bicycles *
 Pedestrians
 Motorcycles *
 Walls
■ Pre-collision brake assist
*
If the system determines that the possi-
: Detected as a detectable object only
when being ridden.
bility of a collision is high and the brake
operation by the driver is insufficient,
System functions
the braking power will be increased.
■ Pre-collision brake control
■ Pre-collision warning
If the system determines that the possi-
When the system determines that the
bility of a collision is extremely high, the
possibility of a collision is high, a buzzer
brakes are automatically applied to
will sound and an icon and warning
help avoid the collision or reduce the
message will be displayed on the multi-
2444-5. Using the driving support systemsimpact of the determines that the possibilityof a collision is high, the pre-collision■ Emergency steering assistwarning and pre-collision braking willIf the system determines that the conditions are met, assistanceDepending on the intersection, assis-will be provided to help enhance vehi-tance may not operate stability and prevent lane depar- When turning left/right at an inter-ture. During assistance, in addition tothe pre-collision warning, the follow-section and crossing the path of aning icon will be displayed on the multi-oncoming vehicleinformation display. The possibility of a collision is high There is sufficient space within thelane to perform evasive steeringmaneuvers The driver is operating the steeringwheelVehicles with active steering function: When turning left/right and aThe brakes and steering are controlledpedestrian or bicycle is detectedto help avoid a collision or reduce theimpact of a collision, regardless of theevasive steering maneuvers per-formed by the assistance, the pre-collisionwarning will operate and a messagewill be displayed to warn the driver.■ Intersection collision avoidancesupport (crossing vehicles)At an intersection, etc., if the systemdetermines that the possibility of a col-lision with an approaching vehicle ormotorcycle is high, the pre-collisionwarning and pre-collision braking will■ Intersection collision (left/right turn)Depending on the intersection, assis-In situations such as the following, if the
244
4-5. Using the driving support systems
impact of the collision.
system determines that the possibility
of a collision is high, the pre-collision
■ Emergency steering assist
warning and pre-collision braking will
If the system determines that the fol-
operate.
lowing conditions are met, assistance
Depending on the intersection, assis-
will be provided to help enhance vehi-
tance may not operate correctly.
cle stability and prevent lane depar-
 When turning left/right at an inter-
ture. During assistance, in addition to
the pre-collision warning, the follow-
section and crossing the path of an
ing icon will be displayed on the multi-
oncoming vehicle
information display.
 The possibility of a collision is high
 There is sufficient space within the
lane to perform evasive steering
maneuvers
 The driver is operating the steering
wheel
Vehicles with active steering function:
 When turning left/right and a
The brakes and steering are controlled
pedestrian or bicycle is detected
to help avoid a collision or reduce the
impact of a collision, regardless of the
evasive steering maneuvers per-
formed by the driver.
During assistance, the pre-collision
warning will operate and a message
will be displayed to warn the driver.
■ Intersection collision avoidance
support (crossing vehicles)
At an intersection, etc., if the system
determines that the possibility of a col-
lision with an approaching vehicle or
motorcycle is high, the pre-collision
warning and pre-collision braking will
■ Intersection collision avoidance
operate.
support (left/right turn)
Depending on the intersection, assis-
In situations such as the following, if the
4-5. Using the driving support systems245tance may not operate correctly.● The pre-collision braking function isnot designed to hold the vehiclestopped. If the vehicle is stopped bypre-collision brake control, the drivershould operate the brakes immedi-ately as necessary.● The pre-collision braking function maynot operate if certain operations areperformed by the driver. If the acceler-ator pedal is being depressed stronglyor the steering wheel is being turned,the system may determine that the■ Acceleration Suppression at Lowdriver is taking evasive action and pos-sibly prevent the pre-collision brakingSpeedfunction from driving at a low speed, if the● If the brake pedal is being depressed,accelerator pedal is stronglythe system may determine that thedepressed and the system determinesdriver is taking evasive action and pos-sibly delay the operation timing of thethat there is a possibility of a collision,4pre-collision brake system output will be restrained■ Acceleration Suppression at Lowor the brakes will be applied weakly toDrivingSpeedrestrict acceleration. During operation,If the steering wheel is being turned, thea buzzer will sound and a warning indi-system may determine that the driver iscator and message will be displayed ontaking evasive action and possibly pre-vent the Acceleration Suppression atthe multi-information Speed function from operating orpossibly causing its operation to be can-celed.■ Emergency steering assist● The emergency steering assist will becanceled when the system determinesthat lane departure prevention controlhas completed.● Depending on operations performedby the driver, emergency steeringassist may not operate or operationmay be ■ Pre-collision braking• If the accelerator pedal is depressedstrongly, the steering wheel is turned● When the pre-collision braking func-heavily, the brake pedal is depressed,tion is operating, a large amount ofor the turn signal lever is operated,
4-5. Using the driving support systems
245
tance may not operate correctly.
● The pre-collision braking function is
not designed to hold the vehicle
stopped. If the vehicle is stopped by
pre-collision brake control, the driver
should operate the brakes immedi-
ately as necessary.
● The pre-collision braking function may
not operate if certain operations are
performed by the driver. If the acceler-
ator pedal is being depressed strongly
or the steering wheel is being turned,
the system may determine that the
■ Acceleration Suppression at Low
driver is taking evasive action and pos-
sibly prevent the pre-collision braking
Speed
function from operating.
When driving at a low speed, if the
● If the brake pedal is being depressed,
accelerator pedal is strongly
the system may determine that the
depressed and the system determines
driver is taking evasive action and pos-
sibly delay the operation timing of the
that there is a possibility of a collision,
4
pre-collision brake control.
hybrid system output will be restrained
■ Acceleration Suppression at Low
or the brakes will be applied weakly to
Driving
Speed
restrict acceleration. During operation,
If the steering wheel is being turned, the
a buzzer will sound and a warning indi-
system may determine that the driver is
cator and message will be displayed on
taking evasive action and possibly pre-
vent the Acceleration Suppression at
the multi-information display.
Low Speed function from operating or
possibly causing its operation to be can-
celed.
■ Emergency steering assist
● The emergency steering assist will be
canceled when the system determines
that lane departure prevention control
has completed.
● Depending on operations performed
by the driver, emergency steering
assist may not operate or operation
may be canceled.
WARNING
■ Pre-collision braking
• If the accelerator pedal is depressed
strongly, the steering wheel is turned
● When the pre-collision braking func-
heavily, the brake pedal is depressed,
tion is operating, a large amount of
or the turn signal lever is operated, the
braking force will be applied.
system may determine that the driver
is taking evasive action and the emer-
gency steering assist may not operate.
2464-5. Using the driving support systemsWARNING• While the emergency steering assist isoperating, if the accelerator pedal isdepressed strongly, the steering wheelis turned heavily, or the brake pedal isdepressed, the system may determinethat the driver is taking evasive actionand emergency steering assist opera-tion may be canceled.• While the emergency steering assist isoperating, if the steering wheel is heldor turned in the opposite direction ofsystem operation, emergency steer-ing assist operation will be canceled.■ Operating conditions of each function of the pre-collision systemThe pre-collision system is enabled and the system determines that the possibility of a fron-tal collision with a detected object is , the system will not operate in the following situations:● When the vehicle has not been driven a certain amount after a terminal of the 12-volt bat-tery has been disconnected and reconnected● When the shift position is in R● When the VSC OFF indicator is illuminated (only the pre-collision warning function willbe operational)The following are the operational speeds and cancelation conditions of each function:● Pre-collision warningRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 5 to 180Approximately 5 to 180vehicleskm/h (3 to 110 mph)km/h (3 to 110 mph)Approximately 30 to 180Approximately 80 to 220Oncoming vehicleskm/h (20 to 110 mph)km/h (50 to 130 mph)Approximately 5 to 80 km/h Approximately 5 to 80 km/hBicycles(3 to 50 mph)(3 to 50 mph)Approximately 5 to 80 km/h Approximately 5 to 80 km/hPedestrians(3 to 50 mph)(3 to 50 mph)
246
4-5. Using the driving support systems
WARNING
• While the emergency steering assist is
operating, if the accelerator pedal is
depressed strongly, the steering wheel
is turned heavily, or the brake pedal is
depressed, the system may determine
that the driver is taking evasive action
and emergency steering assist opera-
tion may be canceled.
• While the emergency steering assist is
operating, if the steering wheel is held
or turned in the opposite direction of
system operation, emergency steer-
ing assist operation will be canceled.
■ Operating conditions of each function of the pre-collision system
The pre-collision system is enabled and the system determines that the possibility of a fron-
tal collision with a detected object is high.
However, the system will not operate in the following situations:
● When the vehicle has not been driven a certain amount after a terminal of the 12-volt bat-
tery has been disconnected and reconnected
● When the shift position is in R
● When the VSC OFF indicator is illuminated (only the pre-collision warning function will
be operational)
The following are the operational speeds and cancelation conditions of each function:
● Pre-collision warning
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 5 to 180
Approximately 5 to 180
vehicles
km/h (3 to 110 mph)
km/h (3 to 110 mph)
Approximately 30 to 180
Approximately 80 to 220
Oncoming vehicles
km/h (20 to 110 mph)
km/h (50 to 130 mph)
Approximately 5 to 80 km/h Approximately 5 to 80 km/h
Bicycles
(3 to 50 mph)
(3 to 50 mph)
Approximately 5 to 80 km/h Approximately 5 to 80 km/h
Pedestrians
(3 to 50 mph)
(3 to 50 mph)
4-5. Using the driving support systems247Relative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding motorcycles,Approximately 5 to 180Approximately 5 to 180stopped motorcycleskm/h (3 to 110 mph)km/h (3 to 110 mph)Approximately 30 to 180Approximately 30 to 180Oncoming motorcycleskm/h (20 to 110 mph)km/h (20 to 110 mph)While the pre-collision warning is operating, if the steering wheel is operated heavily or sud-denly, the pre-collision warning may be cancelled.● Pre-collision brake assistRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 30 to 180Approximately 10 to 180vehicleskm/h (20 to 110 mph)km/h (7 to 110 mph)Approximately 30 to 80Approximately 30 to 80Bicycles4km/h (20 to 50 mph)km/h (20 to 50 mph)Approximately 30 to 80Approximately 30 to 80DrivingPedestrianskm/h (20 to 50 mph)km/h (20 to 50 mph)Preceding motorcycles,Approximately 30 to 180Approximately 10 to 80stopped motorcycleskm/h (20 to 110 mph)km/h (7 to 50 mph)● Pre-collision brakingRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 5 to 180Approximately 5 to 180vehicleskm/h (3 to 110 mph)km/h (3 to 110 mph)Approximately 30 to 180Approximately 80 to 220Oncoming vehicleskm/h (20 to 110 mph)km/h (50 to 130 mph)Approximately 5 to 80 km/h Approximately 5 to 80 km/hBicycles(3 to 50 mph)(3 to 50 mph)Approximately 5 to 80 km/h Approximately 5 to 80 km/hPedestrians(3 to 50 mph)(3 to 50 mph)Preceding motorcycles,Approximately 5 to 180Approximately 5 to 80 km/hstopped motorcycleskm/h (3 to 110 mph)(3 to 50 mph)Approximately 30 to 180Approximately 30 to 180Oncoming motorcycleskm/h (20 to 110 mph)km/h (20 to 110 mph)
4-5. Using the driving support systems
247
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding motorcycles,
Approximately 5 to 180
Approximately 5 to 180
stopped motorcycles
km/h (3 to 110 mph)
km/h (3 to 110 mph)
Approximately 30 to 180
Approximately 30 to 180
Oncoming motorcycles
km/h (20 to 110 mph)
km/h (20 to 110 mph)
While the pre-collision warning is operating, if the steering wheel is operated heavily or sud-
denly, the pre-collision warning may be cancelled.
● Pre-collision brake assist
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 30 to 180
Approximately 10 to 180
vehicles
km/h (20 to 110 mph)
km/h (7 to 110 mph)
Approximately 30 to 80
Approximately 30 to 80
Bicycles
4
km/h (20 to 50 mph)
km/h (20 to 50 mph)
Approximately 30 to 80
Approximately 30 to 80
Driving
Pedestrians
km/h (20 to 50 mph)
km/h (20 to 50 mph)
Preceding motorcycles,
Approximately 30 to 180
Approximately 10 to 80
stopped motorcycles
km/h (20 to 110 mph)
km/h (7 to 50 mph)
● Pre-collision braking
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 5 to 180
Approximately 5 to 180
vehicles
km/h (3 to 110 mph)
km/h (3 to 110 mph)
Approximately 30 to 180
Approximately 80 to 220
Oncoming vehicles
km/h (20 to 110 mph)
km/h (50 to 130 mph)
Approximately 5 to 80 km/h Approximately 5 to 80 km/h
Bicycles
(3 to 50 mph)
(3 to 50 mph)
Approximately 5 to 80 km/h Approximately 5 to 80 km/h
Pedestrians
(3 to 50 mph)
(3 to 50 mph)
Preceding motorcycles,
Approximately 5 to 180
Approximately 5 to 80 km/h
stopped motorcycles
km/h (3 to 110 mph)
(3 to 50 mph)
Approximately 30 to 180
Approximately 30 to 180
Oncoming motorcycles
km/h (20 to 110 mph)
km/h (20 to 110 mph)
2484-5. Using the driving support systemsIf either of the following occur while the pre-collision braking function is operating, it will becanceled:• The accelerator pedal is strongly depressed• The steering wheel is operated heavily or suddenly● Emergency steering assistThe emergency steering assist will not operate when the turn signal lights are speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 40 to 80Approximately 40 to 80vehicles, bicycles, pedestri-km/h (25 to 50 mph)km/h (25 to 50 mph)ans, motorcyclesPreceding vehicles, stopped Active steering function (if Active steering function (ifvehicles, bicycles, pedestri- equipped): * to 80 km/h ( * to equipped): * to 80 km/h ( * toans, motorcycles50 mph)50 mph)*: Minimum vehicle speed: Vehicle speed at which evasion using pre-collision brake con-trol is difficultWhile the emergency steering assist is operating, if any of the following are performed,emergency steering assist operation may be cancelled:• The accelerator pedal is strongly depressed• The steering wheel is operated heavily or suddenly• The brake pedal is depressed● Intersection collision avoidance support (left/right turn)The intersection collision avoidance support (for left/right turning vehicles) will not operatewhen the turn signal lights are not speedOncoming vehicleDetectable objectsVehicle speedbetween your vehi-speedcle and objectApproximately 5 toApproximately 5 to Approximately 10 toOncoming vehicles40 km/h (3 to 2575 km/h (3 to 45115 km/h (7 to 70mph)mph)mph)Approximately 5 toApproximately 5 toPedestrians30 km/h (3 to 20-40 km/h (3 to 25mph)mph)
248
4-5. Using the driving support systems
If either of the following occur while the pre-collision braking function is operating, it will be
canceled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
● Emergency steering assist
The emergency steering assist will not operate when the turn signal lights are flashing.
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 40 to 80
Approximately 40 to 80
vehicles, bicycles, pedestri-
km/h (25 to 50 mph)
km/h (25 to 50 mph)
ans, motorcycles
Preceding vehicles, stopped Active steering function (if Active steering function (if
vehicles, bicycles, pedestri- equipped): * to 80 km/h ( * to equipped): * to 80 km/h ( * to
ans, motorcycles
50 mph)
50 mph)
*
: Minimum vehicle speed: Vehicle speed at which evasion using pre-collision brake con-
trol is difficult
While the emergency steering assist is operating, if any of the following are performed,
emergency steering assist operation may be cancelled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
• The brake pedal is depressed
● Intersection collision avoidance support (left/right turn)
The intersection collision avoidance support (for left/right turning vehicles) will not operate
when the turn signal lights are not flashing.
Relative speed
Oncoming vehicle
Detectable objects
Vehicle speed
between your vehi-
speed
cle and object
Approximately 5 to
Approximately 5 to Approximately 10 to
Oncoming vehicles
40 km/h (3 to 25
75 km/h (3 to 45
115 km/h (7 to 70
mph)
mph)
mph)
Approximately 5 to
Approximately 5 to
Pedestrians
30 km/h (3 to 20
-
40 km/h (3 to 25
mph)
mph)
4-5. Using the driving support systems249Relative speedOncoming vehicleDetectable objectsVehicle speedbetween your vehi-speedcle and objectApproximately 5 toApproximately 5 toBicycles30 km/h (3 to 20-50 km/h (3 to 30mph)mph)Approximately 5 toApproximately 5 to Approximately 10 toOncoming motorcy-40 km/h (3 to 2575 km/h (3 to 45115 km/h (7 to 70clesmph)mph)mph)● Intersection collision avoidance support (crossing vehicles) Vehicles without front side radarsRelative speedCrossing vehicleDetectable objectsVehicle speedbetween your vehi-speedcle and object4• Your vehicleApproximately 5 tospeed or lessApproximately 5 toVehicles, Motorcy-60 km/h (3 to 38 • Approximately 40 60 km/h (3 to 38Drivingcles (side)mph)km/h or less (25mph)mph or less) Vehicles with front side radarsRelative speedCrossing vehicleDetectable objectsVehicle speedbetween your vehi-speedcle and objectApproximately 5 to Approximately 50Approximately 5 toVehicles, Motorcy-60 km/h (3 to 38 km/h or less (31 mph60 km/h (3 to 38cles (side)mph)or less)mph)When driving at approximately 40 km/h (29 mph) or more, this system will only operatewhen the speed of the other vehicle is approximately 40 km/h (29 mph) or system operates only when the crossing vehicle speed is same as or less than the vehi-cle speed.● Acceleration Suppression at Low SpeedThe Acceleration Suppression at Low Speed function will not operate when the turn signallights are flashing.
4-5. Using the driving support systems
249
Relative speed
Oncoming vehicle
Detectable objects
Vehicle speed
between your vehi-
speed
cle and object
Approximately 5 to
Approximately 5 to
Bicycles
30 km/h (3 to 20
-
50 km/h (3 to 30
mph)
mph)
Approximately 5 to
Approximately 5 to Approximately 10 to
Oncoming motorcy-
40 km/h (3 to 25
75 km/h (3 to 45
115 km/h (7 to 70
cles
mph)
mph)
mph)
● Intersection collision avoidance support (crossing vehicles)
 Vehicles without front side radars
Relative speed
Crossing vehicle
Detectable objects
Vehicle speed
between your vehi-
speed
cle and object
4
• Your vehicle
Approximately 5 to
speed or less
Approximately 5 to
Vehicles, Motorcy-
60 km/h (3 to 38 • Approximately 40 60 km/h (3 to 38
Driving
cles (side)
mph)
km/h or less (25
mph)
mph or less)
 Vehicles with front side radars
Relative speed
Crossing vehicle
Detectable objects
Vehicle speed
between your vehi-
speed
cle and object
Approximately 5 to Approximately 50
Approximately 5 to
Vehicles, Motorcy-
60 km/h (3 to 38 km/h or less (31 mph
60 km/h (3 to 38
cles (side)
mph)
or less)
mph)
When driving at approximately 40 km/h (29 mph) or more, this system will only operate
when the speed of the other vehicle is approximately 40 km/h (29 mph) or less.
The system operates only when the crossing vehicle speed is same as or less than the vehi-
cle speed.
● Acceleration Suppression at Low Speed
The Acceleration Suppression at Low Speed function will not operate when the turn signal
lights are flashing.
2504-5. Using the driving support systemsRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 0 to 15 km/h Approximately 0 to 15 km/hvehicles, Pedestrians, Bicy-(0 to 9 mph)(0 to 9 mph)cles, WallWhile the Acceleration Suppression at Low Speed function is operating, if any of the follow-ing are performed, the low speed sudden acceleration suppression function operation willbe cancelled:• The accelerator pedal is released.• The steering wheel is operated heavily or suddenly■ Detection of detectable objectsObjects are detected based on their size,shape, and on the ambient brightness,movement, posture and direction of adetectable object, it may not be detectedand the system may not operate system detects shapes, such as the fol-lowing, as detectable objects.• When there are patterns or a paintingahead of the vehicle that may be mis-taken for a detectable object• When passing a detectable object that ischanging lanes or turning left/right■ Situations in which the system mayoperate even though the possibility of acollision is not high● In certain situations, such as the following,• When passing a detectable object whichthe system may determine that the possi-is stopped to make a left/right turnbility of a collision is high and operate:• When passing a detectable object• When changing lanes while overtaking adetectable object• When suddenly approaching a detect-able object• When approaching a detectable objector other object on the roadside, such asguardrails, utility poles, trees, walls, etc.• When there is a detectable object orother object by the roadside at the• When a detectable object stops immedi-entrance of a curveately before entering the path of the vehi-cle
250
4-5. Using the driving support systems
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 0 to 15 km/h Approximately 0 to 15 km/h
vehicles, Pedestrians, Bicy-
(0 to 9 mph)
(0 to 9 mph)
cles, Wall
While the Acceleration Suppression at Low Speed function is operating, if any of the follow-
ing are performed, the low speed sudden acceleration suppression function operation will
be cancelled:
• The accelerator pedal is released.
• The steering wheel is operated heavily or suddenly
■ Detection of detectable objects
Objects are detected based on their size,
shape, and movement.
Depending on the ambient brightness,
movement, posture and direction of a
detectable object, it may not be detected
and the system may not operate properly.
The system detects shapes, such as the fol-
lowing, as detectable objects.
• When there are patterns or a painting
ahead of the vehicle that may be mis-
taken for a detectable object
• When passing a detectable object that is
changing lanes or turning left/right
■ Situations in which the system may
operate even though the possibility of a
collision is not high
● In certain situations, such as the following,
• When passing a detectable object which
the system may determine that the possi-
is stopped to make a left/right turn
bility of a collision is high and operate:
• When passing a detectable object
• When changing lanes while overtaking a
detectable object
• When suddenly approaching a detect-
able object
• When approaching a detectable object
or other object on the roadside, such as
guardrails, utility poles, trees, walls, etc.
• When there is a detectable object or
other object by the roadside at the
• When a detectable object stops immedi-
entrance of a curve
ately before entering the path of the vehi-
cle
4-5. Using the driving support systems251• When passing through a location with astructure above the road (traffic sign, bill-board, etc.)■ Situations in which the system may notoperate properly● In certain situations, such as the following,• When approaching an electric toll gatea detectable object may not be detectedbarrier, parking lot barrier, or other bar-by the front sensors, and the system mayrier that opens and closesnot operate properly:• When turning left/right and an oncoming• When a detectable object is approachingvehicle, oncoming motorcycle, pedes-your vehicletrian or bicycle crosses in front of the• When your vehicle or a detectable objectvehicleis wandering• When attempting to turn left/right in• When a detectable object makes an4front of an oncoming vehicle, oncomingabrupt maneuver (such as sudden swerv-motorcycle, pedestrian or bicycleing, acceleration or deceleration)• When turning left/right and an oncoming• When suddenly approaching a detect-Drivingvehicle, oncoming motorcycle, pedes-able objecttrian or bicycle stops or changes course• When the detectable object is near aimmediately before entering the path ofwall, fence, guardrail, manhole cover,the vehiclesteel plate on the road surface, or• When turning left/right and an oncominganother vehiclevehicle turns left/right in front of the vehi-• When there is a structure above acledetectable object• When part of a detectable object is hid-den by another object (large luggage,umbrella, guardrail, etc.)• When multiple detectable objects areoverlapping• When a bright light, such as the sun, isreflecting off of a detectable object• When a detectable object is white andlooks extremely bright• When the color or brightness of a detect-• When the steering wheel is operatedable object causes it to blend in with itstoward the path of an oncoming vehiclesurroundings• When there is an object moving above or• When a detectable object cuts in front ofunder the roador suddenly emerges in front of yourvehicle• Wh
4-5. Using the driving support systems
251
• When passing through a location with a
structure above the road (traffic sign, bill-
board, etc.)
■ Situations in which the system may not
operate properly
● In certain situations, such as the following,
• When approaching an electric toll gate
a detectable object may not be detected
barrier, parking lot barrier, or other bar-
by the front sensors, and the system may
rier that opens and closes
not operate properly:
• When turning left/right and an oncoming
• When a detectable object is approaching
vehicle, oncoming motorcycle, pedes-
your vehicle
trian or bicycle crosses in front of the
• When your vehicle or a detectable object
vehicle
is wandering
• When attempting to turn left/right in
• When a detectable object makes an
4
front of an oncoming vehicle, oncoming
abrupt maneuver (such as sudden swerv-
motorcycle, pedestrian or bicycle
ing, acceleration or deceleration)
• When turning left/right and an oncoming
• When suddenly approaching a detect-
Driving
vehicle, oncoming motorcycle, pedes-
able object
trian or bicycle stops or changes course
• When the detectable object is near a
immediately before entering the path of
wall, fence, guardrail, manhole cover,
the vehicle
steel plate on the road surface, or
• When turning left/right and an oncoming
another vehicle
vehicle turns left/right in front of the vehi-
• When there is a structure above a
cle
detectable object
• When part of a detectable object is hid-
den by another object (large luggage,
umbrella, guardrail, etc.)
• When multiple detectable objects are
overlapping
• When a bright light, such as the sun, is
reflecting off of a detectable object
• When a detectable object is white and
looks extremely bright
• When the color or brightness of a detect-
• When the steering wheel is operated
able object causes it to blend in with its
toward the path of an oncoming vehicle
surroundings
• When there is an object moving above or
• When a detectable object cuts in front of
under the road
or suddenly emerges in front of your
vehicle
• When approaching a vehicle which is
diagonal
• If a bicycle is a child sized bicycle, is car-
rying a large load, is carrying an extra
passenger, is carrying a forward leaning
rider, or has an unusual shape (bicycles
equipped with a child seat, tandem bicy-
2524-5. Using the driving support systemscles, etc.)• When at an intersection, the approaching• If a pedestrian or bicycle is shorter thancrossing vehicle is long in overall length,approximately 1 m (3.2 ft.) or taller thansuch as a large truck, towing trailer, 2 m (6.5 ft.).● In addition to the preceding, in certain sit-• When the silhouette of a pedestrian oruations, such as the following, the emer-bicycle is unclear (such as when they aregency steering assist may not operatewearing a raincoat, long skirt, etc.)properly:• When a pedestrian is bending forward or• When a detectable object is too close tosquattingthe vehicle• When a pedestrian or bicycle is moving• When there is insufficient space to per-at high speedform evasive steering maneuvers or an• When a pedestrian is pushing a stroller,obstruction exists in the evasion directionwheelchair, bicycle or other vehicle• When there is an oncoming vehicle• When a detectable object blends in with● In addition to the preceding, in certain sit-the surrounding area, such as when it isuations, such as the following, walls maydim (at dawn or dusk) or dark (at night ornot be detected as a target object and thein a tunnel)Acceleration Suppression at Low Speed• When the vehicle has not been driven forfunction may not operate properly:a certain amount of time after the hybrid• When scenery behind the wall is visible,system was startedsuch as a glass door, grid fence, etc.• While turning left/right or a few seconds• When the wall is slanted or lowafter turning left/right• When the wall is narrow, such as a pole,• While driving around a curve and a after driving around a curve• When the wall is made of plants, such as a• When turning left/right and an oncominghedge, is driving in a lane 3 or more lanes• When the road, etc. is reflected on thefrom the vehiclewall• When turning left/right and the direction• When the vehicle is approaching the wallof the vehicle differs greatly from th
252
4-5. Using the driving support systems
cles, etc.)
• When at an intersection, the approaching
• If a pedestrian or bicycle is shorter than
crossing vehicle is long in overall length,
approximately 1 m (3.2 ft.) or taller than
such as a large truck, towing trailer, etc.
approximately 2 m (6.5 ft.).
● In addition to the preceding, in certain sit-
• When the silhouette of a pedestrian or
uations, such as the following, the emer-
bicycle is unclear (such as when they are
gency steering assist may not operate
wearing a raincoat, long skirt, etc.)
properly:
• When a pedestrian is bending forward or
• When a detectable object is too close to
squatting
the vehicle
• When a pedestrian or bicycle is moving
• When there is insufficient space to per-
at high speed
form evasive steering maneuvers or an
• When a pedestrian is pushing a stroller,
obstruction exists in the evasion direction
wheelchair, bicycle or other vehicle
• When there is an oncoming vehicle
• When a detectable object blends in with
● In addition to the preceding, in certain sit-
the surrounding area, such as when it is
uations, such as the following, walls may
dim (at dawn or dusk) or dark (at night or
not be detected as a target object and the
in a tunnel)
Acceleration Suppression at Low Speed
• When the vehicle has not been driven for
function may not operate properly:
a certain amount of time after the hybrid
• When scenery behind the wall is visible,
system was started
such as a glass door, grid fence, etc.
• While turning left/right or a few seconds
• When the wall is slanted or low
after turning left/right
• When the wall is narrow, such as a pole,
• While driving around a curve and a few
etc.
seconds after driving around a curve
• When the wall is made of plants, such as a
• When turning left/right and an oncoming
hedge, etc.
vehicle is driving in a lane 3 or more lanes
• When the road, etc. is reflected on the
from the vehicle
wall
• When turning left/right and the direction
• When the vehicle is approaching the wall
of the vehicle differs greatly from the
at an angle
direction traffic flows in the oncoming
lane
Changing the pre-collision set-
ting
 The pre-collision system can be
enabled/disabled through a cus-
tomize setting. (P.563)
The system is enabled each time the power
• When turning left/right, a pedestrian or
switch is turned to ON.
bicycle behind the vehicle comes in front
 When the system is disabled, the
of it as if it overtakes the vehicle
PCS warning light will illuminate
and a message will be displayed on
the multi-information display.
 The pre-collision setting can be
changed on the customize settings.
(P.563)
4-5. Using the driving support systems253 Vehicles without active steeringLTA (Lane Tracing Assist)function: When the pre-collisionwarning timing is changed, theLTA functionsemergency steering assist timingwill also be changed. When driving on a road with clearlane lines with the dynamic radarWhen later is selected, the emergencycruise control operating, lane linessteering assist will not operate in mostand preceding and are detected using the front Vehicles with active steering func-camera and radar sensor, and thetion: When the pre-collision warn-steering wheel is operated to main-ing timing is changed, thetain the vehicle’s lane steering assist (exclud-Use this function only on highways anding the active steering function) will also be the dynamic radar cruise control is notWhen later is selected, the emergency4operating, the function will not assist (excluding the activeIn situations where the lane lines are diffi-steering function) will not operate inDrivingcult to see or are not visible, such as whenmost a traffic jam, support will be provided When the system determines thatusing the path of preceding and surround-the driver is not facing forward, theing -collision warning and emer-If the system determines that the steeringgency steering assist will operate atwheel has not been operated for a certainthe earlier timing, regardless of theamount of time or the steering wheel is notbeing firmly gripped, the driver will beuser and this function will be temporarily When the dynamic radar is operating, the pre-colli-If the steering wheel is firmly gripped, thesion warning will operate at the ear-function will begin operating timing, regardless of the usersetting.
4-5. Using the driving support systems
253
 Vehicles without active steering
LTA (Lane Tracing Assist)
function: When the pre-collision
warning timing is changed, the
LTA functions
emergency steering assist timing
will also be changed.
 When driving on a road with clear
lane lines with the dynamic radar
When later is selected, the emergency
cruise control operating, lane lines
steering assist will not operate in most
and preceding and surrounding
cases.
vehicles are detected using the front
 Vehicles with active steering func-
camera and radar sensor, and the
tion: When the pre-collision warn-
steering wheel is operated to main-
ing timing is changed, the
tain the vehicle’s lane position.
emergency steering assist (exclud-
Use this function only on highways and
ing the active steering function) tim-
expressways.
ing will also be changed.
If the dynamic radar cruise control is not
When later is selected, the emergency
4
operating, the function will not operate.
steering assist (excluding the active
In situations where the lane lines are diffi-
steering function) will not operate in
Driving
cult to see or are not visible, such as when
most cases.
in a traffic jam, support will be provided
 When the system determines that
using the path of preceding and surround-
the driver is not facing forward, the
ing vehicles.
pre-collision warning and emer-
If the system determines that the steering
gency steering assist will operate at
wheel has not been operated for a certain
the earlier timing, regardless of the
amount of time or the steering wheel is not
being firmly gripped, the driver will be
user setting.
alerted and this function will be temporarily
 When the dynamic radar cruise
canceled.
control is operating, the pre-colli-
If the steering wheel is firmly gripped, the
sion warning will operate at the ear-
function will begin operating again.
lier timing, regardless of the user
setting.
2544-5. Using the driving support systems When the function is operating, ifWARNINGthe vehicle is likely to depart from its■ Before using the LTA systemlane, the driver will be alerted via a● Do not overly rely on the LTA and LTA system is not a system whichprovides automated assistance in driv-When the buzzer sounds, check the areaing and it is not a system whicharound the vehicle and carefully operatereduces the amount of attention nec-the steering wheel to move the vehicleessary for safe driving. The driver isback to the center of the responsible for paying attentionto their surroundings and operatingthe steering wheel as necessary toensure safety. Also, the driver isresponsible for taking adequatebreaks when fatigued, such as whendriving for a long time.● Failure to perform appropriate drivingoperations and pay careful attentionmay lead to an accident.● When not using the LTA system, turn itoff using the LTA switch.■ Operating conditions of functionThis function is operable when all of the fol-lowing conditions are met:● The LTA system detects lane lines or the
254
4-5. Using the driving support systems
 When the function is operating, if
WARNING
the vehicle is likely to depart from its
■ Before using the LTA system
lane, the driver will be alerted via a
● Do not overly rely on the LTA system.
display and buzzer.
The LTA system is not a system which
provides automated assistance in driv-
When the buzzer sounds, check the area
ing and it is not a system which
around the vehicle and carefully operate
reduces the amount of attention nec-
the steering wheel to move the vehicle
essary for safe driving. The driver is
back to the center of the lane.
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
● When not using the LTA system, turn it
off using the LTA switch.
■ Operating conditions of function
This function is operable when all of the fol-
lowing conditions are met:
● The LTA system detects lane lines or the
4-5. Using the driving support systems255path of preceding or surrounding vehi-■ Hands off steering wheel warning ● The dynamic radar cruise control is oper-● When the system determines the driver holding the steering wheel, a mes-sage urging the driver to grip the steering● The lane width is approximately 3 to 4 mwheel and the icon shown in the illustra-(10 to 13 ft.).tion will be displayed on the multi-infor-● The turn signal lever is not being oper-mation display to warn the driver. If detects that the steering wheel isheld, the warning will be canceled. When● The vehicle is not being driven around ausing the system, make sure to grip thesharp wheel firmly, regardless of● The vehicle is not accelerating or decel-whether the warning is operating or more than a certain amount.● The steering wheel is not being turnedwith a large force.● The hands off steering wheel warning(P.255) is not operating.● The vehicle is being driven in the centerof a lane.4■ Temporary cancelation of functions● If no operations are detected for a certain● When the operating conditions are noDrivingamount of time, the warning will operatelonger met, a function may be temporar-and the function will be temporarily can-ily canceled. However, when the opera-celed. This warning may also operate iftion conditions are met again, operationthe driver only operates steering wheel aof the function will automatically besmall amount . (P.254)● If the operating conditions of a function■ Situations in which the hands off steer-are no longer met while the function ising wheel warning may not operateoperating, a buzzer may sound to indi-properlycate that the function has been temporar-● Depending on the condition of the vehi-ily , handle control condition and road● The steering assist operation of the func-surface, the warning function may nottion can be overridden by the operation of
4-5. Using the driving support systems
255
path of preceding or surrounding vehi-
■ Hands off steering wheel warning oper-
cles.
ation
● The dynamic radar cruise control is oper-
● When the system determines the driver is
ating.
not holding the steering wheel, a mes-
sage urging the driver to grip the steering
● The lane width is approximately 3 to 4 m
wheel and the icon shown in the illustra-
(10 to 13 ft.).
tion will be displayed on the multi-infor-
● The turn signal lever is not being oper-
mation display to warn the driver. If the
ated.
system detects that the steering wheel is
held, the warning will be canceled. When
● The vehicle is not being driven around a
using the system, make sure to grip the
sharp curve.
steering wheel firmly, regardless of
● The vehicle is not accelerating or decel-
whether the warning is operating or not.
erating more than a certain amount.
● The steering wheel is not being turned
with a large force.
● The hands off steering wheel warning
(P.255) is not operating.
● The vehicle is being driven in the center
of a lane.
4
■ Temporary cancelation of functions
● If no operations are detected for a certain
● When the operating conditions are no
Driving
amount of time, the warning will operate
longer met, a function may be temporar-
and the function will be temporarily can-
ily canceled. However, when the opera-
celed. This warning may also operate if
tion conditions are met again, operation
the driver only operates steering wheel a
of the function will automatically be
small amount continuously.
restored. (P.254)
● If the operating conditions of a function
■ Situations in which the hands off steer-
are no longer met while the function is
ing wheel warning may not operate
operating, a buzzer may sound to indi-
properly
cate that the function has been temporar-
● Depending on the condition of the vehi-
ily canceled.
cle, handle control condition and road
● The steering assist operation of the func-
surface, the warning function may not
tion can be overridden by the steering
operate.
wheel operation of the driver.
● Vehicles with LCA: In the following situa-
tions, the system may not be able to
■ Lane departure warning function when
detect when the driver’s hands are off the
the LTA is operating
steering wheel.
● Even if the LDA warning method is
• When a steering wheel cover is installed
changed to vibration of the steering
• When the driver is wearing gloves
wheel, if the vehicle deviates from the
• When foreign matter is attached to the
lane while the LTA is operating, the warn-
steering wheel
ing buzzer will sound to alert the driver.
• When the driver is gripping the wood
● If steering wheel operation equivalent to
trim, seam of the leather, spokes, or other
that necessary for a lane change is
part of the steering wheel that does not
detected, the system will determine the
have sensors
vehicle is not deviating from the lane and
● Vehicles with LCA: In the following situa-
the warning will not operate.
tions, the hands off steering wheel warn-
ing may not operate and the LTA
2564-5. Using the driving support systemsfunction may continue operating evenWARNINGthough the driver’s hands are off thesteering wheel:■ Situations in which the functions may• When something other than a hand isnot operate properlycontacting the steering wheelIn the following situations, the functions• When a wide object or arms are heldmay not operate properly and the vehi-across the steering wheelcle may depart from its lane. Do notoverly rely on these functions. The driverEnabling/disabling the systemis solely responsible for paying attentionto their surroundings and operating thesteering wheel as necessary to ensureThe LTA will change each time the LTA switch is● When a preceding or changes lanes (Your vehicleWhen the LTA is ON, the LTA indicatormay follow the preceding or surround-ing vehicle and also change lanes)will illuminate. Vehicles without a head-up display● When a preceding or surroundingvehicle is swaying (Your vehicle maysway accordingly and depart from thelane) Vehicles with a head-up display● When a preceding or surroundingvehicle departs from a lane (Yourvehicle may follow the preceding orsurrounding vehicle and also departfrom the lane)● When a preceding or surroundingvehicle is being driven extremely closeto the left/right lane line (Your vehiclemay follow the preceding or surround-ing vehicle accordingly and departfrom the lane)● When there are moving objects orstructures in the surrounding area(Depending on the position of themoving object or structure relative toyour vehicle, your vehicle may sway)
256
4-5. Using the driving support systems
function may continue operating even
WARNING
though the driver’s hands are off the
steering wheel:
■ Situations in which the functions may
• When something other than a hand is
not operate properly
contacting the steering wheel
In the following situations, the functions
• When a wide object or arms are held
may not operate properly and the vehi-
across the steering wheel
cle may depart from its lane. Do not
overly rely on these functions. The driver
Enabling/disabling the system
is solely responsible for paying attention
to their surroundings and operating the
steering wheel as necessary to ensure
The LTA will change between
safety.
ON/OFF each time the LTA switch is
● When a preceding or surrounding
pressed.
vehicle changes lanes (Your vehicle
When the LTA is ON, the LTA indicator
may follow the preceding or surround-
ing vehicle and also change lanes)
will illuminate.
 Vehicles without a head-up display
● When a preceding or surrounding
vehicle is swaying (Your vehicle may
sway accordingly and depart from the
lane)
 Vehicles with a head-up display
● When a preceding or surrounding
vehicle departs from a lane (Your
vehicle may follow the preceding or
surrounding vehicle and also depart
from the lane)
● When a preceding or surrounding
vehicle is being driven extremely close
to the left/right lane line (Your vehicle
may follow the preceding or surround-
ing vehicle accordingly and depart
from the lane)
● When there are moving objects or
structures in the surrounding area
(Depending on the position of the
moving object or structure relative to
your vehicle, your vehicle may sway)
4-5. Using the driving support systems257WARNING● When the vehicle is struck by a cross-wind or the turbulence of other nearbyvehicles● Situations in which the sensors may notoperate properly: P.238● Situations in which the lane may not bedetected: P.239● When it is necessary to disable the sys-tem: P.233Operation display of steering wheel operation supportThe operating state of the LTA system is displaySteering iconSituation4DrivingLTA is on standbyWhiteGray/WhiteGrayLTA is operatingGreenGreenGreenThe vehicle is depart-ing the lane towardthe side which theYellowYellowlane display is flash-GreenFlashingFlashinging
4-5. Using the driving support systems
257
WARNING
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the sensors may not
operate properly: P.238
● Situations in which the lane may not be
detected: P.239
● When it is necessary to disable the sys-
tem: P.233
Operation display of steering wheel operation support
The operating state of the LTA system is indicated.
Indicator
Lane display
Steering icon
Situation
4
Driving
LTA is on standby
White
Gray/White
Gray
LTA is operating
Green
Green
Green
The vehicle is depart-
ing the lane toward
the side which the
Yellow
Yellow
lane display is flash-
Green
Flashing
Flashing
ing
2584-5. Using the driving support systemsLCA (Lane Change Assist) *WARNING■ Before using the LCA system* : If equipped● Do not overly rely on the LCA LCA system is not a system whichLCA functionsprovides automated assistance in drivingand it is not a system which reduces theThis function is linked to the LTA andneed for checking an adjacent lane forprovides assistance in performing laneother vehicles, approaching vehicles, changing lanes. The driver is solelychanges through steering wheel oper-responsible for paying attention to and operating the steeringUse this function only on highways andwheel as necessary to ensure , do not use the LCA to changeThe steering assist operation can be over-lanes into which a lane change shouldridden by the steering wheel operation ofnot be performed (oncoming lanes, roadthe , etc.).The lane change assist function is not● Failure to perform appropriate drivingdesigned to operate when changing lanesoperations and pay careful attentionat a lead to an accident.■ Operating conditions of functionThis function is operable when all of the fol-lowing conditions are met:● The LTA is operating.● The lane change assist function isenabled by a customize setting.● The vehicle speed is between approxi-mately 80 and 140 km/h (50 and 85mph).● The system recognizes the current roadas a highway or expressway.● The system detects a broken white lineon the side which the lane change is to beperformed.● A vehicle is not detected in the lanetoward which the turn signal is operated.● The navigation system map data is cor-rect.● The steering wheel is not being turnedwith a large force.● The hands off steering wheel warning(P.255) is not operating.
258
4-5. Using the driving support systems
LCA (Lane Change Assist) *
WARNING
■ Before using the LCA system
* : If equipped
● Do not overly rely on the LCA system.
The LCA system is not a system which
LCA functions
provides automated assistance in driving
and it is not a system which reduces the
This function is linked to the LTA and
need for checking an adjacent lane for
provides assistance in performing lane
other vehicles, approaching vehicles, etc.
when changing lanes. The driver is solely
changes through steering wheel oper-
responsible for paying attention to their
ations.
surroundings and operating the steering
Use this function only on highways and
wheel as necessary to ensure safety.
expressways.
Also, do not use the LCA to change
The steering assist operation can be over-
lanes into which a lane change should
ridden by the steering wheel operation of
not be performed (oncoming lanes, road
the driver.
shoulders, etc.).
The lane change assist function is not
● Failure to perform appropriate driving
designed to operate when changing lanes
operations and pay careful attention
at a junction.
may lead to an accident.
■ Operating conditions of function
This function is operable when all of the fol-
lowing conditions are met:
● The LTA is operating.
● The lane change assist function is
enabled by a customize setting.
● The vehicle speed is between approxi-
mately 80 and 140 km/h (50 and 85
mph).
● The system recognizes the current road
as a highway or expressway.
● The system detects a broken white line
on the side which the lane change is to be
performed.
● A vehicle is not detected in the lane
toward which the turn signal is operated.
● The navigation system map data is cor-
rect.
● The steering wheel is not being turned
with a large force.
● The hands off steering wheel warning
(P.255) is not operating.
4-5. Using the driving support systems259● The system has detected a moving objectbehind the vehicle at least once since thehybrid system was started.■ Cancelation of functionsIn the following situations, LCA operationmay be canceled during operation, whilenotifying the driver with the display and abuzzer:■ Situations in which the hands off steer-● When the operating conditionsing wheel warning may not operate(P.258) are no longer metproperly● When the system can no longer detect● Depending on the condition of the vehi-lane linescle, handle control condition and road● When the turn signal lever is operated tosurface, the warning function may notthe second position (P.259)operate.● When the turn signal lever is operated in● In the following situations, the system maythe opposite direction of the lane changenot be able to detect when the driver’s● When the system detects operation ofhands are off the steering steering wheel, brake pedal or accel-• When a steering wheel cover is installed4erator pedal by the driver• When the driver is wearing gloves• When foreign matter is attached to the● The hands off steering wheel warningsteering wheelDriving(P.259) is operating.• When the driver is gripping the woodIf the system detects that a vehicle is quicklytrim, seam of the leather, spokes, or otherapproaching in the lane toward which thepart of the steering wheel that does nothave sensorsturn signal is operated a buzzer will soundand a message will be displayed to alert the● In the following situations, the hands offsteering wheel warning may not operatedriver. At the same time the steering wheeland the LCA function may continuemay be slightly operated to help keep theoperating even though the driver’s handsvehicle away from the approaching off the steering wheel:• When something other than a hand is■ Hands off steering wheel warning oper-contacting the steering wheelation• When a wide object or arms are heldWhen the system determines the driver isac
4-5. Using the driving support systems
259
● The system has detected a moving object
behind the vehicle at least once since the
hybrid system was started.
■ Cancelation of functions
In the following situations, LCA operation
may be canceled during operation, while
notifying the driver with the display and a
buzzer:
■ Situations in which the hands off steer-
● When the operating conditions
ing wheel warning may not operate
(P.258) are no longer met
properly
● When the system can no longer detect
● Depending on the condition of the vehi-
lane lines
cle, handle control condition and road
● When the turn signal lever is operated to
surface, the warning function may not
the second position (P.259)
operate.
● When the turn signal lever is operated in
● In the following situations, the system may
the opposite direction of the lane change
not be able to detect when the driver’s
● When the system detects operation of
hands are off the steering wheel.
the steering wheel, brake pedal or accel-
• When a steering wheel cover is installed
4
erator pedal by the driver
• When the driver is wearing gloves
• When foreign matter is attached to the
● The hands off steering wheel warning
steering wheel
Driving
(P.259) is operating.
• When the driver is gripping the wood
If the system detects that a vehicle is quickly
trim, seam of the leather, spokes, or other
approaching in the lane toward which the
part of the steering wheel that does not
have sensors
turn signal is operated a buzzer will sound
and a message will be displayed to alert the
● In the following situations, the hands off
steering wheel warning may not operate
driver. At the same time the steering wheel
and the LCA function may continue
may be slightly operated to help keep the
operating even though the driver’s hands
vehicle away from the approaching vehicle.
are off the steering wheel:
• When something other than a hand is
■ Hands off steering wheel warning oper-
contacting the steering wheel
ation
• When a wide object or arms are held
When the system determines the driver is
across the steering wheel
not holding the steering wheel, a message
urging the driver to grip the steering wheel
and the icon shown in the illustration will be
Operating the LCA
displayed on the multi-information display
to warn the driver. If the system detects that
If the turn signal lever is held in the first
the steering wheel is held, the warning will
position, the lane change direction will
be canceled. When using the system, make
sure to grip the steering wheel firmly,
be displayed and the function will oper-
regardless of whether the warning is oper-
ate.
ating or not.
To change lanes by holding the turn
signal lever in the first position without
using the LCA, turn the customize set-
ting of the LCA off.
2604-5. Using the driving support systems2 Second position: LCA is not opera-tionalWARNING■ Situations in which the LCA shouldnot be used● When driving on a one lane road● When there is no broken white linebetween the current lane and the laneto be changed toEnabling/disabling the systemLCA can be enabled/disabled through1 First position: LCA is operationala customize setting. (P.564)Displays and system operationThe operating state of the LCA system is displaySteering iconConditionLCA on standbyGray arrow and green lineGreenLCA is operatingBlue arrow and white lineApproaching vehicledetected while LCA is oper-atingGrayLane line no longer detectedNot displayedwhile LCA is operatingGray
260
4-5. Using the driving support systems
2 Second position: LCA is not opera-
tional
WARNING
■ Situations in which the LCA should
not be used
● When driving on a one lane road
● When there is no broken white line
between the current lane and the lane
to be changed to
Enabling/disabling the system
LCA can be enabled/disabled through
1 First position: LCA is operational
a customize setting. (P.564)
Displays and system operation
The operating state of the LCA system is indicated.
LCA display
Steering icon
Condition
LCA on standby
Gray arrow and green line
Green
LCA is operating
Blue arrow and white line
Approaching vehicle
detected while LCA is oper-
ating
Gray
Lane line no longer detected
Not displayed
while LCA is operating
Gray
4-5. Using the driving support systems261LDA (Lane Departure Alert)Basic functionsThe LDA system warns the driver if thevehicle may deviate from the currentlane or course * , and also can slightlyoperate the steering wheel to helpavoid deviation from the lane orcourse * .The front camera is used to detect lanelines or a course * .*: Boundary between the asphalt andgrass, soil, etc., or structures, such as a4curb, guardrail, etc.■ Lane departure alert function■ Lane departure prevention func-DrivingtionWhen the system determines that thevehicle might depart from its lane orIf the system determines that the vehi-*cle is likely to depart from its lane orcourse , a warning is displayed on acourse * , it provides assistance throughdisplay, and either a warning buzzerwill sound or the steering wheel willsteering wheel operations to helpvibrate to alert the deviation from the lane the area around your vehicle andcarefully operate the steering wheel toIf the system determines that the steeringmove the vehicle back to the center of thewheel has not been operated for a certainlane or course * .amount of time or the steering wheel is notbeing firmly gripped, a warning messageIf the system determines that the vehiclemay be displayed and a warning buzzermay collide with a vehicle in an adjacentmay sound to alert the , the lane departure alert will operateeven if the turn signals are with BSM: If the system deter-mines that the vehicle may collide with a*: Boundary between the asphalt andvehicle in an adjacent lane, the lane depar-grass, soil, etc., or structures, such as ature prevention function will operate evencurb, guardrail, the turn signals are operating.* : Boundary between the asphalt andgrass, soil, etc., or structures, such as acurb, guardrail, etc.
4-5. Using the driving support systems
261
LDA (Lane Departure Alert)
Basic functions
The LDA system warns the driver if the
vehicle may deviate from the current
lane or course * , and also can slightly
operate the steering wheel to help
avoid deviation from the lane or
course * .
The front camera is used to detect lane
lines or a course * .
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
4
curb, guardrail, etc.
■ Lane departure alert function
■ Lane departure prevention func-
Driving
tion
When the system determines that the
vehicle might depart from its lane or
If the system determines that the vehi-
*
cle is likely to depart from its lane or
course , a warning is displayed on a
course * , it provides assistance through
display, and either a warning buzzer
will sound or the steering wheel will
steering wheel operations to help
vibrate to alert the driver.
avoid deviation from the lane or
course.
Check the area around your vehicle and
carefully operate the steering wheel to
If the system determines that the steering
move the vehicle back to the center of the
wheel has not been operated for a certain
lane or course * .
amount of time or the steering wheel is not
being firmly gripped, a warning message
If the system determines that the vehicle
may be displayed and a warning buzzer
may collide with a vehicle in an adjacent
may sound to alert the driver.
lane, the lane departure alert will operate
even if the turn signals are operating.
Vehicles with BSM: If the system deter-
mines that the vehicle may collide with a
*
: Boundary between the asphalt and
vehicle in an adjacent lane, the lane depar-
grass, soil, etc., or structures, such as a
ture prevention function will operate even
curb, guardrail, etc.
if the turn signals are operating.
* : Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
2624-5. Using the driving support systemsWARNING■ Before using the LDA system● Do not overly rely on the LDA LDA system is not a system whichprovides automated assistance in driv-ing and it is not a system whichreduces the amount of attention nec-essary for safe driving. The driver issolely responsible for paying attentionto their surroundings and operatingthe steering wheel as necessary toensure safety. Also, the driver isresponsible for taking adequatebreaks when fatigued, such as whendriving for a long time.● Failure to perform appropriate drivingoperations and pay careful attentionmay lead to an accident.■ Break suggestion function■ Operating conditions of each function● Lane departure alert/prevention functionIf the vehicle is swaying, a message willThis function is operable when all of the fol-be displayed and a buzzer will sound tolowing conditions are met:urge the driver to take a break.• The vehicle speed is approximately 50km/h (30 mph) or may be possible when the vehi-cle speed is approximately 40 km/h (25mph) or more if vehicles, motorcycles, bicy-cles, or pedestrians are detected near thelane.• The system recognizes a lane or course * .(When recognized on only one side, thesystem will operate only for the recog-nized side.)• The lane width is approximately 3 m (9.8ft.) or more.• The turn signal lever is not being oper-ated.(Vehicles with BSM: Except when a vehicleis detected in the direction that the turn sig-nal lever is operated.)• The vehicle is not being driven around asharp curve.• The vehicle is not accelerating or decel-erating more than a certain amount.
262
4-5. Using the driving support systems
WARNING
■ Before using the LDA system
● Do not overly rely on the LDA system.
The LDA system is not a system which
provides automated assistance in driv-
ing and it is not a system which
reduces the amount of attention nec-
essary for safe driving. The driver is
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
■ Break suggestion function
■ Operating conditions of each function
● Lane departure alert/prevention function
If the vehicle is swaying, a message will
This function is operable when all of the fol-
be displayed and a buzzer will sound to
lowing conditions are met:
urge the driver to take a break.
• The vehicle speed is approximately 50
km/h (30 mph) or more.
Operation may be possible when the vehi-
cle speed is approximately 40 km/h (25
mph) or more if vehicles, motorcycles, bicy-
cles, or pedestrians are detected near the
lane.
• The system recognizes a lane or course * .
(When recognized on only one side, the
system will operate only for the recog-
nized side.)
• The lane width is approximately 3 m (9.8
ft.) or more.
• The turn signal lever is not being oper-
ated.
(Vehicles with BSM: Except when a vehicle
is detected in the direction that the turn sig-
nal lever is operated.)
• The vehicle is not being driven around a
sharp curve.
• The vehicle is not accelerating or decel-
erating more than a certain amount.
4-5. Using the driving support systems263• The steering wheel is not being turnedsoil, etc., or structures, such as a curb,sufficiently to perform a lane , etc.• When the VSC or TRC system is not■ Hands off steering wheel warning oper-turned offation* : Boundary between the asphalt and grass,In the following situations, a message urgingsoil, etc., or structures, such as a curb,the driver to operate the steering wheel andguardrail, icon will be displayed and a buzzer willsound to warn the driver. When using the■ Temporary cancellation of functionssystem, make sure to grip the steeringWhen the operating conditions are no lon-wheel firmly, regardless of whether theger met, a function may be temporarily can-warning is operating or . However, when the operationconditions are met again, operation of thefunction will automatically be restored.(P.262)■ Operation of the lane departure alertfunction/lane departure preventionfunction● Depending on the vehicle speed, road4conditions, lane departure angle, etc.,operation of the lane departure preven-● When the system determines that thetion function may not be felt or the func-driver is not securely holding the steeringDrivingtion may not , or the steering wheel is not beingoperated when the steering assist opera-● Depending on the conditions, the warn-tion of the lane departure preventioning buzzer may operate even if vibrationfunction is operatingis selected through a customize length of time that the warning buzzer● If a course * is not clear or straight, theoperates will become longer as the fre-lane departure alert function or lanequency of the steering assist operatingdeparture prevention function may . Even if the system judges that thesteering wheel has been operated, the● The lane departure alert function or lanedeparture prevention function may notwarning buzzer will sound for a certainoperate if the system judges that the vehi-amount of time
4-5. Using the driving support systems
263
• The steering wheel is not being turned
soil, etc., or structures, such as a curb,
sufficiently to perform a lane change.
guardrail, etc.
• When the VSC or TRC system is not
■ Hands off steering wheel warning oper-
turned off
ation
* : Boundary between the asphalt and grass,
In the following situations, a message urging
soil, etc., or structures, such as a curb,
the driver to operate the steering wheel and
guardrail, etc.
an icon will be displayed and a buzzer will
sound to warn the driver. When using the
■ Temporary cancellation of functions
system, make sure to grip the steering
When the operating conditions are no lon-
wheel firmly, regardless of whether the
ger met, a function may be temporarily can-
warning is operating or not.
celed. However, when the operation
conditions are met again, operation of the
function will automatically be restored.
(P.262)
■ Operation of the lane departure alert
function/lane departure prevention
function
● Depending on the vehicle speed, road
4
conditions, lane departure angle, etc.,
operation of the lane departure preven-
● When the system determines that the
tion function may not be felt or the func-
driver is not securely holding the steering
Driving
tion may not operate.
wheel, or the steering wheel is not being
operated when the steering assist opera-
● Depending on the conditions, the warn-
tion of the lane departure prevention
ing buzzer may operate even if vibration
function is operating
is selected through a customize setting.
The length of time that the warning buzzer
● If a course * is not clear or straight, the
operates will become longer as the fre-
lane departure alert function or lane
quency of the steering assist operating
departure prevention function may not
operate.
increases. Even if the system judges that the
steering wheel has been operated, the
● The lane departure alert function or lane
departure prevention function may not
warning buzzer will sound for a certain
operate if the system judges that the vehi-
amount of time.
cle is intentionally being steered to avoid
■ Break suggestion function
a pedestrian or parked vehicle.
● Vehicles with BSM: It may not be possi-
This function is operable when all of the fol-
lowing conditions are met:
ble for the system to judge if there is dan-
ger of a collision with a vehicle in an
● The vehicle speed is approximately
adjacent lane.
65km/h (40mph) or more.
● Depending on the driver condition, the
● The lane width is approximately 3 m (9.8
lane departure alert function or lane
ft.) or more.
departure prevention function changes
Depending on the condition of the vehicle
the timing of operation.
and road surface, the break suggestion
● The steering assist operation of the lane
function may not operate.
departure prevention function can be
overridden by the steering wheel opera-
tion of the driver.
*
: Boundary between the asphalt and grass,
2644-5. Using the driving support systemscustomized setting. Also, this settingwill be kept until the power switch isturned ■ Situations in which the system maynot operate properlyIn the following situations, the systemVehicles without a head-up display: Pressmay not operate properly and the vehi-themeter control switch to turn off thecle may depart from its lane. Do notoverly rely on these functions. The solely responsible for paying attentionVehicles with a head-up display: Press theto their surroundings and operating thesteering wheel as necessary to ensuresteering switch to turn off the pressed, the message● When the boundary between theof the break suggestion function will remainasphalt and grass, soil, etc., or struc-tures, such as a curb, guardrail, etc. clear or straight● When the vehicle is struck by a cross-Changing LDA settingswind or the turbulence of other nearbyvehicles The LDA system can beenabled/disabled through a cus-● Situations in which the lane may not bedetected: P.239tomize setting. (P.564)● Situations in which the sensors may not The settings of the LDA can beoperate properly: P.238changed on the customize settings.● Situations in which some or all of the(P.564)functions of the system cannot oper-ate: P.239 When the system determines thatthe driver is tired, the lane departure● When it is necessary to disable the sys-tem: P.233warning function will operate at the“Earlier” timing, regardless of theDisplays and system operationThe operating state of the lane departure alert function and steering assist opera-tion of the lane departure prevention function are indicated.
264
4-5. Using the driving support systems
customized setting. Also, this setting
will be kept until the power switch is
turned off.
WARNING
■ Situations in which the system may
not operate properly
In the following situations, the system
Vehicles without a head-up display: Press
may not operate properly and the vehi-
the
meter control switch to turn off the
cle may depart from its lane. Do not
overly rely on these functions. The driver
message.
is solely responsible for paying attention
Vehicles with a head-up display: Press the
to their surroundings and operating the
steering wheel as necessary to ensure
steering switch to turn off the message.
safety.
Unless
or
is pressed, the message
● When the boundary between the
of the break suggestion function will remain
asphalt and grass, soil, etc., or struc-
tures, such as a curb, guardrail, etc. is
displayed.
not clear or straight
● When the vehicle is struck by a cross-
Changing LDA settings
wind or the turbulence of other nearby
vehicles
 The LDA system can be
enabled/disabled through a cus-
● Situations in which the lane may not be
detected: P.239
tomize setting. (P.564)
● Situations in which the sensors may not
 The settings of the LDA can be
operate properly: P.238
changed on the customize settings.
● Situations in which some or all of the
(P.564)
functions of the system cannot oper-
ate: P.239
 When the system determines that
the driver is tired, the lane departure
● When it is necessary to disable the sys-
tem: P.233
warning function will operate at the
“Earlier” timing, regardless of the
Displays and system operation
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
4-5. Using the driving support systems265IndicatorLane displaySteering iconSituationNot illuminated Not illuminated System disabledYellowIlluminatedLane lines are not detected by theNot illuminatedNot illuminatedsystemGrayLane lines are detected by the sys-Not illuminatedNot illuminatedtemWhiteLane departure alert function isNot illuminated operating for the side which the laneYellowYellowdisplay is flashingFlashingFlashing4Lane departure prevention functionis operating for the side which theDrivinglane display is illuminatedGreenGreenGreenLane departure alert function/lanedeparture prevention function isoperating for the side which the laneYellowYellowGreendisplay is flashingFlashingFlashing
4-5. Using the driving support systems
265
Indicator
Lane display
Steering icon
Situation
Not illuminated Not illuminated System disabled
Yellow
Illuminated
Lane lines are not detected by the
Not illuminated
Not illuminated
system
Gray
Lane lines are detected by the sys-
Not illuminated
Not illuminated
tem
White
Lane departure alert function is
Not illuminated operating for the side which the lane
Yellow
Yellow
display is flashing
Flashing
Flashing
4
Lane departure prevention function
is operating for the side which the
Driving
lane display is illuminated
Green
Green
Green
Lane departure alert function/lane
departure prevention function is
operating for the side which the lane
Yellow
Yellow
Green
display is flashing
Flashing
Flashing
2664-5. Using the driving support systemsPDA (Proactive driving● The proactive driving assist is not asystem which reduces the amount ofassist)attention necessary for safe if the system is operating cor-rectly, the surrounding conditions asWhen a detectable objectrecognized by the driver and detected(P.266) is detected, the proac-by the system may differ. It is neces-sary for the driver to pay attention,tive driving assist operates theassess risks, and ensure safety. Over-brakes and steering wheel to helpreliance on this system to drive theprevent the vehicle from approach-vehicle safely may lead to an accidentresulting in death or serious too close to the object.● Proactive driving assist is not a systemWARNINGwhich allows for inattentive driving andis not a system which assists in poor■ For safe usevisibility conditions. The driver is solelyDriving safely is solely the responsibilityresponsible for paying attention toof the surroundings and driving safely.● The proactive driving assist is■ When turning proactive driving assistdesigned to provide some assistanceofffor regular braking and steering oper-● Situations in which the sensors may notations, as well as helping to prevent theoperate properly: P.238vehicle from approaching too close toa detectable object. However, the● When it is necessary to disable the sys-scope of this assistance is : P.233The driver should perform brake andsteering operations as necessary. Readthe following items carefully. Do notoverly rely on the proactive driving assistand always drive carefully. (P.268)System operating conditions and detectable objectsAccording to the driving conditions, the operation and detectable objects of theproactive driving assist will change as follows.
266
4-5. Using the driving support systems
PDA (Proactive driving
● The proactive driving assist is not a
system which reduces the amount of
assist)
attention necessary for safe driving.
Even if the system is operating cor-
rectly, the surrounding conditions as
When a detectable object
recognized by the driver and detected
(P.266) is detected, the proac-
by the system may differ. It is neces-
sary for the driver to pay attention,
tive driving assist operates the
assess risks, and ensure safety. Over-
brakes and steering wheel to help
reliance on this system to drive the
prevent the vehicle from approach-
vehicle safely may lead to an accident
resulting in death or serious injury.
ing too close to the object.
● Proactive driving assist is not a system
WARNING
which allows for inattentive driving and
is not a system which assists in poor
■ For safe use
visibility conditions. The driver is solely
Driving safely is solely the responsibility
responsible for paying attention to
of the driver.
their surroundings and driving safely.
● The proactive driving assist is
■ When turning proactive driving assist
designed to provide some assistance
off
for regular braking and steering oper-
● Situations in which the sensors may not
ations, as well as helping to prevent the
operate properly: P.238
vehicle from approaching too close to
a detectable object. However, the
● When it is necessary to disable the sys-
scope of this assistance is limited.
tem: P.233
The driver should perform brake and
steering operations as necessary. Read
the following items carefully. Do not
overly rely on the proactive driving assist
and always drive carefully. (P.268)
System operating conditions and detectable objects
According to the driving conditions, the operation and detectable objects of the
proactive driving assist will change as follows.
4-5. Using the driving support systems267FunctionConditionsOperationDetectable objectsAssistance with someA detectable object brake operations is Pedestriansis detected crossing provided in order to Bicycliststhe roadreduce the possibilityof a with somebrake and steeringwheel operations areprovided accordingto the surroundingObstacle Anticipa-conditions to helption Assist (OAA)prevent the vehicleA detectable object from approaching  Pedestrianstoo close to a Bicyclistsis detected on thedetectedobject.  Parked vehiclesside of the road4Assistance withsteering wheel oper-Drivingations is providedwithin a range thatthe vehicle will notdeviate from its cur-rent lane.A preceding vehicle The vehicle is gentlyor an adjacent vehi- decelerated so that Preceding vehiclescle cutting in front of the vehicle-to-vehi- Motorcyclesthe vehicle iscle distance will notdetectedbe excessively AssistThe vehicle is gently(DA)decelerated if theA curve is detectedvehicle speed isNoneahead of the vehicle determined to be toohigh for the system antici-pates the driver’sSteering Assist (SA)Lane is detectedoperation and sup- Noneports the operation ofthe steering wheel.
4-5. Using the driving support systems
267
Function
Conditions
Operation
Detectable objects
Assistance with some
A detectable object brake operations is
 Pedestrians
is detected crossing provided in order to
 Bicyclists
the road
reduce the possibility
of a collision.
Assistance with some
brake and steering
wheel operations are
provided according
to the surrounding
Obstacle Anticipa-
conditions to help
tion Assist (OAA)
prevent the vehicle
A detectable object from approaching  Pedestrians
too close to a
 Bicyclists
is detected on the
detected
object.  Parked vehicles
side of the road
4
Assistance with
steering wheel oper-
Driving
ations is provided
within a range that
the vehicle will not
deviate from its cur-
rent lane.
A preceding vehicle The vehicle is gently
or an adjacent vehi- decelerated so that
 Preceding vehicles
cle cutting in front of the vehicle-to-vehi-
 Motorcycles
the vehicle is
cle distance will not
detected
be excessively short.
Deceleration Assist
The vehicle is gently
(DA)
decelerated if the
A curve is detected
vehicle speed is
None
ahead of the vehicle determined to be too
high for the curve
ahead.
The system antici-
pates the driver’s
Steering Assist (SA)
Lane is detected
operation and sup- None
ports the operation of
the steering wheel.
2684-5. Using the driving support systemsthe vehicle■ Vehicle speeds at which the system can• When lane lines can no longer beoperatedetected• When the brake pedal has been● Detectable object crossing the roaddepressedassistance• When the accelerator pedal has beenApproximately 30 to 60 km/h (20 to 35depressedmph)• When the steering wheel has been oper-ated with more than a certain amount of● Detectable object on the side of the roadforceassistance• When the turn signal lever is operated toApproximately 30 to 60 km/h (20 to 35the left/right turn positionmph)WARNING● Preceding vehicle deceleration assis-tance■ Situations in which the system mayApproximately 20 km/h (15 mph) or morenot operate properly● Curve deceleration assistance● Situations in which the lane may not bedetected: P.239Approximately 20 km/h (15 mph) or more● When a detectable object stops● Steering assist within a laneimmediately before entering the pathApproximately 10 to 140 km/h (5 to 80of the vehiclemph)● When passing extremely close to a■ System operation will be canceled whendetectable object behind a guardrail,fence, etc.● In the following situations, system opera-tion will be canceled:● When changing lanes while overtak-• When the dynamic radar cruise controling a detectable objector cruise control is operating• When the PCS is off● When passing a detectable object that• Situations in which some or all of theis changing lanes or turning left/rightfunctions of the system cannot operate:P.239● When there are objects (guardrails,• When the P, R or N shift position ispower poles, trees, walls, fences,selectedpoles, traffic cones, mailboxes, etc.) inthe surrounding area● In the following situations, the brakeoperation assist will be canceled:● When there are patterns or a painting• The vehicle speed is approximately 15ahead of the vehicle that may be mis-km/h (9 mph) or lesstaken for a detectable object• When a certain vehicle speed has beenreached, as judged by the system,● When passing through
268
4-5. Using the driving support systems
the vehicle
■ Vehicle speeds at which the system can
• When lane lines can no longer be
operate
detected
• When the brake pedal has been
● Detectable object crossing the road
depressed
assistance
• When the accelerator pedal has been
Approximately 30 to 60 km/h (20 to 35
depressed
mph)
• When the steering wheel has been oper-
ated with more than a certain amount of
● Detectable object on the side of the road
force
assistance
• When the turn signal lever is operated to
Approximately 30 to 60 km/h (20 to 35
the left/right turn position
mph)
WARNING
● Preceding vehicle deceleration assis-
tance
■ Situations in which the system may
Approximately 20 km/h (15 mph) or more
not operate properly
● Curve deceleration assistance
● Situations in which the lane may not be
detected: P.239
Approximately 20 km/h (15 mph) or more
● When a detectable object stops
● Steering assist within a lane
immediately before entering the path
Approximately 10 to 140 km/h (5 to 80
of the vehicle
mph)
● When passing extremely close to a
■ System operation will be canceled when
detectable object behind a guardrail,
fence, etc.
● In the following situations, system opera-
tion will be canceled:
● When changing lanes while overtak-
• When the dynamic radar cruise control
ing a detectable object
or cruise control is operating
• When the PCS is off
● When passing a detectable object that
• Situations in which some or all of the
is changing lanes or turning left/right
functions of the system cannot operate:
P.239
● When there are objects (guardrails,
• When the P, R or N shift position is
power poles, trees, walls, fences,
selected
poles, traffic cones, mailboxes, etc.) in
the surrounding area
● In the following situations, the brake
operation assist will be canceled:
● When there are patterns or a painting
• The vehicle speed is approximately 15
ahead of the vehicle that may be mis-
km/h (9 mph) or less
taken for a detectable object
• When a certain vehicle speed has been
reached, as judged by the system,
● When passing through a place with a
according to the surrounding conditions
low structure above the road (tunnel
● In the following situations, system opera-
with a low ceiling, traffic sign, sign-
tion may be canceled:
board, etc.)
• When the brake control or output
● When driving on snowy, icy, or rutted
restriction control of a driving support
roads
system operates (For example: PCS,
drive-start control)
● When a detectable object is
• When the system determines that a
approaching your vehicle
detected object has moved away from
4-5. Using the driving support systems269● When a pedestrian or bicyclist isWARNINGshorter than approximately 1 m (3.2 ft.)● When your vehicle or a detectableor taller than approximately 2 m (6.5object is wanderingft.)● When the movement of a detectable● When the silhouette of a pedestrian orobject changes (change in direction,bicyclist is unclear (such as when theysudden acceleration or deceleration,are wearing a raincoat, long skirt, etc.)etc.)● When a pedestrian or bicyclist is● When suddenly approaching a detect-bending forward or squattingable object● When a pedestrian or bicyclist is mov-● When a preceding vehicle or motor-ing at high speedcycle is not directly in front of yourvehicle● When a pedestrian is pushing astroller, wheelchair, bicycle or other● When there is a structure above avehicledetectable object● When a detectable object blends in● When part of a detectable object iswith the surrounding area, such ashidden by another object (large lug-when it is dim (at dawn or dusk) or4gage, umbrella, guardrail, etc.)dark (at night, in a tunnel, etc.)● When multiple detectable objects are● When the lane width is 4 m (13.1 ft.) orDrivingoverlappingmore● When a bright light, such as the sun or● When the lane width is 2.5 (8.2 ft.) mheadlights of another vehicle, isor lessreflecting off of the detectable object● When the vehicle has not been driven● When the detectable object is whitefor a certain amount of time after theand looks extremely brighthybrid system was started● When the color or brightness of the● While turning left or right or a few sec-detectable object causes it to blend inonds after turning left or rightwith its surroundings● While changing lanes or a few sec-● When a detectable object cuts in frontonds after changing lanesof or emerges from beside a vehicle● When entering a curve, driving around● When approaching a vehicle aheada curve and a few seconds after drivingwhich is perpendicular or at an anglearound a curveto the vehicle, or is facing t
4-5. Using the driving support systems
269
● When a pedestrian or bicyclist is
WARNING
shorter than approximately 1 m (3.2 ft.)
● When your vehicle or a detectable
or taller than approximately 2 m (6.5
object is wandering
ft.)
● When the movement of a detectable
● When the silhouette of a pedestrian or
object changes (change in direction,
bicyclist is unclear (such as when they
sudden acceleration or deceleration,
are wearing a raincoat, long skirt, etc.)
etc.)
● When a pedestrian or bicyclist is
● When suddenly approaching a detect-
bending forward or squatting
able object
● When a pedestrian or bicyclist is mov-
● When a preceding vehicle or motor-
ing at high speed
cycle is not directly in front of your
vehicle
● When a pedestrian is pushing a
stroller, wheelchair, bicycle or other
● When there is a structure above a
vehicle
detectable object
● When a detectable object blends in
● When part of a detectable object is
with the surrounding area, such as
hidden by another object (large lug-
when it is dim (at dawn or dusk) or
4
gage, umbrella, guardrail, etc.)
dark (at night, in a tunnel, etc.)
● When multiple detectable objects are
● When the lane width is 4 m (13.1 ft.) or
Driving
overlapping
more
● When a bright light, such as the sun or
● When the lane width is 2.5 (8.2 ft.) m
headlights of another vehicle, is
or less
reflecting off of the detectable object
● When the vehicle has not been driven
● When the detectable object is white
for a certain amount of time after the
and looks extremely bright
hybrid system was started
● When the color or brightness of the
● While turning left or right or a few sec-
detectable object causes it to blend in
onds after turning left or right
with its surroundings
● While changing lanes or a few sec-
● When a detectable object cuts in front
onds after changing lanes
of or emerges from beside a vehicle
● When entering a curve, driving around
● When approaching a vehicle ahead
a curve and a few seconds after driving
which is perpendicular or at an angle
around a curve
to the vehicle, or is facing the vehicle
● If a parked vehicle is perpendicular or
Changing proactive driving
at an angle to the vehicle
assist settings
● When a bicycle is a child sized bicycle,
is carrying a large load, is carrying an
 The proactive driving assist can be
extra passenger, or has an unusual
enabled/disabled through a cus-
shape (bicycles equipped with a child
seat, tandem bicycles, etc.)
tomize setting. (P.565)
 The following settings of the proac-
2704-5. Using the driving support systemstive driving assist can be changed(P.565)through customize operation displayDepending on the situation, the following indicators or icons will be icons cannot be displayed unless the display is changed to the driving safetysupport function information  White: Monitoring for detectable objects Green: Detectable object crossing theroad or detectable object on the side ofthe road assistance operatingA pedestrian has been detected as crossingthe road or on the side of the road and brakeor steering assistance is operatingA vehicle has been detected on the side ofthe road and brake or steering operationassistance is being performed Steering operation assistance is beingperformed to prevent the vehicle fromapproaching too close to a detectableobject on the side of the road When the steering assist is operatingPreceding vehicle deceleration assistance isbeing performedWarning to maintain appropriate vehicle-to-vehicle distanceCurve deceleration assistance is being per-formed
270
4-5. Using the driving support systems
tive driving assist can be changed
(P.565)
through customize settings.
System operation display
Depending on the situation, the following indicators or icons will be displayed.
Some icons cannot be displayed unless the display is changed to the driving safety
support function information screen.
Icon
Meaning
 White: Monitoring for detectable objects
 Green: Detectable object crossing the
road or detectable object on the side of
the road assistance operating
A pedestrian has been detected as crossing
the road or on the side of the road and brake
or steering assistance is operating
A vehicle has been detected on the side of
the road and brake or steering operation
assistance is being performed
 Steering operation assistance is being
performed to prevent the vehicle from
approaching too close to a detectable
object on the side of the road
 When the steering assist is operating
Preceding vehicle deceleration assistance is
being performed
Warning to maintain appropriate vehicle-to-
vehicle distance
Curve deceleration assistance is being per-
formed
4-5. Using the driving support systems271■ Hands off steering wheel warning oper-ationIn the following situations, a message urgingthe driver to grip the steering wheel and theicon shown in the illustration will be dis-played on the display to warn the driver. Ifthe system detects that the steering wheel isheld, the warning will be canceled. Whenusing the system, make sure to grip thesteering wheel firmly, regardless of whetherthe warning is operating or not.4● When assistance to a detectable objectcrossing the road or assistance to aDrivingdetectable object on the side of the roadis performed and the system determinesthe driver is not holding the steeringwheelIf no operations are detected for a certainamount of time, a buzzer will sound, thewarning will operate. This warning may alsooperate if the driver only operates steeringwheel a small amount continuously.■ Warning operation after precedingvehicle deceleration assistance hasendedAfter preceding vehicle deceleration assis-tance has ended, if the driver does notoperate the brake pedal or acceleratorpedal and the vehicle approaches the pre-ceding vehicle, the display will flash and abuzzer will sound to urge the driver todecelerate. If the system determines thatthe driver is operating the brake pedal oraccelerator pedal, the warning will be can-celed.
4-5. Using the driving support systems
271
■ Hands off steering wheel warning oper-
ation
In the following situations, a message urging
the driver to grip the steering wheel and the
icon shown in the illustration will be dis-
played on the display to warn the driver. If
the system detects that the steering wheel is
held, the warning will be canceled. When
using the system, make sure to grip the
steering wheel firmly, regardless of whether
the warning is operating or not.
4
● When assistance to a detectable object
crossing the road or assistance to a
Driving
detectable object on the side of the road
is performed and the system determines
the driver is not holding the steering
wheel
If no operations are detected for a certain
amount of time, a buzzer will sound, the
warning will operate. This warning may also
operate if the driver only operates steering
wheel a small amount continuously.
■ Warning operation after preceding
vehicle deceleration assistance has
ended
After preceding vehicle deceleration assis-
tance has ended, if the driver does not
operate the brake pedal or accelerator
pedal and the vehicle approaches the pre-
ceding vehicle, the display will flash and a
buzzer will sound to urge the driver to
decelerate. If the system determines that
the driver is operating the brake pedal or
accelerator pedal, the warning will be can-
celed.
2724-5. Using the driving support systemsFCTA (Front Crossing TrafficAlert) **: If equippedWhen approaching an intersection,etc., at a low speed, vehiclesapproaching from the left and rightof the front of the vehicle can bedetected and the driver informed ofWARNINGthese vehicles.■ For safe useDriving safely is solely the responsibilityof the driver. Pay careful attention to theFCTA system controlsurrounding conditions in order toensure safe driving. The FCTA system is When the system detects a vehiclea supplementary system that informs theapproaching from the left or right indriver of vehicles approaching from theleft and right of the front of the of your vehicle whenOver-reliance on this system may lead toapproaching an intersection, a noti-an accident resulting in death or seriousfication will be . The details of the warning displaymay differ from the actual traffic condi-• Head-up display (if equipped)tions. Although the warning display willstop being displayed after a certainamount of time, this does not necessarilyindicate that there are no longer anyvehicles or pedestrians around yourvehicle.■ FCTA system operating conditionsThe system will operate when all of the fol-lowing conditions are met:● A shift position other than P or R is When the system determines thatselectedyour vehicle may be about to enter● The vehicle speed is approximately 15an intersection even though a vehi-km/h (10 mph) or lesscle is approaching from the left or● A vehicle is approaching from the left orright in front of your vehicle, aright in front of your vehicle at a speedbetween approximately 10 to 60 km/h (7buzzer will sound and a messageto 37 mph)will be displayed to urge you to● There are no vehicles in front of yourdepress the brake ● The accelerator pedal is not being• Multi-information displaystrongly depressed
272
4-5. Using the driving support systems
FCTA (Front Crossing Traffic
Alert) *
*
: If equipped
When approaching an intersection,
etc., at a low speed, vehicles
approaching from the left and right
of the front of the vehicle can be
detected and the driver informed of
WARNING
these vehicles.
■ For safe use
Driving safely is solely the responsibility
of the driver. Pay careful attention to the
FCTA system control
surrounding conditions in order to
ensure safe driving. The FCTA system is
 When the system detects a vehicle
a supplementary system that informs the
approaching from the left or right in
driver of vehicles approaching from the
left and right of the front of the vehicle.
front of your vehicle when
Over-reliance on this system may lead to
approaching an intersection, a noti-
an accident resulting in death or serious
fication will be displayed.
injury. The details of the warning display
may differ from the actual traffic condi-
• Head-up display (if equipped)
tions. Although the warning display will
stop being displayed after a certain
amount of time, this does not necessarily
indicate that there are no longer any
vehicles or pedestrians around your
vehicle.
■ FCTA system operating conditions
The system will operate when all of the fol-
lowing conditions are met:
● A shift position other than P or R is
 When the system determines that
selected
your vehicle may be about to enter
● The vehicle speed is approximately 15
an intersection even though a vehi-
km/h (10 mph) or less
cle is approaching from the left or
● A vehicle is approaching from the left or
right in front of your vehicle, a
right in front of your vehicle at a speed
between approximately 10 to 60 km/h (7
buzzer will sound and a message
to 37 mph)
will be displayed to urge you to
● There are no vehicles in front of your
depress the brake pedal.
vehicle
● The accelerator pedal is not being
• Multi-information display
strongly depressed
4-5. Using the driving support systems273● The brake pedal is not being stronglydepressed■ Situations in which the system mayoperate even though no vehicles areapproachingIn certain situations, such as the following,the system may operate even though novehicles are approaching:● When an oncoming vehicle approaches● When approaching objects on the road-and passesside, such as guardrails, traffic signs, util-ity poles, street lights, trees, tall grass,● When being overtaken by another vehi-walls, ● When passing an object on the side of● When driving next to another vehicle or athe road, such as a parked vehiclepedestrian● When a vehicle or pedestrian is● When a vehicle or pedestrianapproaching from the left or right in frontapproaches the side of your vehicleof your vehicle in the distance■ Situations in which the system may not● When a vehicle or pedestrian is movingoperate properly4within a parking spot, etc., next to the laneIn situations such as the following, a vehicleyour vehicle is inmay not be detected by a front side radar● When a pedestrian or bicyclist isDrivingsensor and the system may not operateapproaching on a sidewalkproperly:● When a vehicle or pedestrian is moving● If an approaching vehicle moves sud-away from your vehicledenly (sudden steering, acceleration,● When an approaching vehicle is deceler-deceleration, etc.)ating or stops● When an approaching vehicle makes aleft/right turn immediately in front of yourvehicle● When a pedestrian is approaching yourvehicle● When an oncoming vehicle makes aright/left turn● When your vehicle enters an intersection● If a vehicle is approaching from the left orbefore a vehicle approaching from theright of the front of your vehicle diago-left or right in front of your vehiclenally● When stopped at traffic light and a vehi-● When a vehicle is approaching from thecle approaches from the left or right inleft or right in front of your vehicle in thefront of your vehicledistance● When making a left/right turn in
4-5. Using the driving support systems
273
● The brake pedal is not being strongly
depressed
■ Situations in which the system may
operate even though no vehicles are
approaching
In certain situations, such as the following,
the system may operate even though no
vehicles are approaching:
● When an oncoming vehicle approaches
● When approaching objects on the road-
and passes
side, such as guardrails, traffic signs, util-
ity poles, street lights, trees, tall grass,
● When being overtaken by another vehi-
walls, etc.
cle
● When passing an object on the side of
● When driving next to another vehicle or a
the road, such as a parked vehicle
pedestrian
● When a vehicle or pedestrian is
● When a vehicle or pedestrian
approaching from the left or right in front
approaches the side of your vehicle
of your vehicle in the distance
■ Situations in which the system may not
● When a vehicle or pedestrian is moving
operate properly
4
within a parking spot, etc., next to the lane
In situations such as the following, a vehicle
your vehicle is in
may not be detected by a front side radar
● When a pedestrian or bicyclist is
Driving
sensor and the system may not operate
approaching on a sidewalk
properly:
● When a vehicle or pedestrian is moving
● If an approaching vehicle moves sud-
away from your vehicle
denly (sudden steering, acceleration,
● When an approaching vehicle is deceler-
deceleration, etc.)
ating or stops
● When an approaching vehicle makes a
left/right turn immediately in front of your
vehicle
● When a pedestrian is approaching your
vehicle
● When an oncoming vehicle makes a
right/left turn
● When your vehicle enters an intersection
● If a vehicle is approaching from the left or
before a vehicle approaching from the
right of the front of your vehicle diago-
left or right in front of your vehicle
nally
● When stopped at traffic light and a vehi-
● When a vehicle is approaching from the
cle approaches from the left or right in
left or right in front of your vehicle in the
front of your vehicle
distance
● When making a left/right turn in front of
● When there is an object between your
an approaching vehicle
vehicle and an approaching vehicle
● When several vehicles are approaching
with little space between them
● Situations in which the sensors may not
operate properly: P.238
2744-5. Using the driving support systems● Situations in which some or all of theRSA (Road Sign Assist)functions of the system cannot operate:P.239The RSA system detects specificChanging FCTA settingsroad signs using the front cameraand/or navigation system (when The FCTA can be enabled/disabledspeed limit information is available)through a customize warns the driver via displays(P.564)and buzzers. The following settings of the FCTAcan be changed through customizeWARNINGsettings. (P.564)■ For safe use● Regardless of the availability of RSAdisplay/buzzer, including conditionalspeed limit alert, it is the driver who issolely responsible for driving safelyand abiding by the regulations. There-fore, do not overly rely on this driver is solely responsible forpaying attention to the vehicle’s sur-roundings and driving safely.● Do not rely solely upon the RSA. TheRSA assists the driver by providingroad sign information, but it is not areplacement for the driver’s own visionand awareness. Driving safely is solelythe responsibility of the driver. Paycareful attention to the surroundingconditions in order to ensure safe driv-ing.■ Situations in which the RSA shouldnot be usedWhen it is necessary to disable the sys-tem: P.233■ Situations in which the system maynot operate properlySituations in which the sensors may notoperate properly: P.238Display Function When the front camera detects asign or information of a sign is avail-able from the navigation system, the
274
4-5. Using the driving support systems
● Situations in which some or all of the
RSA (Road Sign Assist)
functions of the system cannot operate:
P.239
The RSA system detects specific
Changing FCTA settings
road signs using the front camera
and/or navigation system (when
 The FCTA can be enabled/disabled
speed limit information is available)
through a customize setting.
and warns the driver via displays
(P.564)
and buzzers.
 The following settings of the FCTA
can be changed through customize
WARNING
settings. (P.564)
■ For safe use
● Regardless of the availability of RSA
display/buzzer, including conditional
speed limit alert, it is the driver who is
solely responsible for driving safely
and abiding by the regulations. There-
fore, do not overly rely on this system.
The driver is solely responsible for
paying attention to the vehicle’s sur-
roundings and driving safely.
● Do not rely solely upon the RSA. The
RSA assists the driver by providing
road sign information, but it is not a
replacement for the driver’s own vision
and awareness. Driving safely is solely
the responsibility of the driver. Pay
careful attention to the surrounding
conditions in order to ensure safe driv-
ing.
■ Situations in which the RSA should
not be used
When it is necessary to disable the sys-
tem: P.233
■ Situations in which the system may
not operate properly
Situations in which the sensors may not
operate properly: P.238
Display Function
 When the front camera detects a
sign or information of a sign is avail-
able from the navigation system, the
4-5. Using the driving support systems275sign will be displayed on the display.● When driving around a roundabout● When a sign intended for trucks, etc. is Multiple signs can be on the specifications of the● When the vehicle is driven in a countryvehicle, the number of displayed signs maywith a different direction of trafficbe limited.● When the navigation system map data isout of date■ Operating conditions of sign display● When the navigation system cannot beusedSigns will be displayed when the followingconditions are met:In this case, the speed limit signs displayed● The system has detected a signon the multi-information display and navi-gation system display may the following situations, a displayed signmay stop being displayed:● When a new sign has not been detectedNotification functionfor a certain distance● When the system determines that theIn the following situations, the RSA sys-road being driven on has changed, suchtem will output a warning to notify the4as after a left or right turndriver.■ Situations in which the display function If the vehicle speed exceeds themay not operate properlyDrivingspeed warning threshold of theIn the following situations, the RSA systemmay not operate properly and may notspeed limit sign displayed on thedetect signs or may display the incorrectdisplay, the sign display will besign. However, this does not indicate a and a buzzer will● When a sign is dirty, faded, tilted or bentsound.● When the contrast of an electronic sign isAlso when the limit speed to be displayedlowis changed due to the change of driving● When all or part of a sign is hidden by azones, etc., the sign display will be empha-tree, utility pole, and a buzzer will sound * to alert the● When a sign is detected by the frontdriver. *camera for a short amount of time* : The availability of emphasized display● When the driving state (turning, chang-ing lanes, etc.) is judged incorrectlyand buzz
4-5. Using the driving support systems
275
sign will be displayed on the display.
● When driving around a roundabout
● When a sign intended for trucks, etc. is
 Multiple signs can be displayed.
detected
Depending on the specifications of the
● When the vehicle is driven in a country
vehicle, the number of displayed signs may
with a different direction of traffic
be limited.
● When the navigation system map data is
out of date
■ Operating conditions of sign display
● When the navigation system cannot be
used
Signs will be displayed when the following
conditions are met:
In this case, the speed limit signs displayed
● The system has detected a sign
on the multi-information display and navi-
gation system display may differ.
In the following situations, a displayed sign
may stop being displayed:
● When a new sign has not been detected
Notification function
for a certain distance
● When the system determines that the
In the following situations, the RSA sys-
road being driven on has changed, such
tem will output a warning to notify the
4
as after a left or right turn
driver.
■ Situations in which the display function
 If the vehicle speed exceeds the
may not operate properly
Driving
speed warning threshold of the
In the following situations, the RSA system
may not operate properly and may not
speed limit sign displayed on the
detect signs or may display the incorrect
display, the sign display will be
sign. However, this does not indicate a mal-
function.
emphasized and a buzzer will
● When a sign is dirty, faded, tilted or bent
sound.
● When the contrast of an electronic sign is
Also when the limit speed to be displayed
low
is changed due to the change of driving
● When all or part of a sign is hidden by a
zones, etc., the sign display will be empha-
tree, utility pole, etc.
sized and a buzzer will sound * to alert the
● When a sign is detected by the front
driver. *
camera for a short amount of time
* : The availability of emphasized display
● When the driving state (turning, chang-
ing lanes, etc.) is judged incorrectly
and buzzer depends on the country
● When a sign is immediately after a free-
where the vehicle is available.
way junction or in an adjacent lane just
 When the RSA system detects a no-
before merging
entry sign and determines that the
● When stickers are attached to the rear of
vehicle has entered the no-entry
a preceding vehicle
area based on the map information
● When a sign similar to a system compati-
ble sign is detected as a system compati-
of the navigation system, the no-
ble sign
entry sign displayed on the multi-
● When a speed limit sign for a frontage
information display will flash and a
road is within detection range of the front
buzzer will sound.
camera
2764-5. Using the driving support systems• Speed limit related information *1, 2■ Operating conditions of the notificationfunctions● Excess speed notification functionMotorwayThis function will operate when the follow-ing condition is met:• A speed limit road sign is recognized byMotorway exitthe system.● No entry notification functionThis function will operate when all of the fol-Expresswaylowing conditions are met:• More than one no entry road signs arerecognized by the system simultaneously.• The vehicle is passing between no entryExpressway exitroad signs recognized by the system.• The vehicle is equipped with an on-boardnavigation area beginningTypes of road signs supportedUrban area ending The following types of road signscan be , non-standard or recently intro-Residential area beginningduced traffic signs may not be displayed.• Speed limit road signs *Residential area endingSpeed limit begins/Maximumspeed zone begins*1: Displayed when a sign is detected butspeed limit information for the road isnot available from the navigation sys-Speed limit ends/ zone ends*2: No speed limit informationis dis-*: No speed limit informationis dis-played when neither speed limit roadplayed when neither speed limit roadsign nor speed limit related informationsign nor speed limit related informationis available.
276
4-5. Using the driving support systems
• Speed limit related information *1, 2
■ Operating conditions of the notification
functions
● Excess speed notification function
Motorway
This function will operate when the follow-
ing condition is met:
• A speed limit road sign is recognized by
Motorway exit
the system.
● No entry notification function
This function will operate when all of the fol-
Expressway
lowing conditions are met:
• More than one no entry road signs are
recognized by the system simultaneously.
• The vehicle is passing between no entry
Expressway exit
road signs recognized by the system.
• The vehicle is equipped with an on-board
navigation system.
Urban area beginning
Types of road signs supported
Urban area ending
 The following types of road signs
can be displayed.
However, non-standard or recently intro-
Residential area beginning
duced traffic signs may not be displayed.
• Speed limit road signs *
Residential area ending
Speed limit begins/Maximum
speed zone begins
*1
: Displayed when a sign is detected but
speed limit information for the road is
not available from the navigation sys-
Speed limit ends/Maximum
tem.
speed zone ends
*2
: No speed limit information
is dis-
*
: No speed limit information
is dis-
played when neither speed limit road
played when neither speed limit road
sign nor speed limit related information
sign nor speed limit related information
is available.
is available.
4-5. Using the driving support systems277• No overtaking road signsDuplicate display exampleNo overtaking beginsChanging RSA settingsNo overtaking ends The following settings of the RSAcan be changed through customize• Other road signssettings. (P.566)No-entryEnd of prohibition4StopDrivingWarning• Speed limit with supplemental mark *1IceSupplemental mark exists *2Exit ramp on rightExit ramp on leftTime*1: Displayed simultaneously with a speedlimit sign.*2: Content not recognized. Depending on the specifications ofthe vehicle, signs may be displayedoverlapping.
4-5. Using the driving support systems
277
• No overtaking road signs
Duplicate display example
No overtaking begins
Changing RSA settings
No overtaking ends
 The following settings of the RSA
can be changed through customize
• Other road signs
settings. (P.566)
No-entry
End of prohibition
4
Stop
Driving
Warning
• Speed limit with supplemental mark *1
Ice
Supplemental mark exists *2
Exit ramp on right
Exit ramp on left
Time
*1
: Displayed simultaneously with a speed
limit sign.
*2
: Content not recognized.
 Depending on the specifications of
the vehicle, signs may be displayed
overlapping.
2784-5. Using the driving support systemsDynamic radar cruise con-● Even if the system is operating cor-rectly, the condition of a precedingtrolvehicle as recognized by the driverand detected by the system may , it is necessary for the driverThis dynamic radar cruise controlto pay attention, assess risks, anddetects the presence of vehiclesensure safety. Over-reliance on thissystem to drive the vehicle safely mayahead, determines the currentlead to an accident resulting in deathvehicle-to-vehicle distance, andor serious to maintain a suitable dis-■ Precautions for the driving assist sys-tance from the vehicle ahead. Thetemsdesired vehicle-to-vehicle dis-Observe the following precautions, astance can be set by operating thethere are limitations to the assistancevehicle-to-vehicle distance by the system. Over-relianceon this system may lead to an accidentUse the dynamic radar cruise con-resulting in death or serious only on highways and express-● Details of support provided for ’s visionThe dynamic radar cruise control is onlyWARNINGintended to help the driver in determin-ing the distance between the driver’s■ For safe useown vehicle and a designated preceding● Driving safely is solely the responsibil-vehicle. It is not a system which allows fority of the driver. Do not overly rely oncareless or inattentive driving, and is notthis system, and pay careful attentiona system which assists in poor visibilityto the surrounding conditions in ensure safe driver must pay attention to their● The dynamic radar cruise control pro-surroundings, even when the vehiclevides driving assistance to reduce ’s burden. However, there arelimitations to the assistance provided.● Details of support provided for thedriver’s judgementRead the following items carefully. Donot overly rely on this system and alwaysThe dynamic radar cruise control deter-drive whet
278
4-5. Using the driving support systems
Dynamic radar cruise con-
● Even if the system is operating cor-
rectly, the condition of a preceding
trol
vehicle as recognized by the driver
and detected by the system may differ.
Therefore, it is necessary for the driver
This dynamic radar cruise control
to pay attention, assess risks, and
detects the presence of vehicles
ensure safety. Over-reliance on this
system to drive the vehicle safely may
ahead, determines the current
lead to an accident resulting in death
vehicle-to-vehicle distance, and
or serious injury.
operates to maintain a suitable dis-
■ Precautions for the driving assist sys-
tance from the vehicle ahead. The
tems
desired vehicle-to-vehicle dis-
Observe the following precautions, as
tance can be set by operating the
there are limitations to the assistance
vehicle-to-vehicle distance switch.
provided by the system. Over-reliance
on this system may lead to an accident
Use the dynamic radar cruise con-
resulting in death or serious injury.
trol only on highways and express-
● Details of support provided for the
ways.
driver’s vision
The dynamic radar cruise control is only
WARNING
intended to help the driver in determin-
ing the distance between the driver’s
■ For safe use
own vehicle and a designated preceding
● Driving safely is solely the responsibil-
vehicle. It is not a system which allows for
ity of the driver. Do not overly rely on
careless or inattentive driving, and is not
this system, and pay careful attention
a system which assists in poor visibility
to the surrounding conditions in order
conditions.
to ensure safe driving.
The driver must pay attention to their
● The dynamic radar cruise control pro-
surroundings, even when the vehicle
vides driving assistance to reduce the
stops.
driver’s burden. However, there are
limitations to the assistance provided.
● Details of support provided for the
driver’s judgement
Read the following items carefully. Do
not overly rely on this system and always
The dynamic radar cruise control deter-
drive carefully.
mines whether the distance between the
driver’s own vehicle and a designated
Conditions under which the system may
preceding vehicle is within a set range. It
not operate correctly: P.286
is not capable of making any other type
of judgement. Therefore, it is absolutely
● Set the speed appropriately according
necessary for the driver to remain vigi-
to the speed limit, traffic flow, road
lant and to determine whether or not
conditions, weather conditions, etc.
there is a possibility of danger.
The driver is responsible for confirm-
ing the set speed.
● Details of support provided for the
driver’s operation
4-5. Using the driving support systems279WARNINGThe dynamic radar cruise control doesnot include functions which will preventor avoid collisions with vehicles ahead ofyour vehicle. Therefore, if there is everany possibility of danger, the driver musttake immediate and direct control of thevehicle and act appropriately in order toensure safety.■ Situations in which the dynamic radarcruise control should not be usedDo not use the dynamic radar cruisecontrol in the following situations. As thesystem will not be able to provide appro-priate control, using it may lead to anaccident resulting in death or seriousinjury.● Roads where there are pedestrians,4cyclists, etc.● When driving on a highway orDrivingexpressway entrance or exit● When the approach warning soundsfrequently● Situations in which the sensors may notoperate properly: P.238● Situations in which the lane may not bedetected: P.239
4-5. Using the driving support systems
279
WARNING
The dynamic radar cruise control does
not include functions which will prevent
or avoid collisions with vehicles ahead of
your vehicle. Therefore, if there is ever
any possibility of danger, the driver must
take immediate and direct control of the
vehicle and act appropriately in order to
ensure safety.
■ Situations in which the dynamic radar
cruise control should not be used
Do not use the dynamic radar cruise
control in the following situations. As the
system will not be able to provide appro-
priate control, using it may lead to an
accident resulting in death or serious
injury.
● Roads where there are pedestrians,
4
cyclists, etc.
● When driving on a highway or
Driving
expressway entrance or exit
● When the approach warning sounds
frequently
● Situations in which the sensors may not
operate properly: P.238
● Situations in which the lane may not be
detected: P.239
2804-5. Using the driving support systemsBasic functionsA Constant speed cruising:When there are no vehicles aheadThe vehicle drives at the speed set by the the set vehicle speed is exceeded while driving down a hill, the set vehicle speed displaywill blink and a buzzer will sound.B Deceleration and follow-up cruisingWhen a preceding vehicle driving slower than the set vehicle speed is detectedWhen a vehicle is detected driving ahead of your vehicle, the vehicle automatically decel-erates and if a greater reduction in vehicle speed is necessary, the brakes are applied (thestop lights will come on at this time). The vehicle is controlled to maintain the vehicle-to-vehicle distance set by the driver, in accordance with changes in the speed of the preced-ing vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicleahead, the approach warning will sound.C AccelerationWhen there are no longer any preceding vehicles driving slower than the setvehicle speedThe vehicle accelerates until the set vehicle speed is reached and then resumes constantspeed cruising.D Starting off:
280
4-5. Using the driving support systems
Basic functions
A Constant speed cruising:
When there are no vehicles ahead
The vehicle drives at the speed set by the driver.
If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display
will blink and a buzzer will sound.
B Deceleration and follow-up cruising
When a preceding vehicle driving slower than the set vehicle speed is detected
When a vehicle is detected driving ahead of your vehicle, the vehicle automatically decel-
erates and if a greater reduction in vehicle speed is necessary, the brakes are applied (the
stop lights will come on at this time). The vehicle is controlled to maintain the vehicle-to-
vehicle distance set by the driver, in accordance with changes in the speed of the preced-
ing vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicle
ahead, the approach warning will sound.
C Acceleration
When there are no longer any preceding vehicles driving slower than the set
vehicle speed
The vehicle accelerates until the set vehicle speed is reached and then resumes constant
speed cruising.
D Starting off:
4-5. Using the driving support systems281If a preceding vehicle stops, the vehicle will also stop (controlled stop). After thepreceding vehicle starts off, pressing the “RES” switch or depressing the accelera-tor pedal will resume follow-up cruising (start off operation). If a start off operationis not performed, the controlled stop will with LCA: While driving on a highway or expressway, if a preceding vehi-cle stops, your vehicle will stop accordingly. On some highways and expressways,if the system determines that the preceding vehicle starts off within approximately3 minutes of stopping, a buzzer will sound and a message will be displayed on themulti-information display to notify the driver, and your vehicle will start off accord-ingly following the preceding vehicle. (Extended resume time)A Driving assist mode select switchSystem componentsB Driving assist switch■ Meter displayC “+” switch/“RES” switch4D “-” switchE Cancel switchDrivingF Vehicle-to-vehicle distance switch Vehicles with a head-up displayA Multi-information displayB Set vehicle speedC Indicators■ Switches Vehicles without a head-up displayA The function of each switch differs
4-5. Using the driving support systems
281
If a preceding vehicle stops, the vehicle will also stop (controlled stop). After the
preceding vehicle starts off, pressing the “RES” switch or depressing the accelera-
tor pedal will resume follow-up cruising (start off operation). If a start off operation
is not performed, the controlled stop will continue.
Vehicles with LCA: While driving on a highway or expressway, if a preceding vehi-
cle stops, your vehicle will stop accordingly. On some highways and expressways,
if the system determines that the preceding vehicle starts off within approximately
3 minutes of stopping, a buzzer will sound and a message will be displayed on the
multi-information display to notify the driver, and your vehicle will start off accord-
ingly following the preceding vehicle. (Extended resume time)
A Driving assist mode select switch
System components
B Driving assist switch
■ Meter display
C “+” switch/“RES” switch
4
D “-” switch
E Cancel switch
Driving
F Vehicle-to-vehicle distance switch
 Vehicles with a head-up display
A Multi-information display
B Set vehicle speed
C Indicators
■ Switches
 Vehicles without a head-up display
A The function of each switch differs
2824-5. Using the driving support systemsdepending on the conditions and Vehicles with a head-up a switch is touched, the function ofeach switch is displayed on the head-updisplay. If the head-up display is off, thefunctions will be displayed on the multi-information display.B Driving assist mode select switchC Driving assist switchD “RES” switch2 Using the accelerator pedal, accel-erate or decelerate to the desiredE “+” switchvehicle speed (approximately 30F “-” switchkm/h [20 mph] or more), and pressthe driving assist switch to set theG Vehicle-to-vehicle distance switchset vehicle speed.H Cancel switchThe set vehicle speed will be displayed onthe multi-information the dynamic radar cruiseThe vehicle speed at the moment thecontrolswitch is released will be the set vehiclespeed.■ Setting the vehicle speed Vehicles without a head-up display1 Press the driving assist mode selectswitch to select dynamic radarcruise dynamic radar cruise control indicatorwill illuminate. Vehicles without a head-up display
282
4-5. Using the driving support systems
depending on the conditions and
 Vehicles with a head-up display
settings.
When a switch is touched, the function of
each switch is displayed on the head-up
display. If the head-up display is off, the
functions will be displayed on the multi-
information display.
B Driving assist mode select switch
C Driving assist switch
D “RES” switch
2 Using the accelerator pedal, accel-
erate or decelerate to the desired
E “+” switch
vehicle speed (approximately 30
F “-” switch
km/h [20 mph] or more), and press
the driving assist switch to set the
G Vehicle-to-vehicle distance switch
set vehicle speed.
H Cancel switch
The set vehicle speed will be displayed on
the multi-information display.
Using the dynamic radar cruise
The vehicle speed at the moment the
control
switch is released will be the set vehicle
speed.
■ Setting the vehicle speed
 Vehicles without a head-up display
1 Press the driving assist mode select
switch to select dynamic radar
cruise control.
The dynamic radar cruise control indicator
will illuminate.
 Vehicles without a head-up display
4-5. Using the driving support systems283 Vehicles with a head-up displayShort press adjustment: Press the switchLong press adjustment: Press and hold theswitch until the desired set vehicle speed set vehicle speed will increase ordecrease as follows:Short press adjustment: By 1 km/h (0.6mph) or 1 mph (1.6 km/h) each time theswitch is pressedLong press adjustment: Increases or■ Adjusting the set vehicle speeddecreases in 5 km/h (3.1 mph) or 5 mph (8 Adjusting the set vehicle speedkm/h) increments continuously while theusing the switchesswitch is pressed and heldThe set vehicle speed adjustment incre-To change the set vehicle speed, pressment can be changed through a customizethe “+” switch or “-” switch until thesetting.4desired speed is displayed. Increasing the set vehicle speed Vehicles without a head-up displayusing the accelerator pedalDriving1 Depress the accelerator pedal toaccelerate the vehicle to thedesired vehicle speed.2 Press the “+” switch.■ Canceling/resuming control1 Press the cancel switch or drivingassist switch to cancel will also be canceled if the brake Vehicles with a head-up displaypedal is depressed.(If the vehicle has been stopped by systemcontrol, depressing the brake pedal will notcancel control.)1 Increase set vehicle speed2 Decrease set vehicle speed
4-5. Using the driving support systems
283
 Vehicles with a head-up display
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
Short press adjustment: By 1 km/h (0.6
mph) or 1 mph (1.6 km/h) each time the
switch is pressed
Long press adjustment: Increases or
■ Adjusting the set vehicle speed
decreases in 5 km/h (3.1 mph) or 5 mph (8
 Adjusting the set vehicle speed
km/h) increments continuously while the
using the switches
switch is pressed and held
The set vehicle speed adjustment incre-
To change the set vehicle speed, press
ment can be changed through a customize
the “+” switch or “-” switch until the
setting.
4
desired speed is displayed.
 Increasing the set vehicle speed
 Vehicles without a head-up display
using the accelerator pedal
Driving
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
 Vehicles with a head-up display
pedal is depressed.
(If the vehicle has been stopped by system
control, depressing the brake pedal will not
cancel control.)
1 Increase set vehicle speed
2 Decrease set vehicle speed
2844-5. Using the driving support systems Vehicles without a head-up display Vehicles without a head-up display Vehicles with a head-up display Vehicles with a head-up display2 Press the “RES” switch to resumecontrol.■ Changing the vehicle-to-vehicledistanceEach time the switch is pressed, thevehicle-to-vehicle distance setting willchange as follows:If a preceding vehicle is detected, theApproximate Dis-Illustra- Vehicle-preceding vehicle mark A will be dis-tance (Vehicletionto-vehicleSpeed: 100 km/ distance[60 mph])Approximately 601Extra longm (200 ft.)Approximately 452Longm (145 ft.)
284
4-5. Using the driving support systems
 Vehicles without a head-up display
 Vehicles without a head-up display
 Vehicles with a head-up display
 Vehicles with a head-up display
2 Press the “RES” switch to resume
control.
■ Changing the vehicle-to-vehicle
distance
Each time the switch is pressed, the
vehicle-to-vehicle distance setting will
change as follows:
If a preceding vehicle is detected, the
Approximate Dis-
Illustra- Vehicle-
preceding vehicle mark A will be dis-
tance (Vehicle
tion
to-vehicle
Speed: 100 km/h
played.
Number distance
[60 mph])
Approximately 60
1
Extra long
m (200 ft.)
Approximately 45
2
Long
m (145 ft.)
4-5. Using the driving support systems285if the preceding vehicle starts off withinApproximate Dis-Illustra- Vehicle-approximately 3 seconds, follow-uptance (Vehiclecruising will -vehicleSpeed: 100 km/hNumber distance● If the preceding vehicle starts off within[60 mph])approximately 3 seconds of the vehiclebeing stopped by system control, follow-Approximately 303Mediumup cruising will resume.m (100 ft.)■ Automatic cancellation of vehicle-to-Approximately 25vehicle distance control mode4Shortm (85 ft.)In the following situations, vehicle-to-vehi-cle distance control mode will be canceledThe actual vehicle-to-vehicle distance var-automatically:ies in accordance with the vehicle speed.● When the brake control or outputAlso, when the vehicle is stopped by sys-restriction control of a driving supporttem control, it will be stopped at a certainsystem operates(For example: Pre-Collision System,distance from the preceding vehicle,drive-start control)depending on the situation, regardless of● When the parking brake has been oper-the 4● When the vehicle is stopped by system■ Operating conditionscontrol on a steep incline● The D shift position is ● When any of the following are detected● The desired set speed can be set whenwhile the vehicle is stopped by systemthe vehicle speed is approximately 30control:km/h (20 mph) or more.• The driver’s seat belt is unfastened• If the vehicle speed is set while driving at• The driver’s door is openedbelow approximately 30 km/h (20 mph),• Approximately 3 minutes have elapsedthe set vehicle speed will be approxi-since the vehicle was stoppedmately 30 km/h (20 mph).The parking brake may be actived automat-• If the vehicle speed is set while driving atically.a speed that exceeds the system’s upperlimit, the set vehicle speed will be the sys-● Situations in which some or all of thetem’s upper of the system cannot operate:P.239■ Accelerating after setting the vehiclespeed■ Dynamic radar
4-5. Using the driving support systems
285
if the preceding vehicle starts off within
Approximate Dis-
Illustra- Vehicle-
approximately 3 seconds, follow-up
tance (Vehicle
cruising will resume.
tion
to-vehicle
Speed: 100 km/h
Number distance
● If the preceding vehicle starts off within
[60 mph])
approximately 3 seconds of the vehicle
being stopped by system control, follow-
Approximately 30
3
Medium
up cruising will resume.
m (100 ft.)
■ Automatic cancellation of vehicle-to-
Approximately 25
vehicle distance control mode
4
Short
m (85 ft.)
In the following situations, vehicle-to-vehi-
cle distance control mode will be canceled
The actual vehicle-to-vehicle distance var-
automatically:
ies in accordance with the vehicle speed.
● When the brake control or output
Also, when the vehicle is stopped by sys-
restriction control of a driving support
tem control, it will be stopped at a certain
system operates
(For example: Pre-Collision System,
distance from the preceding vehicle,
drive-start control)
depending on the situation, regardless of
● When the parking brake has been oper-
the setting.
ated
4
● When the vehicle is stopped by system
■ Operating conditions
control on a steep incline
● The D shift position is selected.
Driving
● When any of the following are detected
● The desired set speed can be set when
while the vehicle is stopped by system
the vehicle speed is approximately 30
control:
km/h (20 mph) or more.
• The driver’s seat belt is unfastened
• If the vehicle speed is set while driving at
• The driver’s door is opened
below approximately 30 km/h (20 mph),
• Approximately 3 minutes have elapsed
the set vehicle speed will be approxi-
since the vehicle was stopped
mately 30 km/h (20 mph).
The parking brake may be actived automat-
• If the vehicle speed is set while driving at
ically.
a speed that exceeds the system’s upper
limit, the set vehicle speed will be the sys-
● Situations in which some or all of the
tem’s upper limit.
functions of the system cannot operate:
P.239
■ Accelerating after setting the vehicle
speed
■ Dynamic radar cruise control system
warning messages and buzzers
As with normal driving, acceleration can be
For safe use: P.230
performed by depressing the accelerator
pedal. After accelerating, the vehicle will
■ Preceding vehicles that the sensor may
return to the set vehicle speed. However,
not detect correctly
while in vehicle-to-vehicle distance control
mode, the vehicle speed may decrease to
In the following situations, depending on the
below the set vehicle speed in order to
conditions, if the system cannot provide suf-
maintain the distance from the preceding
ficient deceleration or acceleration is nec-
vehicle.
essary, operate the brake pedal or
accelerator pedal.
■ When the vehicle is stopped by system
As the sensor may not be able to correctly
control during follow-up cruising
detect these types of vehicles, the approach
● When the “RES” switch is pressed while
warning (P.286) may not operate.
the vehicle is stopped by system control,
2864-5. Using the driving support systems● When a vehicle cuts in front of your vehi-Approach warningcle or changes lanes away from yourvehicle extremely slowly or quicklyIn situations where the vehicle● When changing lanesapproaches a preceding vehicle and● When a preceding vehicle is driving at athe system cannot provide sufficientlow speeddeceleration, such as if a vehicle cuts in● When a vehicle is stopped in the samefront of the vehicle, a warning displaylane as the vehiclewill flash and a buzzer will sound to● When a motorcycle is traveling in thesame lane as the vehiclealert the driver. Depress the brake■ Conditions under which the system maypedal to ensure appropriate vehicle-not operate correctlyto-vehicle the following situations, operate the■ Warnings may not occur whenbrake pedal (or accelerator pedal, depend-ing on the situation) as the following situations, the warningAs the sensor may not be able to correctlymay not operate even though the vehi-detect a vehicle, the system may not oper-cle-to-vehicle distance is properly.● When a preceding vehicle brakes sud- When the preceding vehicle is trav-denlyeling at the same speed or faster● When changing lanes at low speeds,than your vehiclesuch as in a traffic jam When the preceding vehicle is trav-■ Conditions for extended resume time(Vehicles with LCA)eling at an extremely low speedExtended resume time is activated when all Immediately after the vehicle speedof the following conditions are satisfied:has been set● The connected service that Lexus pro- When the accelerator pedal isvides is subscribed to. Contact anyauthorized Lexus retailer or Lexus autho-depressedrized repairer, or any reliable repairer.● The vehicle is driving on a vehicle-onlyroad, such as an speed reduction function● There is a preceding vehicle and the sys-When a curve is detected, the vehicletem is able to detect will begin being reduced. When● No vehicle interruptions oc
286
4-5. Using the driving support systems
● When a vehicle cuts in front of your vehi-
Approach warning
cle or changes lanes away from your
vehicle extremely slowly or quickly
In situations where the vehicle
● When changing lanes
approaches a preceding vehicle and
● When a preceding vehicle is driving at a
the system cannot provide sufficient
low speed
deceleration, such as if a vehicle cuts in
● When a vehicle is stopped in the same
front of the vehicle, a warning display
lane as the vehicle
will flash and a buzzer will sound to
● When a motorcycle is traveling in the
same lane as the vehicle
alert the driver. Depress the brake
■ Conditions under which the system may
pedal to ensure appropriate vehicle-
not operate correctly
to-vehicle distance.
In the following situations, operate the
■ Warnings may not occur when
brake pedal (or accelerator pedal, depend-
ing on the situation) as necessary.
In the following situations, the warning
As the sensor may not be able to correctly
may not operate even though the vehi-
detect a vehicle, the system may not oper-
cle-to-vehicle distance is short.
ate properly.
● When a preceding vehicle brakes sud-
 When the preceding vehicle is trav-
denly
eling at the same speed or faster
● When changing lanes at low speeds,
than your vehicle
such as in a traffic jam
 When the preceding vehicle is trav-
■ Conditions for extended resume time
(Vehicles with LCA)
eling at an extremely low speed
Extended resume time is activated when all
 Immediately after the vehicle speed
of the following conditions are satisfied:
has been set
● The connected service that Lexus pro-
 When the accelerator pedal is
vides is subscribed to. Contact any
authorized Lexus retailer or Lexus autho-
depressed
rized repairer, or any reliable repairer.
● The vehicle is driving on a vehicle-only
road, such as an expressway.
Curve speed reduction function
● There is a preceding vehicle and the sys-
When a curve is detected, the vehicle
tem is able to detect it.
speed will begin being reduced. When
● No vehicle interruptions occur.
the curve ends, the vehicle speed
● The preceding vehicle has not been
replaced.
reduction will end.
● Clearance sonar and FCTA are not
Depending on the situation, the vehicle
detecting the object in front of you.
speed will then return to the set vehicle
● The driver monitor judges that the driver
speed.
is looking forward.
In situations where vehicle-to-vehicle dis-
● The steering wheel has not been oper-
tance control needs to operate, such as
ated.
when a preceding vehicle cuts in front of
● The brake pedal has not been operated.
4-5. Using the driving support systems287your vehicle, the curve speed reductioncontrol will will be for lane changeIf your vehicle is being driven atapproximately 80 km/h (50 mph) ormore and a lane change to the passinglane is performed, when the turn signallever is operated and the lane ischanged, the vehicle will accelerate upto the set speed to assist in vehicles with a DCM: The system’s■ Situations in which the curve speedreduction function may not operaterecognition of which lane is the passinglane is determined by location informationIn situations such as the following, the curvespeed reduction function may not operate:and the driving condition of surroundingvehicles. The support for lane change func-● When the vehicle is being driven around4a gentle curvetion and overtaking prevention functionmay not operate if it is difficult to obtain● When the accelerator pedal is beingDrivingdepressedlocation information or there are few sur-rounding vehicles.● When the vehicle is being driven aroundan extremely short curveFor vehicles without a DCM: The system’srecognition of which lane is the passingOvertaking prevention functionlane may be based solely on the location ofthe steering wheel in the vehicle (left-handIf a detected vehicle in the passing lanedrive/right-hand drive). If the vehicle isis traveling slower than your vehicle,driven in a location where the passing laneovertaking will be on the opposite side of that where thevehicle was originally sold, the vehicle mayThe overtaking prevention function will notaccelerate when the turn signal lever isoperate if the passing lane is congested oroperated away from the passing lane. ( are traveling at low vehicle was manufactured to be drivenThis function is not available for vehicleson roads for right-hand drive vehicles [thatwithout a on the right], but is being used onroads for left-hand drive vehicles [thatovertake on th
4-5. Using the driving support systems
287
your vehicle, the curve speed reduction
control will end.
function will be canceled.
Support for lane change
If your vehicle is being driven at
approximately 80 km/h (50 mph) or
more and a lane change to the passing
lane is performed, when the turn signal
lever is operated and the lane is
changed, the vehicle will accelerate up
to the set speed to assist in overtaking.
For vehicles with a DCM: The system’s
■ Situations in which the curve speed
reduction function may not operate
recognition of which lane is the passing
lane is determined by location information
In situations such as the following, the curve
speed reduction function may not operate:
and the driving condition of surrounding
vehicles. The support for lane change func-
● When the vehicle is being driven around
4
a gentle curve
tion and overtaking prevention function
may not operate if it is difficult to obtain
● When the accelerator pedal is being
Driving
depressed
location information or there are few sur-
rounding vehicles.
● When the vehicle is being driven around
an extremely short curve
For vehicles without a DCM: The system’s
recognition of which lane is the passing
Overtaking prevention function
lane may be based solely on the location of
the steering wheel in the vehicle (left-hand
If a detected vehicle in the passing lane
drive/right-hand drive). If the vehicle is
is traveling slower than your vehicle,
driven in a location where the passing lane
overtaking will be suppressed.
is on the opposite side of that where the
vehicle was originally sold, the vehicle may
The overtaking prevention function will not
accelerate when the turn signal lever is
operate if the passing lane is congested or
operated away from the passing lane. (e.g.
vehicles are traveling at low speeds.
The vehicle was manufactured to be driven
This function is not available for vehicles
on roads for right-hand drive vehicles [that
without a DCM.
overtake on the right], but is being used on
roads for left-hand drive vehicles [that
overtake on the left]. In this case, the vehi-
Driver Monitor support function
cle may accelerate when the turn signal
While a warning of the driver monitor
lever is operated to the right.)
is being displayed, the vehicle acceler-
If your vehicle is being driven at approxi-
ation will be restrained.
mately 80 km/h (50 mph) or more and
the lane is changed to that with a vehicle
When the warning of the driver monitor
traveling slower than your vehicle, when
disappears, the restrained acceleration
the turn signal lever is operated the vehicle
2884-5. Using the driving support systemswill gradually decelerate to assist in chang-■ When the set speed is higher thaning detected speed limit Vehicles without a head-up displayDynamic Radar Cruise Controlwith Road Sign AssistWhen RSA function is enabled and thedynamic radar cruise control system isoperating, if a speed limit sign isdetected, the detected speed limit willbe displayed with an up/down set speed can beincreased/reduced to the detected Vehicles with a head-up displayspeed limit by pressing and holding the“+” switch or “-” switch.■ When the set speed is lower thanthe detected speed limit Vehicles without a head-up displayPress and hold the “-” switch.■ The dynamic radar cruise control withroad sign assist may not operate prop-erly whenAs the dynamic radar cruise control with Vehicles with a head-up displayroad sign assist may not operate properly insituations where the RSA may not operateor cannot detect signs correctly (P.260),when using this function, make sure to con-firm the actual speed the following situations, the set speedmay not change to the detected speed limitby pressing and holding the “+” switch or “-”switch:● When speed limit information is not avail-able● When the detected speed limit is thePress and hold the “+” as the set speed● When the detected speed limit is outside
288
4-5. Using the driving support systems
will gradually decelerate to assist in chang-
■ When the set speed is higher than
ing lanes.
the detected speed limit
 Vehicles without a head-up display
Dynamic Radar Cruise Control
with Road Sign Assist
When RSA function is enabled and the
dynamic radar cruise control system is
operating, if a speed limit sign is
detected, the detected speed limit will
be displayed with an up/down arrow.
The set speed can be
increased/reduced to the detected
 Vehicles with a head-up display
speed limit by pressing and holding the
“+” switch or “-” switch.
■ When the set speed is lower than
the detected speed limit
 Vehicles without a head-up display
Press and hold the “-” switch.
■ The dynamic radar cruise control with
road sign assist may not operate prop-
erly when
As the dynamic radar cruise control with
 Vehicles with a head-up display
road sign assist may not operate properly in
situations where the RSA may not operate
or cannot detect signs correctly (P.260),
when using this function, make sure to con-
firm the actual speed limit.
In the following situations, the set speed
may not change to the detected speed limit
by pressing and holding the “+” switch or “-”
switch:
● When speed limit information is not avail-
able
● When the detected speed limit is the
Press and hold the “+” switch.
same as the set speed
● When the detected speed limit is outside
4-5. Using the driving support systems289of the speed range which the dynamicChanging Dynamic radar cruiseradar cruise control system can operatecontrol settingsThe settings of Dynamic radar cruisecontrol can be changed through cus-tomize settings. (P.564)Display and system operation stateThe operating state of Dynamic radar cruise control is -information displaySituationVehicle-to-vehicleDynamic radar cruisedistance setting: Gray control being OFFWhite4DrivingVehicle-to-vehicledistance setting: Blue Constant speed cruis-ingSet vehicle speed:GreenGreenVehicle-to-vehicledistance setting: BlueSet vehicle speed:Follow-up cruisingGreenGreenPreceding vehicle:White
4-5. Using the driving support systems
289
of the speed range which the dynamic
Changing Dynamic radar cruise
radar cruise control system can operate
control settings
The settings of Dynamic radar cruise
control can be changed through cus-
tomize settings. (P.564)
Display and system operation state
The operating state of Dynamic radar cruise control is indicated.
Indicator
Multi-information display
Situation
Vehicle-to-vehicle
Dynamic radar cruise
distance setting: Gray control being OFF
White
4
Driving
Vehicle-to-vehicle
distance setting: Blue Constant speed cruis-
ing
Set vehicle speed:
Green
Green
Vehicle-to-vehicle
distance setting: Blue
Set vehicle speed:
Follow-up cruising
Green
Green
Preceding vehicle:
White
2904-5. Using the driving support systemsIndicatorMulti-information displaySituationVehicle-to-vehicledistance setting:Orange flashingSet vehicle speed:Approach warningGreenGreenPreceding vehicle:Orange flashingVehicle-to-vehicledistance setting: GraySet vehicle speed:Accelerating with theWhiteaccelerator pedalGreenPreceding vehicle:GraySet vehicle speed:Set vehicle speedGreen in reverse dis-being exceededplayGreenVehicle-to-vehicledistance setting: GraySet vehicle speed:Vehicle in controlledWhitestopGreenPreceding vehicle:Gray
290
4-5. Using the driving support systems
Indicator
Multi-information display
Situation
Vehicle-to-vehicle
distance setting:
Orange flashing
Set vehicle speed:
Approach warning
Green
Green
Preceding vehicle:
Orange flashing
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
Accelerating with the
White
accelerator pedal
Green
Preceding vehicle:
Gray
Set vehicle speed:
Set vehicle speed
Green in reverse dis-
being exceeded
play
Green
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
Vehicle in controlled
White
stop
Green
Preceding vehicle:
Gray
4-5. Using the driving support systems291Cruise controlSystem Components■ Meter displayThe vehicle can be driven at a setspeed even if the accelerator pedalis not the cruise control only on high-ways and ■ For safe use● Driving safely is solely the responsibil-ity of the driver. Therefore, do notA Set vehicle speedoverly rely on this system. The driver issolely responsible for paying attentionB Cruise control indicatorto the vehicle’s surroundings and driv-ing safely.■ Switches4● Set the speed appropriately according Vehicles without a head-up displayto the speed limit, traffic flow, roadconditions, weather conditions, driver is responsible for confirm-ing the set speed.■ Situations in which cruise controlshould not be usedDo not use the cruise control in the fol-lowing situations. As the system will notbe able to provide appropriate control,using it may lead to an accident resultingin death or serious injury.● On roads with sharp bendsA Driving assist mode select switch● On winding roadsB Driving assist switch● On slippery roads, such as those cov-C “+” switch / “RES” switchered with rain, ice or snowD “-” switch● On steep downhills, or where thereare sudden changes between sharp upE Cancel switchand down gradientsVehicle speed may exceed the set speedwhen driving down a steep hill.● When it is necessary to disable the sys-tem: P.233
4-5. Using the driving support systems
291
Cruise control
System Components
■ Meter display
The vehicle can be driven at a set
speed even if the accelerator pedal
is not depressed.
Use the cruise control only on high-
ways and expressways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Therefore, do not
A Set vehicle speed
overly rely on this system. The driver is
solely responsible for paying attention
B Cruise control indicator
to the vehicle’s surroundings and driv-
ing safely.
■ Switches
4
● Set the speed appropriately according
 Vehicles without a head-up display
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
Driving
The driver is responsible for confirm-
ing the set speed.
■ Situations in which cruise control
should not be used
Do not use the cruise control in the fol-
lowing situations. As the system will not
be able to provide appropriate control,
using it may lead to an accident resulting
in death or serious injury.
● On roads with sharp bends
A Driving assist mode select switch
● On winding roads
B Driving assist switch
● On slippery roads, such as those cov-
C “+” switch / “RES” switch
ered with rain, ice or snow
D “-” switch
● On steep downhills, or where there
are sudden changes between sharp up
E Cancel switch
and down gradients
Vehicle speed may exceed the set speed
when driving down a steep hill.
● When it is necessary to disable the sys-
tem: P.233
2924-5. Using the driving support systems Vehicles with a head-up displayUsing the cruise control■ Setting the vehicle speed1 Press the driving assist mode selectswitch to select cruise cruise control indicator will illuminate. Vehicles without a head-up display Vehicles with a head-up displayA The function of each switch differsdepending on the conditions a switch is touched, the function ofeach switch is displayed on the head-updisplay. If the head-up display is off, thefunctions will be displayed on the multi-information display.B Driving assist mode select switch2 Using the accelerator pedal, accel-erate to the desired vehicle speedC Driving assist switch(approximately 30 km/h [20 mph]D “RES” switchor more), and press the drivingassist switch to set the set vehicleE “-” switchspeed.F Cancel switchThe vehicle speed at the moment theG “+” switchswitch is released will be the set vehiclespeed.
292
4-5. Using the driving support systems
 Vehicles with a head-up display
Using the cruise control
■ Setting the vehicle speed
1 Press the driving assist mode select
switch to select cruise control.
The cruise control indicator will illuminate.
 Vehicles without a head-up display
 Vehicles with a head-up display
A The function of each switch differs
depending on the conditions and
settings.
When a switch is touched, the function of
each switch is displayed on the head-up
display. If the head-up display is off, the
functions will be displayed on the multi-
information display.
B Driving assist mode select switch
2 Using the accelerator pedal, accel-
erate to the desired vehicle speed
C Driving assist switch
(approximately 30 km/h [20 mph]
D “RES” switch
or more), and press the driving
assist switch to set the set vehicle
E “-” switch
speed.
F Cancel switch
The vehicle speed at the moment the
G “+” switch
switch is released will be the set vehicle
speed.
4-5. Using the driving support systems293 Vehicles without a head-up display Vehicles with a head-up display Vehicles with a head-up display1 Increase set vehicle speed2 Decrease set vehicle speedThe set vehicle speed will increase ordecrease as follows:Fine adjustment: By 1 km/h (0.6 mph) or 1mph (1.6 km/h) each time the switch is4pressedLarge adjustment: Increases continuouslyDrivingwhile the switch is pressed and held Increasing the set vehicle speed■ Adjusting the set vehicle speedusing the accelerator pedal Adjusting the set vehicle speed1 Depress the accelerator pedal tousing the switchesaccelerate the vehicle to thedesired vehicle change the set vehicle speed, press the“+” or “-” switch until the desired speed is2 Press the “+” .■ Canceling/resuming control Vehicles without a head-up display1 Press the cancel switch or drivingassist switch to cancel will also be canceled if the brakepedal is depressed.
4-5. Using the driving support systems
293
 Vehicles without a head-up display
 Vehicles with a head-up display
 Vehicles with a head-up display
1 Increase set vehicle speed
2 Decrease set vehicle speed
The set vehicle speed will increase or
decrease as follows:
Fine adjustment: By 1 km/h (0.6 mph) or 1
mph (1.6 km/h) each time the switch is
4
pressed
Large adjustment: Increases continuously
Driving
while the switch is pressed and held
 Increasing the set vehicle speed
■ Adjusting the set vehicle speed
using the accelerator pedal
 Adjusting the set vehicle speed
1 Depress the accelerator pedal to
using the switches
accelerate the vehicle to the
desired vehicle speed.
To change the set vehicle speed, press the
“+” or “-” switch until the desired speed is
2 Press the “+” switch.
displayed.
■ Canceling/resuming control
 Vehicles without a head-up display
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
2944-5. Using the driving support systems Vehicles without a head-up display2 Press the “RES” switch to resumecontrol.■ Automatic cancellation of the cruisecontrolIn the following situations, the cruise controlwill be canceled automatically:● When the vehicle speed drops approxi-mately 16 km/h (10 mph) or more belowthe set vehicle speed● When the vehicle speed drops below Vehicles with a head-up displayapproximately 30 km/h (20 mph)● When the brake control or outputrestriction control of a driving supportsystem operates (For example: PCS,drive-start control)● When the parking brake has been oper-ated● Situations in which some or all of thefunctions of the system cannot operate:P.239Display and system operation stateThe operating state of cruise control is -information displaySituationCruise control beingBlankOFFWhite
294
4-5. Using the driving support systems
 Vehicles without a head-up display
2 Press the “RES” switch to resume
control.
■ Automatic cancellation of the cruise
control
In the following situations, the cruise control
will be canceled automatically:
● When the vehicle speed drops approxi-
mately 16 km/h (10 mph) or more below
the set vehicle speed
● When the vehicle speed drops below
 Vehicles with a head-up display
approximately 30 km/h (20 mph)
● When the brake control or output
restriction control of a driving support
system operates (For example: PCS,
drive-start control)
● When the parking brake has been oper-
ated
● Situations in which some or all of the
functions of the system cannot operate:
P.239
Display and system operation state
The operating state of cruise control is indicated.
Indicator
Multi-information display
Situation
Cruise control being
Blank
OFF
White
4-5. Using the driving support systems295IndicatorMulti-information displaySituationSet vehicle speed:Constant speed cruis-GreeningGreenSet vehicle speed:Set vehicle speedGreen in reverse dis-being exceededplayGreen4Driving
4-5. Using the driving support systems
295
Indicator
Multi-information display
Situation
Set vehicle speed:
Constant speed cruis-
Green
ing
Green
Set vehicle speed:
Set vehicle speed
Green in reverse dis-
being exceeded
play
Green
4
Driving
2964-5. Using the driving support systemsEmergency Driving Stop● Although the emergency driving stopsystem is designed to decelerate theSystemvehicle within its lane to help avoid orhelp reduce the impact of a collision ifthe system determines that it is difficultThe emergency driving stop systemfor the driver to continue driving, itsis a system which automaticallyeffectiveness may change accordingto various conditions. Therefore, it maydecelerates and stops the vehiclenot always be able to achieve the samewithin its lane if the driver becomeslevel of performance. Also, if the oper-unable to continue driving the vehi-ating conditions are not met, this func-tion will not , such as if they have suffered amedical emergency, etc.● After the emergency driving stop sys-tem operates, if driving becomes pos-During LTA (Lane Tracing Assist)sible again, immediately begin drivingcontrol, if the system does notagain or, if necessary, park the vehicleon the shoulder of the road and set adetect driving operations, such as ifwarning reflector and flare to warnthe driver is not holding the steer-other drivers of your stopped wheel, and determines the● After this system operates, passengersdriver is not responsive, the vehicleshould attend to the driver as neces-will be decelerated and stoppedsary and take appropriate hazard pre-vention measures, such as moving to awithin its current lane to help avoidplace where safety can be ensured,a collision or reduce the impact of asuch as the shoulder of the road a guardrail.● This system detects the condition ofWARNINGthe driver through the operation of thesteering wheel. This system may oper-■ For safe useate if the driver is aware but intention-● Driving safely is solely the responsibil-ally and continuously does not operateity of the driver. Pay careful attentionthe vehicle. Also, the system may notto the surrounding conditions in orderoperate if it cannot determine that theto ensure safe driving.
296
4-5. Using the driving support systems
Emergency Driving Stop
● Although the emergency driving stop
system is designed to decelerate the
System
vehicle within its lane to help avoid or
help reduce the impact of a collision if
the system determines that it is difficult
The emergency driving stop system
for the driver to continue driving, its
is a system which automatically
effectiveness may change according
to various conditions. Therefore, it may
decelerates and stops the vehicle
not always be able to achieve the same
within its lane if the driver becomes
level of performance. Also, if the oper-
unable to continue driving the vehi-
ating conditions are not met, this func-
tion will not operate.
cle, such as if they have suffered a
medical emergency, etc.
● After the emergency driving stop sys-
tem operates, if driving becomes pos-
During LTA (Lane Tracing Assist)
sible again, immediately begin driving
control, if the system does not
again or, if necessary, park the vehicle
on the shoulder of the road and set a
detect driving operations, such as if
warning reflector and flare to warn
the driver is not holding the steer-
other drivers of your stopped vehicle.
ing wheel, and determines the
● After this system operates, passengers
driver is not responsive, the vehicle
should attend to the driver as neces-
will be decelerated and stopped
sary and take appropriate hazard pre-
vention measures, such as moving to a
within its current lane to help avoid
place where safety can be ensured,
a collision or reduce the impact of a
such as the shoulder of the road or
collision.
behind a guardrail.
● This system detects the condition of
WARNING
the driver through the operation of the
steering wheel. This system may oper-
■ For safe use
ate if the driver is aware but intention-
● Driving safely is solely the responsibil-
ally and continuously does not operate
ity of the driver. Pay careful attention
the vehicle. Also, the system may not
to the surrounding conditions in order
operate if it cannot determine that the
to ensure safe driving. The emergency
driver is not responsive, such as if they
driving stop system is designed to pro-
are leaning on the steering wheel.
vide support in an emergency where it
is difficult for the driver to continue
● Situations in which the driver monitor
may not operate properly: P.240
driving, such as if they have had a med-
ical emergency. It is not designed to
support driving while drowsy or in
poor physical health, or inattentive
Summary of the system
driving.
Operation of this system is separated
into 4 control states. Through control
state “warning phase 1” and “warning
phase 2”, the system determines if the
driver is aware and responsive while
outputting a warning and controlling
4-5. Using the driving support systems297the vehicle speed. If the system deter-intermittently and a message will bemines the driver is not responsive, it willdisplayed to warn the driver, and theoperate in control state “decelerationsystem will judge if the driver is respon-stop phase” and “stop hold phase” andsive or not. If driving operations, suchdecelerate and stop the vehicle. It willas holding the steering wheel, are notthen operate continuously in “stop holdperformed within a certain amount ofphase”.time, the system will enter warningphase 2.■ Operating conditionsDepending on the type of detection ofThis system operates when all of the follow-the driver’s unresponsiveness, the sys-ing conditions are met:tem may skip warning phase 1 and start● When the LTA is onthe control of warning phase 2.● When the vehicle speed is approximately50 km/h (30 mph) or moreWarning phase 2■ Operation cancelation conditionsIn the following situations, system operation4After entering warning phase 2, awill be canceled:buzzer will sound in short intervals and● When LTA control has been canceleda message will be displayed to warnDriving(the LTA switch has been pressed, etc.)the driver, and the vehicle will slowly● When the dynamic radar cruise controlhas been canceleddecelerate. If driving operations, such● When driver operations are detectedas holding the steering wheel, are not(the steering wheel is held, the brakeperformed within a certain amount ofpedal, accelerator pedal, parking brake,time, the system will determine that theemergency flasher switch, or turn signallever is operated)driver is not responsive and enter the● When the driving assist switch is presseddeceleration stop in the stop and hold phaseThe audio system will be muted until the● When the power switch has been turneddriver becomes ON to offWhen the vehicle is decelerating, the● Situations in which some or all of thefunctions of the system cannot operate:brake lights may illuminate, d
4-5. Using the driving support systems
297
the vehicle speed. If the system deter-
intermittently and a message will be
mines the driver is not responsive, it will
displayed to warn the driver, and the
operate in control state “deceleration
system will judge if the driver is respon-
stop phase” and “stop hold phase” and
sive or not. If driving operations, such
decelerate and stop the vehicle. It will
as holding the steering wheel, are not
then operate continuously in “stop hold
performed within a certain amount of
phase”.
time, the system will enter warning
phase 2.
■ Operating conditions
Depending on the type of detection of
This system operates when all of the follow-
the driver’s unresponsiveness, the sys-
ing conditions are met:
tem may skip warning phase 1 and start
● When the LTA is on
the control of warning phase 2.
● When the vehicle speed is approximately
50 km/h (30 mph) or more
Warning phase 2
■ Operation cancelation conditions
In the following situations, system operation
4
After entering warning phase 2, a
will be canceled:
buzzer will sound in short intervals and
● When LTA control has been canceled
a message will be displayed to warn
Driving
(the LTA switch has been pressed, etc.)
the driver, and the vehicle will slowly
● When the dynamic radar cruise control
has been canceled
decelerate. If driving operations, such
● When driver operations are detected
as holding the steering wheel, are not
(the steering wheel is held, the brake
performed within a certain amount of
pedal, accelerator pedal, parking brake,
time, the system will determine that the
emergency flasher switch, or turn signal
lever is operated)
driver is not responsive and enter the
● When the driving assist switch is pressed
deceleration stop phase.
while in the stop and hold phase
The audio system will be muted until the
● When the power switch has been turned
driver becomes responsive.
from ON to off
When the vehicle is decelerating, the
● Situations in which some or all of the
functions of the system cannot operate:
brake lights may illuminate, depending on
P.239
the road conditions, etc.
■ LTA control when operation is canceled
After the vehicle has decelerated a certain
When emergency driving stop system
amount, the emergency flashers (hazard
operation is canceled, LTA control may
lights) will flash.
also be canceled.
Deceleration stop phase
Warning phase 1
After the driver is judged as being not
If driving operations are not detected
responsive, a buzzer will sound contin-
after the hands off steering wheel
uously and a message will be displayed
warning operates, a buzzer will sound
2984-5. Using the driving support systemsto warn the driver, and the vehicle willSpeed limiterslowly decelerate and stop. While thevehicle is decelerating, the emergencyA desired maximum speed can beflashers (hazard lights) will flash toset using the speed limiter other drivers of the speed limiter prevents thevehicle speed from exceeding theStop hold phaseset the vehicle is stopped, the park-WARNINGing brake will be applied automatically.■ Situations in which speed limiterAfter entering the stop and hold phase,should not be usedthe buzzer will continue sounding con-● Situations in which the sensors may nottinuously, the emergency flashers (haz-operate properly: P.238ard lights) will flash to warn other● When it is necessary to disable the sys-drivers of the emergency, and thetem: P.233doors will unlock.■ Restricted functions after theSystem Componentsoperation is canceled■ Meter displayAfter shifting to the deceleration stopphase, the following functions will notbe available until the engine isrestarted even though the emergencydriving stop system is canceled: LTA LCA (if equipped)A Set vehicle speedB Speed limiter indicator
298
4-5. Using the driving support systems
to warn the driver, and the vehicle will
Speed limiter
slowly decelerate and stop. While the
vehicle is decelerating, the emergency
A desired maximum speed can be
flashers (hazard lights) will flash to
set using the speed limiter switch.
warn other drivers of the emergency.
The speed limiter prevents the
vehicle speed from exceeding the
Stop hold phase
set speed.
After the vehicle is stopped, the park-
WARNING
ing brake will be applied automatically.
■ Situations in which speed limiter
After entering the stop and hold phase,
should not be used
the buzzer will continue sounding con-
● Situations in which the sensors may not
tinuously, the emergency flashers (haz-
operate properly: P.238
ard lights) will flash to warn other
● When it is necessary to disable the sys-
drivers of the emergency, and the
tem: P.233
doors will unlock.
■ Restricted functions after the
System Components
operation is canceled
■ Meter display
After shifting to the deceleration stop
phase, the following functions will not
be available until the engine is
restarted even though the emergency
driving stop system is canceled:
 LTA
 LCA (if equipped)
A Set vehicle speed
B Speed limiter indicator
4-5. Using the driving support systems299■ SwitchesWhen a switch is touched, the function ofeach switch is displayed on the head-up Vehicles without a head-up displaydisplay. If the head-up display is off, thefunctions will be displayed on the multi-information display.B Driving assist mode select switchC Driving assist switchD “RES” switchE “-” switchF Cancel switchA Driving assist mode select switchG “+” switchB Driving assist switchUsing the speed limiterC “+” switch / “RES” switch4D “-” switch■ Setting the maximum vehiclespeedE Cancel switchDriving1 Press the driving assist mode select Vehicles with a head-up displayswitch to select the speed speed limiter indicator will illuminate inwhite. Vehicles without a head-up displayA The function of each switch differsdepending on the conditions andsettings.
4-5. Using the driving support systems
299
■ Switches
When a switch is touched, the function of
each switch is displayed on the head-up
 Vehicles without a head-up display
display. If the head-up display is off, the
functions will be displayed on the multi-
information display.
B Driving assist mode select switch
C Driving assist switch
D “RES” switch
E “-” switch
F Cancel switch
A Driving assist mode select switch
G “+” switch
B Driving assist switch
Using the speed limiter
C “+” switch / “RES” switch
4
D “-” switch
■ Setting the maximum vehicle
speed
E Cancel switch
Driving
1 Press the driving assist mode select
 Vehicles with a head-up display
switch to select the speed limiter.
The speed limiter indicator will illuminate in
white.
 Vehicles without a head-up display
A The function of each switch differs
depending on the conditions and
settings.
3004-5. Using the driving support systems Vehicles with a head-up display Vehicles with a head-up display2 Accelerate or decelerate to theThe system does not start when the shiftposition is vehicle speed, and pressthe driving assist switch to set theThe system does not start when the drivingmaximum vehicle switch is pressed continuously.■ Adjusting the set vehicle speedThe speed limiter indicator will changefrom illuminated in white to change the set vehicle speed, pressThe set vehicle speed will be displayed onthe “+” or “-” switch until the desiredthe multi-information display in is the vehicle speed is set while driving atbelow approximately 30 km/h (20 mph), Vehicles without a head-up displaythe set vehicle speed will be set to approxi-mately 30 km/h (20 mph).Press the cancel switch or driving assistswitch to cancel control. Vehicles without a head-up display Vehicles with a head-up display1 Increase set vehicle speed
300
4-5. Using the driving support systems
 Vehicles with a head-up display
 Vehicles with a head-up display
2 Accelerate or decelerate to the
The system does not start when the shift
position is R.
desired vehicle speed, and press
the driving assist switch to set the
The system does not start when the driving
maximum vehicle speed.
assist switch is pressed continuously.
■ Adjusting the set vehicle speed
The speed limiter indicator will change
from illuminated in white to green.
To change the set vehicle speed, press
The set vehicle speed will be displayed on
the “+” or “-” switch until the desired
the multi-information display in green.
speed is displayed.
If the vehicle speed is set while driving at
below approximately 30 km/h (20 mph),
 Vehicles without a head-up display
the set vehicle speed will be set to approxi-
mately 30 km/h (20 mph).
Press the cancel switch or driving assist
switch to cancel control.
 Vehicles without a head-up display
 Vehicles with a head-up display
1 Increase set vehicle speed
4-5. Using the driving support systems3012 Decrease set vehicle speed2 Press the “RES” switch to press adjustment: Press the switchLong press adjustment: Press and hold theWhen control is canceled, the speed lim-iter indicator will change from illuminatedswitch until the desired set vehicle speed isin green to set vehicle speed will increase or■ Exceeding the set speeddecrease as follows:In the following situations, if the vehicleShort press adjustment: By 1 km/h (0.6speed exceeds the set vehicle speed, themph) or 1 mph (1.6 km/h) each time thedisplayed set vehicle speed will flash:switch is pressed● When the accelerator pedal is deeplyLong press adjustment: Increases ordepresseddecreases in 5 km/h (3.1 mph) or 5 mph (8● When driving down a slopekm/h) increments continuously while the■ Automatic cancellation of the speedswitch is pressed and heldlimiterThe set vehicle speed adjustment incre-● Situations in which some or all of thement can be changed through a customizefunctions of the system cannot operate:P.2394setting.■ Changes in brake operation sound and■ Canceling/resuming controlpedal responseDriving1 Press the cancel switch or drivingP.239assist switch to cancel control. Vehicles without a head-up displaySpeed limiter with Road SignAssistWhen RSA function is enabled and thespeed limiter is operating, if a speedlimit sign is detected, the detectedspeed limit will be displayed with anup/down arrow. The set vehicle speedcan be increased/reduced to thedetected speed limit by pressing and Vehicles with a head-up displayholding the “+” or “-” switch.
4-5. Using the driving support systems
301
2 Decrease set vehicle speed
2 Press the “RES” switch to resume
control.
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
When control is canceled, the speed lim-
iter indicator will change from illuminated
switch until the desired set vehicle speed is
in green to white.
reached.
The set vehicle speed will increase or
■ Exceeding the set speed
decrease as follows:
In the following situations, if the vehicle
Short press adjustment: By 1 km/h (0.6
speed exceeds the set vehicle speed, the
mph) or 1 mph (1.6 km/h) each time the
displayed set vehicle speed will flash:
switch is pressed
● When the accelerator pedal is deeply
Long press adjustment: Increases or
depressed
decreases in 5 km/h (3.1 mph) or 5 mph (8
● When driving down a slope
km/h) increments continuously while the
■ Automatic cancellation of the speed
switch is pressed and held
limiter
The set vehicle speed adjustment incre-
● Situations in which some or all of the
ment can be changed through a customize
functions of the system cannot operate:
P.239
4
setting.
■ Changes in brake operation sound and
■ Canceling/resuming control
pedal response
Driving
1 Press the cancel switch or driving
P.239
assist switch to cancel control.
 Vehicles without a head-up display
Speed limiter with Road Sign
Assist
When RSA function is enabled and the
speed limiter is operating, if a speed
limit sign is detected, the detected
speed limit will be displayed with an
up/down arrow. The set vehicle speed
can be increased/reduced to the
detected speed limit by pressing and
 Vehicles with a head-up display
holding the “+” or “-” switch.
3024-5. Using the driving support systems■ When the set vehicle speed is Vehicles with a head-up displaylower than the detected speedlimit Vehicles without a head-up displayPress and hold the “-” switch.■ The speed limiter with road sign assistmay not operate properly when Vehicles with a head-up displayAs the speed limiter with road sign assistmay not operate properly in situationswhere the RSA may not operate or cannotdetect signs correctly (P.275), whenusing this function, make sure to confirm theactual speed the following situations, the set speedmay not change to the detected speed limitby pressing and holding the “+” switch or “-”switch:● When the detected speed limit is thesame as the set speedPress and hold the “+” switch.● When the detected speed limit is outsideof the speed range which the speed lim-■ When the set vehicle speed isiter system can operatehigher than the detected speedlimit Vehicles without a head-up display
302
4-5. Using the driving support systems
■ When the set vehicle speed is
 Vehicles with a head-up display
lower than the detected speed
limit
 Vehicles without a head-up display
Press and hold the “-” switch.
■ The speed limiter with road sign assist
may not operate properly when
 Vehicles with a head-up display
As the speed limiter with road sign assist
may not operate properly in situations
where the RSA may not operate or cannot
detect signs correctly (P.275), when
using this function, make sure to confirm the
actual speed limit.
In the following situations, the set speed
may not change to the detected speed limit
by pressing and holding the “+” switch or “-”
switch:
● When the detected speed limit is the
same as the set speed
Press and hold the “+” switch.
● When the detected speed limit is outside
of the speed range which the speed lim-
■ When the set vehicle speed is
iter system can operate
higher than the detected speed
limit
 Vehicles without a head-up display
4-5. Using the driving support systems303A Center DisplayBSM (Blind Spot Monitor) *Turning the Blind Spot Monitor on/off.* : If equippedB Outside rear view mirror indicatorsThe Blind Spot Monitor is a systemWhen a vehicle is detected in a blind spotthat uses rear side radar sensorsof the outside rear view mirrors orapproaching rapidly from behind into ainstalled on the inner side of theblind spot, the outside rear view mirrorrear bumper on the left and rightindicator (P.95) on the detected sideside to assist the driver in confirm-will illuminate. If the turn signal lever ising safety when changing toward the detected side, theoutside rear view mirror indicator will flashWARNINGand a buzzer will sound.■ Cautions regarding the use of theC Driving assist information indicatorsystemIlluminates when the Blind Spot Monitor is● The driver is solely responsible for safedriving. Always drive safely, takingturned off. At this time, a message will becare to observe your surroundings.4displayed on the multi-information display.● The Blind Spot Monitor is a supple-■ Outside rear view mirror indicator visi-mentary function which alerts theDrivingbilitydriver that a vehicle is in a blind spot ofthe outside rear view mirrors or isIn strong sunlight, the outside rear view mir-approaching rapidly from behind intoror indicator may be difficult to see.a blind spot. Do not overly rely on the■ BuzzerBlind Spot Monitor. As the functioncannot judge if it is safe to changeIf the volume setting of the audio system islanes, over reliance could lead to anhigh or the surrounding area is loud, it mayaccident resulting in death or seriousbe difficult to hear the . As the system may not function■ Customizationcorrectly under certain conditions, thedriver’s own visual confirmation ofSome functions can be is necessary.(P.556)WARNINGSystem components■ To ensure the system can operateproperlyBlind Spot Monitor sensors are installedbehind the left and rig
4-5. Using the driving support systems
303
A Center Display
BSM (Blind Spot Monitor) *
Turning the Blind Spot Monitor on/off.
* : If equipped
B Outside rear view mirror indicators
The Blind Spot Monitor is a system
When a vehicle is detected in a blind spot
that uses rear side radar sensors
of the outside rear view mirrors or
approaching rapidly from behind into a
installed on the inner side of the
blind spot, the outside rear view mirror
rear bumper on the left and right
indicator (P.95) on the detected side
side to assist the driver in confirm-
will illuminate. If the turn signal lever is
ing safety when changing lanes.
operated toward the detected side, the
outside rear view mirror indicator will flash
WARNING
and a buzzer will sound.
■ Cautions regarding the use of the
C Driving assist information indicator
system
Illuminates when the Blind Spot Monitor is
● The driver is solely responsible for safe
driving. Always drive safely, taking
turned off. At this time, a message will be
care to observe your surroundings.
4
displayed on the multi-information display.
● The Blind Spot Monitor is a supple-
■ Outside rear view mirror indicator visi-
mentary function which alerts the
Driving
bility
driver that a vehicle is in a blind spot of
the outside rear view mirrors or is
In strong sunlight, the outside rear view mir-
approaching rapidly from behind into
ror indicator may be difficult to see.
a blind spot. Do not overly rely on the
■ Buzzer
Blind Spot Monitor. As the function
cannot judge if it is safe to change
If the volume setting of the audio system is
lanes, over reliance could lead to an
high or the surrounding area is loud, it may
accident resulting in death or serious
be difficult to hear the buzzer.
injury. As the system may not function
■ Customization
correctly under certain conditions, the
driver’s own visual confirmation of
Some functions can be customized.
safety is necessary.
(P.556)
WARNING
System components
■ To ensure the system can operate
properly
Blind Spot Monitor sensors are installed
behind the left and right sides of the rear
bumper respectively. Observe the fol-
lowing to ensure the Blind Spot Monitor
can operate correctly.
3044-5. Using the driving support systems• If the surrounding area of a sensor isWARNINGscratched or dented, or part of them● Keep the sensors and the surroundinghas become on the rear bumper clean at alltimes.● Do not disassemble the a sensor or its surrounding area on● Do not modify the sensor or surround-the rear bumper is dirty or covereding area on the rear snow, the Blind Spot Monitor maynot operate and a warning message● If a sensor or the rear bumper needs towill be displayed. In this situation, clearbe removed/installed or replaced,off the dirt or snow and drive the vehi-contact any authorized Lexus retailercle with the operation conditions of theor Lexus authorized repairer, or anyBSM function (P.306) satisfied forreliable 10 minutes. If the warn-ing message does not disappear, have● The sensors are likely to be affected bythe vehicle inspected by any autho-paint on the rear bumper. If the rearrized Lexus retailer or Lexus autho-bumper is not repaired correctly, therized repairer, or any reliable Spot Monitor may not operatewith a warning message displayed. Ifany paint repair is needed, contact anyauthorized Lexus retailer or Lexusauthorized repairer, or any the Blind Spot Monitoron/off● Do not attach accessories, stickers(including transparent stickers), alumi-The Blind Spot Monitor can benum tape, etc. to a sensor or its sur-enabled/disabled through a custom-rounding area on the rear setting. (P.556)● Do not paint the surrounding area of aWhen the Blind Spot Monitor is off, thesensor on the rear assist information indicator● Do not subject a sensor or its sur-(P.95) will illuminate and a messagerounding area on the rear bumper to astrong be displayed on the multi-informa-If a sensor is moved even slightly offtion , the system may malfunctionand vehicles may not be detected cor-Each time the power
304
4-5. Using the driving support systems
• If the surrounding area of a sensor is
WARNING
scratched or dented, or part of them
● Keep the sensors and the surrounding
has become disconnected.
areas on the rear bumper clean at all
times.
● Do not disassemble the sensor.
If a sensor or its surrounding area on
● Do not modify the sensor or surround-
the rear bumper is dirty or covered
ing area on the rear bumper.
with snow, the Blind Spot Monitor may
not operate and a warning message
● If a sensor or the rear bumper needs to
will be displayed. In this situation, clear
be removed/installed or replaced,
off the dirt or snow and drive the vehi-
contact any authorized Lexus retailer
cle with the operation conditions of the
or Lexus authorized repairer, or any
BSM function (P.306) satisfied for
reliable repairer.
approximately 10 minutes. If the warn-
ing message does not disappear, have
● The sensors are likely to be affected by
the vehicle inspected by any autho-
paint on the rear bumper. If the rear
rized Lexus retailer or Lexus autho-
bumper is not repaired correctly, the
rized repairer, or any reliable repairer.
Blind Spot Monitor may not operate
with a warning message displayed. If
any paint repair is needed, contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
Turning the Blind Spot Monitor
on/off
● Do not attach accessories, stickers
(including transparent stickers), alumi-
The Blind Spot Monitor can be
num tape, etc. to a sensor or its sur-
enabled/disabled through a custom-
rounding area on the rear bumper.
ize setting. (P.556)
● Do not paint the surrounding area of a
When the Blind Spot Monitor is off, the
sensor on the rear bumper.
driving assist information indicator
● Do not subject a sensor or its sur-
(P.95) will illuminate and a message
rounding area on the rear bumper to a
strong impact.
will be displayed on the multi-informa-
If a sensor is moved even slightly off
tion display.
position, the system may malfunction
and vehicles may not be detected cor-
Each time the power switch is turned to
rectly.
ON, the Blind Spot Monitor is enabled.
In the following situations, have your
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
• A sensor or its surrounding area is
subject to a strong impact.
4-5. Using the driving support systems305Blind Spot Monitor operation■ Objects that can be detected while drivingThe Blind Spot Monitor uses rear side radar sensors to detect the following vehi-cles traveling in adjacent lanes and advises the driver of the presence of such vehi-cles via the indicators on the outside rear view mirrors.4A Vehicles that are traveling in areas that are not visible using the outside rearview mirrors (the blind spots)DrivingB Vehicles that are approaching rapidly from behind in areas that are not visibleusing the outside rear view mirrors (the blind spots)■ Detection range while drivingThe areas that vehicles can be detected in are outlined range of each detection area is:A Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle *1B Approximately 1 m (3.3 ft.) forward of the rear bumper *2C Approximately 3 m (9.8 ft.) from the rear bumperD Approximately 3 m (9.8 ft.) to 70 m (230 ft.) from the rear bumper *3*1: The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the vehicle
4-5. Using the driving support systems
305
Blind Spot Monitor operation
■ Objects that can be detected while driving
The Blind Spot Monitor uses rear side radar sensors to detect the following vehi-
cles traveling in adjacent lanes and advises the driver of the presence of such vehi-
cles via the indicators on the outside rear view mirrors.
4
A Vehicles that are traveling in areas that are not visible using the outside rear
view mirrors (the blind spots)
Driving
B Vehicles that are approaching rapidly from behind in areas that are not visible
using the outside rear view mirrors (the blind spots)
■ Detection range while driving
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
A Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle *1
B Approximately 1 m (3.3 ft.) forward of the rear bumper *2
C Approximately 3 m (9.8 ft.) from the rear bumper
D Approximately 3 m (9.8 ft.) to 70 m (230 ft.) from the rear bumper *3
*1
: The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the vehicle
3064-5. Using the driving support systemscannot be detected.*2: While the vehicle is to being overtaken, up to approximately 3 m (9.8 ft.) forward of therear bumper will be detected.*3 : The greater the difference in speed between your vehicle and the detected vehicle is,the farther away the vehicle will be detected, causing the outside rear view mirror indi-cator to illuminate or flash.■ The Blind Spot Monitor linkedetc. *function● Vehicles traveling in the opposite direc-tionThe LDA (Lane Departure Alert) has a● Guardrails, walls, signs, parked vehiclesfunction that uses information ofand similar stationary objects *detected vehicles driving in an adja-● Following vehicles that are in the samecent lane. For details about the func-lane *tion and its operating conditions,● Vehicles traveling 2 lanes away fromP.261.your vehicle *● Vehicles which are being overtaken rap-■ The Blind Spot Monitor is operationalidly by your vehicle *when*: Depending on the conditions, detectionThe Blind Spot Monitor is operational whenall of the following conditions are met:of a vehicle and/or object may occur.● The power switch is in ON.■ Conditions in which a buzzer may notsound● The Blind Spot Monitor is situations such as the following, while the● The shift position is in a position otherturn signal lever is being operated, the indi-than will flash but a buzzer may not sound.● The vehicle speed is approximately 10● When a second vehicle is detected whilekm/h (7 mph) or turn signal lever is being held■ The Blind Spot Monitor will detect a● When overtaking a vehicle in the adja-vehicle whencent lane at a much higher speed than it *The Blind Spot Monitor will detect a vehicle*present in the detection area in the follow-: Depending on the situations, a buzzering situations:may sound.● A vehicle in an adjacent lane overtakes■ Conditions under which the system mayyour function correctly● You overtake a vehicle in an adjacent● The Blind Spot Monitor may no
306
4-5. Using the driving support systems
cannot be detected.
*2
: While the vehicle is to being overtaken, up to approximately 3 m (9.8 ft.) forward of the
rear bumper will be detected.
*3 : The greater the difference in speed between your vehicle and the detected vehicle is,
the farther away the vehicle will be detected, causing the outside rear view mirror indi-
cator to illuminate or flash.
■ The Blind Spot Monitor linked
etc. *
function
● Vehicles traveling in the opposite direc-
tion
The LDA (Lane Departure Alert) has a
● Guardrails, walls, signs, parked vehicles
function that uses information of
and similar stationary objects *
detected vehicles driving in an adja-
● Following vehicles that are in the same
cent lane. For details about the func-
lane *
tion and its operating conditions,
● Vehicles traveling 2 lanes away from
P.261.
your vehicle *
● Vehicles which are being overtaken rap-
■ The Blind Spot Monitor is operational
idly by your vehicle *
when
*
: Depending on the conditions, detection
The Blind Spot Monitor is operational when
all of the following conditions are met:
of a vehicle and/or object may occur.
● The power switch is in ON.
■ Conditions in which a buzzer may not
sound
● The Blind Spot Monitor is on.
In situations such as the following, while the
● The shift position is in a position other
turn signal lever is being operated, the indi-
than R.
cator will flash but a buzzer may not sound.
● The vehicle speed is approximately 10
● When a second vehicle is detected while
km/h (7 mph) or more.
the turn signal lever is being held
■ The Blind Spot Monitor will detect a
● When overtaking a vehicle in the adja-
vehicle when
cent lane at a much higher speed than it *
The Blind Spot Monitor will detect a vehicle
*
present in the detection area in the follow-
: Depending on the situations, a buzzer
ing situations:
may sound.
● A vehicle in an adjacent lane overtakes
■ Conditions under which the system may
your vehicle.
not function correctly
● You overtake a vehicle in an adjacent
● The Blind Spot Monitor may not detect
lane slowly.
vehicles correctly in the following situa-
● Another vehicle enters the detection
tions:
area when it changes lanes.
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
■ Situations in which the Blind Spot Moni-
rounding area
tor cannot detect vehicles
• When mud, snow, ice, a sticker, etc. is
The Blind Spot Monitor cannot detect the
covering the sensor or surrounding area
following vehicles and other objects:
on the rear bumper
• When driving on a wet road surface, such
● Small motorcycles, bicycles, pedestrians,
4-5. Using the driving support systems307as in a puddle, while in inclementcle traveling in a lane other than the adja-weather, such as heavy rain, snow, fog,cent lanes enters the detection areaetc.• When driving on roads with sharp bends,• When multiple vehicles are approachingconsecutive curves, or uneven surfaceswith only a small gap between each vehi-• When the tires are slipping or spinningcle• When the distance between your vehicle• When the distance between your vehicleand a following vehicle is shortand a following vehicle is short• When an accessory (such as a bicycle• When there is a significant difference incarrier) is installed to the rear of the vehi-speed between your vehicle and theclevehicle that enters the detection area• When towing with the vehicle• When the difference in speed betweenyour vehicle and another vehicle ischanging• When a vehicle enters a detection areatraveling at about the same speed as yourvehicle• As your vehicle starts from a stop, a vehi-cle remains in the detection area• When driving up and down consecutivesteep inclines, such as hills, dips in the4road, etc.• When driving on roads with sharp bends,consecutive curves, or uneven surfacesDriving• When vehicle lanes are wide, or whendriving on the edge of a lane, and thevehicle in an adjacent lane is far awayfrom your vehicle• When an accessory (such as a bicyclecarrier) is installed to the rear of the vehi-cle• When there is a significant difference inheight between your vehicle and thevehicle that enters the detection area• Immediately after the Blind Spot Monitoris turned on• When towing with the vehicle● Instances of the Blind Spot Monitorunnecessarily detecting a vehicle and/orobject may increase in the following situ-ations:• When the sensor is misaligned due to astrong impact to the sensor or its sur-rounding area• When the distance between your vehicleand a guardrail, wall, etc. that enters thedetection area is short• When driving up and down consecutivesteep inclines, su
4-5. Using the driving support systems
307
as in a puddle, while in inclement
cle traveling in a lane other than the adja-
weather, such as heavy rain, snow, fog,
cent lanes enters the detection area
etc.
• When driving on roads with sharp bends,
• When multiple vehicles are approaching
consecutive curves, or uneven surfaces
with only a small gap between each vehi-
• When the tires are slipping or spinning
cle
• When the distance between your vehicle
• When the distance between your vehicle
and a following vehicle is short
and a following vehicle is short
• When an accessory (such as a bicycle
• When there is a significant difference in
carrier) is installed to the rear of the vehi-
speed between your vehicle and the
cle
vehicle that enters the detection area
• When towing with the vehicle
• When the difference in speed between
your vehicle and another vehicle is
changing
• When a vehicle enters a detection area
traveling at about the same speed as your
vehicle
• As your vehicle starts from a stop, a vehi-
cle remains in the detection area
• When driving up and down consecutive
steep inclines, such as hills, dips in the
4
road, etc.
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
Driving
• When vehicle lanes are wide, or when
driving on the edge of a lane, and the
vehicle in an adjacent lane is far away
from your vehicle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
• When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
• Immediately after the Blind Spot Monitor
is turned on
• When towing with the vehicle
● Instances of the Blind Spot Monitor
unnecessarily detecting a vehicle and/or
object may increase in the following situ-
ations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When the distance between your vehicle
and a guardrail, wall, etc. that enters the
detection area is short
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When vehicle lanes are narrow, or when
driving on the edge of a lane, and a vehi-
3084-5. Using the driving support systemsRear Vehicle ApproachingSystem componentsIndication **: If equippedThe rear vehicle approaching indi-cation is a system that uses radarsensors installed on the inner sideof the rear bumper. By notifying thedriver of a vehicle approachingbehind your vehicle, the systemassists the driver in judging whetherA Multi-information display/head-upor not an evasive action should bedisplay (if equipped) through message and buzzerwhen your vehicle may obstruct the pass-WARNINGing of the vehicle behind you.■ Cautions regarding the use of theB Center DisplaysystemTurning the Rear Vehicle ApproachingThe driver is solely responsible for safeIndication on/. Always drive safely, taking careto observe your the Rear VehicleThe rear vehicle approaching indicationis a supplementary system that informsApproaching Indication on/offthe driver of the existence of a vehicleapproaching behind your Rear Vehicle Approaching Indica-As this system may not function to its full-tion can be enabled/disabled throughest extent in certain situations, thedriver’s own visual confirmation of safetya customize setting. (P.556)is reliance on this function may lead■ Buzzerto an accident resulting death or seriousIf the volume setting of the audio system or the surrounding area is loud, it maybe difficult to hear the buzzer.■ To ensure the system can operateproperly■ CustomizationP.303Some functions can be customized.(P.556)Rear Vehicle Approaching Indi-cation operationOn detecting a vehicle approachingbehind your vehicle using the rear side
308
4-5. Using the driving support systems
Rear Vehicle Approaching
System components
Indication *
*
: If equipped
The rear vehicle approaching indi-
cation is a system that uses radar
sensors installed on the inner side
of the rear bumper. By notifying the
driver of a vehicle approaching
behind your vehicle, the system
assists the driver in judging whether
A Multi-information display/head-up
or not an evasive action should be
display (if equipped)
taken.
Notifies through message and buzzer
when your vehicle may obstruct the pass-
WARNING
ing of the vehicle behind you.
■ Cautions regarding the use of the
B Center Display
system
Turning the Rear Vehicle Approaching
The driver is solely responsible for safe
Indication on/off.
driving. Always drive safely, taking care
to observe your surroundings.
Turning the Rear Vehicle
The rear vehicle approaching indication
is a supplementary system that informs
Approaching Indication on/off
the driver of the existence of a vehicle
approaching behind your vehicle.
The Rear Vehicle Approaching Indica-
As this system may not function to its full-
tion can be enabled/disabled through
est extent in certain situations, the
driver’s own visual confirmation of safety
a customize setting. (P.556)
is necessary.
Over reliance on this function may lead
■ Buzzer
to an accident resulting death or serious
If the volume setting of the audio system is
injury.
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ To ensure the system can operate
properly
■ Customization
P.303
Some functions can be customized.
(P.556)
Rear Vehicle Approaching Indi-
cation operation
On detecting a vehicle approaching
behind your vehicle using the rear side
4-5. Using the driving support systems309radar sensors, the rear vehicle■ The Rear Vehicle Approaching Indica-tion will detect a vehicle whenapproaching indication notifies theThe rear vehicle approaching indicationdriver of the existence of the vehicledetects vehicles within the detection rangethrough a message on the multi-infor-when a following vehicle driving in the samemation display or head-up display (iflane is ), and a buzzer.■ Situations in which the Rear VehicleApproaching Indication cannot detectvehiclesThe Rear Vehicle Approaching Indicationcannot detect the following vehicles andother objects:● Small motorcycles, bicycles, pedestrians,etc. *● Guardrails, walls, signs, parked vehiclesand similar stationary objects *● Vehicles traveling in the opposite direc-tion4● A vehicle in an adjacent lane **: Depending on the conditions, detectionDrivingof a vehicle and/or object may occur.■ Situations in which the Rear VehicleApproaching Indication may not oper-ate properly● In the following situations, the system maynot detect a following vehicle properly:• When the sensor is misaligned due to a■ Operating conditions of Rear Vehiclestrong impact to the sensor or its sur-Approaching Indicationrounding areaWhen the following conditions are met, the• When mud, snow, ice, a sticker, etc. isRear Vehicle Approaching Indication willcovering the sensor or surrounding areaoperate:on the rear bumper● The power switch is in ON.• When driving on a wet road surface, suchas in a puddle, while in inclement● The Rear Vehicle Approaching Indica-weather, such as heavy rain, snow, fog,tion is .● The shift position is in a position other• When driving up and down consecutivethan inclines, such as hills, dips in theroad, etc.● The vehicle speed is approximately 100• When towing with the vehiclekm/h (63mph) or more.• When the following vehicle is not● The turn signal lever is not being oper-approaching from straight behind ● The brake p
4-5. Using the driving support systems
309
radar sensors, the rear vehicle
■ The Rear Vehicle Approaching Indica-
tion will detect a vehicle when
approaching indication notifies the
The rear vehicle approaching indication
driver of the existence of the vehicle
detects vehicles within the detection range
through a message on the multi-infor-
when a following vehicle driving in the same
mation display or head-up display (if
lane is approaching.
equipped), and a buzzer.
■ Situations in which the Rear Vehicle
Approaching Indication cannot detect
vehicles
The Rear Vehicle Approaching Indication
cannot detect the following vehicles and
other objects:
● Small motorcycles, bicycles, pedestrians,
etc. *
● Guardrails, walls, signs, parked vehicles
and similar stationary objects *
● Vehicles traveling in the opposite direc-
tion
4
● A vehicle in an adjacent lane *
*
: Depending on the conditions, detection
Driving
of a vehicle and/or object may occur.
■ Situations in which the Rear Vehicle
Approaching Indication may not oper-
ate properly
● In the following situations, the system may
not detect a following vehicle properly:
• When the sensor is misaligned due to a
■ Operating conditions of Rear Vehicle
strong impact to the sensor or its sur-
Approaching Indication
rounding area
When the following conditions are met, the
• When mud, snow, ice, a sticker, etc. is
Rear Vehicle Approaching Indication will
covering the sensor or surrounding area
operate:
on the rear bumper
● The power switch is in ON.
• When driving on a wet road surface, such
as in a puddle, while in inclement
● The Rear Vehicle Approaching Indica-
weather, such as heavy rain, snow, fog,
tion is on.
etc.
● The shift position is in a position other
• When driving up and down consecutive
than R.
steep inclines, such as hills, dips in the
road, etc.
● The vehicle speed is approximately 100
• When towing with the vehicle
km/h (63mph) or more.
• When the following vehicle is not
● The turn signal lever is not being oper-
approaching from straight behind your
ated.
vehicle
● The brake pedal is not depressed.
• When the following vehicle is approach-
ing from an angle
● Approximately 5 or more minutes have
• If a vehicle suddenly cuts behind your
elapsed since the system was operated.
vehicle
3104-5. Using the driving support systems• When your vehicle cuts in front ofAutomatic Rear Flashinganother vehicleHazard Lights *• When the following vehicle is sur-rounded by other vehicles• When there is a static object, such as a*: If equippedguardrail or wall, around a following vehi-cleThe Automatic Rear Flashing Haz-• When a following vehicle, whichard Lights is a system that uses theapproached your vehicle then movedaway, is approaching againrear side radar sensors located on• When a following vehicle is moving awaythe inside of the rear your vehicleWhen the system determines that• When a following vehicle is overtakingyour vehiclethe possibility of a rear-end colli-• When driving on roads with sharp bends,sion is high, it flashes the emer-consecutive curves, or uneven surfacesgency flashers rapidly to warn the• When the height of a following vehicle istoo much different from that of your vehi-driver of the following ● Especially in situations such as the follow-WARNINGing, the system may operate even if it is■ Cautions regarding the use of theunlikely for a following vehicle toapproach your vehicle:system• When the sensor is misaligned due to aThe driver is solely responsible for safestrong impact to the sensor or its sur-driving. Always drive safely, taking carerounding areato observe your surroundings. The Auto-• When towing with the vehiclematic Rear Flashing Hazard Lights is an• When your vehicle is surrounded byauxiliary system that flashes the emer-other vehiclesgency flashers rapidly to warn the driver• When making a left/right turn and a fol-of the following vehicle when it deter-lowing vehicle passes immediatelymines that the possibility of a rear-endbehind your vehiclecollision is high. As this system may not• When a following vehicle closelyfunction to its fullest extent in certain situ-approaches your vehicle before overtak-ations, the driver’s own visual confirma-ingtion of safety is necessary. Over reliance• When a vehic
310
4-5. Using the driving support systems
• When your vehicle cuts in front of
Automatic Rear Flashing
another vehicle
Hazard Lights *
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
*
: If equipped
guardrail or wall, around a following vehi-
cle
The Automatic Rear Flashing Haz-
• When a following vehicle, which
ard Lights is a system that uses the
approached your vehicle then moved
away, is approaching again
rear side radar sensors located on
• When a following vehicle is moving away
the inside of the rear bumper.
from your vehicle
When the system determines that
• When a following vehicle is overtaking
your vehicle
the possibility of a rear-end colli-
• When driving on roads with sharp bends,
sion is high, it flashes the emer-
consecutive curves, or uneven surfaces
gency flashers rapidly to warn the
• When the height of a following vehicle is
too much different from that of your vehi-
driver of the following vehicle.
cle
● Especially in situations such as the follow-
WARNING
ing, the system may operate even if it is
■ Cautions regarding the use of the
unlikely for a following vehicle to
approach your vehicle:
system
• When the sensor is misaligned due to a
The driver is solely responsible for safe
strong impact to the sensor or its sur-
driving. Always drive safely, taking care
rounding area
to observe your surroundings. The Auto-
• When towing with the vehicle
matic Rear Flashing Hazard Lights is an
• When your vehicle is surrounded by
auxiliary system that flashes the emer-
other vehicles
gency flashers rapidly to warn the driver
• When making a left/right turn and a fol-
of the following vehicle when it deter-
lowing vehicle passes immediately
mines that the possibility of a rear-end
behind your vehicle
collision is high. As this system may not
• When a following vehicle closely
function to its fullest extent in certain situ-
approaches your vehicle before overtak-
ations, the driver’s own visual confirma-
ing
tion of safety is necessary. Over reliance
• When a vehicle driving in an adjacent
on this function may lead to an accident
lane is within the detection range, such as
resulting death or serious injury.
when your vehicle is driving on a narrow
lane road or driving on the edge of a lane
■ To ensure the system can operate
• When there are more than one vehicle
properly
around a following vehicle
P.303
• When passing through a location with a
structure above the road (traffic sign, bill-
board, etc.)
Automatic Rear Flashing Haz-
• When there is a static object, such as a
ard Lights operation
guardrail or wall, around a following vehi-
cle
• When there is an adjacent vehicle while
The rear side radar sensors detect fol-
on a curve
lowing vehicles driving in the same
• When your vehicle cuts in front of
lane. If the system determines that the
another vehicle
possibility of a rear-end collision is
4-5. Using the driving support systems311high, the emergency flashers will flash■ The Automatic Rear Flashing HazardLights will detect a vehicle whenrapidly to warn the driver of the follow-The Automatic Rear Flashing Hazarding vehicle. Simultaneously, a messageLights detects the following vehicle drivingwill be displayed on the multi-informa-in the same lane within the detection range,tion display to notify the driver of thewhen it determines that the possibility of arear-end collision with it is of the following vehicle.■ Situations in which the Automatic RearFlashing Hazard Lights cannot detectvehiclesThe Automatic Rear Flashing HazardLights cannot detect the following vehiclesand other objects:● Small motorcycles, bicycles, pedestrians,etc. *● Guardrails, walls, signs, parked vehiclesand similar stationary objects *● Vehicles traveling in the opposite direc-4tion● A vehicle in an adjacent lane *Driving*: Depending on the conditions, detectionof a vehicle and/or object may occur.■ Situations in which the Automatic RearFlashing Hazard Lights may not operateproperly● In the following situations, the system maynot detect a following vehicle properly:■ Operating conditions of Automatic• When the sensor is misaligned due to aRear Flashing Hazard Lightsstrong impact to the sensor or its sur-When the following conditions are met, therounding areaAutomatic Rear Flashing Hazard Lights will• When mud, snow, ice, a sticker, etc. isoperate:covering the sensor or surrounding area● The power switch is in the rear bumper• When the vehicle is stopped or driving on● The shift position is in a position othera wet road surface, such as in a puddle,than in inclement weather, such as heavy● The turn signal lever is not being oper-rain, snow, fog, .• When driving up and down consecutivesteep inclines, such as hills, dips in the● The relative speed between your vehicleroad, the following vehicle is between• When towing with the vehicleapproxi
4-5. Using the driving support systems
311
high, the emergency flashers will flash
■ The Automatic Rear Flashing Hazard
Lights will detect a vehicle when
rapidly to warn the driver of the follow-
The Automatic Rear Flashing Hazard
ing vehicle. Simultaneously, a message
Lights detects the following vehicle driving
will be displayed on the multi-informa-
in the same lane within the detection range,
tion display to notify the driver of the
when it determines that the possibility of a
rear-end collision with it is high.
approach of the following vehicle.
■ Situations in which the Automatic Rear
Flashing Hazard Lights cannot detect
vehicles
The Automatic Rear Flashing Hazard
Lights cannot detect the following vehicles
and other objects:
● Small motorcycles, bicycles, pedestrians,
etc. *
● Guardrails, walls, signs, parked vehicles
and similar stationary objects *
● Vehicles traveling in the opposite direc-
4
tion
● A vehicle in an adjacent lane *
Driving
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the Automatic Rear
Flashing Hazard Lights may not operate
properly
● In the following situations, the system may
not detect a following vehicle properly:
■ Operating conditions of Automatic
• When the sensor is misaligned due to a
Rear Flashing Hazard Lights
strong impact to the sensor or its sur-
When the following conditions are met, the
rounding area
Automatic Rear Flashing Hazard Lights will
• When mud, snow, ice, a sticker, etc. is
operate:
covering the sensor or surrounding area
● The power switch is in ON.
on the rear bumper
• When the vehicle is stopped or driving on
● The shift position is in a position other
a wet road surface, such as in a puddle,
than R.
while in inclement weather, such as heavy
● The turn signal lever is not being oper-
rain, snow, fog, etc.
ated.
• When driving up and down consecutive
steep inclines, such as hills, dips in the
● The relative speed between your vehicle
road, etc.
and the following vehicle is between
• When towing with the vehicle
approximately 30 and 100 km/h (19 and
• When the following vehicle is not
62 mph)
approaching from straight behind your
● Your vehicle is being driven at approxi-
vehicle
mately 10 km/h (7 mph) or less or at any
• When the following vehicle is approach-
speed with the brake pedal depressed.
ing from an angle
• If a vehicle suddenly cuts behind your
3124-5. Using the driving support systemsvehicleSecondary Collision Brake• When the following vehicle is sur-(Rear Impacts whilerounded by other vehicles• When there is a static object, such as aStopped) *guardrail or wall, around a following vehi-cle*• When a bicycle carrier or other acces-: If equippedsory is installed to the rear of your vehicleThe Secondary Collision Brake• When the height of a following vehicle istoo much different from that of your vehi-(Rear Impacts while Stopped) is aclesystem that uses the rear side radar● In the following situations, the system maysensors located on the inside of theoperate even though there is no possibil-rear bumper. When the systemity of a collision• When the sensor is misaligned due to adetermines that the possibility of astrong impact to the sensor or its sur-rear-end collision while the vehiclerounding areais stopped is very high, the brakes• When towing with the vehicle• When your vehicle is surrounded byare controlled automatically toother vehicleshelp reduce the possibility of fur-• When your vehicle is stopped to make ather damage due to a secondaryturn at an intersection, etc. and a vehiclepasses your vehicle from straight behindcollision.• When your vehicle is stopped on theroadside, etc. and a vehicle passes closeWARNINGto the side of your vehicle• When a following vehicle closely■ Cautions regarding the use of theapproaches your vehicle before overtak-systemingThe driver is solely responsible for safe• When a following vehicle suddenlydriving. Always drive safely, taking careapproaches to close to your vehicleto observe your surroundings. The Sec-• When there is a static object, such as aondary Collision Brake (Rear Impactsguardrail or wall, around a following vehi-while Stopped) is an auxiliary system thatclecontrols the brakes automatically when itdetermines that the possibility of a rear-end collision with the following vehicledriving in the same lane is very high whilethe vehicle is stopped. As the Second
312
4-5. Using the driving support systems
vehicle
Secondary Collision Brake
• When the following vehicle is sur-
(Rear Impacts while
rounded by other vehicles
• When there is a static object, such as a
Stopped) *
guardrail or wall, around a following vehi-
cle
*
• When a bicycle carrier or other acces-
: If equipped
sory is installed to the rear of your vehicle
The Secondary Collision Brake
• When the height of a following vehicle is
too much different from that of your vehi-
(Rear Impacts while Stopped) is a
cle
system that uses the rear side radar
● In the following situations, the system may
sensors located on the inside of the
operate even though there is no possibil-
rear bumper. When the system
ity of a collision
• When the sensor is misaligned due to a
determines that the possibility of a
strong impact to the sensor or its sur-
rear-end collision while the vehicle
rounding area
is stopped is very high, the brakes
• When towing with the vehicle
• When your vehicle is surrounded by
are controlled automatically to
other vehicles
help reduce the possibility of fur-
• When your vehicle is stopped to make a
ther damage due to a secondary
turn at an intersection, etc. and a vehicle
passes your vehicle from straight behind
collision.
• When your vehicle is stopped on the
roadside, etc. and a vehicle passes close
WARNING
to the side of your vehicle
• When a following vehicle closely
■ Cautions regarding the use of the
approaches your vehicle before overtak-
system
ing
The driver is solely responsible for safe
• When a following vehicle suddenly
driving. Always drive safely, taking care
approaches to close to your vehicle
to observe your surroundings. The Sec-
• When there is a static object, such as a
ondary Collision Brake (Rear Impacts
guardrail or wall, around a following vehi-
while Stopped) is an auxiliary system that
cle
controls the brakes automatically when it
determines that the possibility of a rear-
end collision with the following vehicle
driving in the same lane is very high while
the vehicle is stopped. As the Secondary
Collision Brake (Rear Impacts while
Stopped) may not function to its fullest
extent in certain situations, the driver’s
own visual confirmation of safety is nec-
essary. Over reliance on this function
may lead to an accident resulting death
or serious injury.
■ To ensure the system can operate
properly
P.303
4-5. Using the driving support systems313while Stopped) will operate:Secondary Collision Brake● The power switch is in ON.(Rear Impacts while Stopped)● The shift position is in a position otheroperationthan R. *● The turn signal lever is not being oper-With the Secondary Collision Brakeated.(Rear Impacts while Stopped), the rear● Approximately 7 or more minutes haveside radar sensors detect a followingelapsed since the system was driving in the same lane while● The relative speed between your vehiclethe vehicle is stopped. If the systemand the following vehicle is betweenapproximately 30 and 100 km/h (19 anddetermines that the possibility of a62 mph)rear-end collision is very high, the● The vehicle speed is approximately 0brakes and brake lights will be auto-km/h (0 mph).matically controlled to reduce the vehi-*: When the N shift position is selected, thecle speed after the rear-end collisionsystem is not operational when none ofand help reduce the possibility of fur-the brake pedal, parking brake, and4ther damage due to a secondary colli-brake hold system are .■ The Secondary Collision Brake (RearDrivingImpacts while Stopped) will detect avehicle whenThe Secondary Collision Brake (RearImpacts while Stopped) detects the follow-ing vehicle driving in the same lane withinthe detection range, when it determinesthat the possibility of a rear-end collisionwith it is very high.■ Situations in which the Secondary Colli-sion Brake (Rear Impacts whileStopped) cannot detect vehiclesThe Secondary Collision Brake (RearImpacts while Stopped) cannot detect thefollowing vehicles and other objects:● Small motorcycles, bicycles, pedestrians,etc. *● Guardrails, walls, signs, parked vehiclesand similar stationary objects *● Vehicles traveling in the opposite direc-tion■ Operating conditions of Secondary● A vehicle in an adjacent lane *Collision Brake (Rear Impacts while*: Depending on the conditions, detectionStopped)of a vehicle and/or object may occur.W
4-5. Using the driving support systems
313
while Stopped) will operate:
Secondary Collision Brake
● The power switch is in ON.
(Rear Impacts while Stopped)
● The shift position is in a position other
operation
than R. *
● The turn signal lever is not being oper-
With the Secondary Collision Brake
ated.
(Rear Impacts while Stopped), the rear
● Approximately 7 or more minutes have
side radar sensors detect a following
elapsed since the system was operated.
vehicle driving in the same lane while
● The relative speed between your vehicle
the vehicle is stopped. If the system
and the following vehicle is between
approximately 30 and 100 km/h (19 and
determines that the possibility of a
62 mph)
rear-end collision is very high, the
● The vehicle speed is approximately 0
brakes and brake lights will be auto-
km/h (0 mph).
matically controlled to reduce the vehi-
*
: When the N shift position is selected, the
cle speed after the rear-end collision
system is not operational when none of
and help reduce the possibility of fur-
the brake pedal, parking brake, and
4
ther damage due to a secondary colli-
brake hold system are operated.
sion.
■ The Secondary Collision Brake (Rear
Driving
Impacts while Stopped) will detect a
vehicle when
The Secondary Collision Brake (Rear
Impacts while Stopped) detects the follow-
ing vehicle driving in the same lane within
the detection range, when it determines
that the possibility of a rear-end collision
with it is very high.
■ Situations in which the Secondary Colli-
sion Brake (Rear Impacts while
Stopped) cannot detect vehicles
The Secondary Collision Brake (Rear
Impacts while Stopped) cannot detect the
following vehicles and other objects:
● Small motorcycles, bicycles, pedestrians,
etc. *
● Guardrails, walls, signs, parked vehicles
and similar stationary objects *
● Vehicles traveling in the opposite direc-
tion
■ Operating conditions of Secondary
● A vehicle in an adjacent lane *
Collision Brake (Rear Impacts while
*
: Depending on the conditions, detection
Stopped)
of a vehicle and/or object may occur.
When the following conditions are met, the
Secondary Collision Brake (Rear Impacts
3144-5. Using the driving support systems■ Situations in which the Secondary Colli-• When a following vehicle closelysion Brake (Rear Impacts whileapproaches your vehicle before overtak-Stopped) may not operate properlying• When a following vehicle suddenly● In the following situations, the system mayapproaches close to your vehiclenot detect a following vehicle properly:• When your vehicle is surrounded by• When the sensor is misaligned due to aother vehiclesstrong impact to the sensor or its sur-• When there is a static object, such as arounding areaguardrail or wall, around a following vehi-• When mud, snow, ice, a sticker, etc. isclecovering the sensor or surrounding area• When a following vehicle approacheson the rear bumperimmediately before stopping or immedi-• When the vehicle is stopped on a wetately after starting offroad surface, such as in a puddle, while in• When braked on a slippery road, etc.,inclement weather, such as heavy rain,locking your tires, and a following vehiclesnow, fog, • When driving up and down consecutive• When the vehicle is washed in a car washsteep inclines, such as hills, dips in themachineroad, etc.• When towing with the vehicle• When a following vehicle approachesimmediately after your vehicle is stopped• When the following vehicle is notapproaching from straight behind yourvehicle• When the following vehicle is approach-ing from an angle• If a vehicle suddenly cuts behind yourvehicle• When the following vehicle is sur-rounded by other vehicles• When there is a static object, such as aguardrail or wall, around a following vehi-cle• When the height of a following vehicle istoo much different from that of your vehi-cle• When an accessory (such as a bicyclecarrier) is installed to the rear of the vehi-cle● Especially in situations such as the follow-ing, the system may operate even thoughthere is no possibility of a collision:• When the sensor is misaligned due to astrong impact to the sensor or its sur-rounding area•
314
4-5. Using the driving support systems
■ Situations in which the Secondary Colli-
• When a following vehicle closely
sion Brake (Rear Impacts while
approaches your vehicle before overtak-
Stopped) may not operate properly
ing
• When a following vehicle suddenly
● In the following situations, the system may
approaches close to your vehicle
not detect a following vehicle properly:
• When your vehicle is surrounded by
• When the sensor is misaligned due to a
other vehicles
strong impact to the sensor or its sur-
• When there is a static object, such as a
rounding area
guardrail or wall, around a following vehi-
• When mud, snow, ice, a sticker, etc. is
cle
covering the sensor or surrounding area
• When a following vehicle approaches
on the rear bumper
immediately before stopping or immedi-
• When the vehicle is stopped on a wet
ately after starting off
road surface, such as in a puddle, while in
• When braked on a slippery road, etc.,
inclement weather, such as heavy rain,
locking your tires, and a following vehicle
snow, fog, etc.
approaches
• When driving up and down consecutive
• When the vehicle is washed in a car wash
steep inclines, such as hills, dips in the
machine
road, etc.
• When towing with the vehicle
• When a following vehicle approaches
immediately after your vehicle is stopped
• When the following vehicle is not
approaching from straight behind your
vehicle
• When the following vehicle is approach-
ing from an angle
• If a vehicle suddenly cuts behind your
vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When the height of a following vehicle is
too much different from that of your vehi-
cle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
● Especially in situations such as the follow-
ing, the system may operate even though
there is no possibility of a collision:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is stopped to make a
turn at an intersection, etc. and a vehicle
passes your vehicle from straight behind
• When the vehicle is stopped at a road-
side, etc. and another vehicle passes right
next to your vehicle
4-5. Using the driving support systems315Safe Exit Assist *System components* : If equippedThe safe exit assist (with door open-ing control) is a system that usesrear side radar sensors installed onthe inner side of the rear bumper tohelp occupants judge if anapproaching vehicle or bicycle maycollide with a door when exiting orcancel opening of a door, to helpA Center Displayreduce the possibility of a the safe exit assist on/off.B Outside rear view mirror indicatorsWARNINGWhen a vehicle or bicycle which may col-■ Cautions regarding the use of the4lide with a door (other than the back door)systemwhen opened is detected, the outside rear● The driver is solely responsible for safeview mirror indicator (P.95) on theDrivingdriving. Always drive safely, takingdetected side will illuminate. If the door oncare to observe your detected side is open, or opening of the● The safe exit assist is a supplementarydoor is canceled, the outside rear viewsystem that, when the vehicle ismirror indicator will , informs occupants of theexistence of approaching vehicles andC Multi-information displaybicycles. As this system alone cannotIf collision with a door is likely and the doorbe used to judge safety, over-relianceon this system may lead to an accidentis opened or opening of the door is can-resulting in death or serious , the door will be displayed on theIn certain situations, this system may notmulti-information display. Also, if a door isfunction to its fullest extent. Therefore it isopened when an outside rear view mirrornecessary for the occupants to visuallyindicator is illuminated, a buzzer will soundcheck for safety directly and using theas a .D Driving assist information indicatorIlluminates when the safe exit assist isturned off. At this time, a message will bedisplayed on the multi-information display.E SpeakersWhen the outside rear view mirror indica-tor blinks, the driver is informed throughvoice
4-5. Using the driving support systems
315
Safe Exit Assist *
System components
* : If equipped
The safe exit assist (with door open-
ing control) is a system that uses
rear side radar sensors installed on
the inner side of the rear bumper to
help occupants judge if an
approaching vehicle or bicycle may
collide with a door when exiting or
cancel opening of a door, to help
A Center Display
reduce the possibility of a collision.
Turning the safe exit assist on/off.
B Outside rear view mirror indicators
WARNING
When a vehicle or bicycle which may col-
■ Cautions regarding the use of the
4
lide with a door (other than the back door)
system
when opened is detected, the outside rear
● The driver is solely responsible for safe
view mirror indicator (P.95) on the
Driving
driving. Always drive safely, taking
detected side will illuminate. If the door on
care to observe your surroundings.
the detected side is open, or opening of the
● The safe exit assist is a supplementary
door is canceled, the outside rear view
system that, when the vehicle is
mirror indicator will blink.
stopped, informs occupants of the
existence of approaching vehicles and
C Multi-information display
bicycles. As this system alone cannot
If collision with a door is likely and the door
be used to judge safety, over-reliance
on this system may lead to an accident
is opened or opening of the door is can-
resulting in death or serious injury.
celed, the door will be displayed on the
In certain situations, this system may not
multi-information display. Also, if a door is
function to its fullest extent. Therefore it is
opened when an outside rear view mirror
necessary for the occupants to visually
indicator is illuminated, a buzzer will sound
check for safety directly and using the
as a warning.
mirrors.
D Driving assist information indicator
Illuminates when the safe exit assist is
turned off. At this time, a message will be
displayed on the multi-information display.
E Speakers
When the outside rear view mirror indica-
tor blinks, the driver is informed through
voice guidance that the system has oper-
ated. After the notification through voice
guidance is made, no more voice guidance
3164-5. Using the driving support systems*notifications will be made again until the: For each seating position, judgment isdoor is fully based on the opening and closingof a door, before driving for ingress andF Door opener switch (manualafter driving for handle)■ Opening of a door can be canceledIf a door opener switch is operated to openwhena door while the outside rear view mirrorOpening of a door can be canceled onlyindicator on that side is illuminated and thewhen the inside door opener switch issystem determines that the possibility ofpushed in. Opening of a door will not bethe door or an exiting occupant collidingable to be canceled when the outside dooropener switch is a vehicle or bicycle is high, opening ofthe door will be canceled.■ CustomizationSome functions can be customized.■ Outside rear view mirror indicator visi-(P.556)bilityIn strong sunlight, the outside rear view mir-WARNINGror indicator may be difficult to see.■ To ensure the system can operate■ BuzzerproperlyIf the volume setting of the audio system isP.303high or the surrounding area is loud, it maybe difficult to hear the the safe exit assist sys-■ Voice notificationstem ON/OFFIn the following situations, voice notifica-tions will not be output:The safe exit assist system can be● When it is estimated that no occupantsenabled/disabled through a custom-are on board *ize setting. (P.556)● After opening a door and entering thevehicle, until the hybrid system is startedWhen the safe exit assist is off, the driv-● When 3 minutes or more have elapseding assist information indicator will illu-since the hybrid system was stoppedminate and a message will be displayed● When the language setting of the Centeron the multi-information has been set to a language thatdoes not support voice notificationsEach time the power switch is turned to● When all of the doors have been lockedON, the safe exit assist is enabled. *from outside the ve
316
4-5. Using the driving support systems
*
notifications will be made again until the
: For each seating position, judgment is
door is fully closed.
made based on the opening and closing
of a door, before driving for ingress and
F Door opener switch (manual
after driving for egress.
release handle)
■ Opening of a door can be canceled
If a door opener switch is operated to open
when
a door while the outside rear view mirror
Opening of a door can be canceled only
indicator on that side is illuminated and the
when the inside door opener switch is
system determines that the possibility of
pushed in. Opening of a door will not be
the door or an exiting occupant colliding
able to be canceled when the outside door
opener switch is used.
with a vehicle or bicycle is high, opening of
the door will be canceled.
■ Customization
Some functions can be customized.
■ Outside rear view mirror indicator visi-
(P.556)
bility
In strong sunlight, the outside rear view mir-
WARNING
ror indicator may be difficult to see.
■ To ensure the system can operate
■ Buzzer
properly
If the volume setting of the audio system is
P.303
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
Turning the safe exit assist sys-
■ Voice notifications
tem ON/OFF
In the following situations, voice notifica-
tions will not be output:
The safe exit assist system can be
● When it is estimated that no occupants
enabled/disabled through a custom-
are on board *
ize setting. (P.556)
● After opening a door and entering the
vehicle, until the hybrid system is started
When the safe exit assist is off, the driv-
● When 3 minutes or more have elapsed
ing assist information indicator will illu-
since the hybrid system was stopped
minate and a message will be displayed
● When the language setting of the Center
on the multi-information display.
Display has been set to a language that
does not support voice notifications
Each time the power switch is turned to
● When all of the doors have been locked
ON, the safe exit assist is enabled. *
from outside the vehicle
*
● When a door remains open for 1 minute
: When the power switch is turned off and
or more after the hybrid system is
then to ON immediately after that, the
stopped
safe exit assist may not be enabled.
● When the ACC mode (P.556) has
been enabled through a customize set-
ting on the Center Display and the hybrid
system has been stopped
● When the parking assist volume setting
on the Center Display has been set to off
4-5. Using the driving support systems317Safe exit assist operation■ Objects that can be detected by the safe exit assistWhen the safe exit assist detects the following vehicles or bicycles behind yourvehicle using a rear side radar sensor, the occupants of the vehicle are informedthrough an outside rear view mirror indicator, buzzer, multi-information display,and voice notification.4A Vehicle or bicycle which has a high possibility of colliding with a door (otherDrivingthan the back door) when opened■ The safe exit assist detection areasThe areas that vehicles can be detected in are outlined below.A Approximately 45 m (145 ft.) rearward from the front door **: The faster a vehicle or bicycle is approaching, the distance at which an outside rear viewmirror indicator will illuminate or blink will become elapsed since a door was opened■ The safe exit assist is operational whenand someone has entered the vehicle(the time which operation is possible mayThe safe exit assist is operational when all ofbe extended if a door is opened andthe following conditions are met:closed)● When the power switch is ON, less than● Safe exit assist is on3 minutes have elapsed since the hybridsystem was off, or less than 3 minutes● The vehicle is stopped.
4-5. Using the driving support systems
317
Safe exit assist operation
■ Objects that can be detected by the safe exit assist
When the safe exit assist detects the following vehicles or bicycles behind your
vehicle using a rear side radar sensor, the occupants of the vehicle are informed
through an outside rear view mirror indicator, buzzer, multi-information display,
and voice notification.
4
A Vehicle or bicycle which has a high possibility of colliding with a door (other
Driving
than the back door) when opened
■ The safe exit assist detection areas
The areas that vehicles can be detected in are outlined below.
A Approximately 45 m (145 ft.) rearward from the front door *
*
: The faster a vehicle or bicycle is approaching, the distance at which an outside rear view
mirror indicator will illuminate or blink will become further.
have elapsed since a door was opened
■ The safe exit assist is operational when
and someone has entered the vehicle
(the time which operation is possible may
The safe exit assist is operational when all of
be extended if a door is opened and
the following conditions are met:
closed)
● When the power switch is ON, less than
● Safe exit assist is on
3 minutes have elapsed since the hybrid
system was off, or less than 3 minutes
● The vehicle is stopped.
3184-5. Using the driving support systems● The shift position is in a position otheropener switch again. Perform the followingthan in an emergency, etc., to open a doorwhile the warning is operating, after check-■ The safe exit assist will detect a vehicleing the safety of the area around your safe exit assist will detect a vehicle● Press and hold an inside door openerpresent in the detection area in the follow-switch for approximately 3 seconds oring situations:more● When the vehicle is stopped and a vehi-● Press an inside door opener switchcle or bicycle, which is traveling parallelquickly 3 times or moreto the vehicle, is approaching within the● Pull a manual release handlearea that a door opens (other than theback door)■ Conditions under which the system maynot function correctly■ Conditions under which the system willnot detect a vehicle● The safe exit assist may not detect vehi-cles correctly in the following situations:● Safe exit assist does not detect the fol-• When the sensor is misaligned due to alowing objects, vehicles, and bicycles:strong impact to the sensor or its sur-• Vehicles or bicycles which are approach-rounding areaing slowly *• When mud, snow, ice, a sticker, etc., is• Vehicles or bicycles which are deter-covering the sensor or surrounding areamined to have a low possibility of collid-on the rear bumpering with a door (other than the back• When the vehicle is stopped on a wetdoor) when opened *road surface, such as in a puddle, while in• Vehicles or bicycles which are approach-inclement weather, such as heavy rain,ing from directly behind *snow, fog, etc.• Vehicles or bicycles which are approach-• When a vehicle or bicycle approachesing from the front *from behind a nearby parked vehicle• When an approaching vehicle or bicycle• Guardrails, walls, signs, parked vehicles,suddenly changes directionand other stationary objects *• Immediately after a vehicle or bicycle• Pedestrians, animals, etc. *starts moving*• When the b
318
4-5. Using the driving support systems
● The shift position is in a position other
opener switch again. Perform the following
than R.
only in an emergency, etc., to open a door
while the warning is operating, after check-
■ The safe exit assist will detect a vehicle
ing the safety of the area around your vehi-
when
cle.
The safe exit assist will detect a vehicle
● Press and hold an inside door opener
present in the detection area in the follow-
switch for approximately 3 seconds or
ing situations:
more
● When the vehicle is stopped and a vehi-
● Press an inside door opener switch
cle or bicycle, which is traveling parallel
quickly 3 times or more
to the vehicle, is approaching within the
● Pull a manual release handle
area that a door opens (other than the
back door)
■ Conditions under which the system may
not function correctly
■ Conditions under which the system will
not detect a vehicle
● The safe exit assist may not detect vehi-
cles correctly in the following situations:
● Safe exit assist does not detect the fol-
• When the sensor is misaligned due to a
lowing objects, vehicles, and bicycles:
strong impact to the sensor or its sur-
• Vehicles or bicycles which are approach-
rounding area
ing slowly *
• When mud, snow, ice, a sticker, etc., is
• Vehicles or bicycles which are deter-
covering the sensor or surrounding area
mined to have a low possibility of collid-
on the rear bumper
ing with a door (other than the back
• When the vehicle is stopped on a wet
door) when opened *
road surface, such as in a puddle, while in
• Vehicles or bicycles which are approach-
inclement weather, such as heavy rain,
ing from directly behind *
snow, fog, etc.
• Vehicles or bicycles which are approach-
• When a vehicle or bicycle approaches
ing from the front *
from behind a nearby parked vehicle
• When an approaching vehicle or bicycle
• Guardrails, walls, signs, parked vehicles,
suddenly changes direction
and other stationary objects *
• Immediately after a vehicle or bicycle
• Pedestrians, animals, etc. *
starts moving
*
• When the back door is open
: Depending on the conditions, detection
• When a bicycle carrier, ramp, or other
of a vehicle and/or object may occur.
accessory is installed to the back of the
● In situations such as the following, safe
vehicle
exit assist will not operate:
• When a parked vehicle, wall, sign, person
• When 3 minutes or more have elapsed
or other stationary object is behind the
since the hybrid system off (the time
vehicle
which operation is possible may be
• When the vehicle is stopped at an angle
extended if a door is opened and closed)
to the road
• When your vehicle is not completely
• When a vehicle is traveling near an
stopped
approaching vehicle or bicycle
• When an approaching vehicle or bicycle
■ Opening the doors when opening is
is traveling along a stationary object, such
canceled by the system
a wall or sign
Perform the following operation to open a
• When a vehicle or bicycle is approaching
door.
at high speed
• When towing with the vehicle
After the approaching vehicle or bicycle
• When stopped on a steep slope
passes or changes direction, check the sur-
• When stopped on a curve or at the exit of
rounding area and press the inside door
4-5. Using the driving support systems319a curveLexus parking assist-sensor *● Instances of the safe exit assist unneces-sarily detecting a vehicle and/or object* : If equippedmay increase in the following situations:• When the sensor is misaligned due to aThe Lexus parking assist-sensorstrong impact to the sensor or its sur-function detects the approximaterounding area• When a vehicle or bicycle approachesdistance from the vehicle and anyour vehicle from directly behind in anobject such as a wall using ultra-offset positionsonic sensors and informs the• When the vehicle is stopped at an angleto the roaddriver with the Center Display dis-• When a vehicle or bicycle approachestance display and behind a parked vehicle at an angle• When a parked vehicle, wall, sign, personor other stationary object is behind theSystem componentsvehicle• When an approaching vehicle or bicyclesuddenly changes direction■ Type of sensors• When an approaching vehicle or bicycleis traveling along a stationary object, such4a wall or sign• When the back door is openDriving• When a bicycle carrier, ramp, or otheraccessory is installed to the back of thevehicle• When a vehicle or bicycle is approachingat high speed• When towing with the vehicle• When stopped on a steep slope• When stopped on a curve or at the exit ofa curveA Front corner sensors• When a vehicle or bicycle approachesfrom behind a vehicle stopped in an adja-B Front center sensorscent laneC Rear corner sensorsD Rear center sensorsE Front side sensors (vehicles withAdvanced Park)F Rear side sensors (vehicles withAdvanced Park)■ DisplayWhen the sensors detect an object,such as a wall, a graphic is shown onthe Center Display depending on theposition and distance to the object.
4-5. Using the driving support systems
319
a curve
Lexus parking assist-sensor *
● Instances of the safe exit assist unneces-
sarily detecting a vehicle and/or object
* : If equipped
may increase in the following situations:
• When the sensor is misaligned due to a
The Lexus parking assist-sensor
strong impact to the sensor or its sur-
function detects the approximate
rounding area
• When a vehicle or bicycle approaches
distance from the vehicle and an
your vehicle from directly behind in an
object such as a wall using ultra-
offset position
sonic sensors and informs the
• When the vehicle is stopped at an angle
to the road
driver with the Center Display dis-
• When a vehicle or bicycle approaches
tance display and buzzer.
from behind a parked vehicle at an angle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
System components
vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
■ Type of sensors
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
4
a wall or sign
• When the back door is open
Driving
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
A Front corner sensors
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
B Front center sensors
cent lane
C Rear corner sensors
D Rear center sensors
E Front side sensors (vehicles with
Advanced Park)
F Rear side sensors (vehicles with
Advanced Park)
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
3204-5. Using the driving support systemsThe illustration is an example for and may differ depending on theIf the system switches to OFF () and the Lexus parking assist- Center Displaysensor is stopped, the Lexus parkingassist-sensor will not be re-enableduntil ON (enabled) is selected againfrom the customize setting (P.556).(It remains off even if the power switchis turned to ON again after the powerswitch has been turned off.)Vehicles with the Lexus parking assist-sensor detection indicator: The systemwill automatically turn on (enabled)■ Lexus parking assist-sensor detec-and the Lexus parking assist-sensortion indicator *OFF indicator will turn off if the shiftWhen the sensors detect an object,position is changed to parking assist-sensor detectionWhen the shift position is R, the Lexusindicator assist-sensor cannot be turnedon or off.* : If equippedThe setting of Lexus parking assist-sensor itself will not change.■ How to check the presence of Lexusparking assist-sensor detection indica-torWARNINGOn vehicles with the Lexus parking assist-■ Cautions regarding the use of thesensor detection indicator, the Lexus park-systeming assist-sensor OFF indicator (P.320)There is a limit to the degree of recogni-will turn off when the shift position istion accuracy and control performancechanged to R while the Lexus parkingthat this system can provide, do notassist-sensor is rely on this system. The driver isalways responsible for paying attentionTurning the Lexus parking assist-to the vehicle’s surroundings and function ON/OFF■ To ensure the system can operateThe Lexus parking assist-sensor func-properlytion can be enabled/disabled throughMake sure to observe the following pre-cautions. The system may not operatea customize setting. (P.556)properly and may lead to an unexpectedWhen the Lexus parking assist-sensoraccident. When these precautions can-not be observe
320
4-5. Using the driving support systems
The illustration is an example for expla-
display.
nation and may differ depending on the
If the system switches to OFF (dis-
specifications.
abled) and the Lexus parking assist-
 Center Display
sensor is stopped, the Lexus parking
assist-sensor will not be re-enabled
until ON (enabled) is selected again
from the customize setting (P.556).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
Vehicles with the Lexus parking assist-
sensor detection indicator: The system
will automatically turn on (enabled)
■ Lexus parking assist-sensor detec-
and the Lexus parking assist-sensor
tion indicator *
OFF indicator will turn off if the shift
When the sensors detect an object,
position is changed to R.
Lexus parking assist-sensor detection
When the shift position is R, the Lexus
indicator illuminates.
parking assist-sensor cannot be turned
on or off.
* : If equipped
The setting of Lexus parking assist-
sensor itself will not change.
■ How to check the presence of Lexus
parking assist-sensor detection indica-
tor
WARNING
On vehicles with the Lexus parking assist-
■ Cautions regarding the use of the
sensor detection indicator, the Lexus park-
system
ing assist-sensor OFF indicator (P.320)
There is a limit to the degree of recogni-
will turn off when the shift position is
tion accuracy and control performance
changed to R while the Lexus parking
that this system can provide, do not
assist-sensor is disabled.
overly rely on this system. The driver is
always responsible for paying attention
Turning the Lexus parking assist-
to the vehicle’s surroundings and driving
safely.
sensor function ON/OFF
■ To ensure the system can operate
The Lexus parking assist-sensor func-
properly
tion can be enabled/disabled through
Make sure to observe the following pre-
cautions. The system may not operate
a customize setting. (P.556)
properly and may lead to an unexpected
When the Lexus parking assist-sensor
accident. When these precautions can-
not be observed, turn the system off.
function is disabled, the Lexus parking
assist-sensor OFF indicator (P.95)
● Do not damage the sensors, and
always keep them clean.
illuminates on the multi-information
4-5. Using the driving support systems321• The shift position is in a position otherWARNINGthan P or R.● Do not attach a sticker or install a com-● Rear corner and rear center sensors:ponent, such as a backlit license plate• The shift position is in R.(especially fluorescent type), fog lights,● Side sensors: (vehicles with Advancedfender pole or wireless antenna near aPark)radar sensor.• The vehicle is moving about 7 m (23.0 ft.)after the hybrid system was started.● Do not subject the surrounding area of• The vehicle is moving about 7 m (23.0 ft.)the sensor to a strong impact. If sub-after the shift position was changed fromjected to an impact, have the vehicleR to by any authorized Lexus• The shift position is in or Lexus authorized repairer,or any reliable repairer. If the front or•switch has been pressed and therear bumper needs to beCenter Display is or replaced, con-• The front or rear sensor detects a station-tact any authorized Lexus retailer orary authorized repairer, or any reli-able with the Lexus parking assist-sen-sor detection indicator: Even when the● Do not modify, disassemble or paintLexus parking assist-sensor is turned off4the sensors.(disabled), if the shift position is changed toR, the system will automatically turn on● Do not attach a license plate cover.(enabled) and the Lexus parking assist-sen-Drivingsor OFF indicator will turn off.● Keep your tires properly setting of the Lexus parking assist-sen-sor itself will not change.● Do not install a suspension other thana genuine suspension.■ Sensor detection information■ Notes when washing the vehicle● The sensor’s detection areas are limitedto the areas around the vehicle’s front● When using a high pressure washer toand rear the vehicle, do not spray the sen-sors directly, as doing so may cause a● Certain vehicle conditions and the sur-sensor to environment may affect th
4-5. Using the driving support systems
321
• The shift position is in a position other
WARNING
than P or R.
● Do not attach a sticker or install a com-
● Rear corner and rear center sensors:
ponent, such as a backlit license plate
• The shift position is in R.
(especially fluorescent type), fog lights,
● Side sensors: (vehicles with Advanced
fender pole or wireless antenna near a
Park)
radar sensor.
• The vehicle is moving about 7 m (23.0 ft.)
after the hybrid system was started.
● Do not subject the surrounding area of
• The vehicle is moving about 7 m (23.0 ft.)
the sensor to a strong impact. If sub-
after the shift position was changed from
jected to an impact, have the vehicle
R to D.
inspected by any authorized Lexus
• The shift position is in R.
retailer or Lexus authorized repairer,
or any reliable repairer. If the front or
•
switch has been pressed and the
rear bumper needs to be
Center Display is displayed.
removed/installed or replaced, con-
• The front or rear sensor detects a station-
tact any authorized Lexus retailer or
ary object.
Lexus authorized repairer, or any reli-
able repairer.
Vehicles with the Lexus parking assist-sen-
sor detection indicator: Even when the
● Do not modify, disassemble or paint
Lexus parking assist-sensor is turned off
4
the sensors.
(disabled), if the shift position is changed to
R, the system will automatically turn on
● Do not attach a license plate cover.
(enabled) and the Lexus parking assist-sen-
Driving
sor OFF indicator will turn off.
● Keep your tires properly inflated.
The setting of the Lexus parking assist-sen-
sor itself will not change.
● Do not install a suspension other than
a genuine suspension.
■ Sensor detection information
■ Notes when washing the vehicle
● The sensor’s detection areas are limited
to the areas around the vehicle’s front
● When using a high pressure washer to
and rear bumpers.
wash the vehicle, do not spray the sen-
sors directly, as doing so may cause a
● Certain vehicle conditions and the sur-
sensor to malfunction.
rounding environment may affect the
ability of a sensor to correctly detect an
● When using steam to clean the vehi-
object.
cle, do not direct steam too close to
● Objects may not be detected if they are
the sensors, as doing so may cause a
too close to the sensor.
sensor to malfunction.
● There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
■ The system can be operated when
object will come within the sensor’s
● The power switch is in ON.
detection areas before the display is
● The Lexus parking assist-sensor is on.
shown and the warning beep sounds.
● It might be difficult to hear the buzzer due
● The vehicle speed is less than about 10
km/h (6 mph).
to the volume of the audio system or air
flow noise of the air conditioning system.
● Front corner sensors:
● It may be difficult to hear the sound of this
• The shift position is in a position other
than P.
system due to the buzzers of other sys-
tems.
● Front center sensors:
3224-5. Using the driving support systems● If the meter malfunctions, the buzzer may● When vehicle horns, vehicle detectors,not engines, air brakes of largevehicles, the clearance sonar of other■ Objects which the system may not bevehicles or other devices which produceproperly detectedultrasonic waves are near the shape of the object may prevent the● A sensor is coated with a sheet of spraysensor from detecting it. Pay particularor heavy to the following objects:● If objects draw too close to the sensor.● Wires, fences, ropes, etc.● When a pedestrian is wearing clothing● Cotton, snow and other materials thatthat does not reflect ultrasonic waves ( sound wavesskirts with gathers or frills).● Sharply-angled objects● When objects that are not perpendicular● Low objectsto the ground, not perpendicular to thevehicle traveling direction, uneven, or● Tall objects with upper sections project-waving are in the detection outwards in the direction of your vehi-cle● When strong winds are may not be detected if they are● When driving in inclement weather suchwearing certain types of fog, snow or a sandstorm.■ Situations in which the system may not● When an object that cannot be detectedoperate properlyis between the vehicle and a vehicle conditions and the sur-rounding environment may affect the ability● If an object such as a vehicle, motorcycle,of a sensor to correctly detect objects. Par-bicycle or pedestrian cuts in front of theticular instances where this may occur arevehicle or runs out from the side of thelisted .● There is dirt, snow, water drops or ice on● If the orientation of a sensor has beena sensor. (Cleaning the sensors willchanged due to a collision or otherresolve this problem.)impact.● A sensor is frozen. (Thawing the area will● When equipment such as a towing eye-resolve this problem.) In especially coldlet, transport hook, bumper prot
322
4-5. Using the driving support systems
● If the meter malfunctions, the buzzer may
● When vehicle horns, vehicle detectors,
not sound.
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
■ Objects which the system may not be
vehicles or other devices which produce
properly detected
ultrasonic waves are near the vehicle.
The shape of the object may prevent the
● A sensor is coated with a sheet of spray
sensor from detecting it. Pay particular
or heavy rain.
attention to the following objects:
● If objects draw too close to the sensor.
● Wires, fences, ropes, etc.
● When a pedestrian is wearing clothing
● Cotton, snow and other materials that
that does not reflect ultrasonic waves (ex.
absorb sound waves
skirts with gathers or frills).
● Sharply-angled objects
● When objects that are not perpendicular
● Low objects
to the ground, not perpendicular to the
vehicle traveling direction, uneven, or
● Tall objects with upper sections project-
waving are in the detection range.
ing outwards in the direction of your vehi-
cle
● When strong winds are blowing.
People may not be detected if they are
● When driving in inclement weather such
wearing certain types of clothing.
as fog, snow or a sandstorm.
■ Situations in which the system may not
● When an object that cannot be detected
operate properly
is between the vehicle and a detected
object.
Certain vehicle conditions and the sur-
rounding environment may affect the ability
● If an object such as a vehicle, motorcycle,
of a sensor to correctly detect objects. Par-
bicycle or pedestrian cuts in front of the
ticular instances where this may occur are
vehicle or runs out from the side of the
listed below.
vehicle.
● There is dirt, snow, water drops or ice on
● If the orientation of a sensor has been
a sensor. (Cleaning the sensors will
changed due to a collision or other
resolve this problem.)
impact.
● A sensor is frozen. (Thawing the area will
● When equipment such as a towing eye-
resolve this problem.) In especially cold
let, transport hook, bumper protector,
weather, if a sensor is frozen the sensor
bumper trim, bicycle carrier or snow-
display may be displayed abnormally, or
removal device (snow plow) is installed
objects, such as a wall, may not be
near the sensor.
detected.
● If the front of the vehicle is raised or low-
● When a sensor or the area around a sen-
ered due to the carried load.
sor is extremely hot or cold.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle.
■ Situations in which the system may
operate even if there is no possibility of a
● On an extremely bumpy road, on an
collision
incline, on gravel, or on grass.
In some situations, such as the following, the
4-5. Using the driving support systems323system may operate even though there isered due to the carried possibility of a collision.● If the orientation of a sensor has been● When driving on a narrow due to a collision or otherimpact.● The vehicle is approaching a tall orcurved curb.● Driving close to columns (H-shaped steelbeams, etc.) in multi-story parkinggarages, construction sites, etc.● If the vehicle cannot be driven in a stablemanner, such as when the vehicle hasbeen in an accident or is malfunctioning.● When driving toward a banner, flag, low-hanging branch or boom barrier (such as● On an extremely bumpy road, on anthose used at railroad crossings, tollincline, on gravel, or on and parking lots).● When there is a rut or hole in the surfaceof the road.● When driving on a metal cover (grating),4such as those used for drainage ditches.● When driving up or down a steep ● If a sensor is hit by a large amount ofwater, such as when driving on a floodedroad.● When tire chains, compact spare tire oran emergency tire puncture repair kit are● There is dirt, snow, water drops or ice onused.a sensor. (Cleaning the sensors willresolve this problem.)● When towing with the vehicle.● A sensor is coated with a sheet of sprayor heavy rain.● When driving in inclement weather suchas fog, snow or a sandstorm.● When strong winds are blowing.● When vehicle horns, vehicle detectors,motorcycle engines, air brakes of largevehicles, the clearance sonar of othervehicles or other devices which produceultrasonic waves are near the vehicle.● If the front of the vehicle is raised or low-
4-5. Using the driving support systems
323
system may operate even though there is
ered due to the carried load.
no possibility of a collision.
● If the orientation of a sensor has been
● When driving on a narrow road.
changed due to a collision or other
impact.
● The vehicle is approaching a tall or
curved curb.
● Driving close to columns (H-shaped steel
beams, etc.) in multi-story parking
garages, construction sites, etc.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When driving toward a banner, flag, low-
hanging branch or boom barrier (such as
● On an extremely bumpy road, on an
those used at railroad crossings, toll
incline, on gravel, or on grass.
gates and parking lots).
● When there is a rut or hole in the surface
of the road.
● When driving on a metal cover (grating),
4
such as those used for drainage ditches.
● When driving up or down a steep slope.
Driving
● If a sensor is hit by a large amount of
water, such as when driving on a flooded
road.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
● There is dirt, snow, water drops or ice on
used.
a sensor. (Cleaning the sensors will
resolve this problem.)
● When towing with the vehicle.
● A sensor is coated with a sheet of spray
or heavy rain.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When strong winds are blowing.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● If the front of the vehicle is raised or low-
3244-5. Using the driving support systemsthe detection display, objectThe range of the sensors may changedistancedepending on the shape of the object, etc.■ Detection range of the sensors Vehicles with Advanced Park Vehicles without Advanced ParkA Approximately 200 cm (6.6 ft.)The diagram shows the detection range ofA Approximately 100 cm (3.3 ft.)the sensors. Note that the sensors cannotB Approximately 150 cm (4.9 ft.)detect objects that are extremely close tothe vehicle.C Approximately 60 cm (2.0 ft.)The range of the sensors may changeThe diagram shows the detection range ofdepending on the shape of the object, sensors. Note that the sensors cannotdetect objects that are extremely close to■ The distance and buzzer Vehicles without Advanced ParkApproximate distance to objectBuzzerFront center sensor:Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.) *SlowRear center sensor:Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.) *Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.) *MediumApproximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.) *FastApproximately less than 30 cm (1.0 ft.)Continuous
324
4-5. Using the driving support systems
the vehicle.
Sensor detection display, object
The range of the sensors may change
distance
depending on the shape of the object, etc.
■ Detection range of the sensors
 Vehicles with Advanced Park
 Vehicles without Advanced Park
A Approximately 200 cm (6.6 ft.)
The diagram shows the detection range of
A Approximately 100 cm (3.3 ft.)
the sensors. Note that the sensors cannot
B Approximately 150 cm (4.9 ft.)
detect objects that are extremely close to
the vehicle.
C Approximately 60 cm (2.0 ft.)
The range of the sensors may change
The diagram shows the detection range of
depending on the shape of the object, etc.
the sensors. Note that the sensors cannot
detect objects that are extremely close to
■ The distance and buzzer
 Vehicles without Advanced Park
Approximate distance to object
Buzzer
Front center sensor:
Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.) *
Slow
Rear center sensor:
Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.) *
Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.) *
Medium
Approximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.) *
Fast
Approximately less than 30 cm (1.0 ft.)
Continuous
4-5. Using the driving support systems325*: Automatic buzzer mute function is enabled. (P.326) Vehicles with Advanced ParkApproximate distance to objectBuzzerFront center sensor:Approximately 200 cm (6.6 ft.) to 100 cm (3.3 ft.)Rear center sensor:Does not sound (Display only)Approximately 200 cm (6.6 ft.) to 150 cm (4.9 ft.)Corner sensor:Approximately 200 cm (6.6 ft.) to 60 cm (2.0 ft.)Front center sensor:Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.) *SlowRear center sensor:4Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.) *Front/Rear center sensor and Corner sensor:DrivingMediumApproximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.) *Front/Rear center sensor and Corner sensor:FastApproximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.) *Approximately less than 30 cm (1.0 ft.)Continuous*: Automatic buzzer mute function is enabled. (P.326)buzzer sounds for the nearestLexus parking  After an intermittent buzzer beginsA buzzer sounds when the sensors aresounding, if the distance vehicle and the detected static The buzzer beeps faster as the vehi-object does not become shorter, thebuzzer will be muted approaches a static object.(automatic buzzer mute function)When the vehicle comes within theapproximately 30 cm (1.0 ft.) of the■ Adjusting the buzzer volumeobject, the buzzer will sound buzzer volume of the Lexus parkingassist-sensor, RCTA (if equipped) and When 2 or more sensors simultane-RCD (if equipped) can all be changed atonce from the customize detect a static object, the
4-5. Using the driving support systems
325
*
: Automatic buzzer mute function is enabled. (P.326)
 Vehicles with Advanced Park
Approximate distance to object
Buzzer
Front center sensor:
Approximately 200 cm (6.6 ft.) to 100 cm (3.3 ft.)
Rear center sensor:
Does not sound (Display only)
Approximately 200 cm (6.6 ft.) to 150 cm (4.9 ft.)
Corner sensor:
Approximately 200 cm (6.6 ft.) to 60 cm (2.0 ft.)
Front center sensor:
Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.) *
Slow
Rear center sensor:
4
Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.) *
Front/Rear center sensor and Corner sensor:
Driving
Medium
Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.) *
Front/Rear center sensor and Corner sensor:
Fast
Approximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.) *
Approximately less than 30 cm (1.0 ft.)
Continuous
*
: Automatic buzzer mute function is enabled. (P.326)
buzzer sounds for the nearest
Lexus parking assist-sensor
object.
buzzer
 After an intermittent buzzer begins
A buzzer sounds when the sensors are
sounding, if the distance between
operating.
the vehicle and the detected static
 The buzzer beeps faster as the vehi-
object does not become shorter, the
buzzer will be muted automatically.
cle approaches a static object.
(automatic buzzer mute function)
When the vehicle comes within the
approximately 30 cm (1.0 ft.) of the
■ Adjusting the buzzer volume
object, the buzzer will sound contin-
uously.
The buzzer volume of the Lexus parking
assist-sensor, RCTA (if equipped) and
 When 2 or more sensors simultane-
RCD (if equipped) can all be changed at
once from the customize settings.
ously detect a static object, the
3264-5. Using the driving support systems(P.556)Lexus parking assist-sensor■ Muting a buzzerobject warning function (vehi-When the temporary mute switch is dis-cles with Advanced Park)played on the Center Display, this switchcan be pressed to temporarily mute theThe object warning function driver of the existence of objectsSelect the switch to mute a buzzer of theLexus parking assist-sensor, RCTA (ifalong the side of the vehicle, using aequipped) and RCD (if equipped) alldisplay and buzzer, if the objects the estimated path of the vehi-● Mute will be automatically canceled following situations:• When the shift position is changed.• When the vehicle speed exceeds a cer-tain speed.• When there is a malfunction in a sensoror the system is temporarily unavailable.• When the operating function is disabledmanually.• When the power switch is turned off.A ObjectB Calculated vehicle routeWhen the vehicle is moving, the side sensors or side cameras can detect the vehicle is moving, if a detected object can no longer be detected by theside sensors or side cameras, the location of the object relative to the vehicle isestimated. If the object is determined to be in the estimated path of the vehicle, theobject warning function will operate.A Object detected by side sensors or side cameras1 The vehicle is stopped and objects along the sides of the vehicle are notdetected.
326
4-5. Using the driving support systems
(P.556)
Lexus parking assist-sensor
■ Muting a buzzer
object warning function (vehi-
When the temporary mute switch is dis-
cles with Advanced Park)
played on the Center Display, this switch
can be pressed to temporarily mute the
The object warning function informs
buzzer.
the driver of the existence of objects
Select the switch to mute a buzzer of the
Lexus parking assist-sensor, RCTA (if
along the side of the vehicle, using a
equipped) and RCD (if equipped) all
display and buzzer, if the objects are
together.
within the estimated path of the vehi-
● Mute will be automatically canceled in
cle.
the following situations:
• When the shift position is changed.
• When the vehicle speed exceeds a cer-
tain speed.
• When there is a malfunction in a sensor
or the system is temporarily unavailable.
• When the operating function is disabled
manually.
• When the power switch is turned off.
A Object
B Calculated vehicle route
When the vehicle is moving, the side sensors or side cameras can detect objects.
While the vehicle is moving, if a detected object can no longer be detected by the
side sensors or side cameras, the location of the object relative to the vehicle is
estimated. If the object is determined to be in the estimated path of the vehicle, the
object warning function will operate.
A Object detected by side sensors or side cameras
1 The vehicle is stopped and objects along the sides of the vehicle are not
detected.
4-5. Using the driving support systems3272 Objects are detected as the vehicle is moving.3 Even though the objects are outside of the detection area of the side sensors orside cameras, a warning is displayed and a buzzer sounds.● When starting off shortly after the■ Object warning function operating con-power switch is turned to ON and aditionssmall vehicle or other object which● The vehicle moves about 7 m (23.0 ft.)cannot be detected by a front side sen-after the hybrid system is is next to the the situation shown in the following● After the D shift position has beenillustration, even if the vehicle starts off,selected, the vehicle has moved 7 mthe vehicle on the left will not be(23.0 ft.) or and the object warning func-● The R shift position is will not operate.●switch has been pressed and theCenter Display is displayed.● The front or rear sensor detects a station-ary object.4■ Detection of objects along the sides ofthe vehicleDriving● Objects along the sides of the vehicle arenot instantaneously detected. The loca-● When an object or person is in a posi-tion of objects in relation to the vehicle istion which cannot be detected by theestimated after they are first detected byside sensors or side front or rear side sensors, or sidecameras. Therefore, after the power● When a vehicle, person, or otherswitch is changed to ON, even if anobject approaches the side of the vehi-object is along the side of the vehicle, itcle after the side sensors have com-may not be detected until the vehicle haspleted scanning the areas along thebeen driven a small amount and the sidesides of the or side cameras completely scanthe areas along the sides of the vehicle.● When the outside rear view mirror isfolded.● If a vehicle, person, animal, etc., isdetected by a side sensors or side cam-● If the 12-volt battery was discharged oreras, but then leaves the detection areahas been removed and installed, foldof t
4-5. Using the driving support systems
327
2 Objects are detected as the vehicle is moving.
3 Even though the objects are outside of the detection area of the side sensors or
side cameras, a warning is displayed and a buzzer sounds.
● When starting off shortly after the
■ Object warning function operating con-
power switch is turned to ON and a
ditions
small vehicle or other object which
● The vehicle moves about 7 m (23.0 ft.)
cannot be detected by a front side sen-
after the hybrid system is started.
sor is next to the vehicle.
In the situation shown in the following
● After the D shift position has been
illustration, even if the vehicle starts off,
selected, the vehicle has moved 7 m
the vehicle on the left will not be
(23.0 ft.) or less.
detected and the object warning func-
● The R shift position is selected.
tion will not operate.
●
switch has been pressed and the
Center Display is displayed.
● The front or rear sensor detects a station-
ary object.
4
■ Detection of objects along the sides of
the vehicle
Driving
● Objects along the sides of the vehicle are
not instantaneously detected. The loca-
● When an object or person is in a posi-
tion of objects in relation to the vehicle is
tion which cannot be detected by the
estimated after they are first detected by
side sensors or side cameras.
the front or rear side sensors, or side
cameras. Therefore, after the power
● When a vehicle, person, or other
switch is changed to ON, even if an
object approaches the side of the vehi-
object is along the side of the vehicle, it
cle after the side sensors have com-
may not be detected until the vehicle has
pleted scanning the areas along the
been driven a small amount and the side
sides of the vehicle.
sensors or side cameras completely scan
the areas along the sides of the vehicle.
● When the outside rear view mirror is
folded.
● If a vehicle, person, animal, etc., is
detected by a side sensors or side cam-
● If the 12-volt battery was discharged or
eras, but then leaves the detection area
has been removed and installed, fold
of the side sensors or side cameras, the
and extend the outside rear view mir-
system will assume the object has not
rors.
moved.
WARNING
■ Side sensors and side cameras
In situations such as the following, the
function may not operate correctly, pos-
sibly leading to an accident. Proceed
carefully.
3284-5. Using the driving support systemsRCTA (Rear Crossing TrafficSystem componentsAlert) function **: If equippedThe RCTA function uses the BSMrear side radar sensors installedbehind the rear bumper. This func-tion is intended to assist the driverin checking areas that are not easilyvisible when backing up.A Center DisplayWARNINGTurning the RCTA function on/off in Cen-■ Cautions regarding the use of theter a vehicle approaching from the right orThe driver is solely responsible for safeleft at the rear of the vehicle is detected,driving. Always drive safely, taking carethe RCTA icon (P.329) for the detectedto observe your will be displayed on the Center Dis-The RCTA function is only a supplemen-play. This illustration * shows an example oftary function which alerts the driver that aa vehicle approaching from both sides ofvehicle is approaching from the right orleft at the rear of the the RCTA function may not function* : Depending on the vehicle grade andcorrectly under certain conditions, theequipped options, the actual screen maydriver’s own visual confirmation of safetybe different from this reliance on this function may leadB Outside rear view mirror indicatorsto an accident resulting death or seriousIf a vehicle is detected as the left or right behind the vehicle,■ To ensure the system can operateboth outside rear view mirror indicatorsproperly(P.95) will blink and a buzzer will sound.P.303C Driving assist information indicatorIlluminates when the RCTA is turned this time, a message will be displayed onthe multi-information the RCTA functionon/offThe RCTA can be enabled/disabledthrough a customize setting.
328
4-5. Using the driving support systems
RCTA (Rear Crossing Traffic
System components
Alert) function *
*
: If equipped
The RCTA function uses the BSM
rear side radar sensors installed
behind the rear bumper. This func-
tion is intended to assist the driver
in checking areas that are not easily
visible when backing up.
A Center Display
WARNING
Turning the RCTA function on/off in Cen-
■ Cautions regarding the use of the
ter Display.
system
If a vehicle approaching from the right or
The driver is solely responsible for safe
left at the rear of the vehicle is detected,
driving. Always drive safely, taking care
the RCTA icon (P.329) for the detected
to observe your surroundings.
side will be displayed on the Center Dis-
The RCTA function is only a supplemen-
play. This illustration * shows an example of
tary function which alerts the driver that a
a vehicle approaching from both sides of
vehicle is approaching from the right or
left at the rear of the vehicle.
the vehicle.
As the RCTA function may not function
* : Depending on the vehicle grade and
correctly under certain conditions, the
equipped options, the actual screen may
driver’s own visual confirmation of safety
be different from this illustration.
is necessary.
Over reliance on this function may lead
B Outside rear view mirror indicators
to an accident resulting death or serious
If a vehicle is detected as approaching
injury.
from the left or right behind the vehicle,
■ To ensure the system can operate
both outside rear view mirror indicators
properly
(P.95) will blink and a buzzer will sound.
P.303
C Driving assist information indicator
Illuminates when the RCTA is turned off.
At this time, a message will be displayed on
the multi-information display.
Turning the RCTA function
on/off
The RCTA can be enabled/disabled
through a customize setting.
4-5. Using the driving support systems329(P.556)A Approaching vehiclesWhen the RCTA function is off, theB Detection areas of approachingdriving assist information indicatorvehicles(P.95) will illuminate and a message■ RCTA icon displaywill be displayed on the multi-informa-When a vehicle approaching from thetion display. Each time the powerright or left at the rear of the vehicle isswitch is turned to ON, the RCTAdetected, the following will be dis-function is on the Center Display.■ Outside rear view mirror indicator visi-Example: Vehicles are approaching frombilityboth sides of the vehicleIn strong sunlight, the outside rear view mir-ror indicator may be difficult to see.■ Hearing the RCTA buzzerThe RCTA buzzer may be difficult to hearover loud noises, such as if the audio system4volume is high.■ Rear side radar sensorsDrivingP.303RCTA function■ RCTA function detection areas■ Operation of the RCTA functionThe areas that vehicles can bedetected in are outlined RCTA function uses rear sideradar sensors to detect vehiclesapproaching from the right or left atthe rear of the vehicle and alerts thedriver of the presence of such vehiclesby flashing the outside rear view mirrorindicators and sounding a buzzer can alert the driver offaster vehicles approaching from far-ther away.
4-5. Using the driving support systems
329
(P.556)
A Approaching vehicles
When the RCTA function is off, the
B Detection areas of approaching
driving assist information indicator
vehicles
(P.95) will illuminate and a message
■ RCTA icon display
will be displayed on the multi-informa-
When a vehicle approaching from the
tion display. Each time the power
right or left at the rear of the vehicle is
switch is turned to ON, the RCTA
detected, the following will be dis-
function is enabled.
played on the Center Display.
■ Outside rear view mirror indicator visi-
Example: Vehicles are approaching from
bility
both sides of the vehicle
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear
over loud noises, such as if the audio system
4
volume is high.
■ Rear side radar sensors
Driving
P.303
RCTA function
■ RCTA function detection areas
■ Operation of the RCTA function
The areas that vehicles can be
detected in are outlined below.
The RCTA function uses rear side
radar sensors to detect vehicles
approaching from the right or left at
the rear of the vehicle and alerts the
driver of the presence of such vehicles
by flashing the outside rear view mirror
indicators and sounding a buzzer.
The buzzer can alert the driver of
faster vehicles approaching from far-
ther away.
3304-5. Using the driving support systemsExample:■ Conditions under which the system willnot detect a vehicleApproaching vehi-The RCTA function is not designed toA Approximatedetect the following types of vehiclescle speedalert distanceand/or objects:56 km/h (34 mph)● Vehicles approaching from directly30 m (98 ft.)(fast)behind● Vehicles backing up in a parking space8 km/h (5 mph)4 m (13 ft.)next to your vehicle(slow)● Vehicles that the sensors cannot detectdue to obstructions■ The RCTA function is operational whenThe RCTA function operates when all of thefollowing conditions are met:● The power switch is in ON.● The RCTA function is on.● The shift position is in R.● The vehicle speed is less than approxi-mately 15 km/h (9 mph).● Guardrails, walls, signs, parked vehicles● The approaching vehicle speed isand similar stationary objects *between approximately 8 km/h (5 mph)● Small motorcycles, bicycles, pedestrians,and 56 km/h (34 mph).etc. *■ Setting the buzzer volume● Vehicles moving away from your vehicleThe buzzer volume of the RCTA, Lexus● Vehicles approaching from the parkingparking assist-sensor and RCD (ifspaces next to your vehicle *equipped) can be adjusted all togetherthrough a customize setting. (P.556)● The distance between the sensor and■ Muting a buzzer temporarilyapproaching vehicle gets too close*When an object is detected, the temporary: Depending on the conditions, detectionmute switch is displayed on the Center Dis-of a vehicle and/or object may .■ Situations in which the system may notSelect the switch to mute the buzzer of theoperate properlyLexus parking assist-sensor, RCTA andRCD (if equipped) all RCTA function may not detect vehiclescorrectly in the following situations:Mute will be canceled automatically in thefollowing situations:● When the sensor is misaligned due to astrong impact to the sensor or its sur-● When the shift position is area● When the vehicle speed exceeds a cer-● When mud, snow, ice, a
330
4-5. Using the driving support systems
Example:
■ Conditions under which the system will
not detect a vehicle
Approaching vehi-
The RCTA function is not designed to
A Approximate
detect the following types of vehicles
cle speed
alert distance
and/or objects:
56 km/h (34 mph)
● Vehicles approaching from directly
30 m (98 ft.)
(fast)
behind
● Vehicles backing up in a parking space
8 km/h (5 mph)
4 m (13 ft.)
next to your vehicle
(slow)
● Vehicles that the sensors cannot detect
due to obstructions
■ The RCTA function is operational when
The RCTA function operates when all of the
following conditions are met:
● The power switch is in ON.
● The RCTA function is on.
● The shift position is in R.
● The vehicle speed is less than approxi-
mately 15 km/h (9 mph).
● Guardrails, walls, signs, parked vehicles
● The approaching vehicle speed is
and similar stationary objects *
between approximately 8 km/h (5 mph)
● Small motorcycles, bicycles, pedestrians,
and 56 km/h (34 mph).
etc. *
■ Setting the buzzer volume
● Vehicles moving away from your vehicle
The buzzer volume of the RCTA, Lexus
● Vehicles approaching from the parking
parking assist-sensor and RCD (if
spaces next to your vehicle *
equipped) can be adjusted all together
through a customize setting. (P.556)
● The distance between the sensor and
■ Muting a buzzer temporarily
approaching vehicle gets too close
*
When an object is detected, the temporary
: Depending on the conditions, detection
mute switch is displayed on the Center Dis-
of a vehicle and/or object may occur.
play.
■ Situations in which the system may not
Select the switch to mute the buzzer of the
operate properly
Lexus parking assist-sensor, RCTA and
RCD (if equipped) all together.
The RCTA function may not detect vehicles
correctly in the following situations:
Mute will be canceled automatically in the
following situations:
● When the sensor is misaligned due to a
strong impact to the sensor or its sur-
● When the shift position is changed.
rounding area
● When the vehicle speed exceeds a cer-
● When mud, snow, ice, a sticker, etc. is
tain speed.
covering the sensor or surrounding area
● When there is a malfunction in a sensor
on the rear bumper
or the system is temporarily unavailable.
● When driving on a wet road surface, such
● When the operating function is disabled
as in a puddle, while in inclement
manually.
weather, such as heavy rain, snow, fog,
etc.
● When the power switch is turned off.
4-5. Using the driving support systems331● When multiple vehicles are approaching● When a sensor or the area around a sen-with only a small gap between each vehi-sor is extremely hot or coldcle● If the suspension has been modified or● When a vehicle is approaching at hightires of a size other than specified arespeedinstalled● When equipment that may obstruct a● If the front of the vehicle is raised or low-sensor is installed, such as a towing eye-ered due to the carried loadlet, bumper protector (an additional trim● When turning while backing upstrip, etc.), bicycle carrier, or snow plow● When backing up on a slope with a sharpchange in grade● When a vehicle turns into the detectionarea4Driving● When backing out of a sharp angle park-■ Situations in which the system maying spotoperate even if there is no possibility of acollisionInstances of the RCTA function unneces-sarily detecting a vehicle and/or object mayincrease in the following situations:● When the parking space faces a streetand vehicles are being driven on thestreet● Immediately after the RCTA function isturned on● Immediately after the hybrid system isstarted with the RCTA function on● When the sensors cannot detect a vehi-cle due to obstructions● When towing with the vehicle● When there is a significant difference in● When the distance between your vehicleheight between your vehicle and theand metal objects, such as a guardrail,vehicle that enters the detection areawall, sign, or parked vehicle, which may
4-5. Using the driving support systems
331
● When multiple vehicles are approaching
● When a sensor or the area around a sen-
with only a small gap between each vehi-
sor is extremely hot or cold
cle
● If the suspension has been modified or
● When a vehicle is approaching at high
tires of a size other than specified are
speed
installed
● When equipment that may obstruct a
● If the front of the vehicle is raised or low-
sensor is installed, such as a towing eye-
ered due to the carried load
let, bumper protector (an additional trim
● When turning while backing up
strip, etc.), bicycle carrier, or snow plow
● When backing up on a slope with a sharp
change in grade
● When a vehicle turns into the detection
area
4
Driving
● When backing out of a sharp angle park-
■ Situations in which the system may
ing spot
operate even if there is no possibility of a
collision
Instances of the RCTA function unneces-
sarily detecting a vehicle and/or object may
increase in the following situations:
● When the parking space faces a street
and vehicles are being driven on the
street
● Immediately after the RCTA function is
turned on
● Immediately after the hybrid system is
started with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing with the vehicle
● When there is a significant difference in
● When the distance between your vehicle
height between your vehicle and the
and metal objects, such as a guardrail,
vehicle that enters the detection area
wall, sign, or parked vehicle, which may
3324-5. Using the driving support systemsreflect electrical waves toward the rear of● Gratings and guttersthe vehicle, is short● When a sensor or the area around a sen-sor is extremely hot or cold● If the suspension has been modified ortires of a size other than specified areinstalled● If the front of the vehicle is raised or low-ered due to the carried load● When towing with the vehicle● When equipment that may obstruct asensor is installed, such as a towing eye-let, bumper protector (an additional trimstrip, etc.), bicycle carrier, or snow plow● When a vehicle passes by the side of yourvehicle● When a detected vehicle turns whileapproaching the vehicle● When there are spinning objects nearyour vehicle such as the fan of an air con-ditioning unit● When water is splashed or sprayedtoward the rear bumper, such as from asprinkler● Moving objects (flags, exhaust fumes,large rain droplets or snowflakes, rainwater on the road surface, etc.)● When the distance between your vehicleand a guardrail, wall, etc., that enters thedetection area is short
332
4-5. Using the driving support systems
reflect electrical waves toward the rear of
● Gratings and gutters
the vehicle, is short
● When a sensor or the area around a sen-
sor is extremely hot or cold
● If the suspension has been modified or
tires of a size other than specified are
installed
● If the front of the vehicle is raised or low-
ered due to the carried load
● When towing with the vehicle
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow
● When a vehicle passes by the side of your
vehicle
● When a detected vehicle turns while
approaching the vehicle
● When there are spinning objects near
your vehicle such as the fan of an air con-
ditioning unit
● When water is splashed or sprayed
toward the rear bumper, such as from a
sprinkler
● Moving objects (flags, exhaust fumes,
large rain droplets or snowflakes, rain
water on the road surface, etc.)
● When the distance between your vehicle
and a guardrail, wall, etc., that enters the
detection area is short
4-5. Using the driving support systems333RCD (Rear Camera Detec-● Do not attach accessories or stickersto the ) *● Do not install market protection parts(bumper trim, etc.) to the rear bumper.*: If equipped● Maintain suitable tire air the vehicle is backing up, therear camera detection function can● Make sure the back door is pedestrians in the detectionarea behind the vehicle. If a pedes-■ When to disable the RCD functiontrian is detected, a buzzer willIn the following situations, disable thesystem. The RCD function may not oper-sound and an icon will be displayedate properly, possibly leading to an acci-on the Center Display to inform of the pedestrian.● The contents mentioned above are ● Suspensions other than the genuine■ Cautions regarding the use of theparts are installed.4systemThe recognition and control capabilitiesSystem componentDrivingfor this system are driver should always drive safely byLocation of the rear cameraalways being responsible without overrelying on the system and have an under-standing of the surrounding situations.■ To ensure the system can operateproperlyObserve the following, otherwise there isthe danger that could lead to an acci-dent.● Always clean the camera withoutdamaging it.● Do not install market parts (such asIlluminated license plate, fog lamps,RCD displayetc.) in the camera vicinity.● Do not subject the camera vicinity tostrong impacts. If the vicinity is sub-jected to a strong impact, have thevehicle inspected by any authorizedLexus retailer or Lexus authorizedrepairer, or any reliable repairer.● Do not disassemble, remodel or paintthe camera.
4-5. Using the driving support systems
333
RCD (Rear Camera Detec-
● Do not attach accessories or stickers
to the camera.
tion) *
● Do not install market protection parts
(bumper trim, etc.) to the rear bumper.
*
: If equipped
● Maintain suitable tire air pressure.
When the vehicle is backing up, the
rear camera detection function can
● Make sure the back door is completely
closed.
detect pedestrians in the detection
area behind the vehicle. If a pedes-
■ When to disable the RCD function
trian is detected, a buzzer will
In the following situations, disable the
system. The RCD function may not oper-
sound and an icon will be displayed
ate properly, possibly leading to an acci-
on the Center Display to inform the
dent.
driver of the pedestrian.
● The contents mentioned above are not
observed.
WARNING
● Suspensions other than the genuine
■ Cautions regarding the use of the
parts are installed.
4
system
The recognition and control capabilities
System component
Driving
for this system are limited.
The driver should always drive safely by
Location of the rear camera
always being responsible without over
relying on the system and have an under-
standing of the surrounding situations.
■ To ensure the system can operate
properly
Observe the following, otherwise there is
the danger that could lead to an acci-
dent.
● Always clean the camera without
damaging it.
● Do not install market parts (such as
Illuminated license plate, fog lamps,
RCD display
etc.) in the camera vicinity.
● Do not subject the camera vicinity to
strong impacts. If the vicinity is sub-
jected to a strong impact, have the
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● Do not disassemble, remodel or paint
the camera.
3344-5. Using the driving support systemsA Pedestrian detection iconA If a pedestrian is detected in areaDisplayed automatically when a pedestrianAis detected behind the : Sounds repeatedlyPedestrian detection icon: BlinksTurning the RCD function on/offB If a pedestrian is detected in areaThe RCD function can be enabled/dis-Babled through a customize (When the vehicle is sta-(P.556)tionary): Sounds 3 timesBuzzer (When the vehicle is back-When the RCD function is disabled, theing up, when a pedestriandriving assist information indicator(P.95) illuminates, and a message is dis-approaches the rear of the vehicle):played on the multi-information repeatedlyPedestrian detection icon: BlinksEach time the power switch is turned offthen changed to ON, the RCD functionC If the system determines that yourwill be enabled may collide with a pedes-trian in area CWhen a pedestrian is detectedBuzzer: Sounds repeatedlyIf a pedestrian is in the area behind thePedestrian detection icon: Blinksvehicle or if the rear camera detectedthat a pedestrian is approaching the■ The rear camera detection function isoperational whenvehicle from behind, the system urges● The power switch is in from the driver by sounding● RCD function is buzzer and displaying the detec-● The shift position is in of a pedestrian on the Center Dis-● Advanced Park * is not as follows:*: If equipped■ Setting the buzzer volumeThe buzzer volume of the Lexus parkingassist-sensor, RCTA, and RCD can all bechanged at once from the customize set-tings. (P.556)■ Muting a buzzer temporarilyWhen an object is detected, the temporarymute switch is displayed on the Center the switch to mute a buzzer of theLexus parking assist-sensor, RCTA, andRCD all together.
334
4-5. Using the driving support systems
A Pedestrian detection icon
A If a pedestrian is detected in area
Displayed automatically when a pedestrian
A
is detected behind the vehicle.
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
Turning the RCD function on/off
B If a pedestrian is detected in area
The RCD function can be enabled/dis-
B
abled through a customize setting.
Buzzer (When the vehicle is sta-
(P.556)
tionary): Sounds 3 times
Buzzer (When the vehicle is back-
When the RCD function is disabled, the
ing up, when a pedestrian
driving assist information indicator
(P.95) illuminates, and a message is dis-
approaches the rear of the vehicle):
played on the multi-information display.
Sounds repeatedly
Pedestrian detection icon: Blinks
Each time the power switch is turned off
then changed to ON, the RCD function
C If the system determines that your
will be enabled automatically.
vehicle may collide with a pedes-
trian in area C
When a pedestrian is detected
Buzzer: Sounds repeatedly
If a pedestrian is in the area behind the
Pedestrian detection icon: Blinks
vehicle or if the rear camera detected
that a pedestrian is approaching the
■ The rear camera detection function is
operational when
vehicle from behind, the system urges
● The power switch is in ON.
caution from the driver by sounding
● RCD function is on.
the buzzer and displaying the detec-
● The shift position is in R.
tion of a pedestrian on the Center Dis-
● Advanced Park * is not operating.
play as follows:
*
: If equipped
■ Setting the buzzer volume
The buzzer volume of the Lexus parking
assist-sensor, RCTA, and RCD can all be
changed at once from the customize set-
tings. (P.556)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the Center Dis-
play.
Select the switch to mute a buzzer of the
Lexus parking assist-sensor, RCTA, and
RCD all together.
4-5. Using the driving support systems335Mute will be automatically canceled in theparking lotfollowing situations:• When the camera position and directionare deviated● When the shift position is changed.• When a towing hook is attached● When the vehicle speed exceeds a cer-• When water droplets are flowing on thetain lens• When the vehicle height is extremely● When there is a malfunction in a sensorchanged (nose up, nose down, etc.)or the system is temporarily unavailable.• When tire chains or an emergency tire● When the operating function is disabledpuncture repair kit are usedmanually.• When the suspension has been lowered● When the power switch is turned tires that have a different size than thegenuine tires are installed■ Situations in which the system may not• When an aftermarket part (backlitoperate properlylicense plate, fog light, etc.) is installed● Some pedestrians, such as the following,near the rear cameramay not be detected by the rear camera• If a bumper protector, such as an addi-detection function, preventing the func-tional trim strip, is installed to the reartion from operating properly:bumper• Pedestrians who are bending forward or• When towing with the vehiclesquatting4■ Situations in which the system may• Pedestrians who are lying downoperate unexpectedly• Pedestrians who are running• Pedestrians who suddenly appear from● Even though there are no pedestrians inDrivingthe shadow of the vehicle or a buildingthe detection area, some objects, such as• Pedestrians who are riding movingthe following, may be detected, possiblyobjects such as a bicycle or skateboardcausing the rear camera detection func-• Pedestrians wearing oversized clothingtion to as a rain coat, long skirt, etc., making• Three dimensional objects, such as atheir silhouette obscurepole, traffic cone, fence, or parked vehi-• Pedestrians whose body is partially hid-cleden by an object, such as a cart or• Moving objects, such as a car or motor-umbrellac
4-5. Using the driving support systems
335
Mute will be automatically canceled in the
parking lot
following situations:
• When the camera position and direction
are deviated
● When the shift position is changed.
• When a towing hook is attached
● When the vehicle speed exceeds a cer-
• When water droplets are flowing on the
tain speed.
camera lens
• When the vehicle height is extremely
● When there is a malfunction in a sensor
changed (nose up, nose down, etc.)
or the system is temporarily unavailable.
• When tire chains or an emergency tire
● When the operating function is disabled
puncture repair kit are used
manually.
• When the suspension has been lowered
● When the power switch is turned off.
or tires that have a different size than the
genuine tires are installed
■ Situations in which the system may not
• When an aftermarket part (backlit
operate properly
license plate, fog light, etc.) is installed
● Some pedestrians, such as the following,
near the rear camera
may not be detected by the rear camera
• If a bumper protector, such as an addi-
detection function, preventing the func-
tional trim strip, is installed to the rear
tion from operating properly:
bumper
• Pedestrians who are bending forward or
• When towing with the vehicle
squatting
4
■ Situations in which the system may
• Pedestrians who are lying down
operate unexpectedly
• Pedestrians who are running
• Pedestrians who suddenly appear from
● Even though there are no pedestrians in
Driving
the shadow of the vehicle or a building
the detection area, some objects, such as
• Pedestrians who are riding moving
the following, may be detected, possibly
objects such as a bicycle or skateboard
causing the rear camera detection func-
• Pedestrians wearing oversized clothing
tion to operate.
such as a rain coat, long skirt, etc., making
• Three dimensional objects, such as a
their silhouette obscure
pole, traffic cone, fence, or parked vehi-
• Pedestrians whose body is partially hid-
cle
den by an object, such as a cart or
• Moving objects, such as a car or motor-
umbrella
cycle
• Pedestrians which are obscured by dark-
• Objects moving toward your vehicle
ness, such as at night
when backing up, such as flags or pud-
dles (or airborne matter, such as smoke,
● In some situations, such as the following,
steam, rain, or snow)
pedestrians may not be detected by the
• Cobblestone or gravel roads, tram rails,
rear camera detection function, prevent-
road repairs, white lines, pedestrian
ing the function from operating properly:
crossings or fallen leaves on the road
• When backing up in inclement weather
• Metal covers (gratings), such as those
(rain, snow, fog, etc.)
used for drainage ditches
• The lens is dirty (by dirt or snow-melting
• Objects reflected in a puddle or on a wet
agent, etc.) or scratched
road surface
• When a very bright light, such as the sun,
• Shadows on the road
or the headlights of another vehicle,
shines directly into the rear camera
● In some situations, such as the following,
• When backing up in a place where the
the rear camera detection function may
surrounding brightness changes sud-
operate even though there are no pedes-
denly, such as at the entrance or exit of a
trians in the detection area.
garage or underground parking lot
• When backing up toward the roadside or
• When backing up in a dim environment
a bump on the road
such as during dusk or in an underground
• When backing up toward an
3364-5. Using the driving support systemsincline/declinePKSB (Parking Support• When the vehicle height is extremelyBrake) *changed (nose up, nose down, etc.)• When an aftermarket part (backlitlicense plate, fog light, etc.) is installed*: If equippednear the rear camera• If a bumper protector, such as an addi-The PKSB (Parking Support Brake)tional trim strip, is installed to the rearis a system that issues warnings andbumper• If the orientation of the rear camera hasautomatically performs braking tobeen changed due to a collision or otherhelp reduce collision damage withimpact, or removal and installationoperation targets that were• If a towing eyelet is installed to the rear ofthe vehicledetected when traveling at a low• When water is flowing over the rear cam-speed such as when lens• The lens is dirty (by dirt or snow-meltingagent, etc.)PKSB (Parking Support Brake)• If there is a flashing light in the detectionarea, such as the emergency flashers ofsystemanother vehicle• When tire chains or an emergency tireThe system has detected the followingpuncture repair kit are usedas operation targets. (The operation• When towing with the vehicletargets vary depending on the func-● Situations in which the rear cameradetection function may be difficult totion.)notice Parking Support Brake function• The buzzer may be difficult to hear if thesurrounding area is noisy or the audio(static objects front and rear of thesystem volume is ):P.340• If the temperature in the cabin isextremely high or low, the Center Dis- Parking Support Brake functionplay may not operate correctly.(moving vehicles rear of the vehicle)(if equipped):P.344 Parking Support Brake function(pedestrians rear of the vehicle) (ifequipped):P.346 Parking Support Brake function(static objects around the vehicle)(vehicles with AdvancedPark):P.340
336
4-5. Using the driving support systems
incline/decline
PKSB (Parking Support
• When the vehicle height is extremely
Brake) *
changed (nose up, nose down, etc.)
• When an aftermarket part (backlit
license plate, fog light, etc.) is installed
*
: If equipped
near the rear camera
• If a bumper protector, such as an addi-
The PKSB (Parking Support Brake)
tional trim strip, is installed to the rear
is a system that issues warnings and
bumper
• If the orientation of the rear camera has
automatically performs braking to
been changed due to a collision or other
help reduce collision damage with
impact, or removal and installation
operation targets that were
• If a towing eyelet is installed to the rear of
the vehicle
detected when traveling at a low
• When water is flowing over the rear cam-
speed such as when parking.
era lens
• The lens is dirty (by dirt or snow-melting
agent, etc.)
PKSB (Parking Support Brake)
• If there is a flashing light in the detection
area, such as the emergency flashers of
system
another vehicle
• When tire chains or an emergency tire
The system has detected the following
puncture repair kit are used
as operation targets. (The operation
• When towing with the vehicle
targets vary depending on the func-
● Situations in which the rear camera
detection function may be difficult to
tion.)
notice
 Parking Support Brake function
• The buzzer may be difficult to hear if the
surrounding area is noisy or the audio
(static objects front and rear of the
system volume is high.
vehicle):P.340
• If the temperature in the cabin is
extremely high or low, the Center Dis-
 Parking Support Brake function
play may not operate correctly.
(moving vehicles rear of the vehicle)
(if equipped):P.344
 Parking Support Brake function
(pedestrians rear of the vehicle) (if
equipped):P.346
 Parking Support Brake function
(static objects around the vehicle)
(vehicles with Advanced
Park):P.340
4-5. Using the driving support systems337● If the suspension has been modified orWARNINGtires of a size other than specified are■ Cautions regarding the use of theinstalledsystem● If the front of the vehicle is raised orDo not overly rely on the system, aslowered due to the carried loaddoing so may lead to an drive while checking the safety of● When equipment such as a towingthe surroundings of the , transport hook, bumper protec-tor, bumper trim, bicycle carrier orDepending on the vehicle and road con-snow-removal device (snow plow) isditions, weather, etc., the system may notinstalled near the detection capabilities of sensors and● When using automatic car washingradars are limited. Always drive whiledeviceschecking the safety of the surroundings● If the vehicle cannot be driven in a sta-of the manner, such as when the vehicle● The driver is solely responsible for safehas been in an accident or is malfunc-driving. Always drive carefully, takingtioningcare to observe your surroundings.● When the vehicle is driven in a sporty4The Parking Support Brake system ismanner or off-roaddesigned to provide support to lessenthe severity of collisions. However, it● When the tires are not properlyDrivingmay not operate in some ● The Parking Support Brake system is● When the tires are very wornnot designed to stop the vehicle com-pletely. Additionally, even if the system● When tire chains, a compact spare tirehas stopped the vehicle, it is necessaryor an emergency tire puncture repairto depress the brake pedal immedi-kit are usedately as brake control will be canceledafter approximately 2 seconds.● When towing with the vehicle● It is extremely dangerous to check the■ Precautions for the suspensionsystem operations by intentionallyDo not modify the suspension of thedriving the vehicle into the direction ofvehicle. If the height or tilt of the vehicle isa wall, etc. Never attempt such , the
4-5. Using the driving support systems
337
● If the suspension has been modified or
WARNING
tires of a size other than specified are
■ Cautions regarding the use of the
installed
system
● If the front of the vehicle is raised or
Do not overly rely on the system, as
lowered due to the carried load
doing so may lead to an accident.
Always drive while checking the safety of
● When equipment such as a towing
the surroundings of the vehicle.
hook, transport hook, bumper protec-
tor, bumper trim, bicycle carrier or
Depending on the vehicle and road con-
snow-removal device (snow plow) is
ditions, weather, etc., the system may not
installed near the sensor
operate.
The detection capabilities of sensors and
● When using automatic car washing
radars are limited. Always drive while
devices
checking the safety of the surroundings
● If the vehicle cannot be driven in a sta-
of the vehicle.
ble manner, such as when the vehicle
● The driver is solely responsible for safe
has been in an accident or is malfunc-
driving. Always drive carefully, taking
tioning
care to observe your surroundings.
● When the vehicle is driven in a sporty
4
The Parking Support Brake system is
manner or off-road
designed to provide support to lessen
the severity of collisions. However, it
● When the tires are not properly
Driving
may not operate in some situations.
inflated
● The Parking Support Brake system is
● When the tires are very worn
not designed to stop the vehicle com-
pletely. Additionally, even if the system
● When tire chains, a compact spare tire
has stopped the vehicle, it is necessary
or an emergency tire puncture repair
to depress the brake pedal immedi-
kit are used
ately as brake control will be canceled
after approximately 2 seconds.
● When towing with the vehicle
● It is extremely dangerous to check the
■ Precautions for the suspension
system operations by intentionally
Do not modify the suspension of the
driving the vehicle into the direction of
vehicle. If the height or tilt of the vehicle is
a wall, etc. Never attempt such actions.
changed, the sensors may not be able to
detect detectable objects and the system
■ When to disable the Parking Support
may not operate correctly, possibly lead-
Brake
ing to an accident.
In the following situations, disable the
Parking Support Brake as the system
may operate even though there is no
Enabling/Disabling the Parking
possibility of a collision.
Support Brake
● When inspecting the vehicle using a
chassis roller, chassis dynamo or free
The Parking Support Brake function
roller
can be enabled/disabled through a
● When loading the vehicle onto a boat,
customize setting. (P.556)
truck or other transport vessel
When the PKSB (Parking Support
3384-5. Using the driving support systemsBrake) is disabled, the driving assistBuzzer: Does not soundinformation indicator (P.95) illumi- Hybrid system output restrictionnates, and a message is displayed oncontrol is operating (outputthe multi-information as much as possible)If the PKSB (Parking Support Brake) isThe system has determined that stronger-switched to OFF (disabled), the systemthan-normal brake operation is not be re-enabled until ONMessage example on the Center Display(enabled) is selected again from the(vehicles with a panoramic view monitor orcustomize setting (P.556).parking assist monitor with RCD [RearCamera Detection]): “BRAKE!”(It remains off even if the power switchis turned to ON again after the powerMessage example on the multi-informa-switch has been turned off.)tion display: “BRAKE!”Driving assist information indicator: NotilluminatedDisplay and buzzer for hybridsystem output restriction controlBuzzer: Short beepand brake control Brake control is operatingThe system determined that emergencyIf the hybrid system output restriction con-braking is or brake control operates, a buzzerwill sound and a message that indicatesMessage example on the Center Displaylimited acceleration or prompts the driver(vehicles with a panoramic view monitor orto brake will be displayed on the Centerparking assist monitor with RCD [RearDisplay and multi-information display, toCamera Detection]): “BRAKE!”alert the example on the multi-informa-Depending on the situation, output restric-tion display: “BRAKE!”tion control operates to either limit accel-Driving assist information indicator: Noteration or restrict output as much : Short beep Hybrid system output restriction Vehicle stopped by system opera-control is operating (accelerationtionrestriction)The vehicle has been stopped by brakeAcceleration greater than a certaincontrol is restricted by the syste
338
4-5. Using the driving support systems
Brake) is disabled, the driving assist
Buzzer: Does not sound
information indicator (P.95) illumi-
 Hybrid system output restriction
nates, and a message is displayed on
control is operating (output
the multi-information display.
restricted as much as possible)
If the PKSB (Parking Support Brake) is
The system has determined that stronger-
switched to OFF (disabled), the system
than-normal brake operation is necessary.
will not be re-enabled until ON
Message example on the Center Display
(enabled) is selected again from the
(vehicles with a panoramic view monitor or
customize setting (P.556).
parking assist monitor with RCD [Rear
Camera Detection]): “BRAKE!”
(It remains off even if the power switch
is turned to ON again after the power
Message example on the multi-informa-
switch has been turned off.)
tion display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Display and buzzer for hybrid
system output restriction control
Buzzer: Short beep
and brake control
 Brake control is operating
The system determined that emergency
If the hybrid system output restriction con-
braking is necessary.
trol or brake control operates, a buzzer
will sound and a message that indicates
Message example on the Center Display
limited acceleration or prompts the driver
(vehicles with a panoramic view monitor or
to brake will be displayed on the Center
parking assist monitor with RCD [Rear
Display and multi-information display, to
Camera Detection]): “BRAKE!”
alert the driver.
Message example on the multi-informa-
Depending on the situation, output restric-
tion display: “BRAKE!”
tion control operates to either limit accel-
Driving assist information indicator: Not
eration or restrict output as much as
illuminated
possible.
Buzzer: Short beep
 Hybrid system output restriction
 Vehicle stopped by system opera-
control is operating (acceleration
tion
restriction)
The vehicle has been stopped by brake
Acceleration greater than a certain
control operation.
amount is restricted by the system.
Message example on the Center Display
Center Display: No warning displayed
(vehicles with a panoramic view monitor or
Message example on the multi-informa-
parking assist monitor with RCD [Rear
tion display: “Object Detected Accelera-
Camera Detection]): “Switch to Brake”
tion Reduced”
Message example on the multi-informa-
Driving assist information indicator: Not
tion display: “Accelerator Pedal is Pressed
illuminated
Press Brake Pedal”, “Press Brake Pedal”
4-5. Using the driving support systems339Driving assist information indicator: Illumi-natedBuzzer: Sounds repeatedlySystem overviewIf the Parking Support Brake deter-mines that a collision with a detectedobject or pedestrian is possible, theA Hybrid system outputhybrid system output will be restrictedto restrain any increase in the vehicleB Braking forcespeed. (Hybrid system output restric-C Timetion control: See figure 2 below.)Additionally, if the accelerator pedalD Hybrid system output restrictioncontinues to be depressed, the brakescontrol begins operating (Systemwill be applied automatically to reducedetermines that possibility of colli-4the vehicle speed. (Brake control: Seesion with detected object is high)figure 3.) Figure 3: When hybrid system out-Driving Figure 1: When the PKSB (Parkingput restriction control and brakeSupport Brake) is not operatingcontrol operatesA Hybrid system outputA Hybrid system outputB Braking forceB Braking forceC TimeC Time Figure 2: When hybrid system out-D Hybrid system output restrictionput restriction control operatescontrol begins operating (Systemdetermines that possibility of colli-sion with detected object is high)E Brake control begins operating
4-5. Using the driving support systems
339
Driving assist information indicator: Illumi-
nated
Buzzer: Sounds repeatedly
System overview
If the Parking Support Brake deter-
mines that a collision with a detected
object or pedestrian is possible, the
A Hybrid system output
hybrid system output will be restricted
to restrain any increase in the vehicle
B Braking force
speed. (Hybrid system output restric-
C Time
tion control: See figure 2 below.)
Additionally, if the accelerator pedal
D Hybrid system output restriction
continues to be depressed, the brakes
control begins operating (System
will be applied automatically to reduce
determines that possibility of colli-
4
the vehicle speed. (Brake control: See
sion with detected object is high)
figure 3.)
 Figure 3: When hybrid system out-
Driving
 Figure 1: When the PKSB (Parking
put restriction control and brake
Support Brake) is not operating
control operates
A Hybrid system output
A Hybrid system output
B Braking force
B Braking force
C Time
C Time
 Figure 2: When hybrid system out-
D Hybrid system output restriction
put restriction control operates
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
E Brake control begins operating
3404-5. Using the driving support systems(System determines that possibilityParking Support Brakeof collision with detected object isfunction (static objects frontextremely high)and rear of the vehicle/staticobjects around the vehicle) *■ If the Parking Support Brake has oper-ated* : If equippedIf the vehicle is stopped due to operation ofthe Parking Support Brake, the ParkingIf the sensors detect a static object,Support Brake will be disabled and the driv-such as a wall, in the traveling direc-ing assist information indicator will illumi-nate. In addition, even when the PKSBtion of the vehicle and the system(Parking Support Brake) operates, thedetermines that a collision maybrake control is canceled after approxi-occur due to the vehicle suddenlymately 2 seconds to start off. Furthermore,the brake control also can be canceled bymoving forward due to an acciden-depressing the brake pedal. Depressing thetal accelerator pedal operation, theaccelerator pedal again after that allows thevehicle moving the unintendedvehicle to start due to the wrong shift■ Re-enabling the Parking Support Brakeposition being selected, or whileTo re-enable the Parking Support Brakeparking or traveling at low speeds,when it is disabled due to operation of thePKSB (Parking Support Brake), eitherthe system will operate to lessenenable the system again, or turn the powerthe impact with the detected staticswitch off and then back to and reduce the resultingAdditionally, if any of the following are met, the system will be re-enabledautomatically and the driving assist informa-tion indicator will turn off (P.95):Examples of function operation● The P shift position is selected(static objects front and rear of● Drive with no operation targets in thetraveling direction of the vehiclethe vehicle)● Change the traveling direction of thevehicleThis function will operate in situations■ Buzzersuch as the following if an object isdetected in the traveling directio
340
4-5. Using the driving support systems
(System determines that possibility
Parking Support Brake
of collision with detected object is
function (static objects front
extremely high)
and rear of the vehicle/static
objects around the vehicle) *
■ If the Parking Support Brake has oper-
ated
* : If equipped
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
If the sensors detect a static object,
Support Brake will be disabled and the driv-
such as a wall, in the traveling direc-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
tion of the vehicle and the system
(Parking Support Brake) operates, the
determines that a collision may
brake control is canceled after approxi-
occur due to the vehicle suddenly
mately 2 seconds to start off. Furthermore,
the brake control also can be canceled by
moving forward due to an acciden-
depressing the brake pedal. Depressing the
tal accelerator pedal operation, the
accelerator pedal again after that allows the
vehicle moving the unintended
vehicle to start off.
direction due to the wrong shift
■ Re-enabling the Parking Support Brake
position being selected, or while
To re-enable the Parking Support Brake
parking or traveling at low speeds,
when it is disabled due to operation of the
PKSB (Parking Support Brake), either
the system will operate to lessen
enable the system again, or turn the power
the impact with the detected static
switch off and then back to ON.
object and reduce the resulting
Additionally, if any of the following condi-
damage.
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.95):
Examples of function operation
● The P shift position is selected
(static objects front and rear of
● Drive with no operation targets in the
traveling direction of the vehicle
the vehicle)
● Change the traveling direction of the
vehicle
This function will operate in situations
■ Buzzer
such as the following if an object is
detected in the traveling direction of
Regardless of whether the Lexus parking
assist sensor is enabled or not (P.320), if
the vehicle.
the PKSB (Parking Support Brake) system
is enabled (P.337), the buzzer will sound
to notify the driver of the approximate dis-
tance to the object when the brake control
and the hybrid system output restriction
control are operated.
4-5. Using the driving support systems341■ When traveling at a low speed and■ When the vehicle moves forwardthe brake pedal is not depressed,due to the incorrect shift positionor is depressed latebeing selected4■ When the accelerator pedal isExamples of function operationdepressed excessivelyDriving(static objects around the vehi-cle) (vehicles with AdvancedPark)The system will operate in the followingsituations when a stationary object isdetected in the surrounding area.
4-5. Using the driving support systems
341
■ When traveling at a low speed and
■ When the vehicle moves forward
the brake pedal is not depressed,
due to the incorrect shift position
or is depressed late
being selected
4
■ When the accelerator pedal is
Examples of function operation
depressed excessively
Driving
(static objects around the vehi-
cle) (vehicles with Advanced
Park)
The system will operate in the following
situations when a stationary object is
detected in the surrounding area.
3424-5. Using the driving support systems■ When moving forward and a colli-WARNINGsion with a stationary object on the■ To ensure the system can operateinner side of a turn is likelyproperlyP.320■ If the Parking Support Brake functionoperates unnecessarily, such as at arailroad crossingP.340■ Notes when washing the vehicleP.321■ Side sensors and side cameras (vehi-cles with Advanced Park)In situations such as the following, Park-ing Support Brake function (staticobjects around the vehicle) may notoperate correctly, possibly leading to anaccident. Proceed carefully.■ When reversing and a collisionwith a stationary object on the● When starting off shortly after thepower switch is turned to ON and aouter side of a turn is likelysmall vehicle or other object whichcannot be detected by a front side sen-sor is next to the the situation shown in the followingillustration, even if the vehicle starts off,the vehicle on the left will not bedetected and the object warning functionwill not of sensors● When an object or person is in a posi-tion which cannot be detected by theP.319side sensors or side cameras.
342
4-5. Using the driving support systems
■ When moving forward and a colli-
WARNING
sion with a stationary object on the
■ To ensure the system can operate
inner side of a turn is likely
properly
P.320
■ If the Parking Support Brake function
operates unnecessarily, such as at a
railroad crossing
P.340
■ Notes when washing the vehicle
P.321
■ Side sensors and side cameras (vehi-
cles with Advanced Park)
In situations such as the following, Park-
ing Support Brake function (static
objects around the vehicle) may not
operate correctly, possibly leading to an
accident. Proceed carefully.
■ When reversing and a collision
with a stationary object on the
● When starting off shortly after the
power switch is turned to ON and a
outer side of a turn is likely
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off,
the vehicle on the left will not be
detected and the object warning function
will not operate.
Types of sensors
● When an object or person is in a posi-
tion which cannot be detected by the
P.319
side sensors or side cameras.
4-5. Using the driving support systems343(23.0 ft.) or lessWARNING● The R shift position is selected● When a vehicle, person, or other● After the shift position has been changedobject approaches the side of the vehi-from R to D, the vehicle has movedcle after the side sensors have com-approximately 7 m (23.0 ft.) or lesspleted scanning the areas along thesides of the vehicle.■ The Parking Support Brake function(static objects front and rear of the vehi-● When the outside rear view mirror iscle/static objects around the vehicle * ) stop operating when*● If the 12-volt battery was discharged or: Vehicles with Advanced Parkhas been removed and installed, foldThe function will stop operating if any of theand extend the outside rear view mir-following conditions are met:rors.● Hybrid system output restriction control• The Parking Support Brake is disabled.• The system determines that the collision■ The Parking Support Brake functionhas become avoidable with normal brake(static objects front and rear of the ) will operate when• The static object is no longer approxi-4The function will operate when the drivingmately 2 to 4 m (6 to 13 ft.) away from theassist information indicator is not illumi-vehicle or in the traveling direction of thenated (P.92) and all of the following are met:● Brake control● Hybrid system output restriction control• The Parking Support Brake is disabled.• The Parking Support Brake is enabled.• Approximately 2 seconds have elapsed• The vehicle speed is approximately 15since the vehicle was stopped by brakekm/h (9 mph) or .• There is a static object in the traveling• The brake pedal is depressed after thedirection of the vehicle and approxi-vehicle is stopped by brake 2 to 4 m (6 to 13 ft.) away.• The static object is no longer approxi-• The Parking Support Brake determinesmately 2 to 4 m (6 to 13 ft.) away from thethat a stronger-than-normal brake oper-vehicle or in t
4-5. Using the driving support systems
343
(23.0 ft.) or less
WARNING
● The R shift position is selected
● When a vehicle, person, or other
● After the shift position has been changed
object approaches the side of the vehi-
from R to D, the vehicle has moved
cle after the side sensors have com-
approximately 7 m (23.0 ft.) or less
pleted scanning the areas along the
sides of the vehicle.
■ The Parking Support Brake function
(static objects front and rear of the vehi-
● When the outside rear view mirror is
cle/static objects around the vehicle * )
folded.
will stop operating when
*
● If the 12-volt battery was discharged or
: Vehicles with Advanced Park
has been removed and installed, fold
The function will stop operating if any of the
and extend the outside rear view mir-
following conditions are met:
rors.
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The system determines that the collision
■ The Parking Support Brake function
has become avoidable with normal brake
(static objects front and rear of the vehi-
operation.
cle) will operate when
• The static object is no longer approxi-
4
The function will operate when the driving
mately 2 to 4 m (6 to 13 ft.) away from the
assist information indicator is not illumi-
vehicle or in the traveling direction of the
nated (P.92) and all of the following con-
vehicle.
Driving
ditions are met:
● Brake control
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The Parking Support Brake is enabled.
• Approximately 2 seconds have elapsed
• The vehicle speed is approximately 15
since the vehicle was stopped by brake
km/h (9 mph) or less.
control.
• There is a static object in the traveling
• The brake pedal is depressed after the
direction of the vehicle and approxi-
vehicle is stopped by brake control.
mately 2 to 4 m (6 to 13 ft.) away.
• The static object is no longer approxi-
• The Parking Support Brake determines
mately 2 to 4 m (6 to 13 ft.) away from the
that a stronger-than-normal brake oper-
vehicle or in the traveling direction of the
ation is necessary to avoid a collision.
vehicle.
● Brake control
■ Detection range of the Parking Support
• Hybrid system output restriction control
Brake function (static objects front and
is operating.
rear of the vehicle/static objects around
• The Parking Support Brake determines
the vehicle * )
that an immediate brake operation is
necessary to avoid a collision.
*
: Vehicles with Advanced Park
■ The Parking Support Brake function
The detection range of the Parking Support
(static objects around the vehicle) will
Brake function (static objects front and rear
operate when (vehicles with Advanced
of the vehicle/static objects around the
Park)
vehicle) differs from the detection range of
This function is operable when any of the
the Lexus parking assist-sensor (P.324).
following conditions is met in addition to the
Therefore, even if the Lexus parking assist-
operating conditions for static objects in
sensor detects an object and provides a
front and rear of the vehicle.
warning, the Parking Support Brake func-
tion (static objects front and rear of the
● After the hybrid system has been started,
vehicle/static objects around the vehicle)
the vehicle has moved approximately 7 m
3444-5. Using the driving support systemsmay not start Support Brake■ Situations in which the system may notfunction (moving vehiclesoperate properlyrear of the vehicle) *P.322■ Situations in which the system may*: If equippedoperate even if there is no possibility of acollisionIf a rear radar sensor detects aP.322vehicle approaching from the right■ Situations in which the system mayor left at the rear of the vehicle andoperate even though there is no possi-the system determines that the pos-bility of a collision (static objects aroundsibility of a collision is high, thisthe vehicle) (vehicles with AdvancedPark)function will perform brake controlIn addition to the situations in which staticto reduce the likelihood of anobjects in front and rear of the vehicleimpact with the approaching vehi-(P.343) may not be detected, not be detected by the sensors in thefollowing situations:● When moving sideways, such as whenExamples of the function opera-parallel parking (P.363)tion■ Detection of objects along the sides ofthe vehicle (static objects around theThis function will operate in situationsvehicle) (vehicles with Advanced Park)such as the following if a vehicle is● Objects along the sides of the vehicle arenot instantaneously detected. The loca-detected in the traveling direction oftion of objects in relation to the vehicle isthe after they are first detected bythe front or rear side sensors, or side■ When reversing, a vehicle iscameras. Therefore, after the powerapproaching and the brake pedal isswitch is changed to ON, even if anobject is along the side of the vehicle, itnot depressed, or is depressed latemay not be detected until the vehicle hasbeen driven a small amount and the sidesensors or side cameras completely scanthe areas along the sides of the vehicle.● If a vehicle, person, animal, etc., isdetected by a side sensors or side cam-eras, but then leaves the detection areaof the side sensors or side cameras
344
4-5. Using the driving support systems
may not start operating.
Parking Support Brake
■ Situations in which the system may not
function (moving vehicles
operate properly
rear of the vehicle) *
P.322
■ Situations in which the system may
*
: If equipped
operate even if there is no possibility of a
collision
If a rear radar sensor detects a
P.322
vehicle approaching from the right
■ Situations in which the system may
or left at the rear of the vehicle and
operate even though there is no possi-
the system determines that the pos-
bility of a collision (static objects around
sibility of a collision is high, this
the vehicle) (vehicles with Advanced
Park)
function will perform brake control
In addition to the situations in which static
to reduce the likelihood of an
objects in front and rear of the vehicle
impact with the approaching vehi-
(P.343) may not be detected, objects
cle.
may not be detected by the sensors in the
following situations:
● When moving sideways, such as when
Examples of the function opera-
parallel parking (P.363)
tion
■ Detection of objects along the sides of
the vehicle (static objects around the
This function will operate in situations
vehicle) (vehicles with Advanced Park)
such as the following if a vehicle is
● Objects along the sides of the vehicle are
not instantaneously detected. The loca-
detected in the traveling direction of
tion of objects in relation to the vehicle is
the vehicle.
estimated after they are first detected by
the front or rear side sensors, or side
■ When reversing, a vehicle is
cameras. Therefore, after the power
approaching and the brake pedal is
switch is changed to ON, even if an
object is along the side of the vehicle, it
not depressed, or is depressed late
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
● If a vehicle, person, animal, etc., is
detected by a side sensors or side cam-
eras, but then leaves the detection area
of the side sensors or side cameras, the
system will assume the object has not
moved.
Types of sensors
P.303
4-5. Using the driving support • The brake pedal is depressed after thevehicle is stopped by brake control.■ To ensure the system can operateproperly■ Situations in which the system may notP.303operate properlyP.330■ Situations in which the system may■ The Parking Support Brake functionoperate even if there is no possibility of a(moving vehicles rear of the vehicle) willcollisionoperate whenP.331The function will operate when the drivingassist information indicator is not illumi-nated (P.92) and all of the following con-ditions are met:● Hybrid system output restriction control• The Parking Support Brake is enabled.• The vehicle speed is approximately 15km/h (9 mph) or less.• Vehicles are approaching from the right4or left at the rear of the vehicle at a travel-ing speed of approximately 8 km/h (5mph) or • The shift position is in R.• The Parking Support Brake determinesthat a stronger than normal brake opera-tion is necessary to avoid a collision withan approaching vehicle.● Brake control• Hybrid system output restriction controlis operating.• The Parking Support Brake determinedthat an emergency brake operation wasnecessary to avoid a collision with a vehi-cle approaching from the rear.■ The Parking Support Brake function(moving vehicles rear of the vehicle) willstop operating whenThe function will stop operating if any of thefollowing conditions are met:● Hybrid system output restriction control• The Parking Support Brake is disabled.• The collision becomes avoidable withnormal brake operation.• A vehicle is no longer approaching fromthe right or left at the rear of the vehicle.● Brake control• The Parking Support Brake is disabled.• Approximately 2 seconds have elapsedsince the vehicle was stopped by brake
4-5. Using the driving support systems
345
control.
WARNING
• The brake pedal is depressed after the
vehicle is stopped by brake control.
■ To ensure the system can operate
properly
■ Situations in which the system may not
P.303
operate properly
P.330
■ Situations in which the system may
■ The Parking Support Brake function
operate even if there is no possibility of a
(moving vehicles rear of the vehicle) will
collision
operate when
P.331
The function will operate when the driving
assist information indicator is not illumi-
nated (P.92) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• Vehicles are approaching from the right
4
or left at the rear of the vehicle at a travel-
ing speed of approximately 8 km/h (5
mph) or more.
Driving
• The shift position is in R.
• The Parking Support Brake determines
that a stronger than normal brake opera-
tion is necessary to avoid a collision with
an approaching vehicle.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determined
that an emergency brake operation was
necessary to avoid a collision with a vehi-
cle approaching from the rear.
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The collision becomes avoidable with
normal brake operation.
• A vehicle is no longer approaching from
the right or left at the rear of the vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
3464-5. Using the driving support systemsdriver to brake when a pedestrian isParking Support Brakedetected in the detection area behindfunction (pedestrians rear ofthe vehicle) **: If equippedIf the rear camera sensor detects apedestrian behind the vehicle whilebacking up and the system deter-mines that the possibility of collid-ing with the detected pedestrian ishigh, a buzzer will sound. If the sys-tem determines that the possibilityA Pedestrian detection iconof colliding with the detectedB Example: “BRAKE!”pedestrian is extremely high, thebrakes will be applied automati-WARNINGcally to help reduce the impact of■ If the Parking Support Brake functionthe collision.(pedestrians rear of the vehicle)operates unnecessarilyDepress the brake pedal immediatelyExamples of system operationafter the Parking Support Brake function(pedestrians rear of the vehicle) oper-The system operates when anates. (Operation of the function is can-approaching pedestrian is detectedceled by depressing the brake pedal.)behind the vehicle while backing up,■ Correct use of the Parking Supportand when the brake pedal is notBrake function (pedestrians rear ofthe vehicle)depressed or is depressed late.P.333■ The Parking Support Brake function(pedestrians rear of the vehicle) willoperate whenThe function will operate when the drivingassist information indicator is not illumi-nated (P.92) and all of the following con-ditions are met:● Hybrid system output restriction control• The Parking Support Brake is display of pedestrians• The vehicle speed is 15 km/h (9 mph) of the vehicle• The shift position is in R.• When a pedestrian is to the rear of theDisplays a message to prompt thevehicle
346
4-5. Using the driving support systems
driver to brake when a pedestrian is
Parking Support Brake
detected in the detection area behind
function (pedestrians rear of
the vehicle.
the vehicle) *
*
: If equipped
If the rear camera sensor detects a
pedestrian behind the vehicle while
backing up and the system deter-
mines that the possibility of collid-
ing with the detected pedestrian is
high, a buzzer will sound. If the sys-
tem determines that the possibility
A Pedestrian detection icon
of colliding with the detected
B Example: “BRAKE!”
pedestrian is extremely high, the
brakes will be applied automati-
WARNING
cally to help reduce the impact of
■ If the Parking Support Brake function
the collision.
(pedestrians rear of the vehicle)
operates unnecessarily
Depress the brake pedal immediately
Examples of system operation
after the Parking Support Brake function
(pedestrians rear of the vehicle) oper-
The system operates when an
ates. (Operation of the function is can-
approaching pedestrian is detected
celed by depressing the brake pedal.)
behind the vehicle while backing up,
■ Correct use of the Parking Support
and when the brake pedal is not
Brake function (pedestrians rear of
the vehicle)
depressed or is depressed late.
P.333
■ The Parking Support Brake function
(pedestrians rear of the vehicle) will
operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.92) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
Screen display of pedestrians
• The vehicle speed is 15 km/h (9 mph) or
less.
rear of the vehicle
• The shift position is in R.
• When a pedestrian is to the rear of the
Displays a message to prompt the
vehicle
4-5. Using the driving support systems347• The PKSB (Parking Support Brake)■ Situations in which the system maydetermines that a stronger-than-normal-operate unexpectedlybrake operation is necessary to avoid aP.335collision.● Brake control• Hybrid system output restriction controlis operating.• The Parking Support Brake determinesthat an emergency brake operation isnecessary to avoid a collision with apedestrian.■ The Parking Support Brake function(pedestrians rear of the vehicle) willstop operating whenThe function will stop operating if any of thefollowing conditions are met:● Hybrid system output restriction control• The Parking Support Brake is disabled.• The collision becomes avoidable with4normal brake operation.• The pedestrian is no longer detectedbehind your ● Brake control• The Parking Support Brake is disabled.• Approximately 2 seconds have elapsedsince the vehicle was stopped by brakecontrol.• The brake pedal is depressed after thevehicle is stopped by brake control.■ Re-enabling the Parking Support Brakefunction (pedestrians rear of the vehi-cle)P.340■ Detection area of the Parking SupportBrake function (pedestrians rear of thevehicle)The detection area of the Parking SupportBrake function (pedestrians rear of thevehicle) differs from the detection area ofthe RCD function (P.334). Therefore,even if the RCD function detects a pedes-trian and provides an alert, the Parking Sup-port Brake function (pedestrians rear of thevehicle) may not start operating.■ Situations in which the system may notoperate properlyP.335
4-5. Using the driving support systems
347
• The PKSB (Parking Support Brake)
■ Situations in which the system may
determines that a stronger-than-normal-
operate unexpectedly
brake operation is necessary to avoid a
P.335
collision.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an emergency brake operation is
necessary to avoid a collision with a
pedestrian.
■ The Parking Support Brake function
(pedestrians rear of the vehicle) will
stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The collision becomes avoidable with
4
normal brake operation.
• The pedestrian is no longer detected
behind your vehicle.
Driving
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
■ Re-enabling the Parking Support Brake
function (pedestrians rear of the vehi-
cle)
P.340
■ Detection area of the Parking Support
Brake function (pedestrians rear of the
vehicle)
The detection area of the Parking Support
Brake function (pedestrians rear of the
vehicle) differs from the detection area of
the RCD function (P.334). Therefore,
even if the RCD function detects a pedes-
trian and provides an alert, the Parking Sup-
port Brake function (pedestrians rear of the
vehicle) may not start operating.
■ Situations in which the system may not
operate properly
P.335
3484-5. Using the driving support systemstor refer to “MULTIMEDIA OWNER’SLexus Teammate AdvancedMANUAL”.Park *■ Remote control function (ifequipped)*: If equippedRemote control function is a systemwhich assists in parking or exiting fromFunction descriptiona parking space selected on the Cen-The Advanced Park is a system whichter Display by allowing changing theassists in a safe and smooth parking orshift position, operating the steeringexiting from a parking space by dis-wheel, accelerator pedal, and brakeplaying the blind spots around the vehi-pedal from outside of the vehicle via acle and the target parking spot throughsmartphone.a bird’s eye view, delivering operationThe turn signal lights will blink automat-guidance through displays and buzzerically when the parking assistance,operation, and changing the shift posi-except that for moving the vehicle for-tion, operating the steering wheel,ward and backward, starts until theaccelerator pedal, and brake reaches the target parkingAdditionally, the panoramic view mon-spot, to notify people around the vehi-itor * can display the area in front,cle that parking is being , and from above the vehicle,Preparation before using: P.376helping confirm the condition of thearea around the turn signal lights will blink automat-■ Perpendicular parking (for-ically when the parking assistanceward/reverse) functionstarts until the vehicle reaches the tar-get parking spot, to notify peopleAssistance is provided from the posi-around the vehicle that parking istion the vehicle is stopped near the tar-being parking space until the vehicle is inthe parking space. (P.359)Depending on the condition of theroad surface or the vehicle, the dis-■ Perpendicular exiting (for-tance between the vehicle and a park-ward/reverse) functioning space, etc., it may not be possible toAssistance is provided from the parkedassist in parking in the target until the vehicle is i
348
4-5. Using the driving support systems
tor refer to “MULTIMEDIA OWNER’S
Lexus Teammate Advanced
MANUAL”.
Park *
■ Remote control function (if
equipped)
*
: If equipped
Remote control function is a system
which assists in parking or exiting from
Function description
a parking space selected on the Cen-
The Advanced Park is a system which
ter Display by allowing changing the
assists in a safe and smooth parking or
shift position, operating the steering
exiting from a parking space by dis-
wheel, accelerator pedal, and brake
playing the blind spots around the vehi-
pedal from outside of the vehicle via a
cle and the target parking spot through
smartphone.
a bird’s eye view, delivering operation
The turn signal lights will blink automat-
guidance through displays and buzzer
ically when the parking assistance,
operation, and changing the shift posi-
except that for moving the vehicle for-
tion, operating the steering wheel,
ward and backward, starts until the
accelerator pedal, and brake pedal.
vehicle reaches the target parking
Additionally, the panoramic view mon-
spot, to notify people around the vehi-
itor * can display the area in front,
cle that parking is being performed.
behind, and from above the vehicle,
Preparation before using: P.376
helping confirm the condition of the
area around the vehicle.
Functions
The turn signal lights will blink automat-
■ Perpendicular parking (for-
ically when the parking assistance
ward/reverse) function
starts until the vehicle reaches the tar-
get parking spot, to notify people
Assistance is provided from the posi-
around the vehicle that parking is
tion the vehicle is stopped near the tar-
being performed.
get parking space until the vehicle is in
the parking space. (P.359)
Depending on the condition of the
road surface or the vehicle, the dis-
■ Perpendicular exiting (for-
tance between the vehicle and a park-
ward/reverse) function
ing space, etc., it may not be possible to
Assistance is provided from the parked
assist in parking in the target space.
position until the vehicle is in a position
Only use Advanced Park in accor-
where you can easily exit from the
dance with all local road traffic laws
parking space. (P.362)
and regulations.
■ Parallel parking function
*
: For details on the panoramic view moni-
Assistance is provided from the posi-
4-5. Using the driving support systems349tion the vehicle is stopped near the tar-● As with a normal vehicle, take care toget parking space until the vehicle is inobserve your surroundings while thevehicle is parking space. (P.363)● Always pay attention to the vehicle’s■ Parallel exiting functionsurroundings while the system is oper-Assistance is provided from the parkedating and depress the brake pedal asnecessary to slow or stop the until the vehicle is in a positionIf Remote control function is in opera-where you can easily exit from thetion, stop operating the dedicatedparking space. (P.366)smartphone app for Remote controlfunction (hereafter, dedicated app)■ Memory functionand stop the is provided until the vehicle● When parking, make sure that thevehicle can be parked in the targetis guided into a previously registeredparking space before beginning oper-parking space. (P.368)ation.■ Remote control function (if● Depending on the condition of theequipped)road surface or the vehicle, the dis-4tance between the vehicle and a park-By operating a smartphone, assistanceing space, etc., it may not be possiblein parking or exiting from a nearby tar-to detect a parking space or the sys-Drivingtem may not be able to provide assis-get parking space, confirmed on thetance to the point the vehicle is fullyscreen of the smartphone, is outside of the vehicle. (P.373)● This system will guide the vehicle toappropriate positions for changing the■ Trademarksdirection of travel, however, if you feelthat the vehicle is approaching tooThe Bluetooth ® word mark and logos areclose to an adjacent parked vehicle atregistered trademarks owned by Bluetoothany time, depress the brake pedal andSIG, Inc. and any use of such marks bychange the shift position. However, ifToyota Motor Corporation is under is performed, the number of timesOther trademarks and trade names arethe vehicle changes direction maythose
4-5. Using the driving support systems
349
tion the vehicle is stopped near the tar-
● As with a normal vehicle, take care to
get parking space until the vehicle is in
observe your surroundings while the
vehicle is moving.
the parking space. (P.363)
● Always pay attention to the vehicle’s
■ Parallel exiting function
surroundings while the system is oper-
Assistance is provided from the parked
ating and depress the brake pedal as
necessary to slow or stop the vehicle.
position until the vehicle is in a position
If Remote control function is in opera-
where you can easily exit from the
tion, stop operating the dedicated
parking space. (P.366)
smartphone app for Remote control
function (hereafter, dedicated app)
■ Memory function
and stop the vehicle.
Assistance is provided until the vehicle
● When parking, make sure that the
vehicle can be parked in the target
is guided into a previously registered
parking space before beginning oper-
parking space. (P.368)
ation.
■ Remote control function (if
● Depending on the condition of the
equipped)
road surface or the vehicle, the dis-
4
tance between the vehicle and a park-
By operating a smartphone, assistance
ing space, etc., it may not be possible
in parking or exiting from a nearby tar-
to detect a parking space or the sys-
Driving
tem may not be able to provide assis-
get parking space, confirmed on the
tance to the point the vehicle is fully
screen of the smartphone, is provided
parked.
from outside of the vehicle. (P.373)
● This system will guide the vehicle to
appropriate positions for changing the
■ Trademarks
direction of travel, however, if you feel
that the vehicle is approaching too
The Bluetooth ® word mark and logos are
close to an adjacent parked vehicle at
registered trademarks owned by Bluetooth
any time, depress the brake pedal and
SIG, Inc. and any use of such marks by
change the shift position. However, if
Toyota Motor Corporation is under license.
this is performed, the number of times
Other trademarks and trade names are
the vehicle changes direction may
those of their respective owners.
increase, and the vehicle may be
parked at an angle.
WARNING
● As certain objects or materials, such as
■ Cautions regarding the use of
the following, may not be detected,
Advanced Park, including Remote
make sure to check the safety of the
control function (if equipped)
area around your vehicle and depress
the brake pedal to stop the vehicle if it
The recognition and control capabilities
may collide with an object.
for this system are limited. The driver
If Remote control function is in opera-
should always drive safely by always
tion, stop operating the dedicated app
being responsible without over relying
and stop the vehicle.
on the system and have an understand-
ing of the surrounding situations.
3504-5. Using the driving support systems● When the ambient temperature isWARNINGextremely low, the screen may appear• Thin objects (wires, fences, ropes,dark or the displayed image maypoles, etc.) or objects that appear likebecome unclear. Also, as movingthin from a certain angle of approachobjects may appear distorted or may(signs, bicycles, etc.)not be able to be seen on the screen,make sure to directly check the safety• Materials that absorb sound wavesof the area around your vehicle.(cotton, snow, etc.)● In the following situations, while the• Sharp-edged objects (block walls/col-vehicle is stopped and held byumns, wall corners, etc.)Advanced Park, it may be canceledand the vehicle may start moving.• Objects in lower places (curbImmediately depress the brake stairs, parking blocks,Failure to do so may lead to an acci-etc.) Remote control function is in opera-• Tall objects with upper sections thattion, stop operating the dedicated appprotrude outward (beams, etc.)and stop the vehicle.• Objects which are not perpendicular• When the driver’s door is openedto the ground• When operations instructed by the• Objects to which the vehicle issystem are not performed within a cer-approaching diagonallytain amount of time● Even if there is an object in the target• When the brake pedal is depressedparking space, it may not be detectedand the vehicle is stopped for a certainand assistance may be of time● If it is likely that your vehicle will collide• When the system malfunctionswith a nearby vehicle, object, or per-son, or go over the top of a parking● As the steering wheel will turn whileblock, depress the brake pedal to stopthis system is operating, pay attentionthe vehicle and press the Advancedto the main switch to disable the Remote control function is in opera-• Be careful so that a necktie, scarf, ortion, stop operating the dedicated apparm does not get caught. Keep yourand stop the
350
4-5. Using the driving support systems
● When the ambient temperature is
WARNING
extremely low, the screen may appear
• Thin objects (wires, fences, ropes,
dark or the displayed image may
poles, etc.) or objects that appear like
become unclear. Also, as moving
thin from a certain angle of approach
objects may appear distorted or may
(signs, bicycles, etc.)
not be able to be seen on the screen,
make sure to directly check the safety
• Materials that absorb sound waves
of the area around your vehicle.
(cotton, snow, etc.)
● In the following situations, while the
• Sharp-edged objects (block walls/col-
vehicle is stopped and held by
umns, wall corners, etc.)
Advanced Park, it may be canceled
and the vehicle may start moving.
• Objects in lower places (curb
Immediately depress the brake pedal.
stones/blocks, stairs, parking blocks,
Failure to do so may lead to an acci-
etc.)
dent.
If Remote control function is in opera-
• Tall objects with upper sections that
tion, stop operating the dedicated app
protrude outward (beams, etc.)
and stop the vehicle.
• Objects which are not perpendicular
• When the driver’s door is opened
to the ground
• When operations instructed by the
• Objects to which the vehicle is
system are not performed within a cer-
approaching diagonally
tain amount of time
● Even if there is an object in the target
• When the brake pedal is depressed
parking space, it may not be detected
and the vehicle is stopped for a certain
and assistance may be performed.
amount of time
● If it is likely that your vehicle will collide
• When the system malfunctions
with a nearby vehicle, object, or per-
son, or go over the top of a parking
● As the steering wheel will turn while
block, depress the brake pedal to stop
this system is operating, pay attention
the vehicle and press the Advanced
to the following.
Park main switch to disable the system.
If Remote control function is in opera-
• Be careful so that a necktie, scarf, or
tion, stop operating the dedicated app
arm does not get caught. Keep your
and stop the vehicle.
upper body away from the steering
wheel. Also, keep children away from
● Never use only the Center Display to
the steering wheel.
view the area behind the vehicle. The
image displayed may differ than the
• Long fingernails may be caught and
actual situation. Using only the screen
when the steering wheel is rotating,
when backing up may lead to an acci-
leading to injury.
dent, such as a collision with another
• In an emergency, depress the brake
vehicle. When backing up, make sure
pedal to stop the vehicle, and then
to look directly or use the mirrors to
press the Advanced Park main switch
check the safety of the area around
to disable the system.
your vehicle, especially behind the
If Remote control function is in opera-
vehicle.
tion, stop operating the dedicated app
and stop the vehicle.
4-5. Using the driving support systems351• When images are unclear due to dirtWARNINGor snow attached to the camera lens,● Do not allow anyone to put their handslight being shined into the camera oroutside of a window while this systemshadowsis operating.• When tire chains or a compact spare■ To ensure correct operation of thetire is installed to the vehicleAdvanced Park• When the doors or back door are notObserve the following precautions. Fail-completely closeding to do so may result in the vehiclebeing unable to be driven safely and pos-• When an arm is held outside of a win-sibly cause an ● Do not use this system in situations• In inclement weather such as heavysuch as the following:rain or snow• When in areas other than common● Make sure to use only standard sizedparking spacestires, such as those that were installedto the vehicle when it was shipped• When the surface of the parking spacefrom the factory. Otherwise,is sand or gravel and is not clearlyAdvanced Park may not operate4defined with parking space linesproperly. Also, when the tires havebeen replaced, the displayed position• When the parking space is not level,Drivingof the lines or box displayed on thesuch as on a slope, or having differ-screen may become incorrect. Whenences in height, holes, or guttersreplacing the tires, contact any autho-• Mechanical parking systemrized Lexus retailer or Lexus autho-rized repairer, or any reliable repairer.• Parking lot with a device which raisesto contact the bottom of the vehicle● In situations such as the following, itmay not be possible for the system to• When the road surface is frozen, slick,provide assistance to a registeredor covered with snowparking spot or to operate correctly:• When it is extremely hot and the• When the tires are extremely worn orasphalt is meltingthe tire inflation pressure is low• When there are objects around the• When carrying a heavy loadvehicle• When the vehicle is tilted due to the• When there is an object between you
4-5. Using the driving support systems
351
• When images are unclear due to dirt
WARNING
or snow attached to the camera lens,
● Do not allow anyone to put their hands
light being shined into the camera or
outside of a window while this system
shadows
is operating.
• When tire chains or a compact spare
■ To ensure correct operation of the
tire is installed to the vehicle
Advanced Park
• When the doors or back door are not
Observe the following precautions. Fail-
completely closed
ing to do so may result in the vehicle
being unable to be driven safely and pos-
• When an arm is held outside of a win-
sibly cause an accident.
dow
● Do not use this system in situations
• In inclement weather such as heavy
such as the following:
rain or snow
• When in areas other than common
● Make sure to use only standard sized
parking spaces
tires, such as those that were installed
to the vehicle when it was shipped
• When the surface of the parking space
from the factory. Otherwise,
is sand or gravel and is not clearly
Advanced Park may not operate
4
defined with parking space lines
properly. Also, when the tires have
been replaced, the displayed position
• When the parking space is not level,
Driving
of the lines or box displayed on the
such as on a slope, or having differ-
screen may become incorrect. When
ences in height, holes, or gutters
replacing the tires, contact any autho-
• Mechanical parking system
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
• Parking lot with a device which raises
to contact the bottom of the vehicle
● In situations such as the following, it
may not be possible for the system to
• When the road surface is frozen, slick,
provide assistance to a registered
or covered with snow
parking spot or to operate correctly:
• When it is extremely hot and the
• When the tires are extremely worn or
asphalt is melting
the tire inflation pressure is low
• When there are objects around the
• When carrying a heavy load
vehicle
• When the vehicle is tilted due to the
• When there is an object between your
carried load
vehicle and the target parking spot or
within the target parking spot (within
• When a heater is installed in the sur-
the displayed blue box)
face of the parking space (road sur-
face freeze prevention heater)
• When in high pedestrian or vehicle
traffic areas
• When the wheels are misaligned, such
after a wheel has been subjected to a
• When the parking space is in a loca-
strong impact
tion that is difficult to park in (too nar-
row for your vehicle, etc.)
• When a pedestrian or passing vehicle
is detected during assistance
3524-5. Using the driving support systems● Remote control function is a systemWARNINGwhich assists in remote parking or exit-• When a device, such as a towing hook,ing operations using a protector, bumper trim, bicy-When using Remote control function,cle carrier, snow plow, etc., is installedthe driver must carry the electronickey and smartphone and confirm the• When something is incorrectlysafety of the area around the as a parking line (light, reflec-tions from a building, difference in● While using Remote control function,height on the parking surface, a gutter,the vehicle can be stopped by stoppainted road lines, redrawn lines, etc.)operating the smartphone. The vehiclecan also be stopped by executing theIf the vehicle deviates greatly from thestop operation of the dedicated app,set parking space in any situation otherunlocking the doors using the elec-than the above, have the vehicletronic key, or opening a by any authorized Lexusretailer or Lexus authorized repairer, or● If it seems like your vehicle may con-any reliable an obstruction, etc., stop operat-ing the smartphone and cancel■ When using Remote control functionRemote control function if necessary.(if equipped)● Regardless of the manner of smart-● Remote control function is a functionphone operation, system operation willof the Advanced Park system. Whenonly be performed at a fixed Remote control function on pub-lic roads, be sure to follow all local● Never drive the vehicle while staringroad traffic laws and the smartphone screen.● Remote control function can only be● When driving, make sure to directlyused after agreeing to the disclaimercheck the safety of the area aroundof the dedicated vehicle.● Remote control function can only per-● Do not use Remote control functionform some driving operations. Itwhen passengers or pets are in theshould only be operated by a a valid driving licen
352
4-5. Using the driving support systems
● Remote control function is a system
WARNING
which assists in remote parking or exit-
• When a device, such as a towing hook,
ing operations using a smartphone.
bumper protector, bumper trim, bicy-
When using Remote control function,
cle carrier, snow plow, etc., is installed
the driver must carry the electronic
key and smartphone and confirm the
• When something is incorrectly
safety of the area around the vehicle.
detected as a parking line (light, reflec-
tions from a building, difference in
● While using Remote control function,
height on the parking surface, a gutter,
the vehicle can be stopped by stop
painted road lines, redrawn lines, etc.)
operating the smartphone. The vehicle
can also be stopped by executing the
If the vehicle deviates greatly from the
stop operation of the dedicated app,
set parking space in any situation other
unlocking the doors using the elec-
than the above, have the vehicle
tronic key, or opening a door.
inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
● If it seems like your vehicle may con-
any reliable repairer.
tact an obstruction, etc., stop operat-
ing the smartphone and cancel
■ When using Remote control function
Remote control function if necessary.
(if equipped)
● Regardless of the manner of smart-
● Remote control function is a function
phone operation, system operation will
of the Advanced Park system. When
only be performed at a fixed speed.
using Remote control function on pub-
lic roads, be sure to follow all local
● Never drive the vehicle while staring
road traffic laws and regulations.
at the smartphone screen.
● Remote control function can only be
● When driving, make sure to directly
used after agreeing to the disclaimer
check the safety of the area around
of the dedicated app.
your vehicle.
● Remote control function can only per-
● Do not use Remote control function
form some driving operations. It
when passengers or pets are in the
should only be operated by a driver
vehicle.
with a valid driving license. While using
the dedicated app, carry electronic
● In an emergency, the system can be
key. While operating, do not stare at
canceled by operating a switch on the
the dedicated app screen, and pay
electronic key or by opening a door.
attention to the vehicle’s surroundings.
In an emergency, cancel the Remote
● To use Remote control function, it is
control function operation and stop
necessary to have a smartphone and
the vehicle.
the most up-to-date dedicated app.
● As with a normal vehicle, take care to
Download the dedicated app from the
observe the area around the vehicle
app store.
while the vehicle is moving.
● When registering the vehicle to the
● Always pay attention to the vehicle’s
dedicated app, disconnect any other
surroundings while the system is oper-
apps which are connected to the vehi-
ating.
cle.
● Make sure that the hood is closed
before operating the system.
4-5. Using the driving support systems353● When Remote control function isWARNINGoperating, the driver should remain● To enable Remote control function,within approximately 3 m (9.8 ft.) ofmake sure to disable the Applethe vehicle. If the driver becomesCarPlay /Android Auto™ than approximately 3 m (9.8 ft.)away, Remote control function will beApple CarPlay is a trademark of Applesuspended and a message will be dis-Inc., registered in the U.S. and otherplayed on the smartphone. function operation can beAndroid Auto™ is a trademark ofresumed by approaching the LLC.● The headlights will be turned on if the● When parking, make sure that thesurrounding area is can be parked in the target● If system operation is canceled due toparking space before beginning oper-a malfunction, the emergency flash.● Only use Remote control function onThe emergency flashers will turn off iflevel road surfaces which are not of the following conditions areDo not use Remote control functionmet:for parking spaces on a downward or• A door is opened4upward slope.• 3 minutes have elapsed since the● While Remote control function isemergency flashers began flashingDrivingoperating, if a malfunction or systemlimitation is detected, the following will● Remote control function can only beoccur automatically:started when the following conditionsare met:• Remote control function will be can-celed• When the hybrid system is starting,after assist mode is selected• The vehicle will stop• When the power switch is off• The shift position will change to P andthe parking brake will be engagedNOTICE• The power switch will turn off (forsome malfunctions, the power switch■ Precautions for use Advanced Parkwill not turn off or cannot be turned the 12-volt battery was discharged orEnter the vehicle and take correctivehas been removed and installed, fold andaction according to the message dis-extend the outside rea
4-5. Using the driving support systems
353
● When Remote control function is
WARNING
operating, the driver should remain
● To enable Remote control function,
within approximately 3 m (9.8 ft.) of
make sure to disable the Apple
the vehicle. If the driver becomes
CarPlay /Android Auto™ connection.
more than approximately 3 m (9.8 ft.)
away, Remote control function will be
Apple CarPlay is a trademark of Apple
suspended and a message will be dis-
Inc., registered in the U.S. and other
played on the smartphone. Remote
countries.
control function operation can be
Android Auto™ is a trademark of
resumed by approaching the vehicle.
Google LLC.
● The headlights will be turned on if the
● When parking, make sure that the
surrounding area is dark.
vehicle can be parked in the target
● If system operation is canceled due to
parking space before beginning oper-
a malfunction, the emergency flashers
ation.
will flash.
● Only use Remote control function on
The emergency flashers will turn off if
level road surfaces which are not slick.
any of the following conditions are
Do not use Remote control function
met:
for parking spaces on a downward or
• A door is opened
4
upward slope.
• 3 minutes have elapsed since the
● While Remote control function is
emergency flashers began flashing
Driving
operating, if a malfunction or system
limitation is detected, the following will
● Remote control function can only be
occur automatically:
started when the following conditions
are met:
• Remote control function will be can-
celed
• When the hybrid system is starting,
after assist mode is selected
• The vehicle will stop
• When the power switch is off
• The shift position will change to P and
the parking brake will be engaged
NOTICE
• The power switch will turn off (for
some malfunctions, the power switch
■ Precautions for use Advanced Park
will not turn off or cannot be turned off.
If the 12-volt battery was discharged or
Enter the vehicle and take corrective
has been removed and installed, fold and
action according to the message dis-
extend the outside rear view mirrors.
played on the smartphone.)
• The doors will remain locked
● When starting Remote control func-
tion, unlock the doors with wireless
remote control by electronic key.
3544-5. Using the driving support systems● Do not force close the dedicated appNOTICEwhile Remote control function is being■ When using Remote control functionused. If the app is force closed, assist(if equipped)will be canceled.● Check the battery charge level of the● When the ambient temperature is low,smartphone before using Remoteit may take time for the system to start,control function. If the battery of thedue to 12-volt battery dies while operatingRemote control function, assist will be● If the 12-volt battery voltage drops,suspended. Also, if the battery chargeassistance will be of the smartphone is 20% or lesswhen attempting to start Remote con-● When using Remote control functiontrol function, Remote control functionon a slope, the vehicle speed will bewill not be and the distance that the vehi-cle will approach objects will become● Enable Bluetooth ® of the smartphonelonger than when on a level road sur-before using Remote control control function cannot be● If a system temporary failure occurs,used when Bluetooth ® connection isafter the vehicle is stopped by parking brake or the shiftposition being changed to P, the● Do not disable the Bluetooth ® of thepower switch may turn off and the sys-smartphone or disconnect from thetem may be canceled. In this case,multimedia system while using Remotehave the vehicle inspected by anycontrol function. If the vehicle cannotauthorized Lexus retailer or Lexusbe connected to via Bluetooth ® ,authorized repairer, or any reliableRemote control function cannot .● If a system malfunction occurs, assis-● While using Remote control function,tance may be temporarily a call is received, etc., and anotherIf the system returns to normal, opera-app is opened, Remote control func-tion can be resumed. Follow the con-tion will be suspended. Assist can betent on the smartphone screen toresumed if the dedicated a
354
4-5. Using the driving support systems
● Do not force close the dedicated app
NOTICE
while Remote control function is being
■ When using Remote control function
used. If the app is force closed, assist
(if equipped)
will be canceled.
● Check the battery charge level of the
● When the ambient temperature is low,
smartphone before using Remote
it may take time for the system to start,
control function. If the battery of the
due to 12-volt battery charging.
smartphone dies while operating
Remote control function, assist will be
● If the 12-volt battery voltage drops,
suspended. Also, if the battery charge
assistance will be canceled.
level of the smartphone is 20% or less
when attempting to start Remote con-
● When using Remote control function
trol function, Remote control function
on a slope, the vehicle speed will be
will not be started.
slower and the distance that the vehi-
cle will approach objects will become
● Enable Bluetooth ® of the smartphone
longer than when on a level road sur-
before using Remote control function.
face.
Remote control function cannot be
● If a system temporary failure occurs,
used when Bluetooth ® connection is
after the vehicle is stopped by the
disabled.
electronic parking brake or the shift
position being changed to P, the
● Do not disable the Bluetooth ® of the
power switch may turn off and the sys-
smartphone or disconnect from the
tem may be canceled. In this case,
multimedia system while using Remote
have the vehicle inspected by any
control function. If the vehicle cannot
authorized Lexus retailer or Lexus
be connected to via Bluetooth ® ,
authorized repairer, or any reliable
Remote control function cannot be
repairer.
used.
● If a system malfunction occurs, assis-
● While using Remote control function,
tance may be temporarily suspended.
if a call is received, etc., and another
If the system returns to normal, opera-
app is opened, Remote control func-
tion can be resumed. Follow the con-
tion will be suspended. Assist can be
tent on the smartphone screen to
resumed if the dedicated app is
resume operation.
reopened within 3 minutes. If 3 min-
utes or more elapse, assist will be can-
● If the hybrid system has been started
celed.
using a remote start, the remote con-
trol function may not operate properly.
● While using Remote control function,
if the home button or power button of
● After Remote control function com-
the smartphone is pressed and the
pletes, the parking brake will be
screen is locked, Remote control func-
engaged as per regulations. As the
tion will be suspended. Assist can be
parking brake may freeze and not be
resumed if the dedicated app is
able to be released, avoid using
reopened within 3 minutes. If 3 min-
Remote control function in extremely
utes or more elapse, assist will be can-
cold areas. Also, if the parking brake
celed.
freezes, it may make a noise when it is
released. However, this does not indi-
cate a malfunction.
4-5. Using the driving support systems355 Rear cameraNOTICE● Do not use Remote control functionwhen the electronic key battery of cameras and sensorsused for the Advanced ParkCameras and sensors are used todetect parked vehicles, making it eas- Sensorsier to identify parking spaces.P.319 Front camera■ Camera imagesAs special cameras are used, the colors indisplayed images may differ from the actual4color.■ Precautions for useDrivingFor details on the following, refer to “Pan-oramic view monitor” in the “MULTIME-DIA OWNER’S MANUAL”.● Displayable range of the screens Side cameras● Cameras● Differences between displayed imagesand the actual road● Differences between displayed imagesand the actual objects■ Detection range of the cameras andsensors● If a parked vehicle is behind the targetparking space and the distance betweenit and the vehicle becomes far, it may nolonger be able to be detected. Depend-ing on shape or condition of a parkedvehicle, the detection range may becomeshort or the vehicle may not be detected.● Objects other than parked vehicles, suchas columns, walls, etc., may not bedetected. Also, if they are detected, theymay cause the target parking space to bemisaligned.
4-5. Using the driving support systems
355
 Rear camera
NOTICE
● Do not use Remote control function
when the electronic key battery is
depleted.
Types of cameras and sensors
used for the Advanced Park
Cameras and sensors are used to
detect parked vehicles, making it eas-
 Sensors
ier to identify parking spaces.
P.319
 Front camera
■ Camera images
As special cameras are used, the colors in
displayed images may differ from the actual
4
color.
■ Precautions for use
Driving
For details on the following, refer to “Pan-
oramic view monitor” in the “MULTIME-
DIA OWNER’S MANUAL”.
● Displayable range of the screens
 Side cameras
● Cameras
● Differences between displayed images
and the actual road
● Differences between displayed images
and the actual objects
■ Detection range of the cameras and
sensors
● If a parked vehicle is behind the target
parking space and the distance between
it and the vehicle becomes far, it may no
longer be able to be detected. Depend-
ing on shape or condition of a parked
vehicle, the detection range may become
short or the vehicle may not be detected.
● Objects other than parked vehicles, such
as columns, walls, etc., may not be
detected. Also, if they are detected, they
may cause the target parking space to be
misaligned.
3564-5. Using the driving support systems■ Situations in which parking space linesor backlitmay not be recognized properly• When the color or brightness of the roadsurface is uneven● In situations such as the following, park-• When the parking space is on a slopeing space lines on the road surface may• When there are diagonal lines (accessnot be detected:aisle) near the parking space• When the parking space does not use• When the appearance of the parkinglines (parking space boundaries arespace is affected by the shadow of amarked with rope, blocks, etc.)parked vehicle (such as shadows from• When the parking space lines are fadedthe grille, side step, etc.)or dirty, making them unclear• When accessories which obstruct the• When the road surface is bright, such asview of the camera are installedconcrete, and the contrast between it and• When the parking space lines are fadedthe white parking space lines is smallor dirty, making them unclear• When the parking space lines are any• When the appearance of the parkingcolor other than yellow or whitespace is affected by the shadow of the• When the area surrounding the parkingvehicle or treesspace is dark, such as at night, in anunderground parking lot, parking■ Sensor detection informationgarage, etc.P.321• When it is raining or has rained and theroad surface is wet and reflective or there■ Objects which the sensor may not beare puddlesproperly detected• When the sun is shining directly into aP.322camera, such as in the early morning or■ Situations in which the sensor may noteveningoperate properly• When the parking space is covered withsnow or de-icing agentP.322• When there marks from repairs or other■ Situations in which parking assistancemarks on the road surface, or there is amay not operate even if there is no pos-traffic bollard, or other object on the roadsibility of a collisionsurface• When the color or brightness of the roadP.322surface is uneven• When a camera has been splashed byWARNINGhot or cold water and
356
4-5. Using the driving support systems
■ Situations in which parking space lines
or backlit
may not be recognized properly
• When the color or brightness of the road
surface is uneven
● In situations such as the following, park-
• When the parking space is on a slope
ing space lines on the road surface may
• When there are diagonal lines (access
not be detected:
aisle) near the parking space
• When the parking space does not use
• When the appearance of the parking
lines (parking space boundaries are
space is affected by the shadow of a
marked with rope, blocks, etc.)
parked vehicle (such as shadows from
• When the parking space lines are faded
the grille, side step, etc.)
or dirty, making them unclear
• When accessories which obstruct the
• When the road surface is bright, such as
view of the camera are installed
concrete, and the contrast between it and
• When the parking space lines are faded
the white parking space lines is small
or dirty, making them unclear
• When the parking space lines are any
• When the appearance of the parking
color other than yellow or white
space is affected by the shadow of the
• When the area surrounding the parking
vehicle or trees
space is dark, such as at night, in an
underground parking lot, parking
■ Sensor detection information
garage, etc.
P.321
• When it is raining or has rained and the
road surface is wet and reflective or there
■ Objects which the sensor may not be
are puddles
properly detected
• When the sun is shining directly into a
P.322
camera, such as in the early morning or
■ Situations in which the sensor may not
evening
operate properly
• When the parking space is covered with
snow or de-icing agent
P.322
• When there marks from repairs or other
■ Situations in which parking assistance
marks on the road surface, or there is a
may not operate even if there is no pos-
traffic bollard, or other object on the road
sibility of a collision
surface
• When the color or brightness of the road
P.322
surface is uneven
• When a camera has been splashed by
WARNING
hot or cold water and the lens has fogged
up
■ Precautions for the cameras and sen-
• When the appearance of the parking
sors
space is affected by the shadow of the
● Due to the characteristics of the cam-
vehicle or trees
era lens, the position of and distance to
• When a camera lens is dirty or covered
people and objects displayed on the
with water droplets
screen may differ from the actual situa-
● In situations such as the following, the tar-
tion. For details, refer to “MULTIME-
get parking space may not be recog-
DIA OWNER’S MANUAL”.
nized correctly:
• When there marks from repairs or other
● Make sure to observe the precautions
marks on the road surface, or there is a
for using the Lexus parking assist-sen-
parking block, traffic bollard, or other
sor, otherwise a sensor may not oper-
object on the road surface
ate correctly, possibly leading to an
• When it is raining or has rained and the
accident. (P.320)
road surface is wet and reflective or there
are puddles
• When the area around the vehicle is dark
4-5. Using the driving support systems357● The accelerator pedal is not depressedWARNING● All of the doors and the back door are● In situations such as the following, theclosedsensors may not operate correctly,● The outside rear view mirrors are notpossibly leading to an accident. Pro-foldedceed carefully.● The parking brake is not engaged• When there is a parked vehicle next to● The dynamic radar cruise control are notthe target parking space, if the dis-operatingplayed target parking space is far fromthe actual target parking space, a sen-● ABS, VSC, TRC, PCS and PKSB are notsor may be misaligned. Have the vehi-operatingcle inspected by any authorized Lexus● The vehicle is not towing a trailer orretailer or Lexus authorized repairer,another vehicleor any reliable repairer.● The vehicle is not on a steep slope• Do not install any accessories near the● The VSC and TRC are not turned offdetection area of the assistance cannot be started, check themessage displayed on the Center Display.(P.382)Turning the Advanced Park sys-4tem on/offAdvanced Park guidanceDrivingPress the Advanced Park main the switch is pressed while assistance isGuidance screens are displayed onbeing performed, the assistance will bethe Center . Guidance screen (When assis-tance starts)■ Operating conditions of the AdvancedParkA Target parking space box (blue)Assistance will begin when all of the follow-ing conditions are met:B Advice display● The brake pedal is depressedC Parking type change button● The vehicle is stopped● The driver’s seat belt is fastenedIf multiple buttons are displayed, depend-ing on the condition of the button its func-● The steering wheel is not being operatedtion differs as follows.
4-5. Using the driving support systems
357
● The accelerator pedal is not depressed
WARNING
● All of the doors and the back door are
● In situations such as the following, the
closed
sensors may not operate correctly,
● The outside rear view mirrors are not
possibly leading to an accident. Pro-
folded
ceed carefully.
● The parking brake is not engaged
• When there is a parked vehicle next to
● The dynamic radar cruise control are not
the target parking space, if the dis-
operating
played target parking space is far from
the actual target parking space, a sen-
● ABS, VSC, TRC, PCS and PKSB are not
sor may be misaligned. Have the vehi-
operating
cle inspected by any authorized Lexus
● The vehicle is not towing a trailer or
retailer or Lexus authorized repairer,
another vehicle
or any reliable repairer.
● The vehicle is not on a steep slope
• Do not install any accessories near the
● The VSC and TRC are not turned off
detection area of the sensors.
If assistance cannot be started, check the
message displayed on the Center Display.
(P.382)
Turning the Advanced Park sys-
4
tem on/off
Advanced Park guidance
Driving
Press the Advanced Park main switch.
screens
If the switch is pressed while assistance is
Guidance screens are displayed on
being performed, the assistance will be
the Center Display.
canceled.
 Guidance screen (When assis-
tance starts)
■ Operating conditions of the Advanced
Park
A Target parking space box (blue)
Assistance will begin when all of the follow-
ing conditions are met:
B Advice display
● The brake pedal is depressed
C Parking type change button
● The vehicle is stopped
● The driver’s seat belt is fastened
If multiple buttons are displayed, depend-
ing on the condition of the button its func-
● The steering wheel is not being operated
tion differs as follows.
3584-5. Using the driving support systems Guidance screen (When reversing)or: Change the target to anotherparking : Select the current target park-ing space.: Select to change to the parallel park-ing function: Change the perpendicular parking(forward/reverse) functionD “MODE” buttonA Operation iconSelect to change between the memoryfunction and the perpendicular parkingDisplayed when the Advanced Park is(forward/reverse) function and function. (P.370)B Guide lines (yellow and red)E “Start” buttonDisplay points from the center of the edgeSelect to start parking the front or rear bumper to the targetstopping position (yellow) * and approxi-F Perpendicular parking directionmately 0.3 m (1 ft.) (red) from the buttonC Moving object warning iconSelect to change between the parking (for-ward) function and parking (reverse) func-D Emergency support brake controltionoperation display: Change the perpendicular parking“BRAKE!” is displayed.(forward) functionE Lexus parking assist-sensor display: Change the perpendicular parkingP.319(reverse) function*: The yellow lateral line is not displayedG Customize setting buttonwhen the target stopping position isSelect to display the Advanced Park set-approximately 2.5 m (8.2 ft.) or moreting screen. (P.380)away from the vehicle.H Registration button■ Lexus parking assist-sensor pop-up dis-Select to begin registering a of whether the Lexus parkingassist-sensor is off or on (P.320), if anI Remote control function start but-object is detected by the Lexus parkington *assist-sensor when the Advanced Park isoperating, the Lexus parking assist-sensorSelect to start parking assistance opera-pop up display will automatically be dis-tion on the smartphone over the guidance display.*: If equipped
358
4-5. Using the driving support systems
 Guidance screen (When reversing)
or
: Change the target to another
parking space.
or
: Select the current target park-
ing space.
: Select to change to the parallel park-
ing function
: Change the perpendicular parking
(forward/reverse) function
D “MODE” button
A Operation icon
Select to change between the memory
function and the perpendicular parking
Displayed when the Advanced Park is
(forward/reverse) function and parallel
operating.
parking function. (P.370)
B Guide lines (yellow and red)
E “Start” button
Display points from the center of the edge
Select to start parking assistance.
of the front or rear bumper to the target
stopping position (yellow) * and approxi-
F Perpendicular parking direction
mately 0.3 m (1 ft.) (red) from the vehicle.
change button
C Moving object warning icon
Select to change between the parking (for-
ward) function and parking (reverse) func-
D Emergency support brake control
tion
operation display
: Change the perpendicular parking
“BRAKE!” is displayed.
(forward) function
E Lexus parking assist-sensor display
: Change the perpendicular parking
P.319
(reverse) function
*
: The yellow lateral line is not displayed
G Customize setting button
when the target stopping position is
Select to display the Advanced Park set-
approximately 2.5 m (8.2 ft.) or more
ting screen. (P.380)
away from the vehicle.
H Registration button
■ Lexus parking assist-sensor pop-up dis-
Select to begin registering a parking
play
space.
Regardless of whether the Lexus parking
assist-sensor is off or on (P.320), if an
I Remote control function start but-
object is detected by the Lexus parking
ton *
assist-sensor when the Advanced Park is
operating, the Lexus parking assist-sensor
Select to start parking assistance opera-
pop up display will automatically be dis-
tion on the smartphone display.
played over the guidance display.
*
: If equipped
4-5. Using the driving support systems359■ Brake control operation whenParking using the perpendicularAdvanced Park is operatingparking (forward/reverse) func-While the Advanced Park is operating, iftionthe system determines that the possibility ofcollision with detected moving or stationary1 Stop the vehicle at a position closeobject is high, the hybrid system outputrestriction control and brake control willand perpendicular to the center target parking brake control operates, Advanced Park If there are parking space linesoperation will be suspended and a messagewill be displayed on the multi-informationdisplay.■ BuzzerDepending on surrounding sounds orsounds from other systems, it may be diffi-cult to hear the buzzer of this system.■ If a black screen is displayed on theCenter Display when the AdvancedPark is operating4The system is being affected by radio wavesor may be malfunctioning. If a radio antennaA Approximately 1 m (3.3 ft.) *Drivingis installed near a camera, move it to a loca-tion as far from the cameras as possible. If aB Approximately 2.5 m (8.2 ft.) *radio antenna is not installed near a camera,and the screen does not return to normalC Approximately 5 m (16.4 ft.) orafter turning the power switch off and thenmore *starting the hybrid system again, have thevehicle inspected by any authorized LexusD Approximately 5.5 m (18.0 ft.) orretailer or Lexus authorized repairer, or anyreliable *The system can operate even if there is aPerpendicular parking (for-parking space line on only one side of theward/reverse) functiontarget parking space.*The perpendicular parking (for-: This is a reference measurement fordetection of a parking space. Dependingward/reverse) function can be used ifon the surrounding environment, detec-the target parking space can betion may not be when the vehicle is stoppedclose and perpendicular to the centerof the parking space. Also, dependingon the condition of the parking space
4-5. Using the driving support systems
359
■ Brake control operation when
Parking using the perpendicular
Advanced Park is operating
parking (forward/reverse) func-
While the Advanced Park is operating, if
tion
the system determines that the possibility of
collision with detected moving or stationary
1 Stop the vehicle at a position close
object is high, the hybrid system output
restriction control and brake control will
and perpendicular to the center of
operate.
the target parking space.
If brake control operates, Advanced Park
 If there are parking space lines
operation will be suspended and a message
will be displayed on the multi-information
display.
■ Buzzer
Depending on surrounding sounds or
sounds from other systems, it may be diffi-
cult to hear the buzzer of this system.
■ If a black screen is displayed on the
Center Display when the Advanced
Park is operating
4
The system is being affected by radio waves
or may be malfunctioning. If a radio antenna
A Approximately 1 m (3.3 ft.) *
Driving
is installed near a camera, move it to a loca-
tion as far from the cameras as possible. If a
B Approximately 2.5 m (8.2 ft.) *
radio antenna is not installed near a camera,
and the screen does not return to normal
C Approximately 5 m (16.4 ft.) or
after turning the power switch off and then
more *
starting the hybrid system again, have the
vehicle inspected by any authorized Lexus
D Approximately 5.5 m (18.0 ft.) or
retailer or Lexus authorized repairer, or any
reliable repairer.
more *
The system can operate even if there is a
Perpendicular parking (for-
parking space line on only one side of the
ward/reverse) function
target parking space.
*
The perpendicular parking (for-
: This is a reference measurement for
detection of a parking space. Depending
ward/reverse) function can be used if
on the surrounding environment, detec-
the target parking space can be
tion may not be possible.
detected when the vehicle is stopped
close and perpendicular to the center
of the parking space. Also, depending
on the condition of the parking space,
etc., if it is necessary to change the
direction of travel of the vehicle, the
shift position can be changed by assis-
tance control.
3604-5. Using the driving support systems If there is an adjacent parked vehi-parking space is displayed on thecleCenter Display.A Approximately 1 m (3.3 ft.) *B Approximately 3 m (9.8 ft.) ormore * If a space which your vehicle can beC Approximately 5 m (16.4 ft.) orparked is detected, a target parkingmore *space box will be displayed.D Approximately 5.5 m (18.0 ft.) or If it is possible to parallel park in themore *space, select the parking space, andThe system can operate even if there is athen selectto change to the par-vehicle on only one side of the target park-allel parking space. If it is possible to change the direc-*: This is a reference measurement fortion which a parking space isdetection of a parking space. Dependingentered, select the parking space,on the surrounding environment, detec-tion may not be then selectorchangethe direction.2 Press the Advanced Park mainswitch and check that a possible Depending on the surroundingenvironment, it may not be possibleto use this function. According tothe information displayed on theCenter Display, use the function onanother parking space.3 Select “Start” button.A buzzer will sound, an operation messagewill be displayed on the multi-informationdisplay, and assistance will begin operat-
360
4-5. Using the driving support systems
 If there is an adjacent parked vehi-
parking space is displayed on the
cle
Center Display.
A Approximately 1 m (3.3 ft.) *
B Approximately 3 m (9.8 ft.) or
more *
 If a space which your vehicle can be
C Approximately 5 m (16.4 ft.) or
parked is detected, a target parking
more *
space box will be displayed.
D Approximately 5.5 m (18.0 ft.) or
 If it is possible to parallel park in the
more *
space, select the parking space, and
The system can operate even if there is a
then select
to change to the par-
vehicle on only one side of the target park-
allel parking function.
ing space.
 If it is possible to change the direc-
*
: This is a reference measurement for
tion which a parking space is
detection of a parking space. Depending
entered, select the parking space,
on the surrounding environment, detec-
tion may not be possible.
and then select
or
change
the direction.
2 Press the Advanced Park main
switch and check that a possible
 Depending on the surrounding
environment, it may not be possible
to use this function. According to
the information displayed on the
Center Display, use the function on
another parking space.
3 Select “Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
4-5. Using the driving support systems361ing.■ If you feel that the vehicle is approach-ing close to a surrounding vehicle,object, person, or gutterDepress the brake pedal to stop the vehicleand then change the shift position tochange the direction of travel of the this time, assist will be suspended. How-ever, if the “Start” button is selected, assistwill resume and the vehicle will move in thedirection corresponding to the selectedshift position. When the brake pedal is released,■ When the brakes have been operatedWhen the brakes have been operated,“Moving Forward…”, “Backing Up…”brake operation sound may be heard. Thiswill be displayed and the vehicle willdoes not indicate a moving forward/reverse. To cancel assistance, press theNOTICEAdvanced Park main switch.■ When using the perpendicular park-4ing (forward/reverse) functionIf assistance is canceled, “Advanced Park● Make sure that there are no obstruc-Canceled” will be within the yellow guide lines andIf you feel that the vehicle is approachingbetween the vehicle and target park-close to a surrounding vehicle, object, per-ing spot. If there are any obstructionsson, or gutter: P.361between the vehicle and the targetparking space, or between the yellow4 Perform operations as indicated byguide lines, cancel the advice displays until the vehicle● As the target parking space will not bestops in the target parking to be set correctly if the surface ofthe parking space is on a slope or hasWhen the vehicle stops, “Advanced Parkdifferences in height, the vehicle mayFinished” will be displayed and parkingstray from the target parking space orassistance will slanted. Therefore, do not use thefunction for this kind of parking you selecton the Center Display, thevehicle displayed on the parking assist● When parking in a narrow parkingcompletion screen will , the vehicle may closelyapproach an adjacent parked
4-5. Using the driving support systems
361
ing.
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
object, person, or gutter
Depress the brake pedal to stop the vehicle
and then change the shift position to
change the direction of travel of the vehicle.
At this time, assist will be suspended. How-
ever, if the “Start” button is selected, assist
will resume and the vehicle will move in the
direction corresponding to the selected
shift position.
 When the brake pedal is released,
■ When the brakes have been operated
When the brakes have been operated,
“Moving Forward…”, “Backing Up…”
brake operation sound may be heard. This
will be displayed and the vehicle will
does not indicate a malfunction.
begin moving forward/reverse.
 To cancel assistance, press the
NOTICE
Advanced Park main switch.
■ When using the perpendicular park-
4
ing (forward/reverse) function
If assistance is canceled, “Advanced Park
● Make sure that there are no obstruc-
Canceled” will be displayed.
Driving
tions within the yellow guide lines and
If you feel that the vehicle is approaching
between the vehicle and target park-
close to a surrounding vehicle, object, per-
ing spot. If there are any obstructions
son, or gutter: P.361
between the vehicle and the target
parking space, or between the yellow
4 Perform operations as indicated by
guide lines, cancel the function.
the advice displays until the vehicle
● As the target parking space will not be
stops in the target parking space.
able to be set correctly if the surface of
the parking space is on a slope or has
When the vehicle stops, “Advanced Park
differences in height, the vehicle may
Finished” will be displayed and parking
stray from the target parking space or
assistance will end.
be slanted. Therefore, do not use the
function for this kind of parking spot.
If you select
on the Center Display, the
vehicle displayed on the parking assist
● When parking in a narrow parking
completion screen will rotate.
space, the vehicle may closely
approach an adjacent parked vehicle.
If a collision seems likely, depress the
brake pedal to stop the vehicle.
3624-5. Using the driving support systemsselection screen is displayed on theNOTICECenter Display.● If a detected parked vehicle is narrowor parked extremely close to the curb,the position at which assistance willpark the vehicle will also be close tothe curb. If it seems likely the vehiclewill collide with something or drive offof the road, depress the brake pedal tostop the vehicle, and then press theAdvance Park main switch to disablethe Park perpendicularexiting (forward/reverse) func-tionWhen exiting from a perpendicular2 Select an arrow on the Center Dis-parking space, if the system deter-play to select the direction you wishmines that exit is possible the perpen-to exiting (forward/reverse)If the turn signal lever is operated, only exitfunction can be used. Also, dependingto the left or right can be the surrounding environment, if it is3 Depress the brake pedal and selectnecessary to change the direction of“Start” of the vehicle, the shift positionA buzzer will sound, an operation messagecan be changed by assistance be displayed on the multi-informationdisplay, and assistance will begin a parking space using theperpendicular exiting (for-ward/reverse) function1 With the brake pedal depressedand P shift position selected, pressthe Advanced Park main switchand check that the exit directionTo cancel assistance, press the AdvancedPark main switch. If assistance is canceled,“Advanced Park Canceled” will be you feel that the vehicle is approachingclose to a surrounding vehicle, object, per-
362
4-5. Using the driving support systems
selection screen is displayed on the
NOTICE
Center Display.
● If a detected parked vehicle is narrow
or parked extremely close to the curb,
the position at which assistance will
park the vehicle will also be close to
the curb. If it seems likely the vehicle
will collide with something or drive off
of the road, depress the brake pedal to
stop the vehicle, and then press the
Advance Park main switch to disable
the system.
Advanced Park perpendicular
exiting (forward/reverse) func-
tion
When exiting from a perpendicular
2 Select an arrow on the Center Dis-
parking space, if the system deter-
play to select the direction you wish
mines that exit is possible the perpen-
to exit.
dicular exiting (forward/reverse)
If the turn signal lever is operated, only exit
function can be used. Also, depending
to the left or right can be selected.
on the surrounding environment, if it is
3 Depress the brake pedal and select
necessary to change the direction of
“Start” button.
travel of the vehicle, the shift position
A buzzer will sound, an operation message
can be changed by assistance control.
will be displayed on the multi-information
display, and assistance will begin operat-
ing.
Leaving a parking space using the
perpendicular exiting (for-
ward/reverse) function
1 With the brake pedal depressed
and P shift position selected, press
the Advanced Park main switch
and check that the exit direction
To cancel assistance, press the Advanced
Park main switch. If assistance is canceled,
“Advanced Park Canceled” will be dis-
played.
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
4-5. Using the driving support systems363son, or gutter: P.361tion will not operate:4 Perform operations as indicated by● When a vehicle which is waiting to park isin the exit directionthe advice displays until the vehicleis in a position where exit is the vehicle reaches a positionwhere exit is possible, “You can exit bymoving the steering wheel” will be dis-played. If the steering wheel is operated,“Advanced Park Finished” will be dis-played and assistance will end. As assis-● When a wall, column, or person istance will end while the vehicle is moving,detected as near a front or rear center orgrip the steering wheel and drive sensorIf the steering wheel is not operated, thevehicle will stop at the exit position. Assis-tance can be ended by depressing theaccelerator pedal or brake pedal.4Driving■ When the brakes have been operatedP.361Advanced Park parallel parkingfunction■ If you feel that the vehicle is approach-ing close to a surrounding vehicle,The parallel parking function can beobject, person, or gutterused if the target parking space can beP.361detected when the vehicle is stopped■ Perpendicular exiting (for-close and aligned with the center of theward/reverse) functionparking space. Also, depending on theDo not use perpendicular exiting (for-condition of the parking space, etc., if itward/reverse) function in any situationis necessary to change the direction ofother than when exiting a perpendicularparking spot. If assistance is started unin-travel of the vehicle, the shift positiontentionally, depress the brake pedal andcan be changed by assistance the vehicle, then press the AdvancedPark main switch to cancel assistance.■ Situations in which the perpendicularexiting (forward/reverse) function willnot operateIn situations such as the following, the per-pendicular exiting (forward/reverse) func-
4-5. Using the driving support systems
363
son, or gutter: P.361
tion will not operate:
4 Perform operations as indicated by
● When a vehicle which is waiting to park is
in the exit direction
the advice displays until the vehicle
is in a position where exit is possi-
ble.
When the vehicle reaches a position
where exit is possible, “You can exit by
moving the steering wheel” will be dis-
played. If the steering wheel is operated,
“Advanced Park Finished” will be dis-
played and assistance will end. As assis-
● When a wall, column, or person is
tance will end while the vehicle is moving,
detected as near a front or rear center or
grip the steering wheel and drive forward.
corner sensor
If the steering wheel is not operated, the
vehicle will stop at the exit position. Assis-
tance can be ended by depressing the
accelerator pedal or brake pedal.
4
Driving
■ When the brakes have been operated
P.361
Advanced Park parallel parking
function
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
The parallel parking function can be
object, person, or gutter
used if the target parking space can be
P.361
detected when the vehicle is stopped
■ Perpendicular exiting (for-
close and aligned with the center of the
ward/reverse) function
parking space. Also, depending on the
Do not use perpendicular exiting (for-
condition of the parking space, etc., if it
ward/reverse) function in any situation
is necessary to change the direction of
other than when exiting a perpendicular
parking spot. If assistance is started unin-
travel of the vehicle, the shift position
tentionally, depress the brake pedal and
can be changed by assistance control.
stop the vehicle, then press the Advanced
Park main switch to cancel assistance.
■ Situations in which the perpendicular
exiting (forward/reverse) function will
not operate
In situations such as the following, the per-
pendicular exiting (forward/reverse) func-
3644-5. Using the driving support systems If there is an adjacent parked vehi-Parking using the parallel parkingclefunction1 Stop the vehicle with it aligned nearthe center of the target parkingspace. If there are parking space linesA Approximately 1 m (3.3 ft.) *B Approximately 6 m (19.7 ft.) * ormoreC Approximately 4.5 m (14.8 ft.) ormore *A Approximately 1 m (3.3 ft.) *B Approximately 5 m (16.4 ft.) *D Approximately 8 m (26.2 ft.) ormore *C Approximately 4.5 m (14.8 ft.) or*: This is a reference measurement formore *detection of a parking space. DependingD Approximately 8 m (26.2 ft.) oron the surrounding environment, detec-more *tion may not be possible.2 Press the Advanced Park main*: This is a reference measurement forswitch and check that a possibledetection of a parking space. Dependingon the surrounding environment, detec-tion may not be possible.
364
4-5. Using the driving support systems
 If there is an adjacent parked vehi-
Parking using the parallel parking
cle
function
1 Stop the vehicle with it aligned near
the center of the target parking
space.
 If there are parking space lines
A Approximately 1 m (3.3 ft.) *
B Approximately 6 m (19.7 ft.) * or
more
C Approximately 4.5 m (14.8 ft.) or
more *
A Approximately 1 m (3.3 ft.) *
B Approximately 5 m (16.4 ft.) *
D Approximately 8 m (26.2 ft.) or
more *
C Approximately 4.5 m (14.8 ft.) or
*
: This is a reference measurement for
more *
detection of a parking space. Depending
D Approximately 8 m (26.2 ft.) or
on the surrounding environment, detec-
more *
tion may not be possible.
2 Press the Advanced Park main
*
: This is a reference measurement for
switch and check that a possible
detection of a parking space. Depending
on the surrounding environment, detec-
tion may not be possible.
4-5. Using the driving support systems365parking space is displayed on Display. When the brake pedal is released,“Moving Forward…” will be dis-played and the vehicle will beginmoving forward. To cancel assistance, press the If a space which your vehicle can beAdvanced Park main switch.4parked is detected, a target parkingIf assistance is canceled, “Advanced Parkspace box will be ” will be  If it is possible to perpendicularIf you feel that the vehicle is approachingparking (forward/reverse) in theclose to a surrounding vehicle, object, per-son, or gutter: P.361space, select the parking space, and4 Perform operations as indicated bythen selectto change to the per-the advice displays until the vehiclependicular parking (for-stops in the target parking the vehicle stops, “Advanced Park Depending on the surroundingFinished” will be displayed and parkingenvironment, it may not be possibleassistance will use this function. According toIf you selecton the Center Display, thethe information displayed on thevehicle displayed on the parking assistCenter Display, use the function oncompletion screen will parking space.3 Select “Start” button.A buzzer will sound, an operation messagewill be displayed on the multi-informationdisplay, and assistance will begin operat-
4-5. Using the driving support systems
365
parking space is displayed on the
ing.
Center Display.
 When the brake pedal is released,
“Moving Forward…” will be dis-
played and the vehicle will begin
moving forward.
 To cancel assistance, press the
 If a space which your vehicle can be
Advanced Park main switch.
4
parked is detected, a target parking
If assistance is canceled, “Advanced Park
space box will be displayed.
Canceled” will be displayed.
Driving
 If it is possible to perpendicular
If you feel that the vehicle is approaching
parking (forward/reverse) in the
close to a surrounding vehicle, object, per-
son, or gutter: P.361
space, select the parking space, and
4 Perform operations as indicated by
then select
to change to the per-
the advice displays until the vehicle
pendicular parking (for-
stops in the target parking space.
ward/reverse) function.
When the vehicle stops, “Advanced Park
 Depending on the surrounding
Finished” will be displayed and parking
environment, it may not be possible
assistance will end.
to use this function. According to
If you select
on the Center Display, the
the information displayed on the
vehicle displayed on the parking assist
Center Display, use the function on
completion screen will rotate.
another parking space.
3 Select “Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
3664-5. Using the driving support systems● If an adjacent parked vehicle is narrow■ If you feel that the vehicle is approach-or parked extremely close to the curb,ing close to a surrounding vehicle,the position at which assistance willobject, person, or gutterpark the vehicle will also be close toP.361the curb. If it seems likely the vehiclewill collide with the curb or drive off of■ If “No available parking space” is dis-the road, depress the brake pedal toplayedstop the vehicle, and then press theEven if the vehicle is stopped parallel to aAdvanced Park main switch to disableparking space, an adjacent parked vehiclethe not be detected. In this case, if the vehi-cle is moved to a position that a parkedvehicle can be detected, assistance can bestarted.■ When the brakes have been operatedP.361NOTICE● If there is a wall or other barrier on theinner side of the parking space, the■ When using the parallel parking func-vehicle may stop at a position slightlytionoutside of the set target parking space.● Make sure that there are no obstruc-tions within the yellow guide lines andbetween the vehicle and target park-Advanced Park parallel exitinging spot. If any obstructions arefunctiondetected within the yellow guide linesor between the vehicle and the targetWhen exiting from a parallel parkingparking space, the parallel parkingfunction will be cancelled or sus-space, if the system determines is possible the parallel exiting func-● As the target parking space will not betion can be used. Also, depending onable to be set correctly if the surface ofthe surrounding environment, if it isthe parking space is on a slope or hasnecessary to change the direction ofdifferences in height, the vehicle maystray from the target parking space ortravel of the vehicle, the shift positionbe slanted. Therefore, do not use thecan be changed by assistance parking function for this kind ofparking spot.
366
4-5. Using the driving support systems
● If an adjacent parked vehicle is narrow
■ If you feel that the vehicle is approach-
or parked extremely close to the curb,
ing close to a surrounding vehicle,
the position at which assistance will
object, person, or gutter
park the vehicle will also be close to
P.361
the curb. If it seems likely the vehicle
will collide with the curb or drive off of
■ If “No available parking space” is dis-
the road, depress the brake pedal to
played
stop the vehicle, and then press the
Even if the vehicle is stopped parallel to a
Advanced Park main switch to disable
parking space, an adjacent parked vehicle
the system.
may not be detected. In this case, if the vehi-
cle is moved to a position that a parked
vehicle can be detected, assistance can be
started.
■ When the brakes have been operated
P.361
NOTICE
● If there is a wall or other barrier on the
inner side of the parking space, the
■ When using the parallel parking func-
vehicle may stop at a position slightly
tion
outside of the set target parking space.
● Make sure that there are no obstruc-
tions within the yellow guide lines and
between the vehicle and target park-
Advanced Park parallel exiting
ing spot. If any obstructions are
function
detected within the yellow guide lines
or between the vehicle and the target
When exiting from a parallel parking
parking space, the parallel parking
function will be cancelled or sus-
space, if the system determines that
pended.
exit is possible the parallel exiting func-
● As the target parking space will not be
tion can be used. Also, depending on
able to be set correctly if the surface of
the surrounding environment, if it is
the parking space is on a slope or has
necessary to change the direction of
differences in height, the vehicle may
stray from the target parking space or
travel of the vehicle, the shift position
be slanted. Therefore, do not use the
can be changed by assistance control.
parallel parking function for this kind of
parking spot.
4-5. Using the driving support systems3674 Perform operations as indicated byLeaving a parking space using thethe advice displays until the vehicleparallel exiting functionis in a position where exit is possi-1 With the brake pedal P shift position selected, pressWhen the vehicle reaches a positionthe Advanced Park main switchwhere exit is possible, “You can exit bymoving the steering wheel” will be dis-and check that the exit directionplayed. If the steering wheel is operated,selection screen is displayed on the“Advanced Park Finished” will be dis-Center and assistance will assistance will end while the vehicle ismoving, grip the steering wheel and the steering wheel is not operated, thevehicle will stop at the exit position. Assis-tance can be ended by depressing theaccelerator pedal or brake pedal.4Driving2 Select an arrow on the Center Dis-play to select the direction you wishto the turn signal lever is operated, only exitto the left or right can be selected.3 Depress the brake pedal and select“Start” button.A buzzer will sound, an operation messagewill be displayed on the multi-informationdisplay, and assistance will begin operat-ing.■ If you feel that the vehicle is approach-To cancel assistance, press the Advanceding close to a surrounding vehicle,Park main , person, or gutterIf assistance is canceled, “Advanced ParkP.361Canceled” will be displayed.■ Parallel exiting functionIf you feel that the vehicle is approachingclose to a surrounding vehicle, object, per-Do not use parallel exiting function in anyson, or gutter: P.361situation other than when exiting a parallelparking spot. If assistance is started unin-
4-5. Using the driving support systems
367
4 Perform operations as indicated by
Leaving a parking space using the
the advice displays until the vehicle
parallel exiting function
is in a position where exit is possi-
1 With the brake pedal depressed
ble.
and P shift position selected, press
When the vehicle reaches a position
the Advanced Park main switch
where exit is possible, “You can exit by
moving the steering wheel” will be dis-
and check that the exit direction
played. If the steering wheel is operated,
selection screen is displayed on the
“Advanced Park Finished” will be dis-
Center Display.
played and assistance will end.
As assistance will end while the vehicle is
moving, grip the steering wheel and drive
forward.
If the steering wheel is not operated, the
vehicle will stop at the exit position. Assis-
tance can be ended by depressing the
accelerator pedal or brake pedal.
4
Driving
2 Select an arrow on the Center Dis-
play to select the direction you wish
to exit.
If the turn signal lever is operated, only exit
to the left or right can be selected.
3 Depress the brake pedal and select
“Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
ing.
■ If you feel that the vehicle is approach-
To cancel assistance, press the Advanced
ing close to a surrounding vehicle,
Park main switch.
object, person, or gutter
If assistance is canceled, “Advanced Park
P.361
Canceled” will be displayed.
■ Parallel exiting function
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
Do not use parallel exiting function in any
son, or gutter: P.361
situation other than when exiting a parallel
parking spot. If assistance is started unin-
3684-5. Using the driving support systemstentionally, depress the brake pedal andstop the vehicle, then press the AdvancedPark main switch to cancel assistance.■ Situations in which the parallel exitingfunction will not operateIn situations such as the following, the paral-lel exiting function will not operate:● When vehicles waiting at a traffic signal in● When a vehicle is not parked in front ofthe exit directionthe vehicle● When there is excessive space betweenthe front of the vehicle and a parked vehi-cle■ When the brakes have been operatedP.361Advanced Park memory func-● When a vehicle is stopped in the areationbehind where the vehicle will exitThe memory function can be used topark in a previously registered parkingspace, even if there are no parkingspace lines or adjacent parked to 3 parking spaces can be regis-tered.● When a wall, column, or person isdetected as near a front or rear side sen-sorRegistering a parking space1 Stop the vehicle with it aligned nearthe center of the target parkingspace.● When the vehicle has been parked on acurb and a side sensor detects the roadsurface
368
4-5. Using the driving support systems
tentionally, depress the brake pedal and
stop the vehicle, then press the Advanced
Park main switch to cancel assistance.
■ Situations in which the parallel exiting
function will not operate
In situations such as the following, the paral-
lel exiting function will not operate:
● When vehicles waiting at a traffic signal in
● When a vehicle is not parked in front of
the exit direction
the vehicle
● When there is excessive space between
the front of the vehicle and a parked vehi-
cle
■ When the brakes have been operated
P.361
Advanced Park memory func-
● When a vehicle is stopped in the area
tion
behind where the vehicle will exit
The memory function can be used to
park in a previously registered parking
space, even if there are no parking
space lines or adjacent parked vehi-
cles.
Up to 3 parking spaces can be regis-
tered.
● When a wall, column, or person is
detected as near a front or rear side sen-
sor
Registering a parking space
1 Stop the vehicle with it aligned near
the center of the target parking
space.
● When the vehicle has been parked on a
curb and a side sensor detects the road
surface
4-5. Using the driving support systems369ward/reverse) was selected in step 3:A Approximately 1 m (3.3 ft.)2 Press the Advanced Park mainswitch and then the Advanced Park main switch ispressed at a parking space without parkinglines or any adjacent parked vehicles, “Noavailable parking space” may be select and parallel parking was selected in step3:4Driving5 Using the arrow buttons, adjust theposition of the parking space to be3 Select perpendicular parking (for-registered, and then select “OK”ward/reverse) function or parking spaces for which assist canbe performed are displayed.6 Select “Start” button.A buzzer will sound, an operation messagewill be displayed on the multi-information4 Select the parking direction, anddisplay, and assistance will begin operat-then select “OK” . When the brake pedal is released,“Moving Forward…” will be displayed andWhen perpendicular parking (for-the vehicle will begin moving forward.
4-5. Using the driving support systems
369
ward/reverse) was selected in step 3:
A Approximately 1 m (3.3 ft.)
2 Press the Advanced Park main
switch and then select
.
If the Advanced Park main switch is
pressed at a parking space without parking
lines or any adjacent parked vehicles, “No
available parking space” may be displayed.
Continuously select and hold
.
When parallel parking was selected in step
3:
4
Driving
5 Using the arrow buttons, adjust the
position of the parking space to be
3 Select perpendicular parking (for-
registered, and then select “OK”
ward/reverse) function or parallel
button.
parking function.
Only parking spaces for which assist can
be performed are displayed.
6 Select “Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
4 Select the parking direction, and
display, and assistance will begin operat-
then select “OK” button.
ing. When the brake pedal is released,
“Moving Forward…” will be displayed and
When perpendicular parking (for-
the vehicle will begin moving forward.
3704-5. Using the driving support systemsIf you feel that the vehicle is approachingthere are no obstructions within theclose to a surrounding vehicle, object, per-area shown by the thick , or gutter: P.361 The amount that the position of theparking spot to be registered can beadjusted is parking in a parking spaceregistered to the memory func-tion1 Stop the vehicle with it aligned nearthe center of the target parkingspace.7 Perform operations as indicated bythe advice displays until the vehiclestops in the target parking space.A Approximately 1 m (3.3 ft.)8 Check the position that the vehiclehas stopped. If necessary, adjust2 Press the Advanced Park mainthe position of the parking spot toswitch and check that a possiblebe registered using the arrow but-parking space is displayed on thetons, and then select “Reg.” Display.“Registration Completed” will be displayedIf the “MODE” button is displayed, the but-on the Center can be touched to change between thememory function, perpendicular parking(forward/reverse) function and parallel Register the parking space only if
370
4-5. Using the driving support systems
If you feel that the vehicle is approaching
there are no obstructions within the
close to a surrounding vehicle, object, per-
area shown by the thick lines.
son, or gutter: P.361
 The amount that the position of the
parking spot to be registered can be
adjusted is limited.
When parking in a parking space
registered to the memory func-
tion
1 Stop the vehicle with it aligned near
the center of the target parking
space.
7 Perform operations as indicated by
the advice displays until the vehicle
stops in the target parking space.
A Approximately 1 m (3.3 ft.)
8 Check the position that the vehicle
has stopped. If necessary, adjust
2 Press the Advanced Park main
the position of the parking spot to
switch and check that a possible
be registered using the arrow but-
parking space is displayed on the
tons, and then select “Reg.” button.
Center Display.
“Registration Completed” will be displayed
If the “MODE” button is displayed, the but-
on the Center Display.
ton can be touched to change between the
memory function, perpendicular parking
(forward/reverse) function and parallel
 Register the parking space only if
4-5. Using the driving support systems371parking “Start” button.■ When the brakes have been operatedP.361NOTICE■ When using the memory function(P.361, 366)3 Select the desired parking space,● The memory function is a functionand then select “Start” provides assistance in parking in4a previously registered parking the procedure for the perpendic-If the condition of the road surface,ular parking (forward/reverse) functionvehicle, or surrounding area differsDrivingfrom step 3. (P.359)from when registration was per-formed, the parking space may not beable to be detected correctly or assis-■ If you feel that the vehicle is approach-tance may not be provided to the pointing close to a surrounding vehicle,that the vehicle is fully , person, or gutterP.361● Do not register a parking space in situ-ations such as the following, as the set■ When overwriting a registered parkingparking space may not be able to bespaceregistered or assistance may not beIf the maximum number of parking spacespossible been registered andis selected, a• When a camera lens is dirty or cov-ered with water dropletsregistered parking space can be selectedand then overwritten with a new parking• When it is raining or snowingspace.• When the surrounding area is dark (atnight, etc.)● In situations such as the following, itmay not be possible to register a park-ing space.• When there is insufficient spacebetween the road and parking space• When the road surface around the■ When multiple parking spaces are reg-parking space does not have any dif-isteredferences the system can recognizeSelect the desired parking space, and then
4-5. Using the driving support systems
371
parking function.
select “Start” button.
■ When the brakes have been operated
P.361
NOTICE
■ When using the memory function
(P.361, 366)
3 Select the desired parking space,
● The memory function is a function
and then select “Start” button.
which provides assistance in parking in
4
a previously registered parking space.
Perform the procedure for the perpendic-
If the condition of the road surface,
ular parking (forward/reverse) function
vehicle, or surrounding area differs
Driving
from step 3. (P.359)
from when registration was per-
formed, the parking space may not be
able to be detected correctly or assis-
■ If you feel that the vehicle is approach-
tance may not be provided to the point
ing close to a surrounding vehicle,
that the vehicle is fully parked.
object, person, or gutter
P.361
● Do not register a parking space in situ-
ations such as the following, as the set
■ When overwriting a registered parking
parking space may not be able to be
space
registered or assistance may not be
If the maximum number of parking spaces
possible later.
have been registered and
is selected, a
• When a camera lens is dirty or cov-
ered with water droplets
registered parking space can be selected
and then overwritten with a new parking
• When it is raining or snowing
space.
• When the surrounding area is dark (at
night, etc.)
● In situations such as the following, it
may not be possible to register a park-
ing space.
• When there is insufficient space
between the road and parking space
• When the road surface around the
■ When multiple parking spaces are reg-
parking space does not have any dif-
istered
ferences the system can recognize
Select the desired parking space, and then
3724-5. Using the driving support systems• When the position the vehicle isNOTICEstopped when assistance is started dif-● If a parking space has been registeredfers from the position when registra-in situations such as the following,tion was performedassistance may not be able to bestarted later or assistance to the regis-• When the registered parking spacetered position may not be be reached due to the exis-tence of parking blocks, etc.• When shadows are cast on the park-ing space (there is a carport over the• When the road surface around theparking space, etc.)parking space has changed (road sur-face has degraded or been resur-faced)• When the sunlight conditions differfrom when registration was performed(due to weather or time of day)• When the sun is shining directly into acamera, such as in the early morningor evening• When there are leaves, garbage, or• When the color or brightness of theother objects which will likely move, inroad surface is uneventhe parking space• When a light is temporarily shined on• When the road surface around thethe parking space (lights of anotherparking space has the same repeatingvehicle, security light, etc.)pattern (brick, etc.)• When the road surface around theparking space has the same repeatingpattern• When there is a low protrusion on theroad surface near the parking space• When the parking space is on a slope• When a camera has been splashed by● In situations such as the following, ithot or cold water and the lens hasmay not be possible for the system tofogged upprovide assistance to a registeredparking spot:• When a camera lens is dirty or cov-ered with water droplets• When the appearance of the parkingspace is affected by the shadow of the• When accessories which obstruct thevehicle or treesview of the camera are installedIf assistance is ended during registra-• When an object is detected in the reg-tion, perform registration parking space• When a pedestrian or passing vehicleis detected during
372
4-5. Using the driving support systems
• When the position the vehicle is
NOTICE
stopped when assistance is started dif-
● If a parking space has been registered
fers from the position when registra-
in situations such as the following,
tion was performed
assistance may not be able to be
started later or assistance to the regis-
• When the registered parking space
tered position may not be possible.
cannot be reached due to the exis-
tence of parking blocks, etc.
• When shadows are cast on the park-
ing space (there is a carport over the
• When the road surface around the
parking space, etc.)
parking space has changed (road sur-
face has degraded or been resur-
faced)
• When the sunlight conditions differ
from when registration was performed
(due to weather or time of day)
• When the sun is shining directly into a
camera, such as in the early morning
or evening
• When there are leaves, garbage, or
• When the color or brightness of the
other objects which will likely move, in
road surface is uneven
the parking space
• When a light is temporarily shined on
• When the road surface around the
the parking space (lights of another
parking space has the same repeating
vehicle, security light, etc.)
pattern (brick, etc.)
• When the road surface around the
parking space has the same repeating
pattern
• When there is a low protrusion on the
road surface near the parking space
• When the parking space is on a slope
• When a camera has been splashed by
● In situations such as the following, it
hot or cold water and the lens has
may not be possible for the system to
fogged up
provide assistance to a registered
parking spot:
• When a camera lens is dirty or cov-
ered with water droplets
• When the appearance of the parking
space is affected by the shadow of the
• When accessories which obstruct the
vehicle or trees
view of the camera are installed
If assistance is ended during registra-
• When an object is detected in the reg-
tion, perform registration again.
istered parking space
• When a pedestrian or passing vehicle
is detected during assistance
4-5. Using the driving support systems373condition of the parking space, etc., if itNOTICEis necessary to change the direction of● When registering a parking space totravel of the vehicle, the shift positionthe memory function, if the road sur-can be changed by assistance cannot be detected “No availableparking space to register” will be dis-1 Stop the vehicle with it aligned center of the target parking● When using the memory function,space. (P.359, 364)make sure to stop immediately in frontof the stop position. Otherwise the2 Press the Advanced Park mainparking space may not be able to beswitch and check that a possibledetected correctly or assistance mayparking space is displayed on thenot be provided to the point that thevehicle is fully Display. (P.359, 364)● Do not use the memory function if a3 Selectand then select “Perpen-camera has been subjected to a strongdicular/parallel”.impact or images of the panoramicview monitor are misaligned.4 Select “OK” button.4● If a camera has been replaced, as the5 Exit the vehicle while carrying theinstallation angle of the camera willelectronic key and smartphone,have changed, it will be necessary toDrivingreregister parking spaces of the mem-and then start the dedicated detection area of the electronic key iswithin approximately 3 m (9.8 ft.) aroundthe control function (ifIf there is an obstruction in the path of theequipped)vehicle, move it before parking the obstruction can also be moved afterA smartphone can be used to remotelyexiting the the parking functions and exit6 From outside of the vehicle, con-functions. Also, assistance can be pro-firm the parking space on thevided to remotely move the vehiclescreen of the smartphone and thenforward or backward into a garage,execute the start operation of Remote control functionwhile standing approximately 50 cm (1.6Parking using Remote controlft.) or
4-5. Using the driving support systems
373
condition of the parking space, etc., if it
NOTICE
is necessary to change the direction of
● When registering a parking space to
travel of the vehicle, the shift position
the memory function, if the road sur-
can be changed by assistance control.
face cannot be detected “No available
parking space to register” will be dis-
1 Stop the vehicle with it aligned near
played.
the center of the target parking
● When using the memory function,
space. (P.359, 364)
make sure to stop immediately in front
of the stop position. Otherwise the
2 Press the Advanced Park main
parking space may not be able to be
switch and check that a possible
detected correctly or assistance may
parking space is displayed on the
not be provided to the point that the
vehicle is fully parked.
Center Display. (P.359, 364)
● Do not use the memory function if a
3 Select
and then select “Perpen-
camera has been subjected to a strong
dicular/parallel”.
impact or images of the panoramic
view monitor are misaligned.
4 Select “OK” button.
4
● If a camera has been replaced, as the
5 Exit the vehicle while carrying the
installation angle of the camera will
electronic key and smartphone,
have changed, it will be necessary to
Driving
reregister parking spaces of the mem-
and then start the dedicated app.
ory function.
The detection area of the electronic key is
within approximately 3 m (9.8 ft.) around
the vehicle.
Remote control function (if
If there is an obstruction in the path of the
equipped)
vehicle, move it before parking the vehicle.
An obstruction can also be moved after
A smartphone can be used to remotely
exiting the vehicle.
operate the parking functions and exit
6 From outside of the vehicle, con-
functions. Also, assistance can be pro-
firm the parking space on the
vided to remotely move the vehicle
screen of the smartphone and then
forward or backward into a garage,
execute the start operation.
etc.
Start operation of Remote control function
while standing approximately 50 cm (1.6
Parking using Remote control
ft.) or more from the vehicle and out of the
path of the vehicle.
function
7 Checking the safety of the area
A smartphone can be used to remotely
around the vehicle, operate the
operate the parking function if the tar-
screen of the smartphone.
get parking space can be detected
While continuously operating the
when the vehicle is stopped close and
operation area, the vehicle will
perpendicular to the center of the
move and parking assistance will
parking space. Also, depending on the
be performed.
3744-5. Using the driving support systemsIf operation of the screen of the smart-and backward movement is stopped, assistance can be sus-1 Stop the vehicle at the location youpended and the vehicle can be like to start the operation of the screen of thesmartphone is resumed to move the vehi-cle, the vehicle will be locked automaticallybefore moving.8 When the parking space isreached, after the vehicle isstopped by the parking brake, theshift position will be changed to P,the power switch will be turned off,and the doors will be locked.2 Press the Advanced Park mainA completion screen will be displayed onthe .3 Selectand then select “For-■ The parking function can be used even ifobstructions exist ifward/reverse”.● When using the parking functions at a4 Adjust as necessary using directionparking space made of white lines, even ifan obstruction exists in the parkingkeys then select “OK” , the space can be set as the target5 Exit the vehicle while carrying theparking space. This allows for assistanceto continue after setting a parking spaceelectronic key and smartphone,from inside the vehicle and then exitingand then start the dedicated vehicle to move an obstruction, suchas a traffic cone placed in a handicappedThe detection area of the electronic key isparking approximately 3 m (9.8 ft.) aroundthe vehicle.● When perpendicular parking usingAdvanced Park, 3 parking spaces on6 From outside of the vehicle, con-each side of the vehicle (up to 6 total) canfirm the direction of travel on thebe detected. However, when usingscreen of the smartphone and thenRemote control function, only 1 parkingspace on each side of the vehicle can beexecute the start operation of Remote control function■ When the brakes have been operatedwhile standing approximately 50 cm (1.6P.361ft.) or more from the vehicle and out of thepath of the vehicle. The detection area ofthe ele
374
4-5. Using the driving support systems
If operation of the screen of the smart-
and backward movement function.
phone is stopped, assistance can be sus-
1 Stop the vehicle at the location you
pended and the vehicle can be stopped.
would like to start assistance.
When the operation of the screen of the
smartphone is resumed to move the vehi-
cle, the vehicle will be locked automatically
before moving.
8 When the parking space is
reached, after the vehicle is
stopped by the parking brake, the
shift position will be changed to P,
the power switch will be turned off,
and the doors will be locked.
2 Press the Advanced Park main
A completion screen will be displayed on
the smartphone.
switch.
3 Select
and then select “For-
■ The parking function can be used even if
obstructions exist if
ward/reverse”.
● When using the parking functions at a
4 Adjust as necessary using direction
parking space made of white lines, even if
an obstruction exists in the parking
keys then select “OK” button.
space, the space can be set as the target
5 Exit the vehicle while carrying the
parking space. This allows for assistance
to continue after setting a parking space
electronic key and smartphone,
from inside the vehicle and then exiting
and then start the dedicated app.
the vehicle to move an obstruction, such
as a traffic cone placed in a handicapped
The detection area of the electronic key is
parking space.
within approximately 3 m (9.8 ft.) around
the vehicle.
● When perpendicular parking using
Advanced Park, 3 parking spaces on
6 From outside of the vehicle, con-
each side of the vehicle (up to 6 total) can
firm the direction of travel on the
be detected. However, when using
screen of the smartphone and then
Remote control function, only 1 parking
space on each side of the vehicle can be
execute the start operation.
detected.
Start operation of Remote control function
■ When the brakes have been operated
while standing approximately 50 cm (1.6
P.361
ft.) or more from the vehicle and out of the
path of the vehicle. The detection area of
the electronic key is within approximately
Moving the vehicle forward and
3 m (9.8 ft.) around the vehicle.
backward using Remote control
7 Checking the safety of the area
function
around the vehicle, operate the
screen of the smartphone.
After the vehicle is stopped, assistance
can be provided to move the vehicle
While continuously operating the opera-
tion area, the vehicle will move and for-
into a garage, etc., by using the forward
4-5. Using the driving support systems375ward and reverse movement assistancetronic key, and then start the dedi-will be operation of the screen of the smart-If the dedicated app cannot connect to thephone is stopped, assistance can be sus-vehicle, use the electronic key to unlockpended and the vehicle can be doors assistance is being performed, it canbe stopped part way or the direction oftravel of the vehicle can be changed.8 Execute the power-off operation ofthe vehicle on the screen of thesmartphone. The power switch willthen turn OFF and the doors willlock automatically.■ Changing the direction of travel2 Execute the start operation on theWhile assistance is being performed, thescreen of the of travel of the vehicle can be4changed by the forward and reverse move-The power switch will change to function.3 Check that a possible exit directionWhen there is a wall behind the vehicle,Drivingis displayed, select the exit direc-etc., by executing a change in the directionof travel on the screen of the smartphone, vehicle can be slightly moved forward4 Checking the safety of the areato allow loading of items and then movedback to its original the vehicle, operate the■ When the brakes have been operatedscreen of the smartphone.P.361While continuously operating the opera-tion area, the vehicle will move and depar-ture assistance will be using Remote controlIf operation of the screen of the smart-functionphone is stopped, assistance can be sus-pended and the vehicle can be can be provided to exitWhile assistance is being performed it canfrom a perpendicular or parallel park-be stopped part way or the direction ofing space when the power switch of the vehicle can be forward and backward move-5 Move the vehicle to the positionment is selected, the maximum dis-where assistance ends and entertance the vehicle can mov
4-5. Using the driving support systems
375
ward and reverse movement assistance
tronic key, and then start the dedi-
will be performed.
cated app.
If operation of the screen of the smart-
If the dedicated app cannot connect to the
phone is stopped, assistance can be sus-
vehicle, use the electronic key to unlock
pended and the vehicle can be stopped.
the doors again.
While assistance is being performed, it can
be stopped part way or the direction of
travel of the vehicle can be changed.
8 Execute the power-off operation of
the vehicle on the screen of the
smartphone. The power switch will
then turn OFF and the doors will
lock automatically.
■ Changing the direction of travel
2 Execute the start operation on the
While assistance is being performed, the
screen of the smartphone.
direction of travel of the vehicle can be
4
changed by the forward and reverse move-
The power switch will change to ON.
ment function.
3 Check that a possible exit direction
When there is a wall behind the vehicle,
Driving
is displayed, select the exit direc-
etc., by executing a change in the direction
of travel on the screen of the smartphone,
tion.
the vehicle can be slightly moved forward
4 Checking the safety of the area
to allow loading of items and then moved
back to its original position.
around the vehicle, operate the
■ When the brakes have been operated
screen of the smartphone.
P.361
While continuously operating the opera-
tion area, the vehicle will move and depar-
ture assistance will be performed.
Exiting using Remote control
If operation of the screen of the smart-
function
phone is stopped, assistance can be sus-
pended and the vehicle can be stopped.
Assistance can be provided to exit
While assistance is being performed it can
from a perpendicular or parallel park-
be stopped part way or the direction of
ing space when the power switch OFF.
travel of the vehicle can be changed.
When forward and backward move-
5 Move the vehicle to the position
ment is selected, the maximum dis-
where assistance ends and enter
tance the vehicle can move is 7 m
the vehicle while carrying the elec-
(23.0 ft.) from the starting point and
tronic key.
possible to change the direction of
To stop assistance part way, stop operating
travel.
the smartphone or enter the vehicle.
1 While near the parked vehicle,
unlock the doors using the elec-
3764-5. Using the driving support systemsthe vehicle. If there is a cone or other■ When the brakes have been operatedobstruction in the path of the vehicle, moveP.361it after exiting the vehicle.6 From outside of the vehicle, con-firm the parking space on theParking using the Remote con-screen of the smartphone and thentrol function and memory func-tionexecute a start operation of Remote control functionA smartphone can be used to remotelywhile standing approximately 50 cm (1.6operate the memory function if the tar-ft.) or more from the vehicle and out of thepath of the parking space can be detected7 Checking the safety of the areawhen the vehicle is stopped close to aaround the vehicle, operate theparking space which was previouslyscreen of the to the memory continuously operating the opera-Also, depending on the condition oftion area, the vehicle will move and parkingthe parking space, etc., if it is necessaryassistance will be change the direction of travel of theIf operation of the screen of the smart-vehicle, the shift position can bephone is stopped, assistance can be sus-pended and the vehicle can be by assistance the operation of the screen of the1 Stop the vehicle with it aligned nearsmartphone is resumed to move the vehi-the center of the target parkingcle, the vehicle will be locked automaticallyspace. (P.370)before moving.8 When the parking space is2 Press the Advanced Park mainreached, after the vehicle isswitch and check that a possiblestopped by the parking brake, theparking space is displayed on theshift position will be changed to P,Center Display. (P.370)the power switch will be turned off,3 Selectand then select “Perpen-and the doors will be completion screen will be displayed on4 Select “OK” the “MODE” button is displayed, the but-■ When the brakes have been operatedton can be selected t
376
4-5. Using the driving support systems
the vehicle. If there is a cone or other
■ When the brakes have been operated
obstruction in the path of the vehicle, move
P.361
it after exiting the vehicle.
6 From outside of the vehicle, con-
firm the parking space on the
Parking using the Remote con-
screen of the smartphone and then
trol function and memory func-
tion
execute a start operation.
Start operation of Remote control function
A smartphone can be used to remotely
while standing approximately 50 cm (1.6
operate the memory function if the tar-
ft.) or more from the vehicle and out of the
path of the vehicle.
get parking space can be detected
7 Checking the safety of the area
when the vehicle is stopped close to a
around the vehicle, operate the
parking space which was previously
screen of the smartphone.
registered to the memory function.
While continuously operating the opera-
Also, depending on the condition of
tion area, the vehicle will move and parking
the parking space, etc., if it is necessary
assistance will be performed.
to change the direction of travel of the
If operation of the screen of the smart-
vehicle, the shift position can be
phone is stopped, assistance can be sus-
pended and the vehicle can be stopped.
changed by assistance control.
When the operation of the screen of the
1 Stop the vehicle with it aligned near
smartphone is resumed to move the vehi-
the center of the target parking
cle, the vehicle will be locked automatically
space. (P.370)
before moving.
8 When the parking space is
2 Press the Advanced Park main
reached, after the vehicle is
switch and check that a possible
stopped by the parking brake, the
parking space is displayed on the
shift position will be changed to P,
Center Display. (P.370)
the power switch will be turned off,
3 Select
and then select “Perpen-
and the doors will be locked.
dicular/parallel”.
A completion screen will be displayed on
4 Select “OK” button.
the smartphone.
If the “MODE” button is displayed, the but-
■ When the brakes have been operated
ton can be selected to change between the
P.361
memory function, perpendicular parking
(forward/reverse) function and parallel
parking function.
Preparation before using
5 Exit the vehicle while carrying the
Remote control function
electronic key and smartphone,
and then start the dedicated app.
■ Preparation before using
The detection area of the electronic key is
Make sure to perform the following
within approximately 3 m (9.8 ft.) around
before using Remote control function:
4-5. Using the driving support systems3771 Download the dedicated app app store.2 Turn the power switch to ON andregister the smartphone as aBluetooth ® device to the details on registering a Bluetooth ®device, refer to the “MULTIMEDIAOWNER’S MANUAL”.3 Start the dedicated app and regis-4 Select thebutton displayed onter the Center Display.4 The registered vehicle will be dis-NOTICEplayed on the screen of the smart-■ Remote control functionphone. Select the vehicle.● When using Remote control function,The name and image of the vehicle can be4make sure carry an electronic key inchanged on the new vehicle registrationyour pocket, ● If an electronic key is held togetherVehicles can be added through the menuwith a smartphone, etc., the may not be able to be detected.■ Remote control function on/off● Vehicles with a digital key: Remote1 Selectand then selectcontrol function cannot be used when“Advanced Park” on the Centercarrying only a digital key. The drivershould always carry the electronic .● When entering the vehicle after using2 Select “Remote Park” to turn itRemote control function, make sureon/off. (The default setting is on.)that the electronic key is brought intothe vehicle and all of the doors are3 Press the Advanced Park with a power easy accesssystem: After entering the vehicle andIf the switch is pressed while assistance isending Remote control function oper-being performed, the assistance will beation, the seat return function willoperate when the driver’s seat belt isfastened or the brake pedal isdepressed.
4-5. Using the driving support systems
377
1 Download the dedicated app from
canceled.
the app store.
2 Turn the power switch to ON and
register the smartphone as a
Bluetooth ® device to the Center
Display.
For details on registering a Bluetooth ®
device, refer to the “MULTIMEDIA
OWNER’S MANUAL”.
3 Start the dedicated app and regis-
4 Select the
button displayed on
ter the vehicle.
the Center Display.
4 The registered vehicle will be dis-
NOTICE
played on the screen of the smart-
■ Remote control function
phone. Select the vehicle.
● When using Remote control function,
The name and image of the vehicle can be
4
make sure carry an electronic key in
changed on the new vehicle registration
your pocket, etc.
screen.
Driving
● If an electronic key is held together
Vehicles can be added through the menu
with a smartphone, etc., the electronic
screen.
key may not be able to be detected.
■ Remote control function on/off
● Vehicles with a digital key: Remote
1 Select
and then select
control function cannot be used when
“Advanced Park” on the Center
carrying only a digital key. The driver
should always carry the electronic key.
Display.
● When entering the vehicle after using
2 Select “Remote Park” to turn it
Remote control function, make sure
on/off. (The default setting is on.)
that the electronic key is brought into
the vehicle and all of the doors are
3 Press the Advanced Park main
closed.
switch.
Vehicles with a power easy access
system: After entering the vehicle and
If the switch is pressed while assistance is
ending Remote control function oper-
being performed, the assistance will be
ation, the seat return function will
operate when the driver’s seat belt is
fastened or the brake pedal is
depressed.
3784-5. Using the driving support systems• An appropriate distance from theNOTICEvehicle can be maintained and the● If the power switch is turned off whensafety of yourself and others can beRemote control function operation hasensuredfinished or been canceled, the doorswill be locked automatically. However,• Caution for the area around the vehi-if a door is open, it may not be is always maintained and there isCheck the vehicle condition afterno potential for dangerRemote control function operation has• You can cancel Remote control immediately if necessary● When the doors are locked afterRemote control function operation hasfinished or been canceled, an alarmAdvanced Park cancela-may sound if someone is detectedtion/suspensioninside the vehicle.■ Situations in which the function may■ Assistance will be canceled whennot operate correctlyIn situations such as the following,● When the functions of the smart entryAdvanced Park operation will be can-& start system may not operate cor-rectly (P.151)celed. Firmly hold the steering wheeland depress the brake pedal to stop● When the vehicle is near fluorescentthe ● Radio wave interference: P.153As system operation has been can-celed, begin the operation again or■ Electronic key battery consumptioncontinue parking manually, using the● When Remote control function issteering used, the electronic key batterywill be used as the electronic key will The Advanced Park main switch iscontinuously send and receive radiopushedwaves. The shift position has been changed● If the electronic key battery isdepleted: P.474to P The parking brake is engaged■ Situations in which the sensors maynot operate properly (P.322) A door or the back door is opened● When using Remote control function,visibility of the area around the vehicle The driver’s seat belt is unfastenedmay be limited. Make sure to check The outside rear view mirrors arethe following when using Remote con-trol functi
378
4-5. Using the driving support systems
• An appropriate distance from the
NOTICE
vehicle can be maintained and the
● If the power switch is turned off when
safety of yourself and others can be
Remote control function operation has
ensured
finished or been canceled, the doors
will be locked automatically. However,
• Caution for the area around the vehi-
if a door is open, it may not be locked.
cle is always maintained and there is
Check the vehicle condition after
no potential for danger
Remote control function operation has
• You can cancel Remote control func-
finished.
tion immediately if necessary
● When the doors are locked after
Remote control function operation has
finished or been canceled, an alarm
Advanced Park cancela-
may sound if someone is detected
tion/suspension
inside the vehicle.
■ Situations in which the function may
■ Assistance will be canceled when
not operate correctly
In situations such as the following,
● When the functions of the smart entry
Advanced Park operation will be can-
& start system may not operate cor-
rectly (P.151)
celed. Firmly hold the steering wheel
and depress the brake pedal to stop
● When the vehicle is near fluorescent
the vehicle.
lights
● Radio wave interference: P.153
As system operation has been can-
celed, begin the operation again or
■ Electronic key battery consumption
continue parking manually, using the
● When Remote control function is
steering wheel.
being used, the electronic key battery
will be used as the electronic key will
 The Advanced Park main switch is
continuously send and receive radio
pushed
waves.
 The shift position has been changed
● If the electronic key battery is
depleted: P.474
to P
 The parking brake is engaged
■ Situations in which the sensors may
not operate properly (P.322)
 A door or the back door is opened
● When using Remote control function,
visibility of the area around the vehicle
 The driver’s seat belt is unfastened
may be limited. Make sure to check
 The outside rear view mirrors are
the following when using Remote con-
trol function:
folded
• The vehicle and area around the vehi-
 The TRC or VSC is turned off
cle are clearly visible
 The TRC, VSC or ABS operates
• There are no people, animals, or
 The vehicle is towing a trailer or
objects in the path of the vehicle
another vehicle
4-5. Using the driving support systems379 The power switch is pressed■ Remote control function assis-tance (if equipped) will be can- The system determines assistanceceled whencannot be continued in the currentparking environmentIn situations such as the following,Remote control function operation will The system malfunctionsbe canceled. While the vehicle was stopped,As system operation has been can-“Cancel” was selected on the Cen-celed, while carrying an electronic key,ter Displayenter the vehicle and park the vehicle■ Assistance will be suspended whenmanually, using the steering situations such as the following, When a condition for stoppingAdvanced Park operation will be sus-Advanced Park assistance is met, the exception suspension dueAssistance can be started again by fol-to a door being opened or thelowing the directions displayed on thedriver’s seat belt being released4Center Display. When 5 minutes have elapsed sinceAlso, when assistance is suspended, ifRemote control function operationDrivingthe shift position is changed twice withwas startedthe brake pedal depressed, assistance When 3 minutes have elapsed sincewill be canceled in that shift operation was performedHowever, if assistance is suspended by When 30 seconds have elapsedchanging the shift position, assistancewith the vehicle not being able to bewill be canceled if the shift position isdriven, even though the screen ofchanged smartphone is being operated to The steering wheel is operateddrive the vehicle The accelerator pedal is depressed When the power-off operation of The shift position has been changedthe vehicle is executed on thescreen of the smartphone A moving object or stationaryobject that may collide with your When the dedicated app is forcevehicle has been detected, resultingclosedin the operation of the hybrid system When the vehicle is on a steep slopeoutput control/braking control. When an electronic key is detected Camera swi
4-5. Using the driving support systems
379
 The power switch is pressed
■ Remote control function assis-
tance (if equipped) will be can-
 The system determines assistance
celed when
cannot be continued in the current
parking environment
In situations such as the following,
Remote control function operation will
 The system malfunctions
be canceled.
 While the vehicle was stopped,
As system operation has been can-
“Cancel” was selected on the Cen-
celed, while carrying an electronic key,
ter Display
enter the vehicle and park the vehicle
■ Assistance will be suspended when
manually, using the steering wheel.
In situations such as the following,
 When a condition for stopping
Advanced Park operation will be sus-
Advanced Park assistance is met,
pended.
with the exception suspension due
Assistance can be started again by fol-
to a door being opened or the
lowing the directions displayed on the
driver’s seat belt being released
4
Center Display.
 When 5 minutes have elapsed since
Also, when assistance is suspended, if
Remote control function operation
Driving
the shift position is changed twice with
was started
the brake pedal depressed, assistance
 When 3 minutes have elapsed since
will be canceled in that shift position.
any operation was performed
However, if assistance is suspended by
 When 30 seconds have elapsed
changing the shift position, assistance
with the vehicle not being able to be
will be canceled if the shift position is
driven, even though the screen of
changed once.
the smartphone is being operated to
 The steering wheel is operated
drive the vehicle
 The accelerator pedal is depressed
 When the power-off operation of
 The shift position has been changed
the vehicle is executed on the
screen of the smartphone
 A moving object or stationary
object that may collide with your
 When the dedicated app is force
vehicle has been detected, resulting
closed
in the operation of the hybrid system
 When the vehicle is on a steep slope
output control/braking control.
 When an electronic key is detected
 Camera switch is pressed
inside the vehicle while Remote
control function operation is sus-
pended
 When the ambient temperature is -
3804-5. Using the driving support systems10°C (14°F) or less■ Remote Park (if equipped)■ Remote control function assis-Remote control function can be turnedtance (if equipped) will be sus-on/ when■ Speed profileIn situations such as the following,The vehicle speed for when assistanceassistance will be performed can be set. When the Bluetooth ® communica-This setting cannot be changed whention between the smartphone andregistering a parking space to themultimedia system get lostmemory function. When an operation on the smart-■ Obstacle detection rangephone is suspendedThe distance from which obstacles will When the dedicated app is pushedbe avoided while assistance is beingto the background (a call isperformed can be , the home button is■ Preferred parking methodpressed, etc.)The preferred parking method dis- When electronic key does notplayed when at a parking space whichdetectedperpendicular (forward/reverse) or When there is an obstruction in theparallel parking is possible can be direction of the vehicle■ Preferred parking direction When the vehicle is operated whileThe preferred parking direction dis-it is being driven by assistanceplayed when it is possible to pull per- When the electronic key is oper-pendicular forward or reverse into aated while it is being driven by assis-parking space can be ■ Preferred exit direction (perpen- When the door is unlocked while itdicular)is being driven by assistanceThe preferred exit direction displayed When a door is opened while thewhen it is possible to pull forward orvehicle is being drivenreverse to the left or right out of a park-ing space can be the Advanced Park■ Preferred exit direction (parallel)settingsThe preferred exit direction displayedwhen it is possible to exit to the left orPress the Advanced Park main switch,right from a parallel parking space canand selecton the Center Display,be then select “Advanced Park
380
4-5. Using the driving support systems
10°C (14°F) or less
■ Remote Park (if equipped)
■ Remote control function assis-
Remote control function can be turned
tance (if equipped) will be sus-
on/off.
pended when
■ Speed profile
In situations such as the following,
The vehicle speed for when assistance
assistance will be suspended.
is performed can be set.
 When the Bluetooth ® communica-
This setting cannot be changed when
tion between the smartphone and
registering a parking space to the
multimedia system get lost
memory function.
 When an operation on the smart-
■ Obstacle detection range
phone is suspended
The distance from which obstacles will
 When the dedicated app is pushed
be avoided while assistance is being
to the background (a call is
performed can be set.
received, the home button is
■ Preferred parking method
pressed, etc.)
The preferred parking method dis-
 When electronic key does not
played when at a parking space which
detected
perpendicular (forward/reverse) or
 When there is an obstruction in the
parallel parking is possible can be set.
movement direction of the vehicle
■ Preferred parking direction
 When the vehicle is operated while
The preferred parking direction dis-
it is being driven by assistance
played when it is possible to pull per-
 When the electronic key is oper-
pendicular forward or reverse into a
ated while it is being driven by assis-
parking space can be selected.
tance
■ Preferred exit direction (perpen-
 When the door is unlocked while it
dicular)
is being driven by assistance
The preferred exit direction displayed
 When a door is opened while the
when it is possible to pull forward or
vehicle is being driven
reverse to the left or right out of a park-
ing space can be selected.
Changing the Advanced Park
■ Preferred exit direction (parallel)
settings
The preferred exit direction displayed
when it is possible to exit to the left or
Press the Advanced Park main switch,
right from a parallel parking space can
and select
on the Center Display,
be selected.
and then select “Advanced Park”.
4-5. Using the driving support systems381■ Camera view when parkinghas been installed to the rear of thevehicle, the length of the rear of theThe display angle of the camera imagevehicle can be adjusted to help avoidwhen using the perpendicular parkingcolliding with objects to the rear of the(forward/reverse) function or function can be set.■ Clear registered parking space■ Camera view when exitingThe parking spaces registered to theThe display angle of the camera imagememory function can be deleted. Park-when using the perpendicular exitinging space information cannot be(forward/reverse) function or paralleldeleted when assistance is being per-parking exit function can be or when registering parking■ Parking path adjustmentspace information to the memory func-The course for when parking is operating can be adjustedNOTICEinward or outward.4● Take care when using the park posi-If the tires are worn, the path of vehicletion adjustment (forward) or park posi-may be offset from the center of thetion adjustment (reverse) for adjustingDrivingparking space. In this case, use this set-because the vehicle may collide withparking blocks, curb stones, or otherting to adjust the parking objects.■ Road width adjustment● If it is likely that your vehicle will collidewith a nearby vehicle/object, parkingWhen parking assistance is started, theblock, curb stone, etc., depress theamount of lateral movement while thebrake pedal to stop the vehicle andvehicle is moving forward can bepress the Advanced Park main switchto disable the .■ Park position adjustment (forward)Changing the dedicated app set-The position at which perpendiculartings (for Remote control func-parking (forward) is completed can betion)adjusted. (Except when using thememory function.)■ Lexus parking assist-sensor warn-ing sound ON/OFF (Smartphone■ Park position adjustment (reverse)setting)The position at which perpendicularThe warning sound
4-5. Using the driving support systems
381
■ Camera view when parking
has been installed to the rear of the
vehicle, the length of the rear of the
The display angle of the camera image
vehicle can be adjusted to help avoid
when using the perpendicular parking
colliding with objects to the rear of the
(forward/reverse) function or parallel
vehicle.
parking function can be set.
■ Clear registered parking space
■ Camera view when exiting
The parking spaces registered to the
The display angle of the camera image
memory function can be deleted. Park-
when using the perpendicular exiting
ing space information cannot be
(forward/reverse) function or parallel
deleted when assistance is being per-
parking exit function can be set.
formed or when registering parking
■ Parking path adjustment
space information to the memory func-
The course for when parking assis-
tion.
tance is operating can be adjusted
NOTICE
inward or outward.
4
● Take care when using the park posi-
If the tires are worn, the path of vehicle
tion adjustment (forward) or park posi-
may be offset from the center of the
tion adjustment (reverse) for adjusting
Driving
parking space. In this case, use this set-
because the vehicle may collide with
parking blocks, curb stones, or other
ting to adjust the parking course.
low objects.
■ Road width adjustment
● If it is likely that your vehicle will collide
with a nearby vehicle/object, parking
When parking assistance is started, the
block, curb stone, etc., depress the
amount of lateral movement while the
brake pedal to stop the vehicle and
vehicle is moving forward can be
press the Advanced Park main switch
to disable the system.
adjusted.
■ Park position adjustment (forward)
Changing the dedicated app set-
The position at which perpendicular
tings (for Remote control func-
parking (forward) is completed can be
tion)
adjusted. (Except when using the
memory function.)
■ Lexus parking assist-sensor warn-
ing sound ON/OFF (Smartphone
■ Park position adjustment (reverse)
setting)
The position at which perpendicular
The warning sounds of the Lexus park-
parking (reverse) is completed can be
ing assist-sensor from the dedicated
adjusted. (Except when using the
app can be enabled/disabled.
memory function.)
■ Rear accessory setting
If an accessory, such as a trailer hitch,
3824-5. Using the driving support systems■ Lexus parking assist-sensor warn-■ If “Obstacle detected” is displayeding sound volume adjustmentAs a moving object or stationary object thatmay collide with your vehicle has been(Smartphone setting)detected, the hybrid system output con-The volume of the warning sounds oftrol/braking control operates to suspendAdvanced Park Lexus parking assist-sensor can beCheck the condition of the surroundingadjusted from the dedicated . To resume assistance, select the“Start” button on the Center Park displayed mes-■ If “No available parking space to regis-ter” is displayedsagesThis message is displayed whenisThe operating state, assistance opera-selected at a parking space that cannot betion, etc. of the Advanced Park is on the Center Display. If aOperate the system at a parking spacemessage is displayed, respond accord-where differences in the road surface caning to the content recognized. (P.368)■ If “No available parking space” is dis-playedMove the vehicle to a location where aparking space or parking lines can bedetected.■ If “Unavailable in current condition” isdisplayedMove the vehicle to another location anduse the system.■ If “Not enough space to exit” is dis-playedThe parallel parking exit function cannot beused due to a situation such as the distancebetween your vehicle and vehicles parkedin front of and behind your vehicle beingshort, the existence of an object in the exitdirection, the conditions of the area aroundyour vehicle and exit from the parkingspace manually.■ If “Cannot control speed” is displayedThe system judged that it cannot adjust thespeed of the vehicle when using the systemin an area with a slope or step and assis-tance was the system in a level location.
382
4-5. Using the driving support systems
■ Lexus parking assist-sensor warn-
■ If “Obstacle detected” is displayed
ing sound volume adjustment
As a moving object or stationary object that
may collide with your vehicle has been
(Smartphone setting)
detected, the hybrid system output con-
The volume of the warning sounds of
trol/braking control operates to suspend
Advanced Park assistance.
the Lexus parking assist-sensor can be
Check the condition of the surrounding
adjusted from the dedicated app.
area. To resume assistance, select the
“Start” button on the Center Display.
Advanced Park displayed mes-
■ If “No available parking space to regis-
ter” is displayed
sages
This message is displayed when
is
The operating state, assistance opera-
selected at a parking space that cannot be
tion, etc. of the Advanced Park is dis-
detected.
played on the Center Display. If a
Operate the system at a parking space
message is displayed, respond accord-
where differences in the road surface can
ing to the content displayed.
be recognized. (P.368)
■ If “No available parking space” is dis-
played
Move the vehicle to a location where a
parking space or parking lines can be
detected.
■ If “Unavailable in current condition” is
displayed
Move the vehicle to another location and
use the system.
■ If “Not enough space to exit” is dis-
played
The parallel parking exit function cannot be
used due to a situation such as the distance
between your vehicle and vehicles parked
in front of and behind your vehicle being
short, the existence of an object in the exit
direction, etc.
Check the conditions of the area around
your vehicle and exit from the parking
space manually.
■ If “Cannot control speed” is displayed
The system judged that it cannot adjust the
speed of the vehicle when using the system
in an area with a slope or step and assis-
tance was canceled.
Use the system in a level location.
4-5. Using the driving support systems383GPF (Gasoline ParticulateNOTICEFilter) system *■ To prevent the GPF system from notoperating properly*● Do not use fuel other than the speci-: If equippedfied typeThe GPF system collects particu-● Do not modify the exhaust pipeslate matter in the exhaust gas byusing an exhaust gas filter. The sys-tem will operate to regenerate thefilter automatically, depending onthe vehicle conditions.■ If “Exhaust Filter Full See Owner’s Man-ual” is shown on the multi-informationdisplay● The message may be displayed while4high load driving with particulate matteraccumulating.● Hybrid system output (engine speed) isDrivingrestricted when a certain amount of par-ticulate matter accumulates, however, itis possible to drive the vehicle unless themalfunction indicator lamp comes on.● Particulate matter can accumulate morequickly if the vehicle is frequently drivenshort trips or at low speeds, or if thehybrid system is regularly started in anextremely cold environment. Excessiveaccumulation of particulate matter canbe prevented by periodically driving longdistances continuously with intermittentreleasing of the accelerator pedal, suchas when driving on highways and free-ways.■ If the malfunction indicator lamp comeson or “Hybrid system malfunction Out-put Power Reduced Visit Your Dealer”is shown on the multi-information dis-playThe amount of accumulated particulatematter has exceeded a certain level. Havethe vehicle inspected by any authorizedLexus retailer or Lexus authorized repairer,or any reliable repairer immediately.
4-5. Using the driving support systems
383
GPF (Gasoline Particulate
NOTICE
Filter) system *
■ To prevent the GPF system from not
operating properly
*
● Do not use fuel other than the speci-
: If equipped
fied type
The GPF system collects particu-
● Do not modify the exhaust pipes
late matter in the exhaust gas by
using an exhaust gas filter. The sys-
tem will operate to regenerate the
filter automatically, depending on
the vehicle conditions.
■ If “Exhaust Filter Full See Owner’s Man-
ual” is shown on the multi-information
display
● The message may be displayed while
4
high load driving with particulate matter
accumulating.
● Hybrid system output (engine speed) is
Driving
restricted when a certain amount of par-
ticulate matter accumulates, however, it
is possible to drive the vehicle unless the
malfunction indicator lamp comes on.
● Particulate matter can accumulate more
quickly if the vehicle is frequently driven
short trips or at low speeds, or if the
hybrid system is regularly started in an
extremely cold environment. Excessive
accumulation of particulate matter can
be prevented by periodically driving long
distances continuously with intermittent
releasing of the accelerator pedal, such
as when driving on highways and free-
ways.
■ If the malfunction indicator lamp comes
on or “Hybrid system malfunction Out-
put Power Reduced Visit Your Dealer”
is shown on the multi-information dis-
play
The amount of accumulated particulate
matter has exceeded a certain level. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
3844-5. Using the driving support systemsHelps to maintain directional stabilityDriving assist systemswhen swerving on slippery road sur-faces by controlling steering perfor-To keep driving safety and , the following systems oper-■ Trailer Sway Control (vehicles withate automatically in response totowing package)various driving situations. Beaware, however, that these systemsHelps the driver to control trailer swayare supplementary and should notby selectively applying brake pressurebe relied upon too heavily whenfor individual wheels and reducingoperating the torque when trailer sway of the driving assist■ TRC (Traction Control)systemsHelps to maintain drive power andprevent the drive wheels from spinning■ ECB (Electronically Controlledwhen starting the vehicle or accelerat-Brake System)ing on slippery roadsThe electronically controlled system■ Active Cornering Assist (ACA)generates braking force correspond-Helps to prevent the vehicle from drift-ing to the brake operationing to the outer side by performing■ ABS (Anti-lock Brake System)inner wheel brake control whenHelps to prevent wheel lock when theattempting to accelerate during cor-brakes are applied suddenly, or if theneringbrakes are applied while driving on a■ Hill-start assist controlslippery road surfaceHelps to reduce the backward move-■ Brake assistment of the vehicle when starting on anGenerates an increased level of brak-uphilling force after the brake pedal is■ EPS (Electric Power Steering)depressed when the system detects aEmploys an electric motor to reducepanic stop situationthe amount of effort needed to turn the■ VSC (Vehicle Stability Control)steering wheelHelps the driver to control skidding■ E-Four (Electronic On-Demandwhen swerving suddenly or turning onAWD system) (AWD models)slippery road surfacesAutomatically controls the drive sys-■ VSC + (Vehicle Stability Control +)tem such as to front-wheel drive orProvides cooperative control of the
384
4-5. Using the driving support systems
Helps to maintain directional stability
Driving assist systems
when swerving on slippery road sur-
faces by controlling steering perfor-
To keep driving safety and perfor-
mance.
mance, the following systems oper-
■ Trailer Sway Control (vehicles with
ate automatically in response to
towing package)
various driving situations. Be
aware, however, that these systems
Helps the driver to control trailer sway
are supplementary and should not
by selectively applying brake pressure
be relied upon too heavily when
for individual wheels and reducing
operating the vehicle.
driving torque when trailer sway is
detected.
Summary of the driving assist
■ TRC (Traction Control)
systems
Helps to maintain drive power and
prevent the drive wheels from spinning
■ ECB (Electronically Controlled
when starting the vehicle or accelerat-
Brake System)
ing on slippery roads
The electronically controlled system
■ Active Cornering Assist (ACA)
generates braking force correspond-
Helps to prevent the vehicle from drift-
ing to the brake operation
ing to the outer side by performing
■ ABS (Anti-lock Brake System)
inner wheel brake control when
Helps to prevent wheel lock when the
attempting to accelerate during cor-
brakes are applied suddenly, or if the
nering
brakes are applied while driving on a
■ Hill-start assist control
slippery road surface
Helps to reduce the backward move-
■ Brake assist
ment of the vehicle when starting on an
Generates an increased level of brak-
uphill
ing force after the brake pedal is
■ EPS (Electric Power Steering)
depressed when the system detects a
Employs an electric motor to reduce
panic stop situation
the amount of effort needed to turn the
■ VSC (Vehicle Stability Control)
steering wheel
Helps the driver to control skidding
■ E-Four (Electronic On-Demand
when swerving suddenly or turning on
AWD system) (AWD models)
slippery road surfaces
Automatically controls the drive sys-
■ VSC + (Vehicle Stability Control +)
tem such as to front-wheel drive or
Provides cooperative control of the
AWD (all wheel drive) according to
ABS, TRC, VSC and EPS.
4-5. Using the driving support systems385various running conditions includingand release driving, during cornering, on aThe “Traction Control Turned OFF” will beuphill, when starting off, during accel-shown on the multi-information , on a slippery roads due toPress theswitch again to turn the sys-snow or rain, thus contributing to sta-tem back operability and driving stability.■ Emergency brake signalWhen the brakes are applied suddenly,the stop lights automatically flash toalert the vehicle behind.■ The Secondary Collision BrakeWhen the airbag sensor detects a colli-■ Turning off both TRC, VSC and Trailersion, the brakes and brake lights areSway Control (vehicles with towingautomatically controlled to reduce thepackage) systems4vehicle speed and that helps reduceTo turn the TRC, VSC and Trailer Swaythe possibility of further damage due toControl systems off, press and hold thea secondary for more than 3 seconds while thevehicle is stopped.■ When the TRC/VSC/ABS/TrailerThe VSC OFF indicator light will come onSway Control (vehicles with towingand the “Traction Control Turned OFF” willpackage) systems are operatingbe shown on the multi-information display. *The slip indicator light will flash while theTRC/VSC/ABS/Trailer Sway Control sys-Press theswitch again to turn the sys-tems are back on.*: PCS (Pre-Collision System) will also bedisabled (only Pre-Collision warning isavailable). The PCS warning light willcome on and a message will be displayedon the multi-information display.(P.246)■ When the message is displayed on the■ Disabling the TRC systemmulti-information display showing thatIf the vehicle gets stuck in mud, dirt or snow,TRC has been disabled even if thethe TRC system may reduce power fromswitch has not been pressedthe hybrid system to the wheels. PressingTRC is temporary deactivated. If the infor-theswitch to turn the system off maymation continues to show, contact anymake it ea
4-5. Using the driving support systems
385
various running conditions including
and release the
switch.
normal driving, during cornering, on a
The “Traction Control Turned OFF” will be
uphill, when starting off, during accel-
shown on the multi-information display.
eration, on a slippery roads due to
Press the
switch again to turn the sys-
snow or rain, thus contributing to sta-
tem back on.
ble operability and driving stability.
■ Emergency brake signal
When the brakes are applied suddenly,
the stop lights automatically flash to
alert the vehicle behind.
■ The Secondary Collision Brake
When the airbag sensor detects a colli-
■ Turning off both TRC, VSC and Trailer
sion, the brakes and brake lights are
Sway Control (vehicles with towing
automatically controlled to reduce the
package) systems
4
vehicle speed and that helps reduce
To turn the TRC, VSC and Trailer Sway
the possibility of further damage due to
Control systems off, press and hold the
a secondary collision.
Driving
switch for more than 3 seconds while the
vehicle is stopped.
■ When the TRC/VSC/ABS/Trailer
The VSC OFF indicator light will come on
Sway Control (vehicles with towing
and the “Traction Control Turned OFF” will
package) systems are operating
be shown on the multi-information display. *
The slip indicator light will flash while the
TRC/VSC/ABS/Trailer Sway Control sys-
Press the
switch again to turn the sys-
tems are operating.
tems back on.
*
: PCS (Pre-Collision System) will also be
disabled (only Pre-Collision warning is
available). The PCS warning light will
come on and a message will be displayed
on the multi-information display.
(P.246)
■ When the message is displayed on the
■ Disabling the TRC system
multi-information display showing that
If the vehicle gets stuck in mud, dirt or snow,
TRC has been disabled even if the
the TRC system may reduce power from
switch has not been pressed
the hybrid system to the wheels. Pressing
TRC is temporary deactivated. If the infor-
the
switch to turn the system off may
mation continues to show, contact any
make it easier for you to rock the vehicle in
authorized Lexus retailer or Lexus autho-
order to free it.
rized repairer, or any reliable repairer.
To turn the TRC system off, quickly press
3864-5. Using the driving support systems■ Operating conditions of hill-start assista malfunction has ● Operating sound heard from the engineWhen all of the following conditions arecompartment when the brake pedal ismet, the hill-start assist control will operate:operated.● The shift lever is in a position other than P● Motor sound of the brake system heardor N (when starting off forward/back-from the front part of the vehicle whenward on an upward incline)the driver’s door is opened.● The vehicle is stopped● Operating sound heard from the enginecompartment when one or two minutes● The accelerator pedal is not depressedpassed after the stop of the hybrid sys-● The parking brake is not engagedtem.● The power switch is in ON■ Active Cornering Assist operationsounds and vibrations■ Automatic system cancelation of hill-start assist controlWhen Active Cornering Assist is operated,operation sounds and vibrations may beThe hill-start assist control will turn off in anygenerated from the brake system, but this isof the following situations:not a malfunction.● The shift lever is shifted to P or N■ Automatic reactivation of TRC, Trailer● The accelerator pedal is depressedSway Control (vehicles with towing● The brake pedal is depressed and thepackage) and VSC systemsparking brake is engagedAfter turning the TRC, Trailer Sway Con-● A maximum of 2 seconds have elapsedtrol and VSC systems off, the systems willafter the brake pedal is releasedbe automatically re-enabled in the followingsituations:● The power switch is turned to OFF.● When the power switch is turned off■ Sounds and vibrations caused by theABS, brake assist, VSC, TRC, Trailer● If only the TRC system is turned off, theSway Control (vehicles with towingTRC will turn on when vehicle speedpackage) and hill-start assist controlincreases. If both the TRC and VSC sys-systemstems are turned off, automatic re-enabling will not occur when vehicle● A sound may be heard from the enginespeed
386
4-5. Using the driving support systems
■ Operating conditions of hill-start assist
a malfunction has occurred.
control
● Operating sound heard from the engine
When all of the following conditions are
compartment when the brake pedal is
met, the hill-start assist control will operate:
operated.
● The shift lever is in a position other than P
● Motor sound of the brake system heard
or N (when starting off forward/back-
from the front part of the vehicle when
ward on an upward incline)
the driver’s door is opened.
● The vehicle is stopped
● Operating sound heard from the engine
compartment when one or two minutes
● The accelerator pedal is not depressed
passed after the stop of the hybrid sys-
● The parking brake is not engaged
tem.
● The power switch is in ON
■ Active Cornering Assist operation
sounds and vibrations
■ Automatic system cancelation of hill-
start assist control
When Active Cornering Assist is operated,
operation sounds and vibrations may be
The hill-start assist control will turn off in any
generated from the brake system, but this is
of the following situations:
not a malfunction.
● The shift lever is shifted to P or N
■ Automatic reactivation of TRC, Trailer
● The accelerator pedal is depressed
Sway Control (vehicles with towing
● The brake pedal is depressed and the
package) and VSC systems
parking brake is engaged
After turning the TRC, Trailer Sway Con-
● A maximum of 2 seconds have elapsed
trol and VSC systems off, the systems will
after the brake pedal is released
be automatically re-enabled in the following
situations:
● The power switch is turned to OFF.
● When the power switch is turned off
■ Sounds and vibrations caused by the
ABS, brake assist, VSC, TRC, Trailer
● If only the TRC system is turned off, the
Sway Control (vehicles with towing
TRC will turn on when vehicle speed
package) and hill-start assist control
increases. If both the TRC and VSC sys-
systems
tems are turned off, automatic re-
enabling will not occur when vehicle
● A sound may be heard from the engine
speed increases.
compartment when the brake pedal is
depressed repeatedly, when the hybrid
■ Operating conditions of Active Corner-
system is started or just after the vehicle
ing Assist
begins to move. This sound does not indi-
The system operates when the following
cate that a malfunction has occurred in
occurs.
any of these systems.
● TRC/VSC can operate
● Any of the following conditions may
● The driver is attempting to accelerate
occur when the above systems are oper-
while turning
ating. None of these indicates that a mal-
function has occurred.
● The system detects that the vehicle is
• Vibrations may be felt through the vehi-
drifting to the outer side
cle body and steering.
● The brake pedal is released
• A motor sound may be heard also after
the vehicle comes to a stop.
■ Reduced effectiveness of the EPS sys-
tem
■ ECB operating sound
The effectiveness of the EPS system is
ECB operating sound may be heard in the
reduced to prevent the system from over-
following cases, but it does not indicate that
4-5. Using the driving support systems387heating when there is frequent steering■ If a message about AWD is shown oninput over an extended period of time. Thethe multi-information display (AWDsteering wheel may feel heavy as a )Should this occur, refrain from excessivePerform the following input or stop the vehicle and turn● “AWD System Over-heated Switchingthe hybrid system off. The EPS systemto 2WD Mode”should return to normal within 10 system is overheated. Stop the vehi-■ Operating conditions of emergencycle in a safe place with the hybrid systembrake signaloperating. *When the following conditions are met, theemergency brake signal will operate:If the message disappears after a while,● The emergency flashers are offthere is no problem. If the message remains,● Actual vehicle speed is over 55 km/hhave the vehicle inspected by any autho-(35 mph)rized Lexus retailer or Lexus authorized● The system judges from the vehiclerepairer, or any reliable repairer immedi-deceleration that it is a sudden ● “AWD System Over-heated 2WD■ Automatic system cancelation of emer-Mode Engaged”4gency brake signalAWD system has been temporarilyThe emergency brake signal will be can-released and switched to front-wheel driveceled in any of the following situations:Drivingdue to overheating. Stop the vehicle in a● The emergency flashers are turned onsafe place with the hybrid system operat-● The system judges from the vehicleing. *deceleration that is not a sudden brakingoperationIf the message disappears after a while,■ Secondary Collision Brake operatingAWD system will automatically recover. Ifconditionsthe message remains, have the vehicleThe system operates when the SRS airbaginspected by any authorized Lexus retailersensor detects a collision while the vehicleor Lexus authorized repairer, or any reli-is in motion. However, the system does notable repairer when the components are dam-aged.● “AWD Syste
4-5. Using the driving support systems
387
heating when there is frequent steering
■ If a message about AWD is shown on
input over an extended period of time. The
the multi-information display (AWD
steering wheel may feel heavy as a result.
models)
Should this occur, refrain from excessive
Perform the following actions.
steering input or stop the vehicle and turn
● “AWD System Over-heated Switching
the hybrid system off. The EPS system
to 2WD Mode”
should return to normal within 10 minutes.
AWD system is overheated. Stop the vehi-
■ Operating conditions of emergency
cle in a safe place with the hybrid system
brake signal
operating. *
When the following conditions are met, the
emergency brake signal will operate:
If the message disappears after a while,
● The emergency flashers are off
there is no problem. If the message remains,
● Actual vehicle speed is over 55 km/h
have the vehicle inspected by any autho-
(35 mph)
rized Lexus retailer or Lexus authorized
● The system judges from the vehicle
repairer, or any reliable repairer immedi-
deceleration that it is a sudden braking
ately.
operation
● “AWD System Over-heated 2WD
■ Automatic system cancelation of emer-
Mode Engaged”
4
gency brake signal
AWD system has been temporarily
The emergency brake signal will be can-
released and switched to front-wheel drive
celed in any of the following situations:
Driving
due to overheating. Stop the vehicle in a
● The emergency flashers are turned on
safe place with the hybrid system operat-
● The system judges from the vehicle
ing. *
deceleration that is not a sudden braking
operation
If the message disappears after a while,
■ Secondary Collision Brake operating
AWD system will automatically recover. If
conditions
the message remains, have the vehicle
The system operates when the SRS airbag
inspected by any authorized Lexus retailer
sensor detects a collision while the vehicle
or Lexus authorized repairer, or any reli-
is in motion. However, the system does not
able repairer immediately.
operate when the components are dam-
aged.
● “AWD System Malfunction 2WD Mode
Engaged Visit Your Dealer”
■ Secondary Collision Brake automatic
A malfunction occurs in the AWD system.
cancellation
Have the vehicle inspected by any autho-
The system is automatically canceled in any
rized Lexus retailer or Lexus authorized
of the following situations.
repairer, or any reliable repairer immedi-
● The vehicle speed drops to approxi-
ately.
mately 0 km/h (0 mph).
* : When stopping the vehicle, do not stop
● A certain amount of time elapses during
operation
the hybrid system until the display mes-
● The accelerator pedal is depressed a
sage has turned off.
large amount
3884-5. Using the driving support systems● When Active Cornering Assist fre-WARNINGquently operates, Active Cornering■ The ABS does not operate effectivelyAssist may temporarily stop operatingwhento ensure proper operation of thebrakes, TRC, VSC.● The limits of tire gripping performancehave been exceeded (such as exces-■ Hill-start assist control does not oper-sively worn tires on a snow coveredate effectively whenroad).● Do not overly rely on hill-start assist● The vehicle hydroplanes while drivingcontrol. Hill-start assist control mayat high speed on wet or slick operate effectively on steepinclines and roads covered with ice.■ Stopping distance when the ABS isoperating may exceed that of normal● Unlike the parking brake, hill-startconditionsassist control is not intended to holdthe vehicle stationary for an extendedThe ABS is not designed to shorten theperiod of time. Do not attempt to usevehicle’s stopping distance. Alwayshill-start assist control to hold the vehi-maintain a safe distance from the vehiclecle on an incline, as doing so may leadin front of you, especially in the followingto an :● When driving on dirt, gravel or snow-■ When the TRC/VSC/ABS/Trailercovered roadsSway Control (vehicles with towingpackage) is activated● When driving with tire chainsThe slip indicator light flashes. Always● When driving over bumps in the roaddrive carefully. Reckless driving maycause an accident. Exercise particular● When driving over roads with pot-care when the indicator light or uneven surfaces■ When the TRC/VSC/Trailer Sway■ TRC/VSC may not operate effec-Control (vehicles with towing pack-tively whenage) systems are turned offDirectional control and power may notBe especially careful and drive at abe achievable while driving on slipperyspeed appropriate to the road condi-road surfaces, even if the TRC/VSC sys-tions. As these are the systems to helptem is vehicle stability and driving force,Drive the vehicle
388
4-5. Using the driving support systems
● When Active Cornering Assist fre-
WARNING
quently operates, Active Cornering
■ The ABS does not operate effectively
Assist may temporarily stop operating
when
to ensure proper operation of the
brakes, TRC, VSC.
● The limits of tire gripping performance
have been exceeded (such as exces-
■ Hill-start assist control does not oper-
sively worn tires on a snow covered
ate effectively when
road).
● Do not overly rely on hill-start assist
● The vehicle hydroplanes while driving
control. Hill-start assist control may
at high speed on wet or slick roads.
not operate effectively on steep
inclines and roads covered with ice.
■ Stopping distance when the ABS is
operating may exceed that of normal
● Unlike the parking brake, hill-start
conditions
assist control is not intended to hold
the vehicle stationary for an extended
The ABS is not designed to shorten the
period of time. Do not attempt to use
vehicle’s stopping distance. Always
hill-start assist control to hold the vehi-
maintain a safe distance from the vehicle
cle on an incline, as doing so may lead
in front of you, especially in the following
to an accident.
situations:
● When driving on dirt, gravel or snow-
■ When the TRC/VSC/ABS/Trailer
covered roads
Sway Control (vehicles with towing
package) is activated
● When driving with tire chains
The slip indicator light flashes. Always
● When driving over bumps in the road
drive carefully. Reckless driving may
cause an accident. Exercise particular
● When driving over roads with pot-
care when the indicator light flashes.
holes or uneven surfaces
■ When the TRC/VSC/Trailer Sway
■ TRC/VSC may not operate effec-
Control (vehicles with towing pack-
tively when
age) systems are turned off
Directional control and power may not
Be especially careful and drive at a
be achievable while driving on slippery
speed appropriate to the road condi-
road surfaces, even if the TRC/VSC sys-
tions. As these are the systems to help
tem is operating.
ensure vehicle stability and driving force,
Drive the vehicle carefully in conditions
do not turn the TRC/VSC/Trailer Sway
where stability and power may be lost.
Control systems off unless necessary.
Trailer Sway Control is part of the VSC
■ Active Cornering Assist does not
system and will not operate if VSC is
operate effectively when
turned off or experiences a malfunction.
● Do not overly rely on Active Corner-
ing Assist. Active Cornering Assist
may not operate effectively when
accelerating down slopes or driving on
slippery road surfaces.
4-5. Using the driving support systems389● Begin releasing the accelerator pedalWARNINGimmediately but very gradually to■ Replacing tiresreduce speed. Do not increase not apply vehicle sure that all tires are of the speci-fied size, brand, tread pattern and totalIf you make no extreme correction withload capacity. In addition, make sure thatthe steering or brakes, your vehicle andthe tires are inflated to the recom-trailer should stabilize. (P.184)mended tire inflation pressure ABS, TRC, Trailer Sway Control■ Secondary Collision Brake(vehicles with towing package) and VSCDo not rely solely upon the Secondarysystems will not function correctly if dif-Collision Brake. This system is designedferent tires are installed on the help reduce the possibility of furtherContact any authorized Lexus retailer ordamage due to a secondary collision,Lexus authorized repairer, or any reli-however, that effect changes accordingable repairer for further informationto various conditions. Overly relying onwhen replacing tires or system may result in death or serious■ Handling of tires and the tires with any kind of problem ormodifying the suspension will affect the4driving assist systems, and may cause asystem to ■ Trailer Sway Control precaution(vehicles with towing package)The Trailer Sway Control system is notable to reduce trailer sway in all situa-tions. Depending on many factors suchas the conditions of the vehicle, trailer,road surface and driving environment,the Trailer Sway Control system may notbe effective. Refer to your trailer owner’smanual for information on how to towyour trailer properly.■ If trailer sway occurs (vehicles withtowing package)Observe the following precautions. Fail-ing to do so may cause death or seriousinjury.● Firmly grip the steering wheel. Steerstraight ahead. Do not try to controltrailer swaying by turning the steeringwheel.
4-5. Using the driving support systems
389
● Begin releasing the accelerator pedal
WARNING
immediately but very gradually to
■ Replacing tires
reduce speed. Do not increase speed.
Do not apply vehicle brakes.
Make sure that all tires are of the speci-
fied size, brand, tread pattern and total
If you make no extreme correction with
load capacity. In addition, make sure that
the steering or brakes, your vehicle and
the tires are inflated to the recom-
trailer should stabilize. (P.184)
mended tire inflation pressure level.
The ABS, TRC, Trailer Sway Control
■ Secondary Collision Brake
(vehicles with towing package) and VSC
Do not rely solely upon the Secondary
systems will not function correctly if dif-
Collision Brake. This system is designed
ferent tires are installed on the vehicle.
to help reduce the possibility of further
Contact any authorized Lexus retailer or
damage due to a secondary collision,
Lexus authorized repairer, or any reli-
however, that effect changes according
able repairer for further information
to various conditions. Overly relying on
when replacing tires or wheels.
the system may result in death or serious
■ Handling of tires and the suspension
injury.
Using tires with any kind of problem or
modifying the suspension will affect the
4
driving assist systems, and may cause a
system to malfunction.
Driving
■ Trailer Sway Control precaution
(vehicles with towing package)
The Trailer Sway Control system is not
able to reduce trailer sway in all situa-
tions. Depending on many factors such
as the conditions of the vehicle, trailer,
road surface and driving environment,
the Trailer Sway Control system may not
be effective. Refer to your trailer owner’s
manual for information on how to tow
your trailer properly.
■ If trailer sway occurs (vehicles with
towing package)
Observe the following precautions. Fail-
ing to do so may cause death or serious
injury.
● Firmly grip the steering wheel. Steer
straight ahead. Do not try to control
trailer swaying by turning the steering
wheel.
3904-6. Driving tipsHybrid Electric Vehicle driv-Accelerator pedal/brake pedaling tipsoperation Drive your vehicle smoothly. AvoidFor economical and ecologicalabrupt acceleration and decelera-driving, pay attention to the follow-tion. Gradual acceleration anding points:deceleration will make more effec-tive use of the electric motor (trac-Using Eco drive modetion motor) without having to usegasoline engine using Eco drive mode, the Avoid repeated corresponding to the accelera-Repeated acceleration consumestor pedal depression amount can behybrid battery (traction battery)generated more smoothly than it is inpower, resulting in poor fuel con-normal conditions. In addition, thesumption. Battery power can beoperation of the air conditioning sys-restored by driving with the acceler-tem (heating/cooling) will be mini-ator pedal slightly , improving the fuel economy.(P.202)When brakingUse of Hybrid System IndicatorMake sure to operate the brakes gen-tly and in a timely manner. A greaterThe Eco-friendly driving is possible byamount of electrical energy can bekeeping the indicator of Hybrid Systemregenerated when slowing within Eco area. (P.100,106)DelaysChanging the shift positionRepeated acceleration and decelera-tion, as well as long waits at trafficShift the shift position to D whenlights, will lead to bad fuel at a traffic light, or driving inCheck traffic reports before leavingheavy traffic etc. Shift the shift positionand avoid delays as much as P when parking. When using the N,When driving in a traffic jam, gentlythere is no positive effect on fuel con-release the brake pedal to allow thesumption. In the N, the gasoline enginevehicle to move forward slightly whileoperates but electricity cannot be gen-avoiding overuse of the acceleratorerated. Also, when using the air condi-pedal. Doing so can help controltioning system, etc., the hybrid batteryexcessive gasol
390
4-6. Driving tips
4-6.Driving tips
Hybrid Electric Vehicle driv-
Accelerator pedal/brake pedal
ing tips
operation
 Drive your vehicle smoothly. Avoid
For economical and ecological
abrupt acceleration and decelera-
driving, pay attention to the follow-
tion. Gradual acceleration and
ing points:
deceleration will make more effec-
tive use of the electric motor (trac-
Using Eco drive mode
tion motor) without having to use
gasoline engine power.
When using Eco drive mode, the
 Avoid repeated acceleration.
torque corresponding to the accelera-
Repeated acceleration consumes
tor pedal depression amount can be
hybrid battery (traction battery)
generated more smoothly than it is in
power, resulting in poor fuel con-
normal conditions. In addition, the
sumption. Battery power can be
operation of the air conditioning sys-
restored by driving with the acceler-
tem (heating/cooling) will be mini-
ator pedal slightly released.
mized, improving the fuel economy.
(P.202)
When braking
Use of Hybrid System Indicator
Make sure to operate the brakes gen-
tly and in a timely manner. A greater
The Eco-friendly driving is possible by
amount of electrical energy can be
keeping the indicator of Hybrid System
regenerated when slowing down.
Indicator within Eco area. (P.100,
106)
Delays
Changing the shift position
Repeated acceleration and decelera-
tion, as well as long waits at traffic
Shift the shift position to D when
lights, will lead to bad fuel economy.
stopped at a traffic light, or driving in
Check traffic reports before leaving
heavy traffic etc. Shift the shift position
and avoid delays as much as possible.
to P when parking. When using the N,
When driving in a traffic jam, gently
there is no positive effect on fuel con-
release the brake pedal to allow the
sumption. In the N, the gasoline engine
vehicle to move forward slightly while
operates but electricity cannot be gen-
avoiding overuse of the accelerator
erated. Also, when using the air condi-
pedal. Doing so can help control
tioning system, etc., the hybrid battery
excessive gasoline consumption.
(traction battery) power is consumed.
4-6. Driving tips391Highway drivingLuggageControl and maintain the vehicle at aCarrying heavy luggage will lead toconstant speed. Before stopping at apoor fuel economy. Avoid carryingtoll booth or similar, allow plenty ofunnecessary luggage. Installing a largetime to release the accelerator androof rack will also cause poor fuelgently apply the brakes. A of electrical energy can beregenerated when slowing up before drivingSince the gasoline engine starts up andAir conditioningcuts out automatically when cold,Use the air conditioning only whenwarming up the engine is . Doing so can help reduceMoreover, frequently driving short dis-excessive gasoline will cause the engine to repeat-In summer: When the ambient tem-edly warm up, which can lead to excess4perature is high, use the recirculatedfuel mode. Doing so will help to reduceDrivingthe burden on the air conditioning sys-tem and reduce fuel consumption winter: Because the gasoline enginewill not automatically cut out until it andthe interior of the vehicle are warm, itwill consume fuel. Also, fuel consump-tion can be improved by avoidingoveruse of the tire inflation pressureMake sure to check the tire inflationpressure frequently. Improper tireinflation pressure can cause poor , as snow tires can cause largeamounts of friction, their use on dryroads can lead to poor fuel tires that are appropriate for theseason.
4-6. Driving tips
391
Highway driving
Luggage
Control and maintain the vehicle at a
Carrying heavy luggage will lead to
constant speed. Before stopping at a
poor fuel economy. Avoid carrying
toll booth or similar, allow plenty of
unnecessary luggage. Installing a large
time to release the accelerator and
roof rack will also cause poor fuel
gently apply the brakes. A greater
economy.
amount of electrical energy can be
regenerated when slowing down.
Warming up before driving
Since the gasoline engine starts up and
Air conditioning
cuts out automatically when cold,
Use the air conditioning only when
warming up the engine is unnecessary.
necessary. Doing so can help reduce
Moreover, frequently driving short dis-
excessive gasoline consumption.
tances will cause the engine to repeat-
In summer: When the ambient tem-
edly warm up, which can lead to excess
4
perature is high, use the recirculated
fuel consumption.
air mode. Doing so will help to reduce
Driving
the burden on the air conditioning sys-
tem and reduce fuel consumption as
well.
In winter: Because the gasoline engine
will not automatically cut out until it and
the interior of the vehicle are warm, it
will consume fuel. Also, fuel consump-
tion can be improved by avoiding
overuse of the heater.
Checking tire inflation pressure
Make sure to check the tire inflation
pressure frequently. Improper tire
inflation pressure can cause poor fuel
economy.
Also, as snow tires can cause large
amounts of friction, their use on dry
roads can lead to poor fuel economy.
Use tires that are appropriate for the
season.
3924-6. Driving tipsWinter driving tips● Do not drive at speeds in excess of thespeed limit or the speed limit specifiedfor the snow tires being out the necessary prepara-● Use snow tires on all, not just sometions and inspections before vehicle in winter. Always drive■ Driving with tire chains (vehicles withthe vehicle in a manner appropriate215/60R17 tires)to the prevailing weather condi-Observe the following precautions the risk of to do so may result in the vehiclebeing unable to be driven safely, and mayPreparation for wintercause death or serious injury.● Do not drive in excess of the speed Use fluids that are appropriate tolimit specified for the tire chains beingused, or 50 km/h (30 mph), which-the prevailing outside is lower.• Engine oil● Avoid driving on bumpy road surfaces• Engine/power control unit coolantor over potholes.• Washer fluid● Avoid sudden acceleration, abrupt Have a service technician inspectsteering, sudden braking and shiftingoperations that cause sudden enginethe condition of the 12-volt . Have the vehicle fitted with four● Slow down sufficiently before enteringsnow tires or purchase a set of tirea curve to ensure that vehicle controlis maintained.*chains for the front that all tires are the same● Do not use LTA (Lane Tracing Assist).size and brand, and that chainsmatch the size of the *: Tire chains cannot be mounted on vehi-■ Repairing or replacing snow tirescles with 225/60R17 tires orRequest repairs or replacement of snow225/55R18 from any authorized Lexus retaileror Lexus authorized repairer, or any reli-WARNINGable repairer or legitimate tire is because the removal and attach-■ Driving with snow tiresment of snow tires affects the operationObserve the following precautions toof the tire pressure warning valves andreduce the risk of to do so may result in a
392
4-6. Driving tips
Winter driving tips
● Do not drive at speeds in excess of the
speed limit or the speed limit specified
for the snow tires being used.
Carry out the necessary prepara-
● Use snow tires on all, not just some
tions and inspections before driving
wheels.
the vehicle in winter. Always drive
■ Driving with tire chains (vehicles with
the vehicle in a manner appropriate
215/60R17 tires)
to the prevailing weather condi-
Observe the following precautions to
tions.
reduce the risk of accidents.
Failure to do so may result in the vehicle
being unable to be driven safely, and may
Preparation for winter
cause death or serious injury.
● Do not drive in excess of the speed
 Use fluids that are appropriate to
limit specified for the tire chains being
used, or 50 km/h (30 mph), which-
the prevailing outside temperatures.
ever is lower.
• Engine oil
● Avoid driving on bumpy road surfaces
• Engine/power control unit coolant
or over potholes.
• Washer fluid
● Avoid sudden acceleration, abrupt
 Have a service technician inspect
steering, sudden braking and shifting
operations that cause sudden engine
the condition of the 12-volt battery.
braking.
 Have the vehicle fitted with four
● Slow down sufficiently before entering
snow tires or purchase a set of tire
a curve to ensure that vehicle control
is maintained.
*
chains for the front tires.
Ensure that all tires are the same
● Do not use LTA (Lane Tracing Assist).
size and brand, and that chains
match the size of the tires.
NOTICE
*
: Tire chains cannot be mounted on vehi-
■ Repairing or replacing snow tires
cles with 225/60R17 tires or
Request repairs or replacement of snow
225/55R18 tires.
tires from any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
WARNING
able repairer or legitimate tire retailers.
This is because the removal and attach-
■ Driving with snow tires
ment of snow tires affects the operation
Observe the following precautions to
of the tire pressure warning valves and
reduce the risk of accidents.
transmitters.
Failure to do so may result in a loss of
vehicle control and cause death or seri-
ous injury.
Before driving the vehicle
● Use tires of the specified size.
Perform the following according to the
● Maintain the recommended level of air
driving conditions:
pressure.
4-6. Driving tips393 Do not try to forcibly open a windowFailure to do so may be dangerousor move a wiper that is frozen. Pourbecause it may cause the vehicle towarm water over the frozen area tomove unexpectedly, possibly lead-melt the ice. Wipe away the watering to an to prevent it from When the parking brake is in mode, release the parking To ensure proper operation of thebrake after shifting the shift positionclimate control system fan, removeto P. (P.205)any snow that has accumulated on If the vehicle is left parked with thethe air inlet vents in front of thebrakes damp in cold temperatures, is a possibility of the brakes Check for and remove any or snow that may have accumu- If the vehicle is parked without set-lated on the exterior lights, outsideting the parking brake, confirm thatrear view mirrors, windows, vehi-the shift position cannot be moved4cle’s roof, chassis, around the tiresout of on the  Remove any snow or mud from the■ When parking the vehiclebottom of your shoes before gettingin the parking the vehicle without apply-ing the parking brake, make sure tochock the wheels. If you do not chock theWhen driving the vehiclewheels, the vehicle may move unexpect-edly, possibly resulting in an the vehicle slowly, keep asafe distance between you and theSelecting tire chainsvehicle ahead, and drive at a reduced Vehicles with 215/60R17 tiresspeed suitable to road the correct tire chain size whenmounting the tire chains. Chain size isWhen parking the vehicleregulated for each tire size. Park the vehicle and shift the shiftposition to P without setting theparking brake. The parking brakemay freeze up, preventing it frombeing released. If the vehicle isparked without setting the parkingbrake, make sure to block thewheels.
4-6. Driving tips
393
 Do not try to forcibly open a window
Failure to do so may be dangerous
or move a wiper that is frozen. Pour
because it may cause the vehicle to
warm water over the frozen area to
move unexpectedly, possibly lead-
melt the ice. Wipe away the water
ing to an accident.
immediately to prevent it from
 When the parking brake is in auto-
freezing.
matic mode, release the parking
 To ensure proper operation of the
brake after shifting the shift position
climate control system fan, remove
to P. (P.205)
any snow that has accumulated on
 If the vehicle is left parked with the
the air inlet vents in front of the
brakes damp in cold temperatures,
windshield.
there is a possibility of the brakes
 Check for and remove any excess
freezing.
ice or snow that may have accumu-
 If the vehicle is parked without set-
lated on the exterior lights, outside
ting the parking brake, confirm that
rear view mirrors, windows, vehi-
the shift position cannot be moved
4
cle’s roof, chassis, around the tires
out of P.
or on the brakes.
Driving
WARNING
 Remove any snow or mud from the
■ When parking the vehicle
bottom of your shoes before getting
in the vehicle.
When parking the vehicle without apply-
ing the parking brake, make sure to
chock the wheels. If you do not chock the
When driving the vehicle
wheels, the vehicle may move unexpect-
edly, possibly resulting in an accident.
Accelerate the vehicle slowly, keep a
safe distance between you and the
Selecting tire chains
vehicle ahead, and drive at a reduced
 Vehicles with 215/60R17 tires
speed suitable to road conditions.
Use the correct tire chain size when
mounting the tire chains. Chain size is
When parking the vehicle
regulated for each tire size.
 Park the vehicle and shift the shift
position to P without setting the
parking brake. The parking brake
may freeze up, preventing it from
being released. If the vehicle is
parked without setting the parking
brake, make sure to block the
wheels.
3944-6. Driving tips● Install tire chains on the front tires not install tire chains on the rear tires.● Install tire chains on front tires as tightlyas possible. Retighten chains after driving0.5 - 1.0 km (1/4 - 1/2 mile).● Install tire chains following the instruc-tions provided with the tire ■ Fitting tire chainsSide chain:The tire pressure warning valves andA 3 mm (0.12 in.) in diametertransmitters may not function correctlywhen tire chains are fitted.B 10 mm (0.39 in.) in widthC 30 mm (1.18 in.) in lengthWindshield wipersCross chain:To enable the windshield wipers to beD 4 mm (0.16 in.) in diameterlifted when heavy snow or icy condi-tions are expected, change the restE 14 mm (0.55 in.) in widthposition of the windshield wipers fromF 25 mm (0.98 in.) in lengththe retracted position below the hood Vehicles with 225/60R17 tires orto the service position using the wiper225/55R18 tireslever. (P.224)Tire chains cannot be tires should be used on the use of tirechains (vehicles with 215/60R17tires)Regulations regarding the use of tirechains vary depending on location andtype of road. Always check local regu-lations before installing chains.■ Tire chain installationObserve the following precautions wheninstalling and removing chains:● Install and remove tire chains in a safelocation.
394
4-6. Driving tips
● Install tire chains on the front tires only.
Do not install tire chains on the rear tires.
● Install tire chains on front tires as tightly
as possible. Retighten chains after driving
0.5 - 1.0 km (1/4 - 1/2 mile).
● Install tire chains following the instruc-
tions provided with the tire chains.
NOTICE
■ Fitting tire chains
Side chain:
The tire pressure warning valves and
A 3 mm (0.12 in.) in diameter
transmitters may not function correctly
when tire chains are fitted.
B 10 mm (0.39 in.) in width
C 30 mm (1.18 in.) in length
Windshield wipers
Cross chain:
To enable the windshield wipers to be
D 4 mm (0.16 in.) in diameter
lifted when heavy snow or icy condi-
tions are expected, change the rest
E 14 mm (0.55 in.) in width
position of the windshield wipers from
F 25 mm (0.98 in.) in length
the retracted position below the hood
 Vehicles with 225/60R17 tires or
to the service position using the wiper
225/55R18 tires
lever. (P.224)
Tire chains cannot be mounted.
Snow tires should be used instead.
Regulations on the use of tire
chains (vehicles with 215/60R17
tires)
Regulations regarding the use of tire
chains vary depending on location and
type of road. Always check local regu-
lations before installing chains.
■ Tire chain installation
Observe the following precautions when
installing and removing chains:
● Install and remove tire chains in a safe
location.
4-6. Driving tips395Utility vehicle precautionsWARNING■ Utility vehicle precautionsThis vehicle belongs to the utilityAlways observe the following precau-tions to minimize the risk of death or seri-vehicle class, which has higherous injury or damage to your vehicle:ground clearance and narrower● In a rollover crash, an unbelted persontread in relation to the height of itsis significantly more likely to die than acenter of wearing a seat belt. Therefore,the driver and all passengers shouldalways fasten their seat vehicle feature● Avoid sharp turns or abrupt maneu-vers, if at all possible. Specific design characteristics giveFailure to operate this vehicle cor-it a higher center of gravity thanrectly may result in loss of control orvehicle rollover causing death or seri-ordinary passenger cars. This vehi-ous design feature causes this type● Always slow down in gusty vehicle to be more likely to roll-4Because of its profile and higher cen-over. Utility vehicles have a signifi-ter of gravity, your vehicle is more sen-cantly higher rollover rate thansitive to side winds than an ordinaryDrivingpassenger car. Slowing down willother types of you to have better control. An advantage of the higher ground● Do not drive horizontally across steepclearance is a better view of theslopes. Driving straight up or straightroad allowing you to anticipatedown is preferred. Your vehicle (orany similar off-road vehicle) can sideways much more easily than It is not designed for cornering atforward or same speeds as ordinary pas-senger cars any more than low-Off-road drivingslung sports cars designed to per-Your vehicle is not designed to beform satisfactorily under off-roaddriven off-road. However, in the eventconditions. Therefore, sharp turns atthat off-road driving cannot beexcessive speeds may cause roll-avoided, please observe the to help avoid the areasprohi
4-6. Driving tips
395
Utility vehicle precautions
WARNING
■ Utility vehicle precautions
This vehicle belongs to the utility
Always observe the following precau-
tions to minimize the risk of death or seri-
vehicle class, which has higher
ous injury or damage to your vehicle:
ground clearance and narrower
● In a rollover crash, an unbelted person
tread in relation to the height of its
is significantly more likely to die than a
center of gravity.
person wearing a seat belt. Therefore,
the driver and all passengers should
always fasten their seat belts.
Utility vehicle feature
● Avoid sharp turns or abrupt maneu-
vers, if at all possible.
 Specific design characteristics give
Failure to operate this vehicle cor-
it a higher center of gravity than
rectly may result in loss of control or
vehicle rollover causing death or seri-
ordinary passenger cars. This vehi-
ous injury.
cle design feature causes this type
● Always slow down in gusty crosswinds.
of vehicle to be more likely to roll-
4
Because of its profile and higher cen-
over. Utility vehicles have a signifi-
ter of gravity, your vehicle is more sen-
cantly higher rollover rate than
sitive to side winds than an ordinary
Driving
passenger car. Slowing down will
other types of vehicles.
allow you to have better control.
 An advantage of the higher ground
● Do not drive horizontally across steep
clearance is a better view of the
slopes. Driving straight up or straight
road allowing you to anticipate
down is preferred. Your vehicle (or
any similar off-road vehicle) can tip
problems.
over sideways much more easily than
 It is not designed for cornering at
forward or backward.
the same speeds as ordinary pas-
senger cars any more than low-
Off-road driving
slung sports cars designed to per-
Your vehicle is not designed to be
form satisfactorily under off-road
driven off-road. However, in the event
conditions. Therefore, sharp turns at
that off-road driving cannot be
excessive speeds may cause roll-
avoided, please observe the following
over.
precautions to help avoid the areas
prohibited to vehicles.
 Drive your vehicle only in areas
where off-road vehicles are permit-
ted to travel.
 Respect private property. Get
owner’s permission before entering
3964-6. Driving tipsprivate property.● After driving through tall grass, mud,rock, sand, water, etc., check that Do not enter areas that are is no grass, bush, paper, rags,Honor gates, barriers and signs thatstone, sand, etc. adhering or trappedrestrict the underbody. Clear off any suchmatter from the underbody. If the vehi- Stay on established roads. Whencle is used with these materialstrapped or adhering to the underbody,conditions are wet, driving tech-a breakdown or fire could should be changed or traveldelayed to prevent damage to● When driving off-road or in ruggedterrain, do not drive at , jump, make sharp turns, strike AWD models: Avoid driving onobjects, etc. This may cause loss ofcontrol or vehicle rollover causingvery steep, slippery roads and otherdeath or serious injury. You are alsosurfaces, such as sand, where therisking expensive damage to yourvehicle’s suspension and are liable to lose traction. Yourvehicle may not perform as well asconventional AWD on-road vehi-NOTICEcles on these surfaces.■ To prevent water damageTake all necessary safety measures toWARNINGensure that water damage to the hybrid■ Off-road driving precautionsbattery (traction battery), hybrid systemor other components does not observe the following precau-tions to minimize the risk of death or seri-● Water entering the engine compart-ous injury or damage to your vehicle:ment may cause severe damage to thehybrid system. Water entering the● Drive carefully when off the road. Dointerior may cause the hybrid batterynot take unnecessary risks by drivingstowed under the rear seats to shortin dangerous .● Do not grip the steering wheel spokes● Water entering the hybrid transmis-when driving off-road. A bad bumpsion and rear electric motor (tractioncould jerk the wheel and injure yourmotor) will cause deterioration inhands. Keep both hands and especiallytransmission quality. The malfunctiony
396
4-6. Driving tips
private property.
● After driving through tall grass, mud,
rock, sand, water, etc., check that
 Do not enter areas that are closed.
there is no grass, bush, paper, rags,
Honor gates, barriers and signs that
stone, sand, etc. adhering or trapped
restrict travel.
to the underbody. Clear off any such
matter from the underbody. If the vehi-
 Stay on established roads. When
cle is used with these materials
trapped or adhering to the underbody,
conditions are wet, driving tech-
a breakdown or fire could occur.
niques should be changed or travel
delayed to prevent damage to
● When driving off-road or in rugged
terrain, do not drive at excessive
roads.
speeds, jump, make sharp turns, strike
 AWD models: Avoid driving on
objects, etc. This may cause loss of
control or vehicle rollover causing
very steep, slippery roads and other
death or serious injury. You are also
surfaces, such as sand, where the
risking expensive damage to your
vehicle’s suspension and chassis.
tires are liable to lose traction. Your
vehicle may not perform as well as
conventional AWD on-road vehi-
NOTICE
cles on these surfaces.
■ To prevent water damage
Take all necessary safety measures to
WARNING
ensure that water damage to the hybrid
■ Off-road driving precautions
battery (traction battery), hybrid system
or other components does not occur.
Always observe the following precau-
tions to minimize the risk of death or seri-
● Water entering the engine compart-
ous injury or damage to your vehicle:
ment may cause severe damage to the
hybrid system. Water entering the
● Drive carefully when off the road. Do
interior may cause the hybrid battery
not take unnecessary risks by driving
stowed under the rear seats to short
in dangerous places.
circuit.
● Do not grip the steering wheel spokes
● Water entering the hybrid transmis-
when driving off-road. A bad bump
sion and rear electric motor (traction
could jerk the wheel and injure your
motor) will cause deterioration in
hands. Keep both hands and especially
transmission quality. The malfunction
your thumbs on the outside of the rim.
indicator may come on, and the vehi-
cle may not be drivable.
● Always check your brakes for effec-
tiveness immediately after driving in
● Water can wash the grease from
sand, mud, water or snow.
wheel bearings, causing rusting and
premature failure, and may also enter
the hybrid transmission case, reducing
the gear oil’s lubricating qualities.
4-6. Driving tips397NOTICE■ When you drive through waterIf driving through water, such as whencrossing shallow streams, first check thedepth of the water and the bottom of theriverbed for firmness. Drive slowly andavoid deep water.■ Inspection after off-road driving● Sand and mud that has accumulatedaround brake discs may affect brakingefficiency and may damage brake sys-tem components.● Always perform a maintenanceinspection after each day of off-roaddriving that has taken you throughrough terrain, sand, mud, or water.4Driving
4-6. Driving tips
397
NOTICE
■ When you drive through water
If driving through water, such as when
crossing shallow streams, first check the
depth of the water and the bottom of the
riverbed for firmness. Drive slowly and
avoid deep water.
■ Inspection after off-road driving
● Sand and mud that has accumulated
around brake discs may affect braking
efficiency and may damage brake sys-
tem components.
● Always perform a maintenance
inspection after each day of off-road
driving that has taken you through
rough terrain, sand, mud, or water.
4
Driving

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals