2024-2026 Lexus LBX SUV Driving -> Secondary Collision Brake (Rear Impacts while Stopped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Secondary Collision Brake (Rear Impacts while Stopped) for Your Lexus LBX SUV First Generation (2024-2026)

312
4-5. Using the driving support systems
vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When a bicycle carrier or other acces-
sory is installed to the rear of your vehicle
• When the height of a following vehicle is
too much different from that of your vehi-
cle
● In the following situations, the system may
operate even though there is no possibil-
ity of a collision
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is surrounded by
other vehicles
• When your vehicle is stopped to make a
turn at an intersection, etc. and a vehicle
passes your vehicle from straight behind
• When your vehicle is stopped on the
roadside, etc. and a vehicle passes close
to the side of your vehicle
• When a following vehicle closely
approaches your vehicle before overtak-
ing
• When a following vehicle suddenly
approaches to close to your vehicle
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
*
: If equipped
Secondary Collision Brake
(Rear Impacts while
Stopped)
*
The Secondary Collision Brake
(Rear Impacts while Stopped) is a
system that uses the rear side radar
sensors located on the inside of the
rear bumper. When the system
determines that the possibility of a
rear-end collision while the vehicle
is stopped is very high, the brakes
are controlled automatically to
help reduce the possibility of fur-
ther damage due to a secondary
collision.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings. The Sec-
ondary Collision Brake (Rear Impacts
while Stopped) is an auxiliary system that
controls the brakes automatically when it
determines that the possibility of a rear-
end collision with the following vehicle
driving in the same lane is very high while
the vehicle is stopped. As the Secondary
Collision Brake (Rear Impacts while
Stopped) may not function to its fullest
extent in certain situations, the driver’s
own visual confirmation of safety is nec-
essary. Over reliance on this function
may lead to an accident resulting death
or serious injury.
■ To ensure the system can operate
properly
P.303
313
4
4-5. Using the driving support systems
Driving
With the Secondary Collision Brake
(Rear Impacts while Stopped), the rear
side radar sensors detect a following
vehicle driving in the same lane while
the vehicle is stopped. If the system
determines that the possibility of a
rear-end collision is very high, the
brakes and brake lights will be auto-
matically controlled to reduce the vehi-
cle speed after the rear-end collision
and help reduce the possibility of fur-
ther damage due to a secondary colli-
sion.
■ Operating conditions of Secondary
Collision Brake (Rear Impacts while
Stopped)
When the following conditions are met, the
Secondary Collision Brake (Rear Impacts
while Stopped) will operate:
● The power switch is in ON.
● The shift position is in a position other
than R.
*
● The turn signal lever is not being oper-
ated.
● Approximately 7 or more minutes have
elapsed since the system was operated.
● The relative speed between your vehicle
and the following vehicle is between
approximately 30 and 100 km/h (19 and
62 mph)
● The vehicle speed is approximately 0
km/h (0 mph).
*
: When the N shift position is selected, the
system is not operational when none of
the brake pedal, parking brake, and
brake hold system are operated.
■ The Secondary Collision Brake (Rear
Impacts while Stopped) will detect a
vehicle when
The Secondary Collision Brake (Rear
Impacts while Stopped) detects the follow-
ing vehicle driving in the same lane within
the detection range, when it determines
that the possibility of a rear-end collision
with it is very high.
■ Situations in which the Secondary Colli-
sion Brake (Rear Impacts while
Stopped) cannot detect vehicles
The Secondary Collision Brake (Rear
Impacts while Stopped) cannot detect the
following vehicles and other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Vehicles traveling in the opposite direc-
tion
● A vehicle in an adjacent lane
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
Secondary Collision Brake
(Rear Impacts while Stopped)
operation
314
4-5. Using the driving support systems
■ Situations in which the Secondary Colli-
sion Brake (Rear Impacts while
Stopped) may not operate properly
● In the following situations, the system may
not detect a following vehicle properly:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
• When the vehicle is stopped on a wet
road surface, such as in a puddle, while in
inclement weather, such as heavy rain,
snow, fog, etc.
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When towing with the vehicle
• When a following vehicle approaches
immediately after your vehicle is stopped
• When the following vehicle is not
approaching from straight behind your
vehicle
• When the following vehicle is approach-
ing from an angle
• If a vehicle suddenly cuts behind your
vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When the height of a following vehicle is
too much different from that of your vehi-
cle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
● Especially in situations such as the follow-
ing, the system may operate even though
there is no possibility of a collision:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is stopped to make a
turn at an intersection, etc. and a vehicle
passes your vehicle from straight behind
• When the vehicle is stopped at a road-
side, etc. and another vehicle passes right
next to your vehicle
• When a following vehicle closely
approaches your vehicle before overtak-
ing
• When a following vehicle suddenly
approaches close to your vehicle
• When your vehicle is surrounded by
other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When a following vehicle approaches
immediately before stopping or immedi-
ately after starting off
• When braked on a slippery road, etc.,
locking your tires, and a following vehicle
approaches
• When the vehicle is washed in a car wash
machine

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals