2024-2026 Lexus LBX SUV Driving -> Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) for Your Lexus LBX SUV First Generation (2024-2026)

340
4-5. Using the driving support systems
(System determines that possibility
of collision with detected object is
extremely high)
■ If the Parking Support Brake has oper-
ated
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
Support Brake will be disabled and the driv-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
(Parking Support Brake) operates, the
brake control is canceled after approxi-
mately 2 seconds to start off. Furthermore,
the brake control also can be canceled by
depressing the brake pedal. Depressing the
accelerator pedal again after that allows the
vehicle to start off.
■ Re-enabling the Parking Support Brake
To re-enable the Parking Support Brake
when it is disabled due to operation of the
PKSB (Parking Support Brake), either
enable the system again, or turn the power
switch off and then back to ON.
Additionally, if any of the following condi-
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.95):
● The P shift position is selected
● Drive with no operation targets in the
traveling direction of the vehicle
● Change the traveling direction of the
vehicle
■ Buzzer
Regardless of whether the Lexus parking
assist sensor is enabled or not (P.320), if
the PKSB (Parking Support Brake) system
is enabled (P.337), the buzzer will sound
to notify the driver of the approximate dis-
tance to the object when the brake control
and the hybrid system output restriction
control are operated.
*
: If equipped
This function will operate in situations
such as the following if an object is
detected in the traveling direction of
the vehicle.
Parking Support Brake
function (static objects front
and rear of the vehicle/static
objects around the vehicle)
*
If the sensors detect a static object,
such as a wall, in the traveling direc-
tion of the vehicle and the system
determines that a collision may
occur due to the vehicle suddenly
moving forward due to an acciden-
tal accelerator pedal operation, the
vehicle moving the unintended
direction due to the wrong shift
position being selected, or while
parking or traveling at low speeds,
the system will operate to lessen
the impact with the detected static
object and reduce the resulting
damage.
Examples of function operation
(static objects front and rear of
the vehicle)
341
4
4-5. Using the driving support systems
Driving
■ When traveling at a low speed and
the brake pedal is not depressed,
or is depressed late
■ When the accelerator pedal is
depressed excessively
■ When the vehicle moves forward
due to the incorrect shift position
being selected
The system will operate in the following
situations when a stationary object is
detected in the surrounding area.
Examples of function operation
(static objects around the vehi-
cle) (vehicles with Advanced
Park)
342
4-5. Using the driving support systems
■ When moving forward and a colli-
sion with a stationary object on the
inner side of a turn is likely
■ When reversing and a collision
with a stationary object on the
outer side of a turn is likely
P.319
Types of sensors
WARNING
■ To ensure the system can operate
properly
P.320
■ If the Parking Support Brake function
operates unnecessarily, such as at a
railroad crossing
P.340
■ Notes when washing the vehicle
P.321
■ Side sensors and side cameras (vehi-
cles with Advanced Park)
In situations such as the following, Park-
ing Support Brake function (static
objects around the vehicle) may not
operate correctly, possibly leading to an
accident. Proceed carefully.
● When starting off shortly after the
power switch is turned to ON and a
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off,
the vehicle on the left will not be
detected and the object warning function
will not operate.
● When an object or person is in a posi-
tion which cannot be detected by the
side sensors or side cameras.
343
4
4-5. Using the driving support systems
Driving
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.92) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• There is a static object in the traveling
direction of the vehicle and approxi-
mately 2 to 4 m (6 to 13 ft.) away.
• The Parking Support Brake determines
that a stronger-than-normal brake oper-
ation is necessary to avoid a collision.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an immediate brake operation is
necessary to avoid a collision.
■ The Parking Support Brake function
(static objects around the vehicle) will
operate when (vehicles with Advanced
Park)
This function is operable when any of the
following conditions is met in addition to the
operating conditions for static objects in
front and rear of the vehicle.
● After the hybrid system has been started,
the vehicle has moved approximately 7 m
(23.0 ft.) or less
● The R shift position is selected
● After the shift position has been changed
from R to D, the vehicle has moved
approximately 7 m (23.0 ft.) or less
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle/static objects around the vehicle
*
)
will stop operating when
*
: Vehicles with Advanced Park
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The system determines that the collision
has become avoidable with normal brake
operation.
• The static object is no longer approxi-
mately 2 to 4 m (6 to 13 ft.) away from the
vehicle or in the traveling direction of the
vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
• The static object is no longer approxi-
mately 2 to 4 m (6 to 13 ft.) away from the
vehicle or in the traveling direction of the
vehicle.
■ Detection range of the Parking Support
Brake function (static objects front and
rear of the vehicle/static objects around
the vehicle
*
)
*
: Vehicles with Advanced Park
The detection range of the Parking Support
Brake function (static objects front and rear
of the vehicle/static objects around the
vehicle) differs from the detection range of
the Lexus parking assist-sensor (P.324).
Therefore, even if the Lexus parking assist-
sensor detects an object and provides a
warning, the Parking Support Brake func-
tion (static objects front and rear of the
vehicle/static objects around the vehicle)
WARNING
● When a vehicle, person, or other
object approaches the side of the vehi-
cle after the side sensors have com-
pleted scanning the areas along the
sides of the vehicle.
● When the outside rear view mirror is
folded.
● If the 12-volt battery was discharged or
has been removed and installed, fold
and extend the outside rear view mir-
rors.
344
4-5. Using the driving support systems
may not start operating.
■ Situations in which the system may not
operate properly
P.322
■ Situations in which the system may
operate even if there is no possibility of a
collision
P.322
■ Situations in which the system may
operate even though there is no possi-
bility of a collision (static objects around
the vehicle) (vehicles with Advanced
Park)
In addition to the situations in which static
objects in front and rear of the vehicle
(P.343) may not be detected, objects
may not be detected by the sensors in the
following situations:
● When moving sideways, such as when
parallel parking (P.363)
■ Detection of objects along the sides of
the vehicle (static objects around the
vehicle) (vehicles with Advanced Park)
● Objects along the sides of the vehicle are
not instantaneously detected. The loca-
tion of objects in relation to the vehicle is
estimated after they are first detected by
the front or rear side sensors, or side
cameras. Therefore, after the power
switch is changed to ON, even if an
object is along the side of the vehicle, it
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
● If a vehicle, person, animal, etc., is
detected by a side sensors or side cam-
eras, but then leaves the detection area
of the side sensors or side cameras, the
system will assume the object has not
moved.
*
: If equipped
This function will operate in situations
such as the following if a vehicle is
detected in the traveling direction of
the vehicle.
■ When reversing, a vehicle is
approaching and the brake pedal is
not depressed, or is depressed late
P.303
Parking Support Brake
function (moving vehicles
rear of the vehicle)
*
If a rear radar sensor detects a
vehicle approaching from the right
or left at the rear of the vehicle and
the system determines that the pos-
sibility of a collision is high, this
function will perform brake control
to reduce the likelihood of an
impact with the approaching vehi-
cle.
Examples of the function opera-
tion
Types of sensors

Related Topics

Popular Owner Manuals