386
4-5. Using the driving support systems
■ Operating conditions of hill-start assist
control
When all of the following conditions are
met, the hill-start assist control will operate:
● The shift lever is in a position other than P
or N (when starting off forward/back-
ward on an upward incline)
● The vehicle is stopped
● The accelerator pedal is not depressed
● The parking brake is not engaged
● The power switch is in ON
■ Automatic system cancelation of hill-
start assist control
The hill-start assist control will turn off in any
of the following situations:
● The shift lever is shifted to P or N
● The accelerator pedal is depressed
● The brake pedal is depressed and the
parking brake is engaged
● A maximum of 2 seconds have elapsed
after the brake pedal is released
● The power switch is turned to OFF.
■ Sounds and vibrations caused by the
ABS, brake assist, VSC, TRC, Trailer
Sway Control (vehicles with towing
package) and hill-start assist control
systems
● A sound may be heard from the engine
compartment when the brake pedal is
depressed repeatedly, when the hybrid
system is started or just after the vehicle
begins to move. This sound does not indi-
cate that a malfunction has occurred in
any of these systems.
● Any of the following conditions may
occur when the above systems are oper-
ating. None of these indicates that a mal-
function has occurred.
• Vibrations may be felt through the vehi-
cle body and steering.
• A motor sound may be heard also after
the vehicle comes to a stop.
■ ECB operating sound
ECB operating sound may be heard in the
following cases, but it does not indicate that
a malfunction has occurred.
● Operating sound heard from the engine
compartment when the brake pedal is
operated.
● Motor sound of the brake system heard
from the front part of the vehicle when
the driver’s door is opened.
● Operating sound heard from the engine
compartment when one or two minutes
passed after the stop of the hybrid sys-
tem.
■ Active Cornering Assist operation
sounds and vibrations
When Active Cornering Assist is operated,
operation sounds and vibrations may be
generated from the brake system, but this is
not a malfunction.
■ Automatic reactivation of TRC, Trailer
Sway Control (vehicles with towing
package) and VSC systems
After turning the TRC, Trailer Sway Con-
trol and VSC systems off, the systems will
be automatically re-enabled in the following
situations:
● When the power switch is turned off
● If only the TRC system is turned off, the
TRC will turn on when vehicle speed
increases. If both the TRC and VSC sys-
tems are turned off, automatic re-
enabling will not occur when vehicle
speed increases.
■ Operating conditions of Active Corner-
ing Assist
The system operates when the following
occurs.
● TRC/VSC can operate
● The driver is attempting to accelerate
while turning
● The system detects that the vehicle is
drifting to the outer side
● The brake pedal is released
■ Reduced effectiveness of the EPS sys-
tem
The effectiveness of the EPS system is
reduced to prevent the system from over-