2024-2026 Lexus LBX SUV Driving -> Using the driving support systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Using the driving support systems for Your Lexus LBX SUV First Generation (2024-2026)

230
4-5. Using the driving support systems
4-5.Us ing t he driv ing su pport system s
*
: If equipped
This Owner’s Manual contains information for Ver. 2. For the latest information
about the controls, use, warnings/precautions, etc. of each function of Lexus Safety
System +, refer to the Digital Owner’s Manual at the Owner’s Manual website.
If the software of this system has been updated after initial purchase of the vehicle,
before using this system, be sure to read the Owner’s Manual which corresponds
to the software version of the system.
■ Precautions for use
● Be aware that some functions may temporarily be disabled if a legal or safety related issue
occurs.
● If a connected services contract has not been entered or has expired, software updates
will not be able to be performed wirelessly.
If the software of this system has been updated after initial purchase of the vehicle,
to access the appropriate Owner’s Manual, it is necessary to check the software
version of the system and then visit the Owner’s Manual website.
■ Checking the current software version on the Center Display
The current software version can be checked from the driving assist function
update notification.
Lexus Safety System + software update
*
It is necessary to enter a connected services contract, provided by Lexus, to
use these functions. For details, contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer.
WARNING
■ For safe use
When the Lexus Safety System + software is updated, the operating methods of functions
may change. Using this system without knowing the correct operating methods may lead
to an accident resulting in death or serious injury.
● Make sure to read the Digital Owner’s Manual which corresponds to the software ver-
sion of the system, available at the Owner’s Manual website, before using this system.
Content of the Lexus Safety System + Owner’s Manual
Checking your vehicle’s Lexus Safety System + version
231
4
4-5. Using the driving support systems
Driving
■ Selecting your vehicle’s Lexus Safety System + version
1 Access the following URL using a computer or smartphone:
2 Select the file which includes the previously checked system version.
If a software update is available, a notification will be displayed on the Center Dis-
play. Follow the instructions displayed on the screen.
When the software is updated, the way functions are used may change and func-
tions may be added.
For details about changes or additions, check the Owner’s Manual website.
■ Software update precautions
● After a software update has been performed, it will not be possible to revert to a previous
version.
● Depending on the communication environment and the content of an update, a software
update may take several hours. Although an update will be suspended when the power
Language URL QR Code
English
https://www.lexus.eu/manual?parameter=om9aj57e.
lbx.2506.hev.vh
French
https://www.lexus.eu/manual?parameter=om9aj58k.
lbx.2506.hev.vh
Germany
https://www.lexus.eu/manual?parameter=om9aj59m.
lbx.2506.hev.vh
Spanish
https://www.lexus.eu/manual?parameter=om9aj60s.
lbx.2506.hev.vh
Italy
https://www.lexus.eu/manual?parameter=om9aj61l.
lbx.2506.hev.vh
Updating the software
232
4-5. Using the driving support systems
switch is turned off, it will resume when the power switch is changed back to ON.
● Lexus Safety System + can still be used while a software update is being performed.
● In the following situations, a software update may be performed automatically:
• When a possible system issue or other safety related issue is corrected
*
• When a legal issue is corrected
*
• When small corrections which do not affect system operation or performance are made
*
: All available updates may be installed and the software updated to the most current ver-
sion.
■ Checking the driving assist function update notification
The following items can be checked or performed.
● Software version, update details, precautions, use methods, etc.
● A link to display the software update history
● Software update
233
4
4-5. Using the driving support systems
Driving
Lexus Safety System +
The Lexus Safety System + consists
of the driving assist systems and
contributes to a safe and comfort-
able driving experience:
WARNING
■ Lexus Safety System +
The Lexus Safety System + operates
under the assumption that the driver will
drive safely, and is designed to help
reduce the impact to the occupants in a
collision and assist the driver under nor-
mal driving conditions.
As there is a limit to the degree of recog-
nition accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
solely responsible for paying attention to
the vehicle’s surroundings and driving
safely.
■ For safe use
● Do not overly rely on this system. The
driver is solely responsible for paying
attention to the vehicle’s surroundings
and driving safely. This system may not
operate in all situations and provided
assistance is limited. Over-reliance on
this system to drive the vehicle safely
may lead to an accident resulting in
death or serious injury.
● Do not attempt to test the operation of
the system, as it may not operate prop-
erly, possibly leading to an accident.
● If attention is necessary while perform-
ing driving operations or a system mal-
function occurs, a warning message or
warning buzzer will be operated. If a
warning message is displayed on the
display, follow the instructions dis-
played.
● Depending on external noise, the vol-
ume of the audio system, etc. it may be
difficult to hear the warning buzzer.
Also, depending on the road condi-
tions, it may be difficult to recognize
the operation of the system.
■ When it is necessary to disable the
system
In the following situations, make sure to
disable the system.
Failure to do so may lead to the system
not operating properly, possibly leading
to an accident resulting in death or seri-
ous injury.
● When the vehicle is tilted due to being
overloaded or having a flat tire
● When driving at extremely high
speeds
● When towing another vehicle
● When the vehicle is being transported
by a truck, ship, train, etc.
● When the vehicle is raised on a lift and
the tires are allowed to rotate freely
● When inspecting the vehicle using a
drum tester such as a chassis
dynamometer or speedometer tester,
or when using an on vehicle wheel bal-
ancer
● When the vehicle is driven in a sporty
manner or off-road
● When using an automatic car wash
● When a sensor is misaligned or
deformed due to a strong impact
being applied to the sensor or the area
around the sensor
● When accessories which obstruct a
sensor or light are temporarily
installed to the vehicle
234
4-5. Using the driving support systems
■ AHS (Adaptive High-beam Sys-
tem)
*
P.214
■ AHB (Automatic High Beam)
P.218
■ PCS (Pre-Collision System)
P.242
■ LTA (Lane Tracing Assist)
P.253
■ LDA (Lane Departure Alert)
P.261
■ LCA (Lane Change Assist)
*
P.258
■ FCTA (Front Crossing Traffic
Alert)
*
P.272
■ PDA (Proactive Driving Assist)
P.266
■ RSA (Road Sign Assist)
P.274
■ Dynamic radar cruise control
P.278
■ Cruise control
P.291
■ Speed Limiter
P.298
■ Emergency Driving Stop System
P.296
■ Driver monitor
P.241
*
: If equipped
Various sensors are used to obtain the
necessary information for system
operation.
■ Sensors which detect the sur-
rounding conditions
Front
Front radar sensor
Front camera
WARNING
● When a compact spare tire or tire
chains are installed to the vehicle or an
emergency tire puncture repair kit has
been used
● When the tires are excessively worn or
the inflation pressure of the tires is low
● When tires other than the manufac-
turer specified size are installed
● When the vehicle cannot be driven
stably, due to a collision, malfunction,
etc.
Driving assist systems
Sensors used by Lexus Safety
System +
A
B
235
4
4-5. Using the driving support systems
Driving
Front side radar sensors
*
*
: If equipped
Rear
Rear side radar sensors
■ Sensors which detect the driver
condition
Driver monitor camera
WARNING
■ To prevent malfunction of the radar
sensors
Observe the following precautions.
Failure to do so may lead to a radar sen-
sor not operating properly, possibly
leading to an accident resulting in death
or serious injury.
C
A
A
● Keep the radar sensors and radar sen-
sor covers clean at all times.
Clean the front of a radar sensor or the
front or back of a radar sensor cover if it
is dirty or covered with water droplets,
snow, etc.
When cleaning the radar sensor and
radar sensor cover, use a soft cloth to
remove dirt so as to not damage them.
Radar sensor
Radar sensor cover
● Vehicles with front side radar sensors:
Keep the surrounding area of the front
side radar sensors on the front bumper
clean at all times.
● Do not attach accessories, stickers
(including transparent stickers), alumi-
num tape, etc. to a radar sensor or
radar sensor cover and their sur-
rounding area.
A
B
236
4-5. Using the driving support systems
WARNING
● Do not subject a radar sensor or its
surrounding area to impact.
If a radar sensor, the front grille, or front
bumper has been subjected to a impact,
have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● Do not disassemble the radar sensors.
● Do not modify or paint the radar sen-
sors or radar sensor cover, or replace
them with anything other than Lexus
genuine parts.
● In the following situations, recalibra-
tion of the radar sensors will be neces-
sary. For details, contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
• When a radar sensor is removed and
installed, or replaced
• When the front bumper or the front
grille has been replaced
■ Radar sensor cover with a heater (if
equipped)
When the system determines that snow
may pile up over the radar sensor cover,
the heater will operate automatically. If
the area around the radar sensor cover is
to be touched, such as during cleaning,
make sure that the radar sensor cover is
cool enough to prevent burns.
■ To prevent malfunction of the front
camera
Observe the following precautions.
Failure to do so may lead to the front
camera not operating properly, possibly
leading to an accident resulting in death
or serious injury.
● Always keep the windshield clean.
• If the windshield is dirty or covered
with an oily film, water droplets, snow,
etc., clean the windshield.
• Even if a glass coating agent is applied
to the windshield, it will still be neces-
sary to use the windshield wipers to
remove water droplets, etc. from the
area of the windshield in front of the
front camera.
• If the inner side of the windshield
where the front camera is installed is
dirty, contact any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer.
● Do not attach stickers (including trans-
parent stickers) or other items to the
area of the windshield in front of the
front camera (shaded area in the illus-
tration).
Approximately 4 cm (1.6 in.)
Approximately 4 cm (1.6 in.)
● If the part of the windshield in front of
the front camera is fogged up or cov-
ered with condensation or ice, use the
windshield defogger to remove the
fog, condensation, or ice.
● If water droplets cannot be properly
removed from the area of the wind-
shield in front of the front camera by
the windshield wipers, replace the
wiper insert or wiper blade.
● Do not attach window tint to the wind-
shield.
A
B
237
4
4-5. Using the driving support systems
Driving
WARNING
● Replace the windshield if it is damaged
or cracked.
If the windshield has been replaced,
recalibration of the front camera will be
necessary. For details, contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
● Do not allow liquids to contact the
front camera.
● Do not allow bright lights to shine into
the front camera.
● Do not damage the lens of the front
camera or allow it to become dirty.
When cleaning the inside of the wind-
shield, do not allow glass cleaner to con-
tact the lens of the front camera. Do not
touch the lens of the front camera.
If the lens of the front camera is dirty or
damaged, contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
● Do not subject the front camera to a
strong impact.
● Do not change the position or orienta-
tion of the front camera or remove it.
● Do not disassemble the front camera.
● Do not modify any parts around the
front camera, such as the inside rear
view mirror or ceiling.
● Do not attach accessories which may
obstruct the front camera to the hood,
front grille, or front bumper. For
details, contact any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer.
● If a surfboard or other long object is to
be mounted on the roof, make sure
that it will not obstruct the front cam-
era.
● Do not modify or change the head-
lights and other lights.
■ Front camera installation area on the
windshield
If the system determines that the wind-
shield may be fogged up, it will automati-
cally operate the heater to defog the part
of the windshield around the front cam-
era. When cleaning, etc., be careful not
to touch the area around the front cam-
era until the windshield has cooled suffi-
ciently, as touching it may cause burns.
■ Precautions for the driver monitor
camera
Observe the following precautions.
Failure to do so may lead to malfunction
of the driver monitor camera and the sys-
tems not operating properly, possibly
leading to an accident resulting in death
or serious injury.
● Do not subject the driver monitor
camera or its surrounding area to
strong impact.
If subjected to a strong impact, the driver
monitor camera may move out of align-
ment and the driver may no longer be
detected correctly. In this case, have the
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● Do not disassemble or modify the
driver monitor camera.
● Do not attach accessories, stickers
(including transparent stickers), etc. to
the driver monitor camera or its sur-
rounding area.
● Do not allow the driver monitor cam-
era or its surrounding area to get wet.
238
4-5. Using the driving support systems
■ Precautions for use
It is necessary to enter a connected ser-
vices contract, provided by Lexus, to use
these functions. For details, contact any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer
● LCA (Lane Change Assist) (if equipped)
P.258
■ Situations in which the sensors and the
systems may not operate properly
● When the height or inclination of the
vehicle has been changed due to modifi-
cations
● When the windshield is dirty, fogged up,
cracked or damaged
● When the ambient temperature is high or
low
● When mud, water, snow, dead insects,
foreign matter, etc., is attached to the
front of the sensor
● When in inclement weather such as
heavy rain, fog, snow, or a sandstorm
● When water, snow, dust, etc. is thrown up
in front of the vehicle, or when driving
through mist or smoke
● When the headlights are not illuminated
while driving in the dark, such as at night
or when in a tunnel
● When the lens of a headlight is dirty and
illumination is weak
● When the headlights are misaligned
● When a headlight is malfunctioning
● When the headlights of another vehicle,
sunlight, or reflected light shines directly
into the front camera
● When the brightness of the surrounding
area changes suddenly
● When driving near a TV tower, broad-
casting station, electric power plant,
radar equipped vehicles, etc., or other
location where strong radio waves or
electrical noise may be present
● When a wiper blade is blocking the front
camera
● When in a location or near objects which
strongly reflect radio waves, such as the
following:
• Tunnels
• Truss bridges
• Gravel roads
• Rutted, snow-covered roads
• Walls
• Large trucks
• Manhole covers
• Guardrail
• Metal plates
● When near a step or protrusion
● When a detectable vehicle is narrow,
such as a small mobility vehicle
● When a detectable vehicle has a small
front or rear end, such as an unloaded
truck
● When a detectable vehicle has a low
front or rear end, such as a low bed trailer
● When a detectable vehicle has extremely
WARNING
● Do not cover the driver monitor cam-
era or place anything in front of it.
● Keep the lens of the driver monitor
camera free from damage.
● Do not touch the lens of the driver
monitor camera or allow it to become
dirty.
When there is dirt or fingerprints on the
camera lens, clean it with a dry, soft cloth
so as to not mark or damage it.
● When cleaning the lens, do not use
detergents or organic solvents that
may damage plastic.
239
4
4-5. Using the driving support systems
Driving
high ground clearance
● When a detectable vehicle is carrying a
load which protrudes from its cargo area
● When a detectable vehicle has little
exposed metal, such as a vehicle which is
partially covered with cloth, etc.
● When a detectable vehicle is irregularly
shaped, such as a tractor, sidecar, etc.
● When the distance between the vehicle
and a detectable vehicle has become
extremely short
● When a detectable vehicle is at an angle
● When snow, mud, etc. is attached to a
detectable vehicle
● When driving on the following kinds of
roads:
• Roads with sharp curves or winding
roads
• Roads with changes in grade, such as
sudden inclines or declines
• Roads which is sloped to the left or right
• Roads with deep ruts
• Roads which are rough and unmain-
tained
• Roads which frequently undulate or are
bumpy
● When the steering wheel is being oper-
ated frequently or suddenly
● When the vehicle is not in a constant
position within a lane
● When parts related to this system, the
brakes, etc. are cold or extremely hot,
wet, etc.
● When the wheels are misaligned
● When driving on slick road surfaces, such
as when it is covered with ice, snow,
gravel, etc.
● When the course of the vehicle differs
from the shape of a curve
● When the vehicle speed is excessively
high when entering a curve
● When entering/exiting a parking lot,
garage, car elevator, etc.
● When driving in a parking lot
● When driving through an area where
there are obstructions which may contact
your vehicle, such as tall grass, tree
branches, a curtain, etc.
● When driving in strong wind
■ Situations in which the lane may not be
detected
● When the lane is extremely wide or nar-
row
● Immediately after changing lanes or
passing through an intersection
● When driving in a temporary lane or lane
regulated by construction
● When there are structures, patterns,
shadows which are similar to lane lines in
the surrounding
● When there are multiple white lines for a
lane line
● When the lane lines are not clear or driv-
ing on a wet road surface
● When a lane line is on a curb
● When driving on a bright, reflective road
surface, such as concrete
■ Situations in which some or all of the
functions of the system cannot operate
● When a malfunction is detected in this
system or a related system, such as the
brakes, steering, etc.
● When the VSC, TRC, or other safety
related system is operating
● When the VSC, TRC, or other safety
related system is off
■ Changes in brake operation sound and
pedal response
● When the brakes have been operated,
brake operation sounds may be heard
and the brake pedal response may
change, but this does not indicate a mal-
240
4-5. Using the driving support systems
function.
● When the system is operating, the brake
pedal may feel stiffer than expected or
sink. In either situation the brake pedal
can be depressed further. Further
depress the brake pedal as necessary.
■ Situations in which the driver monitor
may not operate properly
In situations such as the following, the driver
monitor camera may not be able to detect
the driver’s face, and the function may not
operate properly.
● When the inside of the vehicle is hot, such
as after the vehicle has been parked in
the sun
● When a very bright light, such as the sun
or the headlights of following vehicle,
shines onto the driver monitor camera
● When the brightness inside the vehicle
changes frequently due to the shadows of
surrounding structures, etc.
● When a very bright light, such as the sun
or the headlights of an oncoming vehicle,
is shining onto the driver’s face
● When light, either inside or outside of the
vehicle, is being reflected from the lenses
of eyeglasses or sunglasses
● When there are multiple faces in the
detection range of the driver monitor
camera, such as when a front or rear pas-
senger is leaning toward the driver’s seat
● When the driver’s face is outside of the
detection range of the driver monitor
camera, such as when leaned forward or
when their head is outside of the window
● When the driver monitor camera is being
blocked by the steering wheel, a hand
holding the steering wheel, an arm, etc.
● When the driver is wearing a hat
● When the driver is wearing an eyepatch
● When the driver is wearing eyeglasses or
sunglasses that do not easily transmit
infrared rays
● When the driver is wearing contact
lenses
● When the driver is wearing a face mask
● When the driver is laughing or their eyes
are only slightly open
● When the driver’s eyes, nose, mouth, or
shape of their face is blocked
● When the driver is wearing makeup
which makes it difficult to detect their
eyes, nose, mouth, or shape of their face
● When the driver’s eyes are blocked by
the frame of eyeglasses, sunglasses, hair,
etc.
● When there is a device inside the vehicle
that radiates near infrared rays, such as a
non-genuine driver monitoring system.
241
4
4-5. Using the driving support systems
Driving
During controlled driving, the driver
monitor camera detects the position
and direction the driver is facing, and
whether their eyes are opened or
closed. Through this, the system deter-
mines if the driver is checking their sur-
roundings and if the driver can perform
driving operations.
■ Warning function
In situations such as the following, a
buzzer will sound and a message will
be displayed to warn the driver.
When the system determines that
the driver is not paying attention to
the road or their eyes are closed
When the driver’s face cannot be
detected or the system determines
that the driver has poor driving pos-
ture
■ Face identification
The driver monitor is used as a device
to identify faces in order to identify an
individual.
For information about how to use the
face identification function, priorities
among other devices of individual
identification, and linked vehicle set-
tings, see “My Settings”. (P.172)
■ Warning function
These functions may not operate when the
vehicle speed is low.
■ Face identification
Face identification starts when the door is
opened then closed.
In face identification, facial traits are digi-
tized and stored in a built-in computer, to
be used for identification in My Settings.
● Face image or video are not stored.
Voice is not stored either.
● Digitized face information is not used for
any purpose other than identification in
My Settings. Additionally, face informa-
tion cannot be decoded and will not be
disclosed or provided to a third party.
● Face information can be deleted by your-
self.
● For the handling of face information,
please consent to the following before
using it:
• Face identification does not guarantee a
complete identity authentication, colla-
tion, or identification.
• When face information registration fails
frequently or face identification fails fre-
Driver monitor
Basic functions
WARNING
■ For safe use
● The driver monitor is not designed to
prevent the driver from driving care-
lessly or having a poor driving posture.
Pay careful attention to the surround-
ing conditions in order to ensure safe
driving.
● The driver monitor cannot reduce
drowsiness. If you feel unable to con-
centrate or drowsy, take a break and
sleep as necessary in order to ensure
safe driving.
242
4-5. Using the driving support systems
quently, the driver cameras should be
cleaned or face information should be
registered again.
• Face information stored in the vehicle
computer cannot be decoded or moved
to another media. Therefore, it is neces-
sary to register face information again
once it is deleted or relevant parts are
replaced.
• Once deleted, face information cannot
be restored. It is necessary to register
face information again.
■ Situations where face identification may
not be performed correctly
This system is designed for use to identify
facial traits. In the following situations, face
information may not be able to be regis-
tered or identified correctly:
● When a part of the driver’s face (eye-
brows, eyes, nose, or mouth) is not visible
● When the driver is wearing glasses/sun
glasses, a face mask, muffler, etc.
● When the driver is not facing front
● When part of driver’s face is covered
with hair, beard, a hand, clothes, jewelry,
etc.
● When the driver is closing eyes
● When a non-registered driver is a twin,
etc. with a registered driver, whose face
looks quite alike with each other
■ Situations in which the driver monitor
may not operate properly
P.240
The settings of Driver monitor can be
changed through customize settings.
(P.566)
Changing Driver monitor set-
tings
PCS (Pre-Collision System)
The pre-collision system uses sen-
sors to detect objects (P.243) in
the path of the vehicle. When the
system determines that the possi-
bility of a frontal collision with a
detectable object is high, a warning
operates to urge the driver to take
evasive action and the potential
brake pressure is increased to help
the driver avoid the collision. If the
system determines that the possi-
bility of a collision is extremely high,
the brakes are automatically
applied to help avoid the collision or
help reduce the impact of the colli-
sion.
The pre-collision system can be dis-
abled/enabled and the warning tim-
ing can be changed. (P.252)
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Pay careful attention
to the surrounding conditions in order
to ensure safe driving.
Never use the pre-collision system in
place of normal braking operations. This
system cannot help avoid or reduce the
impact of a collision in every situation.
Over-reliance on this system to drive the
vehicle safely may lead to an accident
resulting in death or serious injury.
243
4
4-5. Using the driving support systems
Driving
The system can detect the following as
detectable objects. (Detectable
objects differ depending on the func-
tion.)
Vehicles
Bicycles
*
Pedestrians
Motorcycles
*
Walls
*
: Detected as a detectable object only
when being ridden.
■ Pre-collision warning
When the system determines that the
possibility of a collision is high, a buzzer
will sound and an icon and warning
message will be displayed on the multi-
information display to urge the driver
to take evasive action.
If the detectable object is a vehicle,
moderate braking will be performed
with the warning.
If the system determines that the accel-
erator pedal is strongly depressed, the
following icon and message will be dis-
played on the multi-information dis-
play.
■ Pre-collision brake assist
If the system determines that the possi-
bility of a collision is high and the brake
operation by the driver is insufficient,
the braking power will be increased.
■ Pre-collision brake control
If the system determines that the possi-
bility of a collision is extremely high, the
brakes are automatically applied to
help avoid the collision or reduce the
WARNING
● Although the pre-collision system is
designed to help avoid or help reduce
the impact of a collision, its effective-
ness may change according to various
conditions. Therefore, it may not
always be able to achieve the same
level of performance.
Read the following items carefully. Do
not overly rely on this system and always
drive carefully.
• For safe use: P.230
■ When to disable the pre-collision sys-
tem
● When it is necessary to disable the sys-
tem: P.233
Detectable objects
System functions
244
4-5. Using the driving support systems
impact of the collision.
■ Emergency steering assist
If the system determines that the fol-
lowing conditions are met, assistance
will be provided to help enhance vehi-
cle stability and prevent lane depar-
ture. During assistance, in addition to
the pre-collision warning, the follow-
ing icon will be displayed on the multi-
information display.
The possibility of a collision is high
There is sufficient space within the
lane to perform evasive steering
maneuvers
The driver is operating the steering
wheel
Vehicles with active steering function:
The brakes and steering are controlled
to help avoid a collision or reduce the
impact of a collision, regardless of the
evasive steering maneuvers per-
formed by the driver.
During assistance, the pre-collision
warning will operate and a message
will be displayed to warn the driver.
■ Intersection collision avoidance
support (left/right turn)
In situations such as the following, if the
system determines that the possibility
of a collision is high, the pre-collision
warning and pre-collision braking will
operate.
Depending on the intersection, assis-
tance may not operate correctly.
When turning left/right at an inter-
section and crossing the path of an
oncoming vehicle
When turning left/right and a
pedestrian or bicycle is detected
■ Intersection collision avoidance
support (crossing vehicles)
At an intersection, etc., if the system
determines that the possibility of a col-
lision with an approaching vehicle or
motorcycle is high, the pre-collision
warning and pre-collision braking will
operate.
Depending on the intersection, assis-
245
4
4-5. Using the driving support systems
Driving
tance may not operate correctly.
■ Acceleration Suppression at Low
Speed
When driving at a low speed, if the
accelerator pedal is strongly
depressed and the system determines
that there is a possibility of a collision,
hybrid system output will be restrained
or the brakes will be applied weakly to
restrict acceleration. During operation,
a buzzer will sound and a warning indi-
cator and message will be displayed on
the multi-information display.
WARNING
■ Pre-collision braking
● When the pre-collision braking func-
tion is operating, a large amount of
braking force will be applied.
● The pre-collision braking function is
not designed to hold the vehicle
stopped. If the vehicle is stopped by
pre-collision brake control, the driver
should operate the brakes immedi-
ately as necessary.
● The pre-collision braking function may
not operate if certain operations are
performed by the driver. If the acceler-
ator pedal is being depressed strongly
or the steering wheel is being turned,
the system may determine that the
driver is taking evasive action and pos-
sibly prevent the pre-collision braking
function from operating.
● If the brake pedal is being depressed,
the system may determine that the
driver is taking evasive action and pos-
sibly delay the operation timing of the
pre-collision brake control.
■ Acceleration Suppression at Low
Speed
If the steering wheel is being turned, the
system may determine that the driver is
taking evasive action and possibly pre-
vent the Acceleration Suppression at
Low Speed function from operating or
possibly causing its operation to be can-
celed.
■ Emergency steering assist
● The emergency steering assist will be
canceled when the system determines
that lane departure prevention control
has completed.
● Depending on operations performed
by the driver, emergency steering
assist may not operate or operation
may be canceled.
• If the accelerator pedal is depressed
strongly, the steering wheel is turned
heavily, the brake pedal is depressed,
or the turn signal lever is operated, the
system may determine that the driver
is taking evasive action and the emer-
gency steering assist may not operate.
246
4-5. Using the driving support systems
■ Operating conditions of each function of the pre-collision system
The pre-collision system is enabled and the system determines that the possibility of a fron-
tal collision with a detected object is high.
However, the system will not operate in the following situations:
● When the vehicle has not been driven a certain amount after a terminal of the 12-volt bat-
tery has been disconnected and reconnected
● When the shift position is in R
● When the VSC OFF indicator is illuminated (only the pre-collision warning function will
be operational)
The following are the operational speeds and cancelation conditions of each function:
● Pre-collision warning
WARNING
• While the emergency steering assist is
operating, if the accelerator pedal is
depressed strongly, the steering wheel
is turned heavily, or the brake pedal is
depressed, the system may determine
that the driver is taking evasive action
and emergency steering assist opera-
tion may be canceled.
• While the emergency steering assist is
operating, if the steering wheel is held
or turned in the opposite direction of
system operation, emergency steer-
ing assist operation will be canceled.
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles
Approximately 5 to 180
km/h (3 to 110 mph)
Approximately 5 to 180
km/h (3 to 110 mph)
Oncoming vehicles
Approximately 30 to 180
km/h (20 to 110 mph)
Approximately 80 to 220
km/h (50 to 130 mph)
Bicycles
Approximately 5 to 80 km/h
(3 to 50 mph)
Approximately 5 to 80 km/h
(3 to 50 mph)
Pedestrians
Approximately 5 to 80 km/h
(3 to 50 mph)
Approximately 5 to 80 km/h
(3 to 50 mph)
247
4
4-5. Using the driving support systems
Driving
While the pre-collision warning is operating, if the steering wheel is operated heavily or sud-
denly, the pre-collision warning may be cancelled.
● Pre-collision brake assist
● Pre-collision braking
Preceding motorcycles,
stopped motorcycles
Approximately 5 to 180
km/h (3 to 110 mph)
Approximately 5 to 180
km/h (3 to 110 mph)
Oncoming motorcycles
Approximately 30 to 180
km/h (20 to 110 mph)
Approximately 30 to 180
km/h (20 to 110 mph)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles
Approximately 30 to 180
km/h (20 to 110 mph)
Approximately 10 to 180
km/h (7 to 110 mph)
Bicycles
Approximately 30 to 80
km/h (20 to 50 mph)
Approximately 30 to 80
km/h (20 to 50 mph)
Pedestrians
Approximately 30 to 80
km/h (20 to 50 mph)
Approximately 30 to 80
km/h (20 to 50 mph)
Preceding motorcycles,
stopped motorcycles
Approximately 30 to 180
km/h (20 to 110 mph)
Approximately 10 to 80
km/h (7 to 50 mph)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles
Approximately 5 to 180
km/h (3 to 110 mph)
Approximately 5 to 180
km/h (3 to 110 mph)
Oncoming vehicles
Approximately 30 to 180
km/h (20 to 110 mph)
Approximately 80 to 220
km/h (50 to 130 mph)
Bicycles
Approximately 5 to 80 km/h
(3 to 50 mph)
Approximately 5 to 80 km/h
(3 to 50 mph)
Pedestrians
Approximately 5 to 80 km/h
(3 to 50 mph)
Approximately 5 to 80 km/h
(3 to 50 mph)
Preceding motorcycles,
stopped motorcycles
Approximately 5 to 180
km/h (3 to 110 mph)
Approximately 5 to 80 km/h
(3 to 50 mph)
Oncoming motorcycles
Approximately 30 to 180
km/h (20 to 110 mph)
Approximately 30 to 180
km/h (20 to 110 mph)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
248
4-5. Using the driving support systems
If either of the following occur while the pre-collision braking function is operating, it will be
canceled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
● Emergency steering assist
The emergency steering assist will not operate when the turn signal lights are flashing.
*
: Minimum vehicle speed: Vehicle speed at which evasion using pre-collision brake con-
trol is difficult
While the emergency steering assist is operating, if any of the following are performed,
emergency steering assist operation may be cancelled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
• The brake pedal is depressed
● Intersection collision avoidance support (left/right turn)
The intersection collision avoidance support (for left/right turning vehicles) will not operate
when the turn signal lights are not flashing.
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles, bicycles, pedestri-
ans, motorcycles
Approximately 40 to 80
km/h (25 to 50 mph)
Approximately 40 to 80
km/h (25 to 50 mph)
Preceding vehicles, stopped
vehicles, bicycles, pedestri-
ans, motorcycles
Active steering function (if
equipped):
*
to 80 km/h (
*
to
50 mph)
Active steering function (if
equipped):
*
to 80 km/h (
*
to
50 mph)
Detectable objects Vehicle speed
Oncoming vehicle
speed
Relative speed
between your vehi-
cle and object
Oncoming vehicles
Approximately 5 to
40 km/h (3 to 25
mph)
Approximately 5 to
75 km/h (3 to 45
mph)
Approximately 10 to
115 km/h (7 to 70
mph)
Pedestrians
Approximately 5 to
30 km/h (3 to 20
mph)
-
Approximately 5 to
40 km/h (3 to 25
mph)
249
4
4-5. Using the driving support systems
Driving
● Intersection collision avoidance support (crossing vehicles)
Vehicles without front side radars
Vehicles with front side radars
When driving at approximately 40 km/h (29 mph) or more, this system will only operate
when the speed of the other vehicle is approximately 40 km/h (29 mph) or less.
The system operates only when the crossing vehicle speed is same as or less than the vehi-
cle speed.
● Acceleration Suppression at Low Speed
The Acceleration Suppression at Low Speed function will not operate when the turn signal
lights are flashing.
Bicycles
Approximately 5 to
30 km/h (3 to 20
mph)
-
Approximately 5 to
50 km/h (3 to 30
mph)
Oncoming motorcy-
cles
Approximately 5 to
40 km/h (3 to 25
mph)
Approximately 5 to
75 km/h (3 to 45
mph)
Approximately 10 to
115 km/h (7 to 70
mph)
Detectable objects Vehicle speed
Crossing vehicle
speed
Relative speed
between your vehi-
cle and object
Vehicles, Motorcy-
cles (side)
Approximately 5 to
60 km/h (3 to 38
mph)
• Your vehicle
speed or less
• Approximately 40
km/h or less (25
mph or less)
Approximately 5 to
60 km/h (3 to 38
mph)
Detectable objects Vehicle speed
Crossing vehicle
speed
Relative speed
between your vehi-
cle and object
Vehicles, Motorcy-
cles (side)
Approximately 5 to
60 km/h (3 to 38
mph)
Approximately 50
km/h or less (31 mph
or less)
Approximately 5 to
60 km/h (3 to 38
mph)
Detectable objects Vehicle speed
Oncoming vehicle
speed
Relative speed
between your vehi-
cle and object
250
4-5. Using the driving support systems
While the Acceleration Suppression at Low Speed function is operating, if any of the follow-
ing are performed, the low speed sudden acceleration suppression function operation will
be cancelled:
• The accelerator pedal is released.
• The steering wheel is operated heavily or suddenly
■ Detection of detectable objects
Objects are detected based on their size,
shape, and movement.
Depending on the ambient brightness,
movement, posture and direction of a
detectable object, it may not be detected
and the system may not operate properly.
The system detects shapes, such as the fol-
lowing, as detectable objects.
■ Situations in which the system may
operate even though the possibility of a
collision is not high
● In certain situations, such as the following,
the system may determine that the possi-
bility of a collision is high and operate:
• When passing a detectable object
• When changing lanes while overtaking a
detectable object
• When suddenly approaching a detect-
able object
• When approaching a detectable object
or other object on the roadside, such as
guardrails, utility poles, trees, walls, etc.
• When there is a detectable object or
other object by the roadside at the
entrance of a curve
• When there are patterns or a painting
ahead of the vehicle that may be mis-
taken for a detectable object
• When passing a detectable object that is
changing lanes or turning left/right
• When passing a detectable object which
is stopped to make a left/right turn
• When a detectable object stops immedi-
ately before entering the path of the vehi-
cle
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles, Pedestrians, Bicy-
cles, Wall
Approximately 0 to 15 km/h
(0 to 9 mph)
Approximately 0 to 15 km/h
(0 to 9 mph)
251
4
4-5. Using the driving support systems
Driving
• When passing through a location with a
structure above the road (traffic sign, bill-
board, etc.)
• When approaching an electric toll gate
barrier, parking lot barrier, or other bar-
rier that opens and closes
• When turning left/right and an oncoming
vehicle, oncoming motorcycle, pedes-
trian or bicycle crosses in front of the
vehicle
• When attempting to turn left/right in
front of an oncoming vehicle, oncoming
motorcycle, pedestrian or bicycle
• When turning left/right and an oncoming
vehicle, oncoming motorcycle, pedes-
trian or bicycle stops or changes course
immediately before entering the path of
the vehicle
• When turning left/right and an oncoming
vehicle turns left/right in front of the vehi-
cle
• When the steering wheel is operated
toward the path of an oncoming vehicle
• When there is an object moving above or
under the road
■ Situations in which the system may not
operate properly
● In certain situations, such as the following,
a detectable object may not be detected
by the front sensors, and the system may
not operate properly:
• When a detectable object is approaching
your vehicle
• When your vehicle or a detectable object
is wandering
• When a detectable object makes an
abrupt maneuver (such as sudden swerv-
ing, acceleration or deceleration)
• When suddenly approaching a detect-
able object
• When the detectable object is near a
wall, fence, guardrail, manhole cover,
steel plate on the road surface, or
another vehicle
• When there is a structure above a
detectable object
• When part of a detectable object is hid-
den by another object (large luggage,
umbrella, guardrail, etc.)
• When multiple detectable objects are
overlapping
• When a bright light, such as the sun, is
reflecting off of a detectable object
• When a detectable object is white and
looks extremely bright
• When the color or brightness of a detect-
able object causes it to blend in with its
surroundings
• When a detectable object cuts in front of
or suddenly emerges in front of your
vehicle
• When approaching a vehicle which is
diagonal
• If a bicycle is a child sized bicycle, is car-
rying a large load, is carrying an extra
passenger, is carrying a forward leaning
rider, or has an unusual shape (bicycles
equipped with a child seat, tandem bicy-
252
4-5. Using the driving support systems
cles, etc.)
• If a pedestrian or bicycle is shorter than
approximately 1 m (3.2 ft.) or taller than
approximately 2 m (6.5 ft.).
• When the silhouette of a pedestrian or
bicycle is unclear (such as when they are
wearing a raincoat, long skirt, etc.)
• When a pedestrian is bending forward or
squatting
• When a pedestrian or bicycle is moving
at high speed
• When a pedestrian is pushing a stroller,
wheelchair, bicycle or other vehicle
• When a detectable object blends in with
the surrounding area, such as when it is
dim (at dawn or dusk) or dark (at night or
in a tunnel)
• When the vehicle has not been driven for
a certain amount of time after the hybrid
system was started
• While turning left/right or a few seconds
after turning left/right
• While driving around a curve and a few
seconds after driving around a curve
• When turning left/right and an oncoming
vehicle is driving in a lane 3 or more lanes
from the vehicle
• When turning left/right and the direction
of the vehicle differs greatly from the
direction traffic flows in the oncoming
lane
• When turning left/right, a pedestrian or
bicycle behind the vehicle comes in front
of it as if it overtakes the vehicle
• When at an intersection, the approaching
crossing vehicle is long in overall length,
such as a large truck, towing trailer, etc.
● In addition to the preceding, in certain sit-
uations, such as the following, the emer-
gency steering assist may not operate
properly:
• When a detectable object is too close to
the vehicle
• When there is insufficient space to per-
form evasive steering maneuvers or an
obstruction exists in the evasion direction
• When there is an oncoming vehicle
● In addition to the preceding, in certain sit-
uations, such as the following, walls may
not be detected as a target object and the
Acceleration Suppression at Low Speed
function may not operate properly:
• When scenery behind the wall is visible,
such as a glass door, grid fence, etc.
• When the wall is slanted or low
• When the wall is narrow, such as a pole,
etc.
• When the wall is made of plants, such as a
hedge, etc.
• When the road, etc. is reflected on the
wall
• When the vehicle is approaching the wall
at an angle
The pre-collision system can be
enabled/disabled through a cus-
tomize setting. (P.563)
The system is enabled each time the power
switch is turned to ON.
When the system is disabled, the
PCS warning light will illuminate
and a message will be displayed on
the multi-information display.
The pre-collision setting can be
changed on the customize settings.
(P.563)
Changing the pre-collision set-
ting
253
4
4-5. Using the driving support systems
Driving
Vehicles without active steering
function: When the pre-collision
warning timing is changed, the
emergency steering assist timing
will also be changed.
When later is selected, the emergency
steering assist will not operate in most
cases.
Vehicles with active steering func-
tion: When the pre-collision warn-
ing timing is changed, the
emergency steering assist (exclud-
ing the active steering function) tim-
ing will also be changed.
When later is selected, the emergency
steering assist (excluding the active
steering function) will not operate in
most cases.
When the system determines that
the driver is not facing forward, the
pre-collision warning and emer-
gency steering assist will operate at
the earlier timing, regardless of the
user setting.
When the dynamic radar cruise
control is operating, the pre-colli-
sion warning will operate at the ear-
lier timing, regardless of the user
setting.
When driving on a road with clear
lane lines with the dynamic radar
cruise control operating, lane lines
and preceding and surrounding
vehicles are detected using the front
camera and radar sensor, and the
steering wheel is operated to main-
tain the vehicle’s lane position.
Use this function only on highways and
expressways.
If the dynamic radar cruise control is not
operating, the function will not operate.
In situations where the lane lines are diffi-
cult to see or are not visible, such as when
in a traffic jam, support will be provided
using the path of preceding and surround-
ing vehicles.
If the system determines that the steering
wheel has not been operated for a certain
amount of time or the steering wheel is not
being firmly gripped, the driver will be
alerted and this function will be temporarily
canceled.
If the steering wheel is firmly gripped, the
function will begin operating again.
LTA (Lane Tracing Assist)
LTA functions
254
4-5. Using the driving support systems
When the function is operating, if
the vehicle is likely to depart from its
lane, the driver will be alerted via a
display and buzzer.
When the buzzer sounds, check the area
around the vehicle and carefully operate
the steering wheel to move the vehicle
back to the center of the lane.
■ Operating conditions of function
This function is operable when all of the fol-
lowing conditions are met:
● The LTA system detects lane lines or the
WARNING
■ Before using the LTA system
● Do not overly rely on the LTA system.
The LTA system is not a system which
provides automated assistance in driv-
ing and it is not a system which
reduces the amount of attention nec-
essary for safe driving. The driver is
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
● When not using the LTA system, turn it
off using the LTA switch.
255
4
4-5. Using the driving support systems
Driving
path of preceding or surrounding vehi-
cles.
● The dynamic radar cruise control is oper-
ating.
● The lane width is approximately 3 to 4 m
(10 to 13 ft.).
● The turn signal lever is not being oper-
ated.
● The vehicle is not being driven around a
sharp curve.
● The vehicle is not accelerating or decel-
erating more than a certain amount.
● The steering wheel is not being turned
with a large force.
● The hands off steering wheel warning
(P.255) is not operating.
● The vehicle is being driven in the center
of a lane.
■ Temporary cancelation of functions
● When the operating conditions are no
longer met, a function may be temporar-
ily canceled. However, when the opera-
tion conditions are met again, operation
of the function will automatically be
restored. (P.254)
● If the operating conditions of a function
are no longer met while the function is
operating, a buzzer may sound to indi-
cate that the function has been temporar-
ily canceled.
● The steering assist operation of the func-
tion can be overridden by the steering
wheel operation of the driver.
■ Lane departure warning function when
the LTA is operating
● Even if the LDA warning method is
changed to vibration of the steering
wheel, if the vehicle deviates from the
lane while the LTA is operating, the warn-
ing buzzer will sound to alert the driver.
● If steering wheel operation equivalent to
that necessary for a lane change is
detected, the system will determine the
vehicle is not deviating from the lane and
the warning will not operate.
■ Hands off steering wheel warning oper-
ation
● When the system determines the driver is
not holding the steering wheel, a mes-
sage urging the driver to grip the steering
wheel and the icon shown in the illustra-
tion will be displayed on the multi-infor-
mation display to warn the driver. If the
system detects that the steering wheel is
held, the warning will be canceled. When
using the system, make sure to grip the
steering wheel firmly, regardless of
whether the warning is operating or not.
● If no operations are detected for a certain
amount of time, the warning will operate
and the function will be temporarily can-
celed. This warning may also operate if
the driver only operates steering wheel a
small amount continuously.
■ Situations in which the hands off steer-
ing wheel warning may not operate
properly
● Depending on the condition of the vehi-
cle, handle control condition and road
surface, the warning function may not
operate.
● Vehicles with LCA: In the following situa-
tions, the system may not be able to
detect when the driver’s hands are off the
steering wheel.
• When a steering wheel cover is installed
• When the driver is wearing gloves
• When foreign matter is attached to the
steering wheel
• When the driver is gripping the wood
trim, seam of the leather, spokes, or other
part of the steering wheel that does not
have sensors
● Vehicles with LCA: In the following situa-
tions, the hands off steering wheel warn-
ing may not operate and the LTA
256
4-5. Using the driving support systems
function may continue operating even
though the driver’s hands are off the
steering wheel:
• When something other than a hand is
contacting the steering wheel
• When a wide object or arms are held
across the steering wheel
The LTA will change between
ON/OFF each time the LTA switch is
pressed.
When the LTA is ON, the LTA indicator
will illuminate.
Vehicles without a head-up display
Vehicles with a head-up display
Enabling/disabling the system
WARNING
■ Situations in which the functions may
not operate properly
In the following situations, the functions
may not operate properly and the vehi-
cle may depart from its lane. Do not
overly rely on these functions. The driver
is solely responsible for paying attention
to their surroundings and operating the
steering wheel as necessary to ensure
safety.
● When a preceding or surrounding
vehicle changes lanes (Your vehicle
may follow the preceding or surround-
ing vehicle and also change lanes)
● When a preceding or surrounding
vehicle is swaying (Your vehicle may
sway accordingly and depart from the
lane)
● When a preceding or surrounding
vehicle departs from a lane (Your
vehicle may follow the preceding or
surrounding vehicle and also depart
from the lane)
● When a preceding or surrounding
vehicle is being driven extremely close
to the left/right lane line (Your vehicle
may follow the preceding or surround-
ing vehicle accordingly and depart
from the lane)
● When there are moving objects or
structures in the surrounding area
(Depending on the position of the
moving object or structure relative to
your vehicle, your vehicle may sway)
257
4
4-5. Using the driving support systems
Driving
The operating state of the LTA system is indicated.
WARNING
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the sensors may not
operate properly: P.238
● Situations in which the lane may not be
detected: P.239
● When it is necessary to disable the sys-
tem: P.233
Operation display of steering wheel operation support
Indicator Lane display Steering icon Situation
White Gray/White Gray
LTA is on standby
Green Green Green
LTA is operating
Yellow
Flashing
Yellow
Flashing
Green
The vehicle is depart-
ing the lane toward
the side which the
lane display is flash-
ing
258
4-5. Using the driving support systems
*
: If equipped
This function is linked to the LTA and
provides assistance in performing lane
changes through steering wheel oper-
ations.
Use this function only on highways and
expressways.
The steering assist operation can be over-
ridden by the steering wheel operation of
the driver.
The lane change assist function is not
designed to operate when changing lanes
at a junction.
■ Operating conditions of function
This function is operable when all of the fol-
lowing conditions are met:
● The LTA is operating.
● The lane change assist function is
enabled by a customize setting.
● The vehicle speed is between approxi-
mately 80 and 140 km/h (50 and 85
mph).
● The system recognizes the current road
as a highway or expressway.
● The system detects a broken white line
on the side which the lane change is to be
performed.
● A vehicle is not detected in the lane
toward which the turn signal is operated.
● The navigation system map data is cor-
rect.
● The steering wheel is not being turned
with a large force.
● The hands off steering wheel warning
(P.255) is not operating.
LCA (Lane Change Assist)
*
LCA functions
WARNING
■ Before using the LCA system
● Do not overly rely on the LCA system.
The LCA system is not a system which
provides automated assistance in driving
and it is not a system which reduces the
need for checking an adjacent lane for
other vehicles, approaching vehicles, etc.
when changing lanes. The driver is solely
responsible for paying attention to their
surroundings and operating the steering
wheel as necessary to ensure safety.
Also, do not use the LCA to change
lanes into which a lane change should
not be performed (oncoming lanes, road
shoulders, etc.).
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
259
4
4-5. Using the driving support systems
Driving
● The system has detected a moving object
behind the vehicle at least once since the
hybrid system was started.
■ Cancelation of functions
In the following situations, LCA operation
may be canceled during operation, while
notifying the driver with the display and a
buzzer:
● When the operating conditions
(P.258) are no longer met
● When the system can no longer detect
lane lines
● When the turn signal lever is operated to
the second position (P.259)
● When the turn signal lever is operated in
the opposite direction of the lane change
● When the system detects operation of
the steering wheel, brake pedal or accel-
erator pedal by the driver
● The hands off steering wheel warning
(P.259) is operating.
If the system detects that a vehicle is quickly
approaching in the lane toward which the
turn signal is operated a buzzer will sound
and a message will be displayed to alert the
driver. At the same time the steering wheel
may be slightly operated to help keep the
vehicle away from the approaching vehicle.
■ Hands off steering wheel warning oper-
ation
When the system determines the driver is
not holding the steering wheel, a message
urging the driver to grip the steering wheel
and the icon shown in the illustration will be
displayed on the multi-information display
to warn the driver. If the system detects that
the steering wheel is held, the warning will
be canceled. When using the system, make
sure to grip the steering wheel firmly,
regardless of whether the warning is oper-
ating or not.
■ Situations in which the hands off steer-
ing wheel warning may not operate
properly
● Depending on the condition of the vehi-
cle, handle control condition and road
surface, the warning function may not
operate.
● In the following situations, the system may
not be able to detect when the driver’s
hands are off the steering wheel.
• When a steering wheel cover is installed
• When the driver is wearing gloves
• When foreign matter is attached to the
steering wheel
• When the driver is gripping the wood
trim, seam of the leather, spokes, or other
part of the steering wheel that does not
have sensors
● In the following situations, the hands off
steering wheel warning may not operate
and the LCA function may continue
operating even though the driver’s hands
are off the steering wheel:
• When something other than a hand is
contacting the steering wheel
• When a wide object or arms are held
across the steering wheel
If the turn signal lever is held in the first
position, the lane change direction will
be displayed and the function will oper-
ate.
To change lanes by holding the turn
signal lever in the first position without
using the LCA, turn the customize set-
ting of the LCA off.
Operating the LCA
260
4-5. Using the driving support systems
1 First position: LCA is operational
2 Second position: LCA is not opera-
tional
LCA can be enabled/disabled through
a customize setting. (P.564)
The operating state of the LCA system is indicated.
WARNING
■ Situations in which the LCA should
not be used
● When driving on a one lane road
● When there is no broken white line
between the current lane and the lane
to be changed to
Enabling/disabling the system
Displays and system operation
LCA display Steering icon Condition
Gray arrow and green line
Green
LCA on standby
Blue arrow and white line
LCA is operating
Gray
Approaching vehicle
detected while LCA is oper-
ating
Not displayed
Gray
Lane line no longer detected
while LCA is operating
261
4
4-5. Using the driving support systems
Driving
The LDA system warns the driver if the
vehicle may deviate from the current
lane or course
*
, and also can slightly
operate the steering wheel to help
avoid deviation from the lane or
course
*
.
The front camera is used to detect lane
lines or a course
*
.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
■ Lane departure alert function
When the system determines that the
vehicle might depart from its lane or
course
*
, a warning is displayed on a
display, and either a warning buzzer
will sound or the steering wheel will
vibrate to alert the driver.
Check the area around your vehicle and
carefully operate the steering wheel to
move the vehicle back to the center of the
lane or course
*
.
If the system determines that the vehicle
may collide with a vehicle in an adjacent
lane, the lane departure alert will operate
even if the turn signals are operating.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
■ Lane departure prevention func-
tion
If the system determines that the vehi-
cle is likely to depart from its lane or
course
*
, it provides assistance through
steering wheel operations to help
avoid deviation from the lane or
course.
If the system determines that the steering
wheel has not been operated for a certain
amount of time or the steering wheel is not
being firmly gripped, a warning message
may be displayed and a warning buzzer
may sound to alert the driver.
Vehicles with BSM: If the system deter-
mines that the vehicle may collide with a
vehicle in an adjacent lane, the lane depar-
ture prevention function will operate even
if the turn signals are operating.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
LDA (Lane Departure Alert)
Basic functions
262
4-5. Using the driving support systems
■ Break suggestion function
If the vehicle is swaying, a message will
be displayed and a buzzer will sound to
urge the driver to take a break.
■ Operating conditions of each function
● Lane departure alert/prevention function
This function is operable when all of the fol-
lowing conditions are met:
• The vehicle speed is approximately 50
km/h (30 mph) or more.
Operation may be possible when the vehi-
cle speed is approximately 40 km/h (25
mph) or more if vehicles, motorcycles, bicy-
cles, or pedestrians are detected near the
lane.
• The system recognizes a lane or course
*
.
(When recognized on only one side, the
system will operate only for the recog-
nized side.)
• The lane width is approximately 3 m (9.8
ft.) or more.
• The turn signal lever is not being oper-
ated.
(Vehicles with BSM: Except when a vehicle
is detected in the direction that the turn sig-
nal lever is operated.)
• The vehicle is not being driven around a
sharp curve.
• The vehicle is not accelerating or decel-
erating more than a certain amount.
WARNING
■ Before using the LDA system
● Do not overly rely on the LDA system.
The LDA system is not a system which
provides automated assistance in driv-
ing and it is not a system which
reduces the amount of attention nec-
essary for safe driving. The driver is
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
263
4
4-5. Using the driving support systems
Driving
• The steering wheel is not being turned
sufficiently to perform a lane change.
• When the VSC or TRC system is not
turned off
*
: Boundary between the asphalt and grass,
soil, etc., or structures, such as a curb,
guardrail, etc.
■ Temporary cancellation of functions
When the operating conditions are no lon-
ger met, a function may be temporarily can-
celed. However, when the operation
conditions are met again, operation of the
function will automatically be restored.
(P.262)
■ Operation of the lane departure alert
function/lane departure prevention
function
● Depending on the vehicle speed, road
conditions, lane departure angle, etc.,
operation of the lane departure preven-
tion function may not be felt or the func-
tion may not operate.
● Depending on the conditions, the warn-
ing buzzer may operate even if vibration
is selected through a customize setting.
● If a course
*
is not clear or straight, the
lane departure alert function or lane
departure prevention function may not
operate.
● The lane departure alert function or lane
departure prevention function may not
operate if the system judges that the vehi-
cle is intentionally being steered to avoid
a pedestrian or parked vehicle.
● Vehicles with BSM: It may not be possi-
ble for the system to judge if there is dan-
ger of a collision with a vehicle in an
adjacent lane.
● Depending on the driver condition, the
lane departure alert function or lane
departure prevention function changes
the timing of operation.
● The steering assist operation of the lane
departure prevention function can be
overridden by the steering wheel opera-
tion of the driver.
*
: Boundary between the asphalt and grass,
soil, etc., or structures, such as a curb,
guardrail, etc.
■ Hands off steering wheel warning oper-
ation
In the following situations, a message urging
the driver to operate the steering wheel and
an icon will be displayed and a buzzer will
sound to warn the driver. When using the
system, make sure to grip the steering
wheel firmly, regardless of whether the
warning is operating or not.
● When the system determines that the
driver is not securely holding the steering
wheel, or the steering wheel is not being
operated when the steering assist opera-
tion of the lane departure prevention
function is operating
The length of time that the warning buzzer
operates will become longer as the fre-
quency of the steering assist operating
increases. Even if the system judges that the
steering wheel has been operated, the
warning buzzer will sound for a certain
amount of time.
■ Break suggestion function
This function is operable when all of the fol-
lowing conditions are met:
● The vehicle speed is approximately
65km/h (40mph) or more.
● The lane width is approximately 3 m (9.8
ft.) or more.
Depending on the condition of the vehicle
and road surface, the break suggestion
function may not operate.
264
4-5. Using the driving support systems
Vehicles without a head-up display: Press
the meter control switch to turn off the
message.
Vehicles with a head-up display: Press the
steering switch to turn off the message.
Unless or is pressed, the message
of the break suggestion function will remain
displayed.
The LDA system can be
enabled/disabled through a cus-
tomize setting. (P.564)
The settings of the LDA can be
changed on the customize settings.
(P.564)
When the system determines that
the driver is tired, the lane departure
warning function will operate at the
“Earlier” timing, regardless of the
customized setting. Also, this setting
will be kept until the power switch is
turned off.
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
Changing LDA settings
WARNING
■ Situations in which the system may
not operate properly
In the following situations, the system
may not operate properly and the vehi-
cle may depart from its lane. Do not
overly rely on these functions. The driver
is solely responsible for paying attention
to their surroundings and operating the
steering wheel as necessary to ensure
safety.
● When the boundary between the
asphalt and grass, soil, etc., or struc-
tures, such as a curb, guardrail, etc. is
not clear or straight
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the lane may not be
detected: P.239
● Situations in which the sensors may not
operate properly: P.238
● Situations in which some or all of the
functions of the system cannot oper-
ate: P.239
● When it is necessary to disable the sys-
tem: P.233
Displays and system operation
265
4
4-5. Using the driving support systems
Driving
Indicator Lane display Steering icon Situation
Yellow
Illuminated
Not illuminated Not illuminated System disabled
Not illuminated
Gray
Not illuminated
Lane lines are not detected by the
system
Not illuminated
White
Not illuminated
Lane lines are detected by the sys-
tem
Yellow
Flashing
Yellow
Flashing
Not illuminated
Lane departure alert function is
operating for the side which the lane
display is flashing
Green Green Green
Lane departure prevention function
is operating for the side which the
lane display is illuminated
Yellow
Flashing
Yellow
Flashing
Green
Lane departure alert function/lane
departure prevention function is
operating for the side which the lane
display is flashing
266
4-5. Using the driving support systems
According to the driving conditions, the operation and detectable objects of the
proactive driving assist will change as follows.
PDA (Proactive driving
assist)
When a detectable object
(P.266) is detected, the proac-
tive driving assist operates the
brakes and steering wheel to help
prevent the vehicle from approach-
ing too close to the object.
WARNING
■ For safe use
Driving safely is solely the responsibility
of the driver.
● The proactive driving assist is
designed to provide some assistance
for regular braking and steering oper-
ations, as well as helping to prevent the
vehicle from approaching too close to
a detectable object. However, the
scope of this assistance is limited.
The driver should perform brake and
steering operations as necessary. Read
the following items carefully. Do not
overly rely on the proactive driving assist
and always drive carefully. (P.268)
● The proactive driving assist is not a
system which reduces the amount of
attention necessary for safe driving.
Even if the system is operating cor-
rectly, the surrounding conditions as
recognized by the driver and detected
by the system may differ. It is neces-
sary for the driver to pay attention,
assess risks, and ensure safety. Over-
reliance on this system to drive the
vehicle safely may lead to an accident
resulting in death or serious injury.
● Proactive driving assist is not a system
which allows for inattentive driving and
is not a system which assists in poor
visibility conditions. The driver is solely
responsible for paying attention to
their surroundings and driving safely.
■ When turning proactive driving assist
off
● Situations in which the sensors may not
operate properly: P.238
● When it is necessary to disable the sys-
tem: P.233
System operating conditions and detectable objects
267
4
4-5. Using the driving support systems
Driving
Function Conditions Operation Detectable objects
Obstacle Anticipa-
tion Assist (OAA)
A detectable object
is detected crossing
the road
Assistance with some
brake operations is
provided in order to
reduce the possibility
of a collision.
Pedestrians
Bicyclists
A detectable object
is detected on the
side of the road
Assistance with some
brake and steering
wheel operations are
provided according
to the surrounding
conditions to help
prevent the vehicle
from approaching
too close to a
detected object.
Pedestrians
Bicyclists
Parked vehicles
Assistance with
steering wheel oper-
ations is provided
within a range that
the vehicle will not
deviate from its cur-
rent lane.
Deceleration Assist
(DA)
A preceding vehicle
or an adjacent vehi-
cle cutting in front of
the vehicle is
detected
The vehicle is gently
decelerated so that
the vehicle-to-vehi-
cle distance will not
be excessively short.
Preceding vehicles
Motorcycles
A curve is detected
ahead of the vehicle
The vehicle is gently
decelerated if the
vehicle speed is
determined to be too
high for the curve
ahead.
None
Steering Assist (SA) Lane is detected
The system antici-
pates the driver’s
operation and sup-
ports the operation of
the steering wheel.
None
268
4-5. Using the driving support systems
■ Vehicle speeds at which the system can
operate
● Detectable object crossing the road
assistance
Approximately 30 to 60 km/h (20 to 35
mph)
● Detectable object on the side of the road
assistance
Approximately 30 to 60 km/h (20 to 35
mph)
● Preceding vehicle deceleration assis-
tance
Approximately 20 km/h (15 mph) or more
● Curve deceleration assistance
Approximately 20 km/h (15 mph) or more
● Steering assist within a lane
Approximately 10 to 140 km/h (5 to 80
mph)
■ System operation will be canceled when
● In the following situations, system opera-
tion will be canceled:
• When the dynamic radar cruise control
or cruise control is operating
• When the PCS is off
• Situations in which some or all of the
functions of the system cannot operate:
P.239
• When the P, R or N shift position is
selected
● In the following situations, the brake
operation assist will be canceled:
• The vehicle speed is approximately 15
km/h (9 mph) or less
• When a certain vehicle speed has been
reached, as judged by the system,
according to the surrounding conditions
● In the following situations, system opera-
tion may be canceled:
• When the brake control or output
restriction control of a driving support
system operates (For example: PCS,
drive-start control)
• When the system determines that a
detected object has moved away from
the vehicle
• When lane lines can no longer be
detected
• When the brake pedal has been
depressed
• When the accelerator pedal has been
depressed
• When the steering wheel has been oper-
ated with more than a certain amount of
force
• When the turn signal lever is operated to
the left/right turn position
WARNING
■ Situations in which the system may
not operate properly
● Situations in which the lane may not be
detected: P.239
● When a detectable object stops
immediately before entering the path
of the vehicle
● When passing extremely close to a
detectable object behind a guardrail,
fence, etc.
● When changing lanes while overtak-
ing a detectable object
● When passing a detectable object that
is changing lanes or turning left/right
● When there are objects (guardrails,
power poles, trees, walls, fences,
poles, traffic cones, mailboxes, etc.) in
the surrounding area
● When there are patterns or a painting
ahead of the vehicle that may be mis-
taken for a detectable object
● When passing through a place with a
low structure above the road (tunnel
with a low ceiling, traffic sign, sign-
board, etc.)
● When driving on snowy, icy, or rutted
roads
● When a detectable object is
approaching your vehicle
269
4
4-5. Using the driving support systems
Driving
The proactive driving assist can be
enabled/disabled through a cus-
tomize setting. (P.565)
The following settings of the proac-
WARNING
● When your vehicle or a detectable
object is wandering
● When the movement of a detectable
object changes (change in direction,
sudden acceleration or deceleration,
etc.)
● When suddenly approaching a detect-
able object
● When a preceding vehicle or motor-
cycle is not directly in front of your
vehicle
● When there is a structure above a
detectable object
● When part of a detectable object is
hidden by another object (large lug-
gage, umbrella, guardrail, etc.)
● When multiple detectable objects are
overlapping
● When a bright light, such as the sun or
headlights of another vehicle, is
reflecting off of the detectable object
● When the detectable object is white
and looks extremely bright
● When the color or brightness of the
detectable object causes it to blend in
with its surroundings
● When a detectable object cuts in front
of or emerges from beside a vehicle
● When approaching a vehicle ahead
which is perpendicular or at an angle
to the vehicle, or is facing the vehicle
● If a parked vehicle is perpendicular or
at an angle to the vehicle
● When a bicycle is a child sized bicycle,
is carrying a large load, is carrying an
extra passenger, or has an unusual
shape (bicycles equipped with a child
seat, tandem bicycles, etc.)
● When a pedestrian or bicyclist is
shorter than approximately 1 m (3.2 ft.)
or taller than approximately 2 m (6.5
ft.)
● When the silhouette of a pedestrian or
bicyclist is unclear (such as when they
are wearing a raincoat, long skirt, etc.)
● When a pedestrian or bicyclist is
bending forward or squatting
● When a pedestrian or bicyclist is mov-
ing at high speed
● When a pedestrian is pushing a
stroller, wheelchair, bicycle or other
vehicle
● When a detectable object blends in
with the surrounding area, such as
when it is dim (at dawn or dusk) or
dark (at night, in a tunnel, etc.)
● When the lane width is 4 m (13.1 ft.) or
more
● When the lane width is 2.5 (8.2 ft.) m
or less
● When the vehicle has not been driven
for a certain amount of time after the
hybrid system was started
● While turning left or right or a few sec-
onds after turning left or right
● While changing lanes or a few sec-
onds after changing lanes
● When entering a curve, driving around
a curve and a few seconds after driving
around a curve
Changing proactive driving
assist settings
270
4-5. Using the driving support systems
tive driving assist can be changed
through customize settings.
(P.565)
Depending on the situation, the following indicators or icons will be displayed.
Some icons cannot be displayed unless the display is changed to the driving safety
support function information screen.
System operation display
Icon Meaning
White: Monitoring for detectable objects
Green: Detectable object crossing the
road or detectable object on the side of
the road assistance operating
A pedestrian has been detected as crossing
the road or on the side of the road and brake
or steering assistance is operating
A vehicle has been detected on the side of
the road and brake or steering operation
assistance is being performed
Steering operation assistance is being
performed to prevent the vehicle from
approaching too close to a detectable
object on the side of the road
When the steering assist is operating
Preceding vehicle deceleration assistance is
being performed
Warning to maintain appropriate vehicle-to-
vehicle distance
Curve deceleration assistance is being per-
formed
271
4
4-5. Using the driving support systems
Driving
■ Hands off steering wheel warning oper-
ation
In the following situations, a message urging
the driver to grip the steering wheel and the
icon shown in the illustration will be dis-
played on the display to warn the driver. If
the system detects that the steering wheel is
held, the warning will be canceled. When
using the system, make sure to grip the
steering wheel firmly, regardless of whether
the warning is operating or not.
● When assistance to a detectable object
crossing the road or assistance to a
detectable object on the side of the road
is performed and the system determines
the driver is not holding the steering
wheel
If no operations are detected for a certain
amount of time, a buzzer will sound, the
warning will operate. This warning may also
operate if the driver only operates steering
wheel a small amount continuously.
■ Warning operation after preceding
vehicle deceleration assistance has
ended
After preceding vehicle deceleration assis-
tance has ended, if the driver does not
operate the brake pedal or accelerator
pedal and the vehicle approaches the pre-
ceding vehicle, the display will flash and a
buzzer will sound to urge the driver to
decelerate. If the system determines that
the driver is operating the brake pedal or
accelerator pedal, the warning will be can-
celed.
272
4-5. Using the driving support systems
*
: If equipped
When the system detects a vehicle
approaching from the left or right in
front of your vehicle when
approaching an intersection, a noti-
fication will be displayed.
• Head-up display (if equipped)
When the system determines that
your vehicle may be about to enter
an intersection even though a vehi-
cle is approaching from the left or
right in front of your vehicle, a
buzzer will sound and a message
will be displayed to urge you to
depress the brake pedal.
• Multi-information display
■ FCTA system operating conditions
The system will operate when all of the fol-
lowing conditions are met:
● A shift position other than P or R is
selected
● The vehicle speed is approximately 15
km/h (10 mph) or less
● A vehicle is approaching from the left or
right in front of your vehicle at a speed
between approximately 10 to 60 km/h (7
to 37 mph)
● There are no vehicles in front of your
vehicle
● The accelerator pedal is not being
strongly depressed
FCTA (Front Crossing Traffic
Alert)
*
When approaching an intersection,
etc., at a low speed, vehicles
approaching from the left and right
of the front of the vehicle can be
detected and the driver informed of
these vehicles.
FCTA system control
WARNING
■ For safe use
Driving safely is solely the responsibility
of the driver. Pay careful attention to the
surrounding conditions in order to
ensure safe driving. The FCTA system is
a supplementary system that informs the
driver of vehicles approaching from the
left and right of the front of the vehicle.
Over-reliance on this system may lead to
an accident resulting in death or serious
injury. The details of the warning display
may differ from the actual traffic condi-
tions. Although the warning display will
stop being displayed after a certain
amount of time, this does not necessarily
indicate that there are no longer any
vehicles or pedestrians around your
vehicle.
273
4
4-5. Using the driving support systems
Driving
● The brake pedal is not being strongly
depressed
■ Situations in which the system may
operate even though no vehicles are
approaching
In certain situations, such as the following,
the system may operate even though no
vehicles are approaching:
● When approaching objects on the road-
side, such as guardrails, traffic signs, util-
ity poles, street lights, trees, tall grass,
walls, etc.
● When passing an object on the side of
the road, such as a parked vehicle
● When a vehicle or pedestrian is
approaching from the left or right in front
of your vehicle in the distance
● When a vehicle or pedestrian is moving
within a parking spot, etc., next to the lane
your vehicle is in
● When a pedestrian or bicyclist is
approaching on a sidewalk
● When a vehicle or pedestrian is moving
away from your vehicle
● When an approaching vehicle is deceler-
ating or stops
● When an approaching vehicle makes a
left/right turn immediately in front of your
vehicle
● When a pedestrian is approaching your
vehicle
● When an oncoming vehicle makes a
right/left turn
● When your vehicle enters an intersection
before a vehicle approaching from the
left or right in front of your vehicle
● When stopped at traffic light and a vehi-
cle approaches from the left or right in
front of your vehicle
● When making a left/right turn in front of
an approaching vehicle
● When an oncoming vehicle approaches
and passes
● When being overtaken by another vehi-
cle
● When driving next to another vehicle or a
pedestrian
● When a vehicle or pedestrian
approaches the side of your vehicle
■ Situations in which the system may not
operate properly
In situations such as the following, a vehicle
may not be detected by a front side radar
sensor and the system may not operate
properly:
● If an approaching vehicle moves sud-
denly (sudden steering, acceleration,
deceleration, etc.)
● If a vehicle is approaching from the left or
right of the front of your vehicle diago-
nally
● When a vehicle is approaching from the
left or right in front of your vehicle in the
distance
● When there is an object between your
vehicle and an approaching vehicle
● When several vehicles are approaching
with little space between them
● Situations in which the sensors may not
operate properly: P.238
274
4-5. Using the driving support systems
● Situations in which some or all of the
functions of the system cannot operate:
P.239
The FCTA can be enabled/disabled
through a customize setting.
(P.564)
The following settings of the FCTA
can be changed through customize
settings. (P.564)
When the front camera detects a
sign or information of a sign is avail-
able from the navigation system, the
Changing FCTA settings
RSA (Road Sign Assist)
The RSA system detects specific
road signs using the front camera
and/or navigation system (when
speed limit information is available)
and warns the driver via displays
and buzzers.
WARNING
■ For safe use
● Regardless of the availability of RSA
display/buzzer, including conditional
speed limit alert, it is the driver who is
solely responsible for driving safely
and abiding by the regulations. There-
fore, do not overly rely on this system.
The driver is solely responsible for
paying attention to the vehicle’s sur-
roundings and driving safely.
● Do not rely solely upon the RSA. The
RSA assists the driver by providing
road sign information, but it is not a
replacement for the driver’s own vision
and awareness. Driving safely is solely
the responsibility of the driver. Pay
careful attention to the surrounding
conditions in order to ensure safe driv-
ing.
■ Situations in which the RSA should
not be used
When it is necessary to disable the sys-
tem: P.233
■ Situations in which the system may
not operate properly
Situations in which the sensors may not
operate properly: P.238
Display Function
275
4
4-5. Using the driving support systems
Driving
sign will be displayed on the display.
Multiple signs can be displayed.
Depending on the specifications of the
vehicle, the number of displayed signs may
be limited.
■ Operating conditions of sign display
Signs will be displayed when the following
conditions are met:
● The system has detected a sign
In the following situations, a displayed sign
may stop being displayed:
● When a new sign has not been detected
for a certain distance
● When the system determines that the
road being driven on has changed, such
as after a left or right turn
■ Situations in which the display function
may not operate properly
In the following situations, the RSA system
may not operate properly and may not
detect signs or may display the incorrect
sign. However, this does not indicate a mal-
function.
● When a sign is dirty, faded, tilted or bent
● When the contrast of an electronic sign is
low
● When all or part of a sign is hidden by a
tree, utility pole, etc.
● When a sign is detected by the front
camera for a short amount of time
● When the driving state (turning, chang-
ing lanes, etc.) is judged incorrectly
● When a sign is immediately after a free-
way junction or in an adjacent lane just
before merging
● When stickers are attached to the rear of
a preceding vehicle
● When a sign similar to a system compati-
ble sign is detected as a system compati-
ble sign
● When a speed limit sign for a frontage
road is within detection range of the front
camera
● When driving around a roundabout
● When a sign intended for trucks, etc. is
detected
● When the vehicle is driven in a country
with a different direction of traffic
● When the navigation system map data is
out of date
● When the navigation system cannot be
used
In this case, the speed limit signs displayed
on the multi-information display and navi-
gation system display may differ.
In the following situations, the RSA sys-
tem will output a warning to notify the
driver.
If the vehicle speed exceeds the
speed warning threshold of the
speed limit sign displayed on the
display, the sign display will be
emphasized and a buzzer will
sound.
Also when the limit speed to be displayed
is changed due to the change of driving
zones, etc., the sign display will be empha-
sized and a buzzer will sound
*
to alert the
driver.
*
*
: The availability of emphasized display
and buzzer depends on the country
where the vehicle is available.
When the RSA system detects a no-
entry sign and determines that the
vehicle has entered the no-entry
area based on the map information
of the navigation system, the no-
entry sign displayed on the multi-
information display will flash and a
buzzer will sound.
Notification function
276
4-5. Using the driving support systems
■ Operating conditions of the notification
functions
● Excess speed notification function
This function will operate when the follow-
ing condition is met:
• A speed limit road sign is recognized by
the system.
● No entry notification function
This function will operate when all of the fol-
lowing conditions are met:
• More than one no entry road signs are
recognized by the system simultaneously.
• The vehicle is passing between no entry
road signs recognized by the system.
• The vehicle is equipped with an on-board
navigation system.
The following types of road signs
can be displayed.
However, non-standard or recently intro-
duced traffic signs may not be displayed.
• Speed limit road signs
*
*
: No speed limit information is dis-
played when neither speed limit road
sign nor speed limit related information
is available.
• Speed limit related information
*1, 2
*1
: Displayed when a sign is detected but
speed limit information for the road is
not available from the navigation sys-
tem.
*2
: No speed limit information is dis-
played when neither speed limit road
sign nor speed limit related information
is available.
Types of road signs supported
Speed limit begins/Maximum
speed zone begins
Speed limit ends/Maximum
speed zone ends
Motorway
Motorway exit
Expressway
Expressway exit
Urban area beginning
Urban area ending
Residential area beginning
Residential area ending
277
4
4-5. Using the driving support systems
Driving
• No overtaking road signs
• Other road signs
• Speed limit with supplemental mark
*1
*1
: Displayed simultaneously with a speed
limit sign.
*2
: Content not recognized.
Depending on the specifications of
the vehicle, signs may be displayed
overlapping.
The following settings of the RSA
can be changed through customize
settings. (P.566)
No overtaking begins
No overtaking ends
No-entry
End of prohibition
Stop
Warning
Ice
Supplemental mark exists
*2
Exit ramp on right
Exit ramp on left
Time
Duplicate display example
Changing RSA settings
278
4-5. Using the driving support systems
Dynamic radar cruise con-
trol
This dynamic radar cruise control
detects the presence of vehicles
ahead, determines the current
vehicle-to-vehicle distance, and
operates to maintain a suitable dis-
tance from the vehicle ahead. The
desired vehicle-to-vehicle dis-
tance can be set by operating the
vehicle-to-vehicle distance switch.
Use the dynamic radar cruise con-
trol only on highways and express-
ways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Do not overly rely on
this system, and pay careful attention
to the surrounding conditions in order
to ensure safe driving.
● The dynamic radar cruise control pro-
vides driving assistance to reduce the
driver’s burden. However, there are
limitations to the assistance provided.
Read the following items carefully. Do
not overly rely on this system and always
drive carefully.
Conditions under which the system may
not operate correctly: P.286
● Set the speed appropriately according
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for confirm-
ing the set speed.
● Even if the system is operating cor-
rectly, the condition of a preceding
vehicle as recognized by the driver
and detected by the system may differ.
Therefore, it is necessary for the driver
to pay attention, assess risks, and
ensure safety. Over-reliance on this
system to drive the vehicle safely may
lead to an accident resulting in death
or serious injury.
■ Precautions for the driving assist sys-
tems
Observe the following precautions, as
there are limitations to the assistance
provided by the system. Over-reliance
on this system may lead to an accident
resulting in death or serious injury.
● Details of support provided for the
driver’s vision
The dynamic radar cruise control is only
intended to help the driver in determin-
ing the distance between the driver’s
own vehicle and a designated preceding
vehicle. It is not a system which allows for
careless or inattentive driving, and is not
a system which assists in poor visibility
conditions.
The driver must pay attention to their
surroundings, even when the vehicle
stops.
● Details of support provided for the
driver’s judgement
The dynamic radar cruise control deter-
mines whether the distance between the
driver’s own vehicle and a designated
preceding vehicle is within a set range. It
is not capable of making any other type
of judgement. Therefore, it is absolutely
necessary for the driver to remain vigi-
lant and to determine whether or not
there is a possibility of danger.
● Details of support provided for the
driver’s operation
279
4
4-5. Using the driving support systems
Driving
WARNING
The dynamic radar cruise control does
not include functions which will prevent
or avoid collisions with vehicles ahead of
your vehicle. Therefore, if there is ever
any possibility of danger, the driver must
take immediate and direct control of the
vehicle and act appropriately in order to
ensure safety.
■ Situations in which the dynamic radar
cruise control should not be used
Do not use the dynamic radar cruise
control in the following situations. As the
system will not be able to provide appro-
priate control, using it may lead to an
accident resulting in death or serious
injury.
● Roads where there are pedestrians,
cyclists, etc.
● When driving on a highway or
expressway entrance or exit
● When the approach warning sounds
frequently
● Situations in which the sensors may not
operate properly: P.238
● Situations in which the lane may not be
detected: P.239
280
4-5. Using the driving support systems
Constant speed cruising:
When there are no vehicles ahead
The vehicle drives at the speed set by the driver.
If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display
will blink and a buzzer will sound.
Deceleration and follow-up cruising
When a preceding vehicle driving slower than the set vehicle speed is detected
When a vehicle is detected driving ahead of your vehicle, the vehicle automatically decel-
erates and if a greater reduction in vehicle speed is necessary, the brakes are applied (the
stop lights will come on at this time). The vehicle is controlled to maintain the vehicle-to-
vehicle distance set by the driver, in accordance with changes in the speed of the preced-
ing vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicle
ahead, the approach warning will sound.
Acceleration
When there are no longer any preceding vehicles driving slower than the set
vehicle speed
The vehicle accelerates until the set vehicle speed is reached and then resumes constant
speed cruising.
Starting off:
Basic functions
A
B
C
D
281
4
4-5. Using the driving support systems
Driving
If a preceding vehicle stops, the vehicle will also stop (controlled stop). After the
preceding vehicle starts off, pressing the “RES” switch or depressing the accelera-
tor pedal will resume follow-up cruising (start off operation). If a start off operation
is not performed, the controlled stop will continue.
Vehicles with LCA: While driving on a highway or expressway, if a preceding vehi-
cle stops, your vehicle will stop accordingly. On some highways and expressways,
if the system determines that the preceding vehicle starts off within approximately
3 minutes of stopping, a buzzer will sound and a message will be displayed on the
multi-information display to notify the driver, and your vehicle will start off accord-
ingly following the preceding vehicle. (Extended resume time)
■ Meter display
Multi-information display
Set vehicle speed
Indicators
■ Switches
Vehicles without a head-up display
Driving assist mode select switch
Driving assist switch
“+” switch/“RES” switch
“-” switch
Cancel switch
Vehicle-to-vehicle distance switch
Vehicles with a head-up display
The function of each switch differs
System components
A
B
C
A
B
C
D
E
F
A
282
4-5. Using the driving support systems
depending on the conditions and
settings.
When a switch is touched, the function of
each switch is displayed on the head-up
display. If the head-up display is off, the
functions will be displayed on the multi-
information display.
Driving assist mode select switch
Driving assist switch
“RES” switch
“+” switch
“-” switch
Vehicle-to-vehicle distance switch
Cancel switch
■ Setting the vehicle speed
1 Press the driving assist mode select
switch to select dynamic radar
cruise control.
The dynamic radar cruise control indicator
will illuminate.
Vehicles without a head-up display
Vehicles with a head-up display
2 Using the accelerator pedal, accel-
erate or decelerate to the desired
vehicle speed (approximately 30
km/h [20 mph] or more), and press
the driving assist switch to set the
set vehicle speed.
The set vehicle speed will be displayed on
the multi-information display.
The vehicle speed at the moment the
switch is released will be the set vehicle
speed.
Vehicles without a head-up display
Using the dynamic radar cruise
control
B
C
D
E
F
G
H
283
4
4-5. Using the driving support systems
Driving
Vehicles with a head-up display
■ Adjusting the set vehicle speed
Adjusting the set vehicle speed
using the switches
To change the set vehicle speed, press
the “+” switch or “-” switch until the
desired speed is displayed.
Vehicles without a head-up display
Vehicles with a head-up display
1 Increase set vehicle speed
2 Decrease set vehicle speed
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
Short press adjustment: By 1 km/h (0.6
mph) or 1 mph (1.6 km/h) each time the
switch is pressed
Long press adjustment: Increases or
decreases in 5 km/h (3.1 mph) or 5 mph (8
km/h) increments continuously while the
switch is pressed and held
The set vehicle speed adjustment incre-
ment can be changed through a customize
setting.
Increasing the set vehicle speed
using the accelerator pedal
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
(If the vehicle has been stopped by system
control, depressing the brake pedal will not
cancel control.)
284
4-5. Using the driving support systems
Vehicles without a head-up display
Vehicles with a head-up display
2 Press the “RES” switch to resume
control.
■ Changing the vehicle-to-vehicle
distance
Each time the switch is pressed, the
vehicle-to-vehicle distance setting will
change as follows:
If a preceding vehicle is detected, the
preceding vehicle mark will be dis-
played.
Vehicles without a head-up display
Vehicles with a head-up display
A
Illustra-
tion
Number
Vehicle-
to-vehicle
distance
Approximate Dis-
tance (Vehicle
Speed: 100 km/h
[60 mph])
1 Extra long
Approximately 60
m (200 ft.)
2 Long
Approximately 45
m (145 ft.)
285
4
4-5. Using the driving support systems
Driving
The actual vehicle-to-vehicle distance var-
ies in accordance with the vehicle speed.
Also, when the vehicle is stopped by sys-
tem control, it will be stopped at a certain
distance from the preceding vehicle,
depending on the situation, regardless of
the setting.
■ Operating conditions
● The D shift position is selected.
● The desired set speed can be set when
the vehicle speed is approximately 30
km/h (20 mph) or more.
• If the vehicle speed is set while driving at
below approximately 30 km/h (20 mph),
the set vehicle speed will be approxi-
mately 30 km/h (20 mph).
• If the vehicle speed is set while driving at
a speed that exceeds the system’s upper
limit, the set vehicle speed will be the sys-
tem’s upper limit.
■ Accelerating after setting the vehicle
speed
As with normal driving, acceleration can be
performed by depressing the accelerator
pedal. After accelerating, the vehicle will
return to the set vehicle speed. However,
while in vehicle-to-vehicle distance control
mode, the vehicle speed may decrease to
below the set vehicle speed in order to
maintain the distance from the preceding
vehicle.
■ When the vehicle is stopped by system
control during follow-up cruising
● When the “RES” switch is pressed while
the vehicle is stopped by system control,
if the preceding vehicle starts off within
approximately 3 seconds, follow-up
cruising will resume.
● If the preceding vehicle starts off within
approximately 3 seconds of the vehicle
being stopped by system control, follow-
up cruising will resume.
■ Automatic cancellation of vehicle-to-
vehicle distance control mode
In the following situations, vehicle-to-vehi-
cle distance control mode will be canceled
automatically:
● When the brake control or output
restriction control of a driving support
system operates
(For example: Pre-Collision System,
drive-start control)
● When the parking brake has been oper-
ated
● When the vehicle is stopped by system
control on a steep incline
● When any of the following are detected
while the vehicle is stopped by system
control:
• The driver’s seat belt is unfastened
• The driver’s door is opened
• Approximately 3 minutes have elapsed
since the vehicle was stopped
The parking brake may be actived automat-
ically.
● Situations in which some or all of the
functions of the system cannot operate:
P.239
■ Dynamic radar cruise control system
warning messages and buzzers
For safe use: P.230
■ Preceding vehicles that the sensor may
not detect correctly
In the following situations, depending on the
conditions, if the system cannot provide suf-
ficient deceleration or acceleration is nec-
essary, operate the brake pedal or
accelerator pedal.
As the sensor may not be able to correctly
detect these types of vehicles, the approach
warning (P.286) may not operate.
3 Medium
Approximately 30
m (100 ft.)
4 Short
Approximately 25
m (85 ft.)
Illustra-
tion
Number
Vehicle-
to-vehicle
distance
Approximate Dis-
tance (Vehicle
Speed: 100 km/h
[60 mph])
286
4-5. Using the driving support systems
● When a vehicle cuts in front of your vehi-
cle or changes lanes away from your
vehicle extremely slowly or quickly
● When changing lanes
● When a preceding vehicle is driving at a
low speed
● When a vehicle is stopped in the same
lane as the vehicle
● When a motorcycle is traveling in the
same lane as the vehicle
■ Conditions under which the system may
not operate correctly
In the following situations, operate the
brake pedal (or accelerator pedal, depend-
ing on the situation) as necessary.
As the sensor may not be able to correctly
detect a vehicle, the system may not oper-
ate properly.
● When a preceding vehicle brakes sud-
denly
● When changing lanes at low speeds,
such as in a traffic jam
■ Conditions for extended resume time
(Vehicles with LCA)
Extended resume time is activated when all
of the following conditions are satisfied:
● The connected service that Lexus pro-
vides is subscribed to. Contact any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
● The vehicle is driving on a vehicle-only
road, such as an expressway.
● There is a preceding vehicle and the sys-
tem is able to detect it.
● No vehicle interruptions occur.
● The preceding vehicle has not been
replaced.
● Clearance sonar and FCTA are not
detecting the object in front of you.
● The driver monitor judges that the driver
is looking forward.
● The steering wheel has not been oper-
ated.
● The brake pedal has not been operated.
In situations where the vehicle
approaches a preceding vehicle and
the system cannot provide sufficient
deceleration, such as if a vehicle cuts in
front of the vehicle, a warning display
will flash and a buzzer will sound to
alert the driver. Depress the brake
pedal to ensure appropriate vehicle-
to-vehicle distance.
■ Warnings may not occur when
In the following situations, the warning
may not operate even though the vehi-
cle-to-vehicle distance is short.
When the preceding vehicle is trav-
eling at the same speed or faster
than your vehicle
When the preceding vehicle is trav-
eling at an extremely low speed
Immediately after the vehicle speed
has been set
When the accelerator pedal is
depressed
When a curve is detected, the vehicle
speed will begin being reduced. When
the curve ends, the vehicle speed
reduction will end.
Depending on the situation, the vehicle
speed will then return to the set vehicle
speed.
In situations where vehicle-to-vehicle dis-
tance control needs to operate, such as
when a preceding vehicle cuts in front of
Approach warning
Curve speed reduction function
287
4
4-5. Using the driving support systems
Driving
your vehicle, the curve speed reduction
function will be canceled.
■ Situations in which the curve speed
reduction function may not operate
In situations such as the following, the curve
speed reduction function may not operate:
● When the vehicle is being driven around
a gentle curve
● When the accelerator pedal is being
depressed
● When the vehicle is being driven around
an extremely short curve
If a detected vehicle in the passing lane
is traveling slower than your vehicle,
overtaking will be suppressed.
The overtaking prevention function will not
operate if the passing lane is congested or
vehicles are traveling at low speeds.
This function is not available for vehicles
without a DCM.
While a warning of the driver monitor
is being displayed, the vehicle acceler-
ation will be restrained.
When the warning of the driver monitor
disappears, the restrained acceleration
control will end.
If your vehicle is being driven at
approximately 80 km/h (50 mph) or
more and a lane change to the passing
lane is performed, when the turn signal
lever is operated and the lane is
changed, the vehicle will accelerate up
to the set speed to assist in overtaking.
For vehicles with a DCM: The system’s
recognition of which lane is the passing
lane is determined by location information
and the driving condition of surrounding
vehicles. The support for lane change func-
tion and overtaking prevention function
may not operate if it is difficult to obtain
location information or there are few sur-
rounding vehicles.
For vehicles without a DCM: The system’s
recognition of which lane is the passing
lane may be based solely on the location of
the steering wheel in the vehicle (left-hand
drive/right-hand drive). If the vehicle is
driven in a location where the passing lane
is on the opposite side of that where the
vehicle was originally sold, the vehicle may
accelerate when the turn signal lever is
operated away from the passing lane. (e.g.
The vehicle was manufactured to be driven
on roads for right-hand drive vehicles [that
overtake on the right], but is being used on
roads for left-hand drive vehicles [that
overtake on the left]. In this case, the vehi-
cle may accelerate when the turn signal
lever is operated to the right.)
If your vehicle is being driven at approxi-
mately 80 km/h (50 mph) or more and
the lane is changed to that with a vehicle
traveling slower than your vehicle, when
the turn signal lever is operated the vehicle
Overtaking prevention function
Driver Monitor support function
Support for lane change
288
4-5. Using the driving support systems
will gradually decelerate to assist in chang-
ing lanes.
When RSA function is enabled and the
dynamic radar cruise control system is
operating, if a speed limit sign is
detected, the detected speed limit will
be displayed with an up/down arrow.
The set speed can be
increased/reduced to the detected
speed limit by pressing and holding the
“+” switch or “-” switch.
■ When the set speed is lower than
the detected speed limit
Vehicles without a head-up display
Vehicles with a head-up display
Press and hold the “+” switch.
■ When the set speed is higher than
the detected speed limit
Vehicles without a head-up display
Vehicles with a head-up display
Press and hold the “-” switch.
■ The dynamic radar cruise control with
road sign assist may not operate prop-
erly when
As the dynamic radar cruise control with
road sign assist may not operate properly in
situations where the RSA may not operate
or cannot detect signs correctly (P.260),
when using this function, make sure to con-
firm the actual speed limit.
In the following situations, the set speed
may not change to the detected speed limit
by pressing and holding the “+” switch or “-”
switch:
● When speed limit information is not avail-
able
● When the detected speed limit is the
same as the set speed
● When the detected speed limit is outside
Dynamic Radar Cruise Control
with Road Sign Assist
289
4
4-5. Using the driving support systems
Driving
of the speed range which the dynamic
radar cruise control system can operate
The settings of Dynamic radar cruise
control can be changed through cus-
tomize settings. (P.564)
The operating state of Dynamic radar cruise control is indicated.
Changing Dynamic radar cruise
control settings
Display and system operation state
Indicator Multi-information display Situation
White
Vehicle-to-vehicle
distance setting: Gray
Dynamic radar cruise
control being OFF
Green
Vehicle-to-vehicle
distance setting: Blue
Set vehicle speed:
Green
Constant speed cruis-
ing
Green
Vehicle-to-vehicle
distance setting: Blue
Set vehicle speed:
Green
Preceding vehicle:
White
Follow-up cruising
290
4-5. Using the driving support systems
Green
Vehicle-to-vehicle
distance setting:
Orange flashing
Set vehicle speed:
Green
Preceding vehicle:
Orange flashing
Approach warning
Green
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
White
Preceding vehicle:
Gray
Accelerating with the
accelerator pedal
Green
Set vehicle speed:
Green in reverse dis-
play
Set vehicle speed
being exceeded
Green
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
White
Preceding vehicle:
Gray
Vehicle in controlled
stop
Indicator Multi-information display Situation
291
4
4-5. Using the driving support systems
Driving
■ Meter display
Set vehicle speed
Cruise control indicator
■ Switches
Vehicles without a head-up display
Driving assist mode select switch
Driving assist switch
“+” switch / “RES” switch
“-” switch
Cancel switch
Cruise control
The vehicle can be driven at a set
speed even if the accelerator pedal
is not depressed.
Use the cruise control only on high-
ways and expressways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Therefore, do not
overly rely on this system. The driver is
solely responsible for paying attention
to the vehicle’s surroundings and driv-
ing safely.
● Set the speed appropriately according
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for confirm-
ing the set speed.
■ Situations in which cruise control
should not be used
Do not use the cruise control in the fol-
lowing situations. As the system will not
be able to provide appropriate control,
using it may lead to an accident resulting
in death or serious injury.
● On roads with sharp bends
● On winding roads
● On slippery roads, such as those cov-
ered with rain, ice or snow
● On steep downhills, or where there
are sudden changes between sharp up
and down gradients
Vehicle speed may exceed the set speed
when driving down a steep hill.
● When it is necessary to disable the sys-
tem: P.233
System Components
A
B
A
B
C
D
E
292
4-5. Using the driving support systems
Vehicles with a head-up display
The function of each switch differs
depending on the conditions and
settings.
When a switch is touched, the function of
each switch is displayed on the head-up
display. If the head-up display is off, the
functions will be displayed on the multi-
information display.
Driving assist mode select switch
Driving assist switch
“RES” switch
“-” switch
Cancel switch
“+” switch
■ Setting the vehicle speed
1 Press the driving assist mode select
switch to select cruise control.
The cruise control indicator will illuminate.
Vehicles without a head-up display
Vehicles with a head-up display
2 Using the accelerator pedal, accel-
erate to the desired vehicle speed
(approximately 30 km/h [20 mph]
or more), and press the driving
assist switch to set the set vehicle
speed.
The vehicle speed at the moment the
switch is released will be the set vehicle
speed.
A
B
C
D
E
F
G
Using the cruise control
293
4
4-5. Using the driving support systems
Driving
Vehicles without a head-up display
Vehicles with a head-up display
■ Adjusting the set vehicle speed
Adjusting the set vehicle speed
using the switches
To change the set vehicle speed, press the
“+” or “-” switch until the desired speed is
displayed.
Vehicles without a head-up display
Vehicles with a head-up display
1 Increase set vehicle speed
2 Decrease set vehicle speed
The set vehicle speed will increase or
decrease as follows:
Fine adjustment: By 1 km/h (0.6 mph) or 1
mph (1.6 km/h) each time the switch is
pressed
Large adjustment: Increases continuously
while the switch is pressed and held
Increasing the set vehicle speed
using the accelerator pedal
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
294
4-5. Using the driving support systems
Vehicles without a head-up display
Vehicles with a head-up display
2 Press the “RES” switch to resume
control.
■ Automatic cancellation of the cruise
control
In the following situations, the cruise control
will be canceled automatically:
● When the vehicle speed drops approxi-
mately 16 km/h (10 mph) or more below
the set vehicle speed
● When the vehicle speed drops below
approximately 30 km/h (20 mph)
● When the brake control or output
restriction control of a driving support
system operates (For example: PCS,
drive-start control)
● When the parking brake has been oper-
ated
● Situations in which some or all of the
functions of the system cannot operate:
P.239
The operating state of cruise control is indicated.
Display and system operation state
Indicator Multi-information display Situation
White
Blank
Cruise control being
OFF
295
4
4-5. Using the driving support systems
Driving
Green
Set vehicle speed:
Green
Constant speed cruis-
ing
Green
Set vehicle speed:
Green in reverse dis-
play
Set vehicle speed
being exceeded
Indicator Multi-information display Situation
296
4-5. Using the driving support systems
Operation of this system is separated
into 4 control states. Through control
state “warning phase 1” and “warning
phase 2”, the system determines if the
driver is aware and responsive while
outputting a warning and controlling
Emergency Driving Stop
System
The emergency driving stop system
is a system which automatically
decelerates and stops the vehicle
within its lane if the driver becomes
unable to continue driving the vehi-
cle, such as if they have suffered a
medical emergency, etc.
During LTA (Lane Tracing Assist)
control, if the system does not
detect driving operations, such as if
the driver is not holding the steer-
ing wheel, and determines the
driver is not responsive, the vehicle
will be decelerated and stopped
within its current lane to help avoid
a collision or reduce the impact of a
collision.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Pay careful attention
to the surrounding conditions in order
to ensure safe driving. The emergency
driving stop system is designed to pro-
vide support in an emergency where it
is difficult for the driver to continue
driving, such as if they have had a med-
ical emergency. It is not designed to
support driving while drowsy or in
poor physical health, or inattentive
driving.
● Although the emergency driving stop
system is designed to decelerate the
vehicle within its lane to help avoid or
help reduce the impact of a collision if
the system determines that it is difficult
for the driver to continue driving, its
effectiveness may change according
to various conditions. Therefore, it may
not always be able to achieve the same
level of performance. Also, if the oper-
ating conditions are not met, this func-
tion will not operate.
● After the emergency driving stop sys-
tem operates, if driving becomes pos-
sible again, immediately begin driving
again or, if necessary, park the vehicle
on the shoulder of the road and set a
warning reflector and flare to warn
other drivers of your stopped vehicle.
● After this system operates, passengers
should attend to the driver as neces-
sary and take appropriate hazard pre-
vention measures, such as moving to a
place where safety can be ensured,
such as the shoulder of the road or
behind a guardrail.
● This system detects the condition of
the driver through the operation of the
steering wheel. This system may oper-
ate if the driver is aware but intention-
ally and continuously does not operate
the vehicle. Also, the system may not
operate if it cannot determine that the
driver is not responsive, such as if they
are leaning on the steering wheel.
● Situations in which the driver monitor
may not operate properly: P.240
Summary of the system
297
4
4-5. Using the driving support systems
Driving
the vehicle speed. If the system deter-
mines the driver is not responsive, it will
operate in control state “deceleration
stop phase” and “stop hold phase” and
decelerate and stop the vehicle. It will
then operate continuously in “stop hold
phase”.
■ Operating conditions
This system operates when all of the follow-
ing conditions are met:
● When the LTA is on
● When the vehicle speed is approximately
50 km/h (30 mph) or more
■ Operation cancelation conditions
In the following situations, system operation
will be canceled:
● When LTA control has been canceled
(the LTA switch has been pressed, etc.)
● When the dynamic radar cruise control
has been canceled
● When driver operations are detected
(the steering wheel is held, the brake
pedal, accelerator pedal, parking brake,
emergency flasher switch, or turn signal
lever is operated)
● When the driving assist switch is pressed
while in the stop and hold phase
● When the power switch has been turned
from ON to off
● Situations in which some or all of the
functions of the system cannot operate:
P.239
■ LTA control when operation is canceled
When emergency driving stop system
operation is canceled, LTA control may
also be canceled.
If driving operations are not detected
after the hands off steering wheel
warning operates, a buzzer will sound
intermittently and a message will be
displayed to warn the driver, and the
system will judge if the driver is respon-
sive or not. If driving operations, such
as holding the steering wheel, are not
performed within a certain amount of
time, the system will enter warning
phase 2.
Depending on the type of detection of
the driver’s unresponsiveness, the sys-
tem may skip warning phase 1 and start
the control of warning phase 2.
After entering warning phase 2, a
buzzer will sound in short intervals and
a message will be displayed to warn
the driver, and the vehicle will slowly
decelerate. If driving operations, such
as holding the steering wheel, are not
performed within a certain amount of
time, the system will determine that the
driver is not responsive and enter the
deceleration stop phase.
The audio system will be muted until the
driver becomes responsive.
When the vehicle is decelerating, the
brake lights may illuminate, depending on
the road conditions, etc.
After the vehicle has decelerated a certain
amount, the emergency flashers (hazard
lights) will flash.
After the driver is judged as being not
responsive, a buzzer will sound contin-
uously and a message will be displayed
Warning phase 1
Warning phase 2
Deceleration stop phase
298
4-5. Using the driving support systems
to warn the driver, and the vehicle will
slowly decelerate and stop. While the
vehicle is decelerating, the emergency
flashers (hazard lights) will flash to
warn other drivers of the emergency.
After the vehicle is stopped, the park-
ing brake will be applied automatically.
After entering the stop and hold phase,
the buzzer will continue sounding con-
tinuously, the emergency flashers (haz-
ard lights) will flash to warn other
drivers of the emergency, and the
doors will unlock.
■ Restricted functions after the
operation is canceled
After shifting to the deceleration stop
phase, the following functions will not
be available until the engine is
restarted even though the emergency
driving stop system is canceled:
LTA
LCA (if equipped)
■ Meter display
Set vehicle speed
Speed limiter indicator
Stop hold phase
Speed limiter
A desired maximum speed can be
set using the speed limiter switch.
The speed limiter prevents the
vehicle speed from exceeding the
set speed.
WARNING
■ Situations in which speed limiter
should not be used
● Situations in which the sensors may not
operate properly: P.238
● When it is necessary to disable the sys-
tem: P.233
System Components
A
B
299
4
4-5. Using the driving support systems
Driving
■ Switches
Vehicles without a head-up display
Driving assist mode select switch
Driving assist switch
“+” switch / “RES” switch
“-” switch
Cancel switch
Vehicles with a head-up display
The function of each switch differs
depending on the conditions and
settings.
When a switch is touched, the function of
each switch is displayed on the head-up
display. If the head-up display is off, the
functions will be displayed on the multi-
information display.
Driving assist mode select switch
Driving assist switch
“RES” switch
“-” switch
Cancel switch
“+” switch
■ Setting the maximum vehicle
speed
1 Press the driving assist mode select
switch to select the speed limiter.
The speed limiter indicator will illuminate in
white.
Vehicles without a head-up display
A
B
C
D
E
A
Using the speed limiter
B
C
D
E
F
G
300
4-5. Using the driving support systems
Vehicles with a head-up display
2 Accelerate or decelerate to the
desired vehicle speed, and press
the driving assist switch to set the
maximum vehicle speed.
The speed limiter indicator will change
from illuminated in white to green.
The set vehicle speed will be displayed on
the multi-information display in green.
If the vehicle speed is set while driving at
below approximately 30 km/h (20 mph),
the set vehicle speed will be set to approxi-
mately 30 km/h (20 mph).
Press the cancel switch or driving assist
switch to cancel control.
Vehicles without a head-up display
Vehicles with a head-up display
The system does not start when the shift
position is R.
The system does not start when the driving
assist switch is pressed continuously.
■ Adjusting the set vehicle speed
To change the set vehicle speed, press
the “+” or “-” switch until the desired
speed is displayed.
Vehicles without a head-up display
Vehicles with a head-up display
1 Increase set vehicle speed
301
4
4-5. Using the driving support systems
Driving
2 Decrease set vehicle speed
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
Short press adjustment: By 1 km/h (0.6
mph) or 1 mph (1.6 km/h) each time the
switch is pressed
Long press adjustment: Increases or
decreases in 5 km/h (3.1 mph) or 5 mph (8
km/h) increments continuously while the
switch is pressed and held
The set vehicle speed adjustment incre-
ment can be changed through a customize
setting.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Vehicles without a head-up display
Vehicles with a head-up display
2 Press the “RES” switch to resume
control.
When control is canceled, the speed lim-
iter indicator will change from illuminated
in green to white.
■ Exceeding the set speed
In the following situations, if the vehicle
speed exceeds the set vehicle speed, the
displayed set vehicle speed will flash:
● When the accelerator pedal is deeply
depressed
● When driving down a slope
■ Automatic cancellation of the speed
limiter
● Situations in which some or all of the
functions of the system cannot operate:
P.239
■ Changes in brake operation sound and
pedal response
P.239
When RSA function is enabled and the
speed limiter is operating, if a speed
limit sign is detected, the detected
speed limit will be displayed with an
up/down arrow. The set vehicle speed
can be increased/reduced to the
detected speed limit by pressing and
holding the “+” or “-” switch.
Speed limiter with Road Sign
Assist
302
4-5. Using the driving support systems
■ When the set vehicle speed is
lower than the detected speed
limit
Vehicles without a head-up display
Vehicles with a head-up display
Press and hold the “+” switch.
■ When the set vehicle speed is
higher than the detected speed
limit
Vehicles without a head-up display
Vehicles with a head-up display
Press and hold the “-” switch.
■ The speed limiter with road sign assist
may not operate properly when
As the speed limiter with road sign assist
may not operate properly in situations
where the RSA may not operate or cannot
detect signs correctly (P.275), when
using this function, make sure to confirm the
actual speed limit.
In the following situations, the set speed
may not change to the detected speed limit
by pressing and holding the “+” switch or “-”
switch:
● When the detected speed limit is the
same as the set speed
● When the detected speed limit is outside
of the speed range which the speed lim-
iter system can operate
303
4
4-5. Using the driving support systems
Driving
*
: If equipped
Center Display
Turning the Blind Spot Monitor on/off.
Outside rear view mirror indicators
When a vehicle is detected in a blind spot
of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator (P.95) on the detected side
will illuminate. If the turn signal lever is
operated toward the detected side, the
outside rear view mirror indicator will flash
and a buzzer will sound.
Driving assist information indicator
Illuminates when the Blind Spot Monitor is
turned off. At this time, a message will be
displayed on the multi-information display.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Buzzer
If the volume setting of the audio system is
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ Customization
Some functions can be customized.
(P.556)
BSM (Blind Spot Monitor)
*
The Blind Spot Monitor is a system
that uses rear side radar sensors
installed on the inner side of the
rear bumper on the left and right
side to assist the driver in confirm-
ing safety when changing lanes.
WARNING
■ Cautions regarding the use of the
system
● The driver is solely responsible for safe
driving. Always drive safely, taking
care to observe your surroundings.
● The Blind Spot Monitor is a supple-
mentary function which alerts the
driver that a vehicle is in a blind spot of
the outside rear view mirrors or is
approaching rapidly from behind into
a blind spot. Do not overly rely on the
Blind Spot Monitor. As the function
cannot judge if it is safe to change
lanes, over reliance could lead to an
accident resulting in death or serious
injury. As the system may not function
correctly under certain conditions, the
driver’s own visual confirmation of
safety is necessary.
System components
WARNING
■ To ensure the system can operate
properly
Blind Spot Monitor sensors are installed
behind the left and right sides of the rear
bumper respectively. Observe the fol-
lowing to ensure the Blind Spot Monitor
can operate correctly.
A
B
C
304
4-5. Using the driving support systems
The Blind Spot Monitor can be
enabled/disabled through a custom-
ize setting. (P.556)
When the Blind Spot Monitor is off, the
driving assist information indicator
(P.95) will illuminate and a message
will be displayed on the multi-informa-
tion display.
Each time the power switch is turned to
ON, the Blind Spot Monitor is enabled.
WARNING
● Keep the sensors and the surrounding
areas on the rear bumper clean at all
times.
If a sensor or its surrounding area on
the rear bumper is dirty or covered
with snow, the Blind Spot Monitor may
not operate and a warning message
will be displayed. In this situation, clear
off the dirt or snow and drive the vehi-
cle with the operation conditions of the
BSM function (P.306) satisfied for
approximately 10 minutes. If the warn-
ing message does not disappear, have
the vehicle inspected by any autho-
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
● Do not attach accessories, stickers
(including transparent stickers), alumi-
num tape, etc. to a sensor or its sur-
rounding area on the rear bumper.
● Do not paint the surrounding area of a
sensor on the rear bumper.
● Do not subject a sensor or its sur-
rounding area on the rear bumper to a
strong impact.
If a sensor is moved even slightly off
position, the system may malfunction
and vehicles may not be detected cor-
rectly.
In the following situations, have your
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
• A sensor or its surrounding area is
subject to a strong impact.
• If the surrounding area of a sensor is
scratched or dented, or part of them
has become disconnected.
● Do not disassemble the sensor.
● Do not modify the sensor or surround-
ing area on the rear bumper.
● If a sensor or the rear bumper needs to
be removed/installed or replaced,
contact any authorized Lexus retailer
or Lexus authorized repairer, or any
reliable repairer.
● The sensors are likely to be affected by
paint on the rear bumper. If the rear
bumper is not repaired correctly, the
Blind Spot Monitor may not operate
with a warning message displayed. If
any paint repair is needed, contact any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
Turning the Blind Spot Monitor
on/off
305
4
4-5. Using the driving support systems
Driving
■ Objects that can be detected while driving
The Blind Spot Monitor uses rear side radar sensors to detect the following vehi-
cles traveling in adjacent lanes and advises the driver of the presence of such vehi-
cles via the indicators on the outside rear view mirrors.
Vehicles that are traveling in areas that are not visible using the outside rear
view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that are not visible
using the outside rear view mirrors (the blind spots)
■ Detection range while driving
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle
*1
Approximately 1 m (3.3 ft.) forward of the rear bumper
*2
Approximately 3 m (9.8 ft.) from the rear bumper
Approximately 3 m (9.8 ft.) to 70 m (230 ft.) from the rear bumper
*3
*1
: The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the vehicle
Blind Spot Monitor operation
A
B
A
B
C
D
306
4-5. Using the driving support systems
cannot be detected.
*2
: While the vehicle is to being overtaken, up to approximately 3 m (9.8 ft.) forward of the
rear bumper will be detected.
*3
: The greater the difference in speed between your vehicle and the detected vehicle is,
the farther away the vehicle will be detected, causing the outside rear view mirror indi-
cator to illuminate or flash.
■ The Blind Spot Monitor linked
function
The LDA (Lane Departure Alert) has a
function that uses information of
detected vehicles driving in an adja-
cent lane. For details about the func-
tion and its operating conditions,
P.261.
■ The Blind Spot Monitor is operational
when
The Blind Spot Monitor is operational when
all of the following conditions are met:
● The power switch is in ON.
● The Blind Spot Monitor is on.
● The shift position is in a position other
than R.
● The vehicle speed is approximately 10
km/h (7 mph) or more.
■ The Blind Spot Monitor will detect a
vehicle when
The Blind Spot Monitor will detect a vehicle
present in the detection area in the follow-
ing situations:
● A vehicle in an adjacent lane overtakes
your vehicle.
● You overtake a vehicle in an adjacent
lane slowly.
● Another vehicle enters the detection
area when it changes lanes.
■ Situations in which the Blind Spot Moni-
tor cannot detect vehicles
The Blind Spot Monitor cannot detect the
following vehicles and other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles traveling in the opposite direc-
tion
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Following vehicles that are in the same
lane
*
● Vehicles traveling 2 lanes away from
your vehicle
*
● Vehicles which are being overtaken rap-
idly by your vehicle
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Conditions in which a buzzer may not
sound
In situations such as the following, while the
turn signal lever is being operated, the indi-
cator will flash but a buzzer may not sound.
● When a second vehicle is detected while
the turn signal lever is being held
● When overtaking a vehicle in the adja-
cent lane at a much higher speed than it
*
*
: Depending on the situations, a buzzer
may sound.
■ Conditions under which the system may
not function correctly
● The Blind Spot Monitor may not detect
vehicles correctly in the following situa-
tions:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
• When driving on a wet road surface, such
307
4
4-5. Using the driving support systems
Driving
as in a puddle, while in inclement
weather, such as heavy rain, snow, fog,
etc.
• When multiple vehicles are approaching
with only a small gap between each vehi-
cle
• When the distance between your vehicle
and a following vehicle is short
• When there is a significant difference in
speed between your vehicle and the
vehicle that enters the detection area
• When the difference in speed between
your vehicle and another vehicle is
changing
• When a vehicle enters a detection area
traveling at about the same speed as your
vehicle
• As your vehicle starts from a stop, a vehi-
cle remains in the detection area
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When vehicle lanes are wide, or when
driving on the edge of a lane, and the
vehicle in an adjacent lane is far away
from your vehicle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
• When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
• Immediately after the Blind Spot Monitor
is turned on
• When towing with the vehicle
● Instances of the Blind Spot Monitor
unnecessarily detecting a vehicle and/or
object may increase in the following situ-
ations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When the distance between your vehicle
and a guardrail, wall, etc. that enters the
detection area is short
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When vehicle lanes are narrow, or when
driving on the edge of a lane, and a vehi-
cle traveling in a lane other than the adja-
cent lanes enters the detection area
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When the tires are slipping or spinning
• When the distance between your vehicle
and a following vehicle is short
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
• When towing with the vehicle
308
4-5. Using the driving support systems
*
: If equipped
Multi-information display/head-up
display (if equipped)
Notifies through message and buzzer
when your vehicle may obstruct the pass-
ing of the vehicle behind you.
Center Display
Turning the Rear Vehicle Approaching
Indication on/off.
The Rear Vehicle Approaching Indica-
tion can be enabled/disabled through
a customize setting. (P.556)
■ Buzzer
If the volume setting of the audio system is
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ Customization
Some functions can be customized.
(P.556)
On detecting a vehicle approaching
behind your vehicle using the rear side
Rear Vehicle Approaching
Indication
*
The rear vehicle approaching indi-
cation is a system that uses radar
sensors installed on the inner side
of the rear bumper. By notifying the
driver of a vehicle approaching
behind your vehicle, the system
assists the driver in judging whether
or not an evasive action should be
taken.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings.
The rear vehicle approaching indication
is a supplementary system that informs
the driver of the existence of a vehicle
approaching behind your vehicle.
As this system may not function to its full-
est extent in certain situations, the
driver’s own visual confirmation of safety
is necessary.
Over reliance on this function may lead
to an accident resulting death or serious
injury.
■ To ensure the system can operate
properly
P.303
System components
Turning the Rear Vehicle
Approaching Indication on/off
Rear Vehicle Approaching Indi-
cation operation
A
B
309
4
4-5. Using the driving support systems
Driving
radar sensors, the rear vehicle
approaching indication notifies the
driver of the existence of the vehicle
through a message on the multi-infor-
mation display or head-up display (if
equipped), and a buzzer.
■ Operating conditions of Rear Vehicle
Approaching Indication
When the following conditions are met, the
Rear Vehicle Approaching Indication will
operate:
● The power switch is in ON.
● The Rear Vehicle Approaching Indica-
tion is on.
● The shift position is in a position other
than R.
● The vehicle speed is approximately 100
km/h (63mph) or more.
● The turn signal lever is not being oper-
ated.
● The brake pedal is not depressed.
● Approximately 5 or more minutes have
elapsed since the system was operated.
■ The Rear Vehicle Approaching Indica-
tion will detect a vehicle when
The rear vehicle approaching indication
detects vehicles within the detection range
when a following vehicle driving in the same
lane is approaching.
■ Situations in which the Rear Vehicle
Approaching Indication cannot detect
vehicles
The Rear Vehicle Approaching Indication
cannot detect the following vehicles and
other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Vehicles traveling in the opposite direc-
tion
● A vehicle in an adjacent lane
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the Rear Vehicle
Approaching Indication may not oper-
ate properly
● In the following situations, the system may
not detect a following vehicle properly:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
• When driving on a wet road surface, such
as in a puddle, while in inclement
weather, such as heavy rain, snow, fog,
etc.
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When towing with the vehicle
• When the following vehicle is not
approaching from straight behind your
vehicle
• When the following vehicle is approach-
ing from an angle
• If a vehicle suddenly cuts behind your
vehicle
310
4-5. Using the driving support systems
• When your vehicle cuts in front of
another vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When a following vehicle, which
approached your vehicle then moved
away, is approaching again
• When a following vehicle is moving away
from your vehicle
• When a following vehicle is overtaking
your vehicle
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When the height of a following vehicle is
too much different from that of your vehi-
cle
● Especially in situations such as the follow-
ing, the system may operate even if it is
unlikely for a following vehicle to
approach your vehicle:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is surrounded by
other vehicles
• When making a left/right turn and a fol-
lowing vehicle passes immediately
behind your vehicle
• When a following vehicle closely
approaches your vehicle before overtak-
ing
• When a vehicle driving in an adjacent
lane is within the detection range, such as
when your vehicle is driving on a narrow
lane road or driving on the edge of a lane
• When there are more than one vehicle
around a following vehicle
• When passing through a location with a
structure above the road (traffic sign, bill-
board, etc.)
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When there is an adjacent vehicle while
on a curve
• When your vehicle cuts in front of
another vehicle
*
: If equipped
The rear side radar sensors detect fol-
lowing vehicles driving in the same
lane. If the system determines that the
possibility of a rear-end collision is
Automatic Rear Flashing
Hazard Lights
*
The Automatic Rear Flashing Haz-
ard Lights is a system that uses the
rear side radar sensors located on
the inside of the rear bumper.
When the system determines that
the possibility of a rear-end colli-
sion is high, it flashes the emer-
gency flashers rapidly to warn the
driver of the following vehicle.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings. The Auto-
matic Rear Flashing Hazard Lights is an
auxiliary system that flashes the emer-
gency flashers rapidly to warn the driver
of the following vehicle when it deter-
mines that the possibility of a rear-end
collision is high. As this system may not
function to its fullest extent in certain situ-
ations, the driver’s own visual confirma-
tion of safety is necessary. Over reliance
on this function may lead to an accident
resulting death or serious injury.
■ To ensure the system can operate
properly
P.303
Automatic Rear Flashing Haz-
ard Lights operation
311
4
4-5. Using the driving support systems
Driving
high, the emergency flashers will flash
rapidly to warn the driver of the follow-
ing vehicle. Simultaneously, a message
will be displayed on the multi-informa-
tion display to notify the driver of the
approach of the following vehicle.
■ Operating conditions of Automatic
Rear Flashing Hazard Lights
When the following conditions are met, the
Automatic Rear Flashing Hazard Lights will
operate:
● The power switch is in ON.
● The shift position is in a position other
than R.
● The turn signal lever is not being oper-
ated.
● The relative speed between your vehicle
and the following vehicle is between
approximately 30 and 100 km/h (19 and
62 mph)
● Your vehicle is being driven at approxi-
mately 10 km/h (7 mph) or less or at any
speed with the brake pedal depressed.
■ The Automatic Rear Flashing Hazard
Lights will detect a vehicle when
The Automatic Rear Flashing Hazard
Lights detects the following vehicle driving
in the same lane within the detection range,
when it determines that the possibility of a
rear-end collision with it is high.
■ Situations in which the Automatic Rear
Flashing Hazard Lights cannot detect
vehicles
The Automatic Rear Flashing Hazard
Lights cannot detect the following vehicles
and other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Vehicles traveling in the opposite direc-
tion
● A vehicle in an adjacent lane
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the Automatic Rear
Flashing Hazard Lights may not operate
properly
● In the following situations, the system may
not detect a following vehicle properly:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
• When the vehicle is stopped or driving on
a wet road surface, such as in a puddle,
while in inclement weather, such as heavy
rain, snow, fog, etc.
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When towing with the vehicle
• When the following vehicle is not
approaching from straight behind your
vehicle
• When the following vehicle is approach-
ing from an angle
• If a vehicle suddenly cuts behind your
312
4-5. Using the driving support systems
vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When a bicycle carrier or other acces-
sory is installed to the rear of your vehicle
• When the height of a following vehicle is
too much different from that of your vehi-
cle
● In the following situations, the system may
operate even though there is no possibil-
ity of a collision
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is surrounded by
other vehicles
• When your vehicle is stopped to make a
turn at an intersection, etc. and a vehicle
passes your vehicle from straight behind
• When your vehicle is stopped on the
roadside, etc. and a vehicle passes close
to the side of your vehicle
• When a following vehicle closely
approaches your vehicle before overtak-
ing
• When a following vehicle suddenly
approaches to close to your vehicle
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
*
: If equipped
Secondary Collision Brake
(Rear Impacts while
Stopped)
*
The Secondary Collision Brake
(Rear Impacts while Stopped) is a
system that uses the rear side radar
sensors located on the inside of the
rear bumper. When the system
determines that the possibility of a
rear-end collision while the vehicle
is stopped is very high, the brakes
are controlled automatically to
help reduce the possibility of fur-
ther damage due to a secondary
collision.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings. The Sec-
ondary Collision Brake (Rear Impacts
while Stopped) is an auxiliary system that
controls the brakes automatically when it
determines that the possibility of a rear-
end collision with the following vehicle
driving in the same lane is very high while
the vehicle is stopped. As the Secondary
Collision Brake (Rear Impacts while
Stopped) may not function to its fullest
extent in certain situations, the driver’s
own visual confirmation of safety is nec-
essary. Over reliance on this function
may lead to an accident resulting death
or serious injury.
■ To ensure the system can operate
properly
P.303
313
4
4-5. Using the driving support systems
Driving
With the Secondary Collision Brake
(Rear Impacts while Stopped), the rear
side radar sensors detect a following
vehicle driving in the same lane while
the vehicle is stopped. If the system
determines that the possibility of a
rear-end collision is very high, the
brakes and brake lights will be auto-
matically controlled to reduce the vehi-
cle speed after the rear-end collision
and help reduce the possibility of fur-
ther damage due to a secondary colli-
sion.
■ Operating conditions of Secondary
Collision Brake (Rear Impacts while
Stopped)
When the following conditions are met, the
Secondary Collision Brake (Rear Impacts
while Stopped) will operate:
● The power switch is in ON.
● The shift position is in a position other
than R.
*
● The turn signal lever is not being oper-
ated.
● Approximately 7 or more minutes have
elapsed since the system was operated.
● The relative speed between your vehicle
and the following vehicle is between
approximately 30 and 100 km/h (19 and
62 mph)
● The vehicle speed is approximately 0
km/h (0 mph).
*
: When the N shift position is selected, the
system is not operational when none of
the brake pedal, parking brake, and
brake hold system are operated.
■ The Secondary Collision Brake (Rear
Impacts while Stopped) will detect a
vehicle when
The Secondary Collision Brake (Rear
Impacts while Stopped) detects the follow-
ing vehicle driving in the same lane within
the detection range, when it determines
that the possibility of a rear-end collision
with it is very high.
■ Situations in which the Secondary Colli-
sion Brake (Rear Impacts while
Stopped) cannot detect vehicles
The Secondary Collision Brake (Rear
Impacts while Stopped) cannot detect the
following vehicles and other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Vehicles traveling in the opposite direc-
tion
● A vehicle in an adjacent lane
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
Secondary Collision Brake
(Rear Impacts while Stopped)
operation
314
4-5. Using the driving support systems
■ Situations in which the Secondary Colli-
sion Brake (Rear Impacts while
Stopped) may not operate properly
● In the following situations, the system may
not detect a following vehicle properly:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
• When the vehicle is stopped on a wet
road surface, such as in a puddle, while in
inclement weather, such as heavy rain,
snow, fog, etc.
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When towing with the vehicle
• When a following vehicle approaches
immediately after your vehicle is stopped
• When the following vehicle is not
approaching from straight behind your
vehicle
• When the following vehicle is approach-
ing from an angle
• If a vehicle suddenly cuts behind your
vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When the height of a following vehicle is
too much different from that of your vehi-
cle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
● Especially in situations such as the follow-
ing, the system may operate even though
there is no possibility of a collision:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is stopped to make a
turn at an intersection, etc. and a vehicle
passes your vehicle from straight behind
• When the vehicle is stopped at a road-
side, etc. and another vehicle passes right
next to your vehicle
• When a following vehicle closely
approaches your vehicle before overtak-
ing
• When a following vehicle suddenly
approaches close to your vehicle
• When your vehicle is surrounded by
other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When a following vehicle approaches
immediately before stopping or immedi-
ately after starting off
• When braked on a slippery road, etc.,
locking your tires, and a following vehicle
approaches
• When the vehicle is washed in a car wash
machine
315
4
4-5. Using the driving support systems
Driving
*
: If equipped
Center Display
Turning the safe exit assist on/off.
Outside rear view mirror indicators
When a vehicle or bicycle which may col-
lide with a door (other than the back door)
when opened is detected, the outside rear
view mirror indicator (P.95) on the
detected side will illuminate. If the door on
the detected side is open, or opening of the
door is canceled, the outside rear view
mirror indicator will blink.
Multi-information display
If collision with a door is likely and the door
is opened or opening of the door is can-
celed, the door will be displayed on the
multi-information display. Also, if a door is
opened when an outside rear view mirror
indicator is illuminated, a buzzer will sound
as a warning.
Driving assist information indicator
Illuminates when the safe exit assist is
turned off. At this time, a message will be
displayed on the multi-information display.
Speakers
When the outside rear view mirror indica-
tor blinks, the driver is informed through
voice guidance that the system has oper-
ated. After the notification through voice
guidance is made, no more voice guidance
Safe Exit Assist
*
The safe exit assist (with door open-
ing control) is a system that uses
rear side radar sensors installed on
the inner side of the rear bumper to
help occupants judge if an
approaching vehicle or bicycle may
collide with a door when exiting or
cancel opening of a door, to help
reduce the possibility of a collision.
WARNING
■ Cautions regarding the use of the
system
● The driver is solely responsible for safe
driving. Always drive safely, taking
care to observe your surroundings.
● The safe exit assist is a supplementary
system that, when the vehicle is
stopped, informs occupants of the
existence of approaching vehicles and
bicycles. As this system alone cannot
be used to judge safety, over-reliance
on this system may lead to an accident
resulting in death or serious injury.
In certain situations, this system may not
function to its fullest extent. Therefore it is
necessary for the occupants to visually
check for safety directly and using the
mirrors.
System components
A
B
C
D
E
316
4-5. Using the driving support systems
notifications will be made again until the
door is fully closed.
Door opener switch (manual
release handle)
If a door opener switch is operated to open
a door while the outside rear view mirror
indicator on that side is illuminated and the
system determines that the possibility of
the door or an exiting occupant colliding
with a vehicle or bicycle is high, opening of
the door will be canceled.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Buzzer
If the volume setting of the audio system is
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ Voice notifications
In the following situations, voice notifica-
tions will not be output:
● When it is estimated that no occupants
are on board
*
● After opening a door and entering the
vehicle, until the hybrid system is started
● When 3 minutes or more have elapsed
since the hybrid system was stopped
● When the language setting of the Center
Display has been set to a language that
does not support voice notifications
● When all of the doors have been locked
from outside the vehicle
● When a door remains open for 1 minute
or more after the hybrid system is
stopped
● When the ACC mode (P.556) has
been enabled through a customize set-
ting on the Center Display and the hybrid
system has been stopped
● When the parking assist volume setting
on the Center Display has been set to off
*
: For each seating position, judgment is
made based on the opening and closing
of a door, before driving for ingress and
after driving for egress.
■ Opening of a door can be canceled
when
Opening of a door can be canceled only
when the inside door opener switch is
pushed in. Opening of a door will not be
able to be canceled when the outside door
opener switch is used.
■ Customization
Some functions can be customized.
(P.556)
The safe exit assist system can be
enabled/disabled through a custom-
ize setting. (P.556)
When the safe exit assist is off, the driv-
ing assist information indicator will illu-
minate and a message will be displayed
on the multi-information display.
Each time the power switch is turned to
ON, the safe exit assist is enabled.
*
*
: When the power switch is turned off and
then to ON immediately after that, the
safe exit assist may not be enabled.
F
WARNING
■ To ensure the system can operate
properly
P.303
Turning the safe exit assist sys-
tem ON/OFF
317
4
4-5. Using the driving support systems
Driving
■ Objects that can be detected by the safe exit assist
When the safe exit assist detects the following vehicles or bicycles behind your
vehicle using a rear side radar sensor, the occupants of the vehicle are informed
through an outside rear view mirror indicator, buzzer, multi-information display,
and voice notification.
Vehicle or bicycle which has a high possibility of colliding with a door (other
than the back door) when opened
■ The safe exit assist detection areas
The areas that vehicles can be detected in are outlined below.
Approximately 45 m (145 ft.) rearward from the front door
*
*
: The faster a vehicle or bicycle is approaching, the distance at which an outside rear view
mirror indicator will illuminate or blink will become further.
■ The safe exit assist is operational when
The safe exit assist is operational when all of
the following conditions are met:
● When the power switch is ON, less than
3 minutes have elapsed since the hybrid
system was off, or less than 3 minutes
have elapsed since a door was opened
and someone has entered the vehicle
(the time which operation is possible may
be extended if a door is opened and
closed)
● Safe exit assist is on
● The vehicle is stopped.
Safe exit assist operation
A
A
318
4-5. Using the driving support systems
● The shift position is in a position other
than R.
■ The safe exit assist will detect a vehicle
when
The safe exit assist will detect a vehicle
present in the detection area in the follow-
ing situations:
● When the vehicle is stopped and a vehi-
cle or bicycle, which is traveling parallel
to the vehicle, is approaching within the
area that a door opens (other than the
back door)
■ Conditions under which the system will
not detect a vehicle
● Safe exit assist does not detect the fol-
lowing objects, vehicles, and bicycles:
• Vehicles or bicycles which are approach-
ing slowly
*
• Vehicles or bicycles which are deter-
mined to have a low possibility of collid-
ing with a door (other than the back
door) when opened
*
• Vehicles or bicycles which are approach-
ing from directly behind
*
• Vehicles or bicycles which are approach-
ing from the front
*
• Guardrails, walls, signs, parked vehicles,
and other stationary objects
*
• Pedestrians, animals, etc.
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
● In situations such as the following, safe
exit assist will not operate:
• When 3 minutes or more have elapsed
since the hybrid system off (the time
which operation is possible may be
extended if a door is opened and closed)
• When your vehicle is not completely
stopped
■ Opening the doors when opening is
canceled by the system
Perform the following operation to open a
door.
After the approaching vehicle or bicycle
passes or changes direction, check the sur-
rounding area and press the inside door
opener switch again. Perform the following
only in an emergency, etc., to open a door
while the warning is operating, after check-
ing the safety of the area around your vehi-
cle.
● Press and hold an inside door opener
switch for approximately 3 seconds or
more
● Press an inside door opener switch
quickly 3 times or more
● Pull a manual release handle
■ Conditions under which the system may
not function correctly
● The safe exit assist may not detect vehi-
cles correctly in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the rear bumper
• When the vehicle is stopped on a wet
road surface, such as in a puddle, while in
inclement weather, such as heavy rain,
snow, fog, etc.
• When a vehicle or bicycle approaches
from behind a nearby parked vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• Immediately after a vehicle or bicycle
starts moving
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When the vehicle is stopped at an angle
to the road
• When a vehicle is traveling near an
approaching vehicle or bicycle
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
319
4
4-5. Using the driving support systems
Driving
a curve
● Instances of the safe exit assist unneces-
sarily detecting a vehicle and/or object
may increase in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When a vehicle or bicycle approaches
your vehicle from directly behind in an
offset position
• When the vehicle is stopped at an angle
to the road
• When a vehicle or bicycle approaches
from behind a parked vehicle at an angle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
cent lane
*
: If equipped
■ Type of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
Front side sensors (vehicles with
Advanced Park)
Rear side sensors (vehicles with
Advanced Park)
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
Lexus parking assist-sensor
*
The Lexus parking assist-sensor
function detects the approximate
distance from the vehicle and an
object such as a wall using ultra-
sonic sensors and informs the
driver with the Center Display dis-
tance display and buzzer.
System components
A
B
C
D
E
F
320
4-5. Using the driving support systems
The illustration is an example for expla-
nation and may differ depending on the
specifications.
Center Display
■ Lexus parking assist-sensor detec-
tion indicator
*
When the sensors detect an object,
Lexus parking assist-sensor detection
indicator illuminates.
*
: If equipped
■ How to check the presence of Lexus
parking assist-sensor detection indica-
tor
On vehicles with the Lexus parking assist-
sensor detection indicator, the Lexus park-
ing assist-sensor OFF indicator (P.320)
will turn off when the shift position is
changed to R while the Lexus parking
assist-sensor is disabled.
The Lexus parking assist-sensor func-
tion can be enabled/disabled through
a customize setting. (P.556)
When the Lexus parking assist-sensor
function is disabled, the Lexus parking
assist-sensor OFF indicator (P.95)
illuminates on the multi-information
display.
If the system switches to OFF (dis-
abled) and the Lexus parking assist-
sensor is stopped, the Lexus parking
assist-sensor will not be re-enabled
until ON (enabled) is selected again
from the customize setting (P.556).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
Vehicles with the Lexus parking assist-
sensor detection indicator: The system
will automatically turn on (enabled)
and the Lexus parking assist-sensor
OFF indicator will turn off if the shift
position is changed to R.
When the shift position is R, the Lexus
parking assist-sensor cannot be turned
on or off.
The setting of Lexus parking assist-
sensor itself will not change.
Turning the Lexus parking assist-
sensor function ON/OFF
WARNING
■ Cautions regarding the use of the
system
There is a limit to the degree of recogni-
tion accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
always responsible for paying attention
to the vehicle’s surroundings and driving
safely.
■ To ensure the system can operate
properly
Make sure to observe the following pre-
cautions. The system may not operate
properly and may lead to an unexpected
accident. When these precautions can-
not be observed, turn the system off.
● Do not damage the sensors, and
always keep them clean.
321
4
4-5. Using the driving support systems
Driving
■ The system can be operated when
● The power switch is in ON.
● The Lexus parking assist-sensor is on.
● The vehicle speed is less than about 10
km/h (6 mph).
● Front corner sensors:
• The shift position is in a position other
than P.
● Front center sensors:
• The shift position is in a position other
than P or R.
● Rear corner and rear center sensors:
• The shift position is in R.
● Side sensors: (vehicles with Advanced
Park)
• The vehicle is moving about 7 m (23.0 ft.)
after the hybrid system was started.
• The vehicle is moving about 7 m (23.0 ft.)
after the shift position was changed from
R to D.
• The shift position is in R.
• switch has been pressed and the
Center Display is displayed.
• The front or rear sensor detects a station-
ary object.
Vehicles with the Lexus parking assist-sen-
sor detection indicator: Even when the
Lexus parking assist-sensor is turned off
(disabled), if the shift position is changed to
R, the system will automatically turn on
(enabled) and the Lexus parking assist-sen-
sor OFF indicator will turn off.
The setting of the Lexus parking assist-sen-
sor itself will not change.
■ Sensor detection information
● The sensor’s detection areas are limited
to the areas around the vehicle’s front
and rear bumpers.
● Certain vehicle conditions and the sur-
rounding environment may affect the
ability of a sensor to correctly detect an
object.
● Objects may not be detected if they are
too close to the sensor.
● There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
object will come within the sensor’s
detection areas before the display is
shown and the warning beep sounds.
● It might be difficult to hear the buzzer due
to the volume of the audio system or air
flow noise of the air conditioning system.
● It may be difficult to hear the sound of this
system due to the buzzers of other sys-
tems.
WARNING
● Do not attach a sticker or install a com-
ponent, such as a backlit license plate
(especially fluorescent type), fog lights,
fender pole or wireless antenna near a
radar sensor.
● Do not subject the surrounding area of
the sensor to a strong impact. If sub-
jected to an impact, have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer. If the front or
rear bumper needs to be
removed/installed or replaced, con-
tact any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer.
● Do not modify, disassemble or paint
the sensors.
● Do not attach a license plate cover.
● Keep your tires properly inflated.
● Do not install a suspension other than
a genuine suspension.
■ Notes when washing the vehicle
● When using a high pressure washer to
wash the vehicle, do not spray the sen-
sors directly, as doing so may cause a
sensor to malfunction.
● When using steam to clean the vehi-
cle, do not direct steam too close to
the sensors, as doing so may cause a
sensor to malfunction.
322
4-5. Using the driving support systems
● If the meter malfunctions, the buzzer may
not sound.
■ Objects which the system may not be
properly detected
The shape of the object may prevent the
sensor from detecting it. Pay particular
attention to the following objects:
● Wires, fences, ropes, etc.
● Cotton, snow and other materials that
absorb sound waves
● Sharply-angled objects
● Low objects
● Tall objects with upper sections project-
ing outwards in the direction of your vehi-
cle
People may not be detected if they are
wearing certain types of clothing.
■ Situations in which the system may not
operate properly
Certain vehicle conditions and the sur-
rounding environment may affect the ability
of a sensor to correctly detect objects. Par-
ticular instances where this may occur are
listed below.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is frozen. (Thawing the area will
resolve this problem.) In especially cold
weather, if a sensor is frozen the sensor
display may be displayed abnormally, or
objects, such as a wall, may not be
detected.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● A sensor is coated with a sheet of spray
or heavy rain.
● If objects draw too close to the sensor.
● When a pedestrian is wearing clothing
that does not reflect ultrasonic waves (ex.
skirts with gathers or frills).
● When objects that are not perpendicular
to the ground, not perpendicular to the
vehicle traveling direction, uneven, or
waving are in the detection range.
● When strong winds are blowing.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When an object that cannot be detected
is between the vehicle and a detected
object.
● If an object such as a vehicle, motorcycle,
bicycle or pedestrian cuts in front of the
vehicle or runs out from the side of the
vehicle.
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● When equipment such as a towing eye-
let, transport hook, bumper protector,
bumper trim, bicycle carrier or snow-
removal device (snow plow) is installed
near the sensor.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle.
■ Situations in which the system may
operate even if there is no possibility of a
collision
In some situations, such as the following, the
323
4
4-5. Using the driving support systems
Driving
system may operate even though there is
no possibility of a collision.
● When driving on a narrow road.
● When driving toward a banner, flag, low-
hanging branch or boom barrier (such as
those used at railroad crossings, toll
gates and parking lots).
● When there is a rut or hole in the surface
of the road.
● When driving on a metal cover (grating),
such as those used for drainage ditches.
● When driving up or down a steep slope.
● If a sensor is hit by a large amount of
water, such as when driving on a flooded
road.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is coated with a sheet of spray
or heavy rain.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When strong winds are blowing.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● The vehicle is approaching a tall or
curved curb.
● Driving close to columns (H-shaped steel
beams, etc.) in multi-story parking
garages, construction sites, etc.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle.
324
4-5. Using the driving support systems
■ Detection range of the sensors
Vehicles without Advanced Park
Approximately 100 cm (3.3 ft.)
Approximately 150 cm (4.9 ft.)
Approximately 60 cm (2.0 ft.)
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
Vehicles with Advanced Park
Approximately 200 cm (6.6 ft.)
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
■ The distance and buzzer
Vehicles without Advanced Park
Sensor detection display, object
distance
A
B
C
A
Approximate distance to object Buzzer
Front center sensor:
Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.)
*
Rear center sensor:
Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.)
*
Slow
Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.)
*
Medium
Approximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.)
*
Fast
Approximately less than 30 cm (1.0 ft.) Continuous
325
4
4-5. Using the driving support systems
Driving
*
: Automatic buzzer mute function is enabled. (P.326)
Vehicles with Advanced Park
*
: Automatic buzzer mute function is enabled. (P.326)
A buzzer sounds when the sensors are
operating.
The buzzer beeps faster as the vehi-
cle approaches a static object.
When the vehicle comes within the
approximately 30 cm (1.0 ft.) of the
object, the buzzer will sound contin-
uously.
When 2 or more sensors simultane-
ously detect a static object, the
buzzer sounds for the nearest
object.
After an intermittent buzzer begins
sounding, if the distance between
the vehicle and the detected static
object does not become shorter, the
buzzer will be muted automatically.
(automatic buzzer mute function)
■ Adjusting the buzzer volume
The buzzer volume of the Lexus parking
assist-sensor, RCTA (if equipped) and
RCD (if equipped) can all be changed at
once from the customize settings.
Approximate distance to object Buzzer
Front center sensor:
Approximately 200 cm (6.6 ft.) to 100 cm (3.3 ft.)
Rear center sensor:
Approximately 200 cm (6.6 ft.) to 150 cm (4.9 ft.)
Corner sensor:
Approximately 200 cm (6.6 ft.) to 60 cm (2.0 ft.)
Does not sound (Display only)
Front center sensor:
Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.)
*
Rear center sensor:
Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.)
*
Slow
Front/Rear center sensor and Corner sensor:
Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.)
*
Medium
Front/Rear center sensor and Corner sensor:
Approximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.)
*
Fast
Approximately less than 30 cm (1.0 ft.) Continuous
Lexus parking assist-sensor
buzzer
326
4-5. Using the driving support systems
(P.556)
■ Muting a buzzer
When the temporary mute switch is dis-
played on the Center Display, this switch
can be pressed to temporarily mute the
buzzer.
Select the switch to mute a buzzer of the
Lexus parking assist-sensor, RCTA (if
equipped) and RCD (if equipped) all
together.
● Mute will be automatically canceled in
the following situations:
• When the shift position is changed.
• When the vehicle speed exceeds a cer-
tain speed.
• When there is a malfunction in a sensor
or the system is temporarily unavailable.
• When the operating function is disabled
manually.
• When the power switch is turned off.
The object warning function informs
the driver of the existence of objects
along the side of the vehicle, using a
display and buzzer, if the objects are
within the estimated path of the vehi-
cle.
Object
Calculated vehicle route
When the vehicle is moving, the side sensors or side cameras can detect objects.
While the vehicle is moving, if a detected object can no longer be detected by the
side sensors or side cameras, the location of the object relative to the vehicle is
estimated. If the object is determined to be in the estimated path of the vehicle, the
object warning function will operate.
Object detected by side sensors or side cameras
1 The vehicle is stopped and objects along the sides of the vehicle are not
detected.
Lexus parking assist-sensor
object warning function (vehi-
cles with Advanced Park)
A
B
A
327
4
4-5. Using the driving support systems
Driving
2 Objects are detected as the vehicle is moving.
3 Even though the objects are outside of the detection area of the side sensors or
side cameras, a warning is displayed and a buzzer sounds.
■ Object warning function operating con-
ditions
● The vehicle moves about 7 m (23.0 ft.)
after the hybrid system is started.
● After the D shift position has been
selected, the vehicle has moved 7 m
(23.0 ft.) or less.
● The R shift position is selected.
● switch has been pressed and the
Center Display is displayed.
● The front or rear sensor detects a station-
ary object.
■ Detection of objects along the sides of
the vehicle
● Objects along the sides of the vehicle are
not instantaneously detected. The loca-
tion of objects in relation to the vehicle is
estimated after they are first detected by
the front or rear side sensors, or side
cameras. Therefore, after the power
switch is changed to ON, even if an
object is along the side of the vehicle, it
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
● If a vehicle, person, animal, etc., is
detected by a side sensors or side cam-
eras, but then leaves the detection area
of the side sensors or side cameras, the
system will assume the object has not
moved.
WARNING
■ Side sensors and side cameras
In situations such as the following, the
function may not operate correctly, pos-
sibly leading to an accident. Proceed
carefully.
● When starting off shortly after the
power switch is turned to ON and a
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off,
the vehicle on the left will not be
detected and the object warning func-
tion will not operate.
● When an object or person is in a posi-
tion which cannot be detected by the
side sensors or side cameras.
● When a vehicle, person, or other
object approaches the side of the vehi-
cle after the side sensors have com-
pleted scanning the areas along the
sides of the vehicle.
● When the outside rear view mirror is
folded.
● If the 12-volt battery was discharged or
has been removed and installed, fold
and extend the outside rear view mir-
rors.
328
4-5. Using the driving support systems
*
: If equipped
Center Display
Turning the RCTA function on/off in Cen-
ter Display.
If a vehicle approaching from the right or
left at the rear of the vehicle is detected,
the RCTA icon (P.329) for the detected
side will be displayed on the Center Dis-
play. This illustration
*
shows an example of
a vehicle approaching from both sides of
the vehicle.
*
: Depending on the vehicle grade and
equipped options, the actual screen may
be different from this illustration.
Outside rear view mirror indicators
If a vehicle is detected as approaching
from the left or right behind the vehicle,
both outside rear view mirror indicators
(P.95) will blink and a buzzer will sound.
Driving assist information indicator
Illuminates when the RCTA is turned off.
At this time, a message will be displayed on
the multi-information display.
The RCTA can be enabled/disabled
through a customize setting.
RCTA (Rear Crossing Traffic
Alert) function
*
The RCTA function uses the BSM
rear side radar sensors installed
behind the rear bumper. This func-
tion is intended to assist the driver
in checking areas that are not easily
visible when backing up.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings.
The RCTA function is only a supplemen-
tary function which alerts the driver that a
vehicle is approaching from the right or
left at the rear of the vehicle.
As the RCTA function may not function
correctly under certain conditions, the
driver’s own visual confirmation of safety
is necessary.
Over reliance on this function may lead
to an accident resulting death or serious
injury.
■ To ensure the system can operate
properly
P.303
System components
Turning the RCTA function
on/off
A
B
C
329
4
4-5. Using the driving support systems
Driving
(P.556)
When the RCTA function is off, the
driving assist information indicator
(P.95) will illuminate and a message
will be displayed on the multi-informa-
tion display. Each time the power
switch is turned to ON, the RCTA
function is enabled.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear
over loud noises, such as if the audio system
volume is high.
■ Rear side radar sensors
P.303
■ Operation of the RCTA function
The RCTA function uses rear side
radar sensors to detect vehicles
approaching from the right or left at
the rear of the vehicle and alerts the
driver of the presence of such vehicles
by flashing the outside rear view mirror
indicators and sounding a buzzer.
Approaching vehicles
Detection areas of approaching
vehicles
■ RCTA icon display
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, the following will be dis-
played on the Center Display.
Example: Vehicles are approaching from
both sides of the vehicle
■ RCTA function detection areas
The areas that vehicles can be
detected in are outlined below.
The buzzer can alert the driver of
faster vehicles approaching from far-
ther away.
RCTA function
A
B
330
4-5. Using the driving support systems
Example:
■ The RCTA function is operational when
The RCTA function operates when all of the
following conditions are met:
● The power switch is in ON.
● The RCTA function is on.
● The shift position is in R.
● The vehicle speed is less than approxi-
mately 15 km/h (9 mph).
● The approaching vehicle speed is
between approximately 8 km/h (5 mph)
and 56 km/h (34 mph).
■ Setting the buzzer volume
The buzzer volume of the RCTA, Lexus
parking assist-sensor and RCD (if
equipped) can be adjusted all together
through a customize setting. (P.556)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the Center Dis-
play.
Select the switch to mute the buzzer of the
Lexus parking assist-sensor, RCTA and
RCD (if equipped) all together.
Mute will be canceled automatically in the
following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a cer-
tain speed.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When the operating function is disabled
manually.
● When the power switch is turned off.
■ Conditions under which the system will
not detect a vehicle
The RCTA function is not designed to
detect the following types of vehicles
and/or objects:
● Vehicles approaching from directly
behind
● Vehicles backing up in a parking space
next to your vehicle
● Vehicles that the sensors cannot detect
due to obstructions
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles moving away from your vehicle
● Vehicles approaching from the parking
spaces next to your vehicle
*
● The distance between the sensor and
approaching vehicle gets too close
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the system may not
operate properly
The RCTA function may not detect vehicles
correctly in the following situations:
● When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
● When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
● When driving on a wet road surface, such
as in a puddle, while in inclement
weather, such as heavy rain, snow, fog,
etc.
Approaching vehi-
cle speed
Approximate
alert distance
56 km/h (34 mph)
(fast)
30 m (98 ft.)
8 km/h (5 mph)
(slow)
4 m (13 ft.)
A
331
4
4-5. Using the driving support systems
Driving
● When multiple vehicles are approaching
with only a small gap between each vehi-
cle
● When a vehicle is approaching at high
speed
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow
● When backing up on a slope with a sharp
change in grade
● When backing out of a sharp angle park-
ing spot
● Immediately after the RCTA function is
turned on
● Immediately after the hybrid system is
started with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing with the vehicle
● When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
● When a sensor or the area around a sen-
sor is extremely hot or cold
● If the suspension has been modified or
tires of a size other than specified are
installed
● If the front of the vehicle is raised or low-
ered due to the carried load
● When turning while backing up
● When a vehicle turns into the detection
area
■ Situations in which the system may
operate even if there is no possibility of a
collision
Instances of the RCTA function unneces-
sarily detecting a vehicle and/or object may
increase in the following situations:
● When the parking space faces a street
and vehicles are being driven on the
street
● When the distance between your vehicle
and metal objects, such as a guardrail,
wall, sign, or parked vehicle, which may
332
4-5. Using the driving support systems
reflect electrical waves toward the rear of
the vehicle, is short
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow
● When a vehicle passes by the side of your
vehicle
● When a detected vehicle turns while
approaching the vehicle
● When there are spinning objects near
your vehicle such as the fan of an air con-
ditioning unit
● When water is splashed or sprayed
toward the rear bumper, such as from a
sprinkler
● Moving objects (flags, exhaust fumes,
large rain droplets or snowflakes, rain
water on the road surface, etc.)
● When the distance between your vehicle
and a guardrail, wall, etc., that enters the
detection area is short
● Gratings and gutters
● When a sensor or the area around a sen-
sor is extremely hot or cold
● If the suspension has been modified or
tires of a size other than specified are
installed
● If the front of the vehicle is raised or low-
ered due to the carried load
● When towing with the vehicle
333
4
4-5. Using the driving support systems
Driving
*
: If equipped
Location of the rear camera
RCD (Rear Camera Detec-
tion)
*
When the vehicle is backing up, the
rear camera detection function can
detect pedestrians in the detection
area behind the vehicle. If a pedes-
trian is detected, a buzzer will
sound and an icon will be displayed
on the Center Display to inform the
driver of the pedestrian.
WARNING
■ Cautions regarding the use of the
system
The recognition and control capabilities
for this system are limited.
The driver should always drive safely by
always being responsible without over
relying on the system and have an under-
standing of the surrounding situations.
■ To ensure the system can operate
properly
Observe the following, otherwise there is
the danger that could lead to an acci-
dent.
● Always clean the camera without
damaging it.
● Do not install market parts (such as
Illuminated license plate, fog lamps,
etc.) in the camera vicinity.
● Do not subject the camera vicinity to
strong impacts. If the vicinity is sub-
jected to a strong impact, have the
vehicle inspected by any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● Do not disassemble, remodel or paint
the camera.
● Do not attach accessories or stickers
to the camera.
● Do not install market protection parts
(bumper trim, etc.) to the rear bumper.
● Maintain suitable tire air pressure.
● Make sure the back door is completely
closed.
■ When to disable the RCD function
In the following situations, disable the
system. The RCD function may not oper-
ate properly, possibly leading to an acci-
dent.
● The contents mentioned above are not
observed.
● Suspensions other than the genuine
parts are installed.
System component
RCD display
334
4-5. Using the driving support systems
Pedestrian detection icon
Displayed automatically when a pedestrian
is detected behind the vehicle.
The RCD function can be enabled/dis-
abled through a customize setting.
(P.556)
When the RCD function is disabled, the
driving assist information indicator
(P.95) illuminates, and a message is dis-
played on the multi-information display.
Each time the power switch is turned off
then changed to ON, the RCD function
will be enabled automatically.
If a pedestrian is in the area behind the
vehicle or if the rear camera detected
that a pedestrian is approaching the
vehicle from behind, the system urges
caution from the driver by sounding
the buzzer and displaying the detec-
tion of a pedestrian on the Center Dis-
play as follows:
If a pedestrian is detected in area
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
If a pedestrian is detected in area
Buzzer (When the vehicle is sta-
tionary): Sounds 3 times
Buzzer (When the vehicle is back-
ing up, when a pedestrian
approaches the rear of the vehicle):
Sounds repeatedly
Pedestrian detection icon: Blinks
If the system determines that your
vehicle may collide with a pedes-
trian in area
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
■ The rear camera detection function is
operational when
● The power switch is in ON.
● RCD function is on.
● The shift position is in R.
● Advanced Park
*
is not operating.
*
: If equipped
■ Setting the buzzer volume
The buzzer volume of the Lexus parking
assist-sensor, RCTA, and RCD can all be
changed at once from the customize set-
tings. (P.556)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the Center Dis-
play.
Select the switch to mute a buzzer of the
Lexus parking assist-sensor, RCTA, and
RCD all together.
Turning the RCD function on/off
When a pedestrian is detected
A A
A
B
B
C
C
335
4
4-5. Using the driving support systems
Driving
Mute will be automatically canceled in the
following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a cer-
tain speed.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When the operating function is disabled
manually.
● When the power switch is turned off.
■ Situations in which the system may not
operate properly
● Some pedestrians, such as the following,
may not be detected by the rear camera
detection function, preventing the func-
tion from operating properly:
• Pedestrians who are bending forward or
squatting
• Pedestrians who are lying down
• Pedestrians who are running
• Pedestrians who suddenly appear from
the shadow of the vehicle or a building
• Pedestrians who are riding moving
objects such as a bicycle or skateboard
• Pedestrians wearing oversized clothing
such as a rain coat, long skirt, etc., making
their silhouette obscure
• Pedestrians whose body is partially hid-
den by an object, such as a cart or
umbrella
• Pedestrians which are obscured by dark-
ness, such as at night
● In some situations, such as the following,
pedestrians may not be detected by the
rear camera detection function, prevent-
ing the function from operating properly:
• When backing up in inclement weather
(rain, snow, fog, etc.)
• The lens is dirty (by dirt or snow-melting
agent, etc.) or scratched
• When a very bright light, such as the sun,
or the headlights of another vehicle,
shines directly into the rear camera
• When backing up in a place where the
surrounding brightness changes sud-
denly, such as at the entrance or exit of a
garage or underground parking lot
• When backing up in a dim environment
such as during dusk or in an underground
parking lot
• When the camera position and direction
are deviated
• When a towing hook is attached
• When water droplets are flowing on the
camera lens
• When the vehicle height is extremely
changed (nose up, nose down, etc.)
• When tire chains or an emergency tire
puncture repair kit are used
• When the suspension has been lowered
or tires that have a different size than the
genuine tires are installed
• When an aftermarket part (backlit
license plate, fog light, etc.) is installed
near the rear camera
• If a bumper protector, such as an addi-
tional trim strip, is installed to the rear
bumper
• When towing with the vehicle
■ Situations in which the system may
operate unexpectedly
● Even though there are no pedestrians in
the detection area, some objects, such as
the following, may be detected, possibly
causing the rear camera detection func-
tion to operate.
• Three dimensional objects, such as a
pole, traffic cone, fence, or parked vehi-
cle
• Moving objects, such as a car or motor-
cycle
• Objects moving toward your vehicle
when backing up, such as flags or pud-
dles (or airborne matter, such as smoke,
steam, rain, or snow)
• Cobblestone or gravel roads, tram rails,
road repairs, white lines, pedestrian
crossings or fallen leaves on the road
• Metal covers (gratings), such as those
used for drainage ditches
• Objects reflected in a puddle or on a wet
road surface
• Shadows on the road
● In some situations, such as the following,
the rear camera detection function may
operate even though there are no pedes-
trians in the detection area.
• When backing up toward the roadside or
a bump on the road
• When backing up toward an
336
4-5. Using the driving support systems
incline/decline
• When the vehicle height is extremely
changed (nose up, nose down, etc.)
• When an aftermarket part (backlit
license plate, fog light, etc.) is installed
near the rear camera
• If a bumper protector, such as an addi-
tional trim strip, is installed to the rear
bumper
• If the orientation of the rear camera has
been changed due to a collision or other
impact, or removal and installation
• If a towing eyelet is installed to the rear of
the vehicle
• When water is flowing over the rear cam-
era lens
• The lens is dirty (by dirt or snow-melting
agent, etc.)
• If there is a flashing light in the detection
area, such as the emergency flashers of
another vehicle
• When tire chains or an emergency tire
puncture repair kit are used
• When towing with the vehicle
● Situations in which the rear camera
detection function may be difficult to
notice
• The buzzer may be difficult to hear if the
surrounding area is noisy or the audio
system volume is high.
• If the temperature in the cabin is
extremely high or low, the Center Dis-
play may not operate correctly.
*
: If equipped
The system has detected the following
as operation targets. (The operation
targets vary depending on the func-
tion.)
Parking Support Brake function
(static objects front and rear of the
vehicle):P.340
Parking Support Brake function
(moving vehicles rear of the vehicle)
(if equipped):P.344
Parking Support Brake function
(pedestrians rear of the vehicle) (if
equipped):P.346
Parking Support Brake function
(static objects around the vehicle)
(vehicles with Advanced
Park):P.340
PKSB (Parking Support
Brake)
*
The PKSB (Parking Support Brake)
is a system that issues warnings and
automatically performs braking to
help reduce collision damage with
operation targets that were
detected when traveling at a low
speed such as when parking.
PKSB (Parking Support Brake)
system
337
4
4-5. Using the driving support systems
Driving
The Parking Support Brake function
can be enabled/disabled through a
customize setting. (P.556)
When the PKSB (Parking Support
WARNING
■ Cautions regarding the use of the
system
Do not overly rely on the system, as
doing so may lead to an accident.
Always drive while checking the safety of
the surroundings of the vehicle.
Depending on the vehicle and road con-
ditions, weather, etc., the system may not
operate.
The detection capabilities of sensors and
radars are limited. Always drive while
checking the safety of the surroundings
of the vehicle.
● The driver is solely responsible for safe
driving. Always drive carefully, taking
care to observe your surroundings.
The Parking Support Brake system is
designed to provide support to lessen
the severity of collisions. However, it
may not operate in some situations.
● The Parking Support Brake system is
not designed to stop the vehicle com-
pletely. Additionally, even if the system
has stopped the vehicle, it is necessary
to depress the brake pedal immedi-
ately as brake control will be canceled
after approximately 2 seconds.
● It is extremely dangerous to check the
system operations by intentionally
driving the vehicle into the direction of
a wall, etc. Never attempt such actions.
■ When to disable the Parking Support
Brake
In the following situations, disable the
Parking Support Brake as the system
may operate even though there is no
possibility of a collision.
● When inspecting the vehicle using a
chassis roller, chassis dynamo or free
roller
● When loading the vehicle onto a boat,
truck or other transport vessel
● If the suspension has been modified or
tires of a size other than specified are
installed
● If the front of the vehicle is raised or
lowered due to the carried load
● When equipment such as a towing
hook, transport hook, bumper protec-
tor, bumper trim, bicycle carrier or
snow-removal device (snow plow) is
installed near the sensor
● When using automatic car washing
devices
● If the vehicle cannot be driven in a sta-
ble manner, such as when the vehicle
has been in an accident or is malfunc-
tioning
● When the vehicle is driven in a sporty
manner or off-road
● When the tires are not properly
inflated
● When the tires are very worn
● When tire chains, a compact spare tire
or an emergency tire puncture repair
kit are used
● When towing with the vehicle
■ Precautions for the suspension
Do not modify the suspension of the
vehicle. If the height or tilt of the vehicle is
changed, the sensors may not be able to
detect detectable objects and the system
may not operate correctly, possibly lead-
ing to an accident.
Enabling/Disabling the Parking
Support Brake
338
4-5. Using the driving support systems
Brake) is disabled, the driving assist
information indicator (P.95) illumi-
nates, and a message is displayed on
the multi-information display.
If the PKSB (Parking Support Brake) is
switched to OFF (disabled), the system
will not be re-enabled until ON
(enabled) is selected again from the
customize setting (P.556).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
If the hybrid system output restriction con-
trol or brake control operates, a buzzer
will sound and a message that indicates
limited acceleration or prompts the driver
to brake will be displayed on the Center
Display and multi-information display, to
alert the driver.
Depending on the situation, output restric-
tion control operates to either limit accel-
eration or restrict output as much as
possible.
Hybrid system output restriction
control is operating (acceleration
restriction)
Acceleration greater than a certain
amount is restricted by the system.
Center Display: No warning displayed
Message example on the multi-informa-
tion display: “Object Detected Accelera-
tion Reduced”
Driving assist information indicator: Not
illuminated
Buzzer: Does not sound
Hybrid system output restriction
control is operating (output
restricted as much as possible)
The system has determined that stronger-
than-normal brake operation is necessary.
Message example on the Center Display
(vehicles with a panoramic view monitor or
parking assist monitor with RCD [Rear
Camera Detection]): “BRAKE!”
Message example on the multi-informa-
tion display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Brake control is operating
The system determined that emergency
braking is necessary.
Message example on the Center Display
(vehicles with a panoramic view monitor or
parking assist monitor with RCD [Rear
Camera Detection]): “BRAKE!”
Message example on the multi-informa-
tion display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Vehicle stopped by system opera-
tion
The vehicle has been stopped by brake
control operation.
Message example on the Center Display
(vehicles with a panoramic view monitor or
parking assist monitor with RCD [Rear
Camera Detection]): “Switch to Brake”
Message example on the multi-informa-
tion display: “Accelerator Pedal is Pressed
Press Brake Pedal”, “Press Brake Pedal”
Display and buzzer for hybrid
system output restriction control
and brake control
339
4
4-5. Using the driving support systems
Driving
Driving assist information indicator: Illumi-
nated
Buzzer: Sounds repeatedly
If the Parking Support Brake deter-
mines that a collision with a detected
object or pedestrian is possible, the
hybrid system output will be restricted
to restrain any increase in the vehicle
speed. (Hybrid system output restric-
tion control: See figure 2 below.)
Additionally, if the accelerator pedal
continues to be depressed, the brakes
will be applied automatically to reduce
the vehicle speed. (Brake control: See
figure 3.)
Figure 1: When the PKSB (Parking
Support Brake) is not operating
Hybrid system output
Braking force
Time
Figure 2: When hybrid system out-
put restriction control operates
Hybrid system output
Braking force
Time
Hybrid system output restriction
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
Figure 3: When hybrid system out-
put restriction control and brake
control operates
Hybrid system output
Braking force
Time
Hybrid system output restriction
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
Brake control begins operating
System overview
A
B
C
A
B
C
D
A
B
C
D
E
340
4-5. Using the driving support systems
(System determines that possibility
of collision with detected object is
extremely high)
■ If the Parking Support Brake has oper-
ated
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
Support Brake will be disabled and the driv-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
(Parking Support Brake) operates, the
brake control is canceled after approxi-
mately 2 seconds to start off. Furthermore,
the brake control also can be canceled by
depressing the brake pedal. Depressing the
accelerator pedal again after that allows the
vehicle to start off.
■ Re-enabling the Parking Support Brake
To re-enable the Parking Support Brake
when it is disabled due to operation of the
PKSB (Parking Support Brake), either
enable the system again, or turn the power
switch off and then back to ON.
Additionally, if any of the following condi-
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.95):
● The P shift position is selected
● Drive with no operation targets in the
traveling direction of the vehicle
● Change the traveling direction of the
vehicle
■ Buzzer
Regardless of whether the Lexus parking
assist sensor is enabled or not (P.320), if
the PKSB (Parking Support Brake) system
is enabled (P.337), the buzzer will sound
to notify the driver of the approximate dis-
tance to the object when the brake control
and the hybrid system output restriction
control are operated.
*
: If equipped
This function will operate in situations
such as the following if an object is
detected in the traveling direction of
the vehicle.
Parking Support Brake
function (static objects front
and rear of the vehicle/static
objects around the vehicle)
*
If the sensors detect a static object,
such as a wall, in the traveling direc-
tion of the vehicle and the system
determines that a collision may
occur due to the vehicle suddenly
moving forward due to an acciden-
tal accelerator pedal operation, the
vehicle moving the unintended
direction due to the wrong shift
position being selected, or while
parking or traveling at low speeds,
the system will operate to lessen
the impact with the detected static
object and reduce the resulting
damage.
Examples of function operation
(static objects front and rear of
the vehicle)
341
4
4-5. Using the driving support systems
Driving
■ When traveling at a low speed and
the brake pedal is not depressed,
or is depressed late
■ When the accelerator pedal is
depressed excessively
■ When the vehicle moves forward
due to the incorrect shift position
being selected
The system will operate in the following
situations when a stationary object is
detected in the surrounding area.
Examples of function operation
(static objects around the vehi-
cle) (vehicles with Advanced
Park)
342
4-5. Using the driving support systems
■ When moving forward and a colli-
sion with a stationary object on the
inner side of a turn is likely
■ When reversing and a collision
with a stationary object on the
outer side of a turn is likely
P.319
Types of sensors
WARNING
■ To ensure the system can operate
properly
P.320
■ If the Parking Support Brake function
operates unnecessarily, such as at a
railroad crossing
P.340
■ Notes when washing the vehicle
P.321
■ Side sensors and side cameras (vehi-
cles with Advanced Park)
In situations such as the following, Park-
ing Support Brake function (static
objects around the vehicle) may not
operate correctly, possibly leading to an
accident. Proceed carefully.
● When starting off shortly after the
power switch is turned to ON and a
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off,
the vehicle on the left will not be
detected and the object warning function
will not operate.
● When an object or person is in a posi-
tion which cannot be detected by the
side sensors or side cameras.
343
4
4-5. Using the driving support systems
Driving
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.92) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• There is a static object in the traveling
direction of the vehicle and approxi-
mately 2 to 4 m (6 to 13 ft.) away.
• The Parking Support Brake determines
that a stronger-than-normal brake oper-
ation is necessary to avoid a collision.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an immediate brake operation is
necessary to avoid a collision.
■ The Parking Support Brake function
(static objects around the vehicle) will
operate when (vehicles with Advanced
Park)
This function is operable when any of the
following conditions is met in addition to the
operating conditions for static objects in
front and rear of the vehicle.
● After the hybrid system has been started,
the vehicle has moved approximately 7 m
(23.0 ft.) or less
● The R shift position is selected
● After the shift position has been changed
from R to D, the vehicle has moved
approximately 7 m (23.0 ft.) or less
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle/static objects around the vehicle
*
)
will stop operating when
*
: Vehicles with Advanced Park
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The system determines that the collision
has become avoidable with normal brake
operation.
• The static object is no longer approxi-
mately 2 to 4 m (6 to 13 ft.) away from the
vehicle or in the traveling direction of the
vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
• The static object is no longer approxi-
mately 2 to 4 m (6 to 13 ft.) away from the
vehicle or in the traveling direction of the
vehicle.
■ Detection range of the Parking Support
Brake function (static objects front and
rear of the vehicle/static objects around
the vehicle
*
)
*
: Vehicles with Advanced Park
The detection range of the Parking Support
Brake function (static objects front and rear
of the vehicle/static objects around the
vehicle) differs from the detection range of
the Lexus parking assist-sensor (P.324).
Therefore, even if the Lexus parking assist-
sensor detects an object and provides a
warning, the Parking Support Brake func-
tion (static objects front and rear of the
vehicle/static objects around the vehicle)
WARNING
● When a vehicle, person, or other
object approaches the side of the vehi-
cle after the side sensors have com-
pleted scanning the areas along the
sides of the vehicle.
● When the outside rear view mirror is
folded.
● If the 12-volt battery was discharged or
has been removed and installed, fold
and extend the outside rear view mir-
rors.
344
4-5. Using the driving support systems
may not start operating.
■ Situations in which the system may not
operate properly
P.322
■ Situations in which the system may
operate even if there is no possibility of a
collision
P.322
■ Situations in which the system may
operate even though there is no possi-
bility of a collision (static objects around
the vehicle) (vehicles with Advanced
Park)
In addition to the situations in which static
objects in front and rear of the vehicle
(P.343) may not be detected, objects
may not be detected by the sensors in the
following situations:
● When moving sideways, such as when
parallel parking (P.363)
■ Detection of objects along the sides of
the vehicle (static objects around the
vehicle) (vehicles with Advanced Park)
● Objects along the sides of the vehicle are
not instantaneously detected. The loca-
tion of objects in relation to the vehicle is
estimated after they are first detected by
the front or rear side sensors, or side
cameras. Therefore, after the power
switch is changed to ON, even if an
object is along the side of the vehicle, it
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
● If a vehicle, person, animal, etc., is
detected by a side sensors or side cam-
eras, but then leaves the detection area
of the side sensors or side cameras, the
system will assume the object has not
moved.
*
: If equipped
This function will operate in situations
such as the following if a vehicle is
detected in the traveling direction of
the vehicle.
■ When reversing, a vehicle is
approaching and the brake pedal is
not depressed, or is depressed late
P.303
Parking Support Brake
function (moving vehicles
rear of the vehicle)
*
If a rear radar sensor detects a
vehicle approaching from the right
or left at the rear of the vehicle and
the system determines that the pos-
sibility of a collision is high, this
function will perform brake control
to reduce the likelihood of an
impact with the approaching vehi-
cle.
Examples of the function opera-
tion
Types of sensors
345
4
4-5. Using the driving support systems
Driving
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.92) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 15
km/h (9 mph) or less.
• Vehicles are approaching from the right
or left at the rear of the vehicle at a travel-
ing speed of approximately 8 km/h (5
mph) or more.
• The shift position is in R.
• The Parking Support Brake determines
that a stronger than normal brake opera-
tion is necessary to avoid a collision with
an approaching vehicle.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determined
that an emergency brake operation was
necessary to avoid a collision with a vehi-
cle approaching from the rear.
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The collision becomes avoidable with
normal brake operation.
• A vehicle is no longer approaching from
the right or left at the rear of the vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
■ Situations in which the system may not
operate properly
P.330
■ Situations in which the system may
operate even if there is no possibility of a
collision
P.331
WARNING
■ To ensure the system can operate
properly
P.303
346
4-5. Using the driving support systems
*
: If equipped
The system operates when an
approaching pedestrian is detected
behind the vehicle while backing up,
and when the brake pedal is not
depressed or is depressed late.
Displays a message to prompt the
driver to brake when a pedestrian is
detected in the detection area behind
the vehicle.
Pedestrian detection icon
Example: “BRAKE!”
■ The Parking Support Brake function
(pedestrians rear of the vehicle) will
operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.92) and all of the following con-
ditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is 15 km/h (9 mph) or
less.
• The shift position is in R.
• When a pedestrian is to the rear of the
vehicle
Parking Support Brake
function (pedestrians rear of
the vehicle)
*
If the rear camera sensor detects a
pedestrian behind the vehicle while
backing up and the system deter-
mines that the possibility of collid-
ing with the detected pedestrian is
high, a buzzer will sound. If the sys-
tem determines that the possibility
of colliding with the detected
pedestrian is extremely high, the
brakes will be applied automati-
cally to help reduce the impact of
the collision.
Examples of system operation
Screen display of pedestrians
rear of the vehicle
WARNING
■ If the Parking Support Brake function
(pedestrians rear of the vehicle)
operates unnecessarily
Depress the brake pedal immediately
after the Parking Support Brake function
(pedestrians rear of the vehicle) oper-
ates. (Operation of the function is can-
celed by depressing the brake pedal.)
■ Correct use of the Parking Support
Brake function (pedestrians rear of
the vehicle)
P.333
A
B
347
4
4-5. Using the driving support systems
Driving
• The PKSB (Parking Support Brake)
determines that a stronger-than-normal-
brake operation is necessary to avoid a
collision.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an emergency brake operation is
necessary to avoid a collision with a
pedestrian.
■ The Parking Support Brake function
(pedestrians rear of the vehicle) will
stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The collision becomes avoidable with
normal brake operation.
• The pedestrian is no longer detected
behind your vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
■ Re-enabling the Parking Support Brake
function (pedestrians rear of the vehi-
cle)
P.340
■ Detection area of the Parking Support
Brake function (pedestrians rear of the
vehicle)
The detection area of the Parking Support
Brake function (pedestrians rear of the
vehicle) differs from the detection area of
the RCD function (P.334). Therefore,
even if the RCD function detects a pedes-
trian and provides an alert, the Parking Sup-
port Brake function (pedestrians rear of the
vehicle) may not start operating.
■ Situations in which the system may not
operate properly
P.335
■ Situations in which the system may
operate unexpectedly
P.335
348
4-5. Using the driving support systems
*
: If equipped
The Advanced Park is a system which
assists in a safe and smooth parking or
exiting from a parking space by dis-
playing the blind spots around the vehi-
cle and the target parking spot through
a bird’s eye view, delivering operation
guidance through displays and buzzer
operation, and changing the shift posi-
tion, operating the steering wheel,
accelerator pedal, and brake pedal.
Additionally, the panoramic view mon-
itor
*
can display the area in front,
behind, and from above the vehicle,
helping confirm the condition of the
area around the vehicle.
The turn signal lights will blink automat-
ically when the parking assistance
starts until the vehicle reaches the tar-
get parking spot, to notify people
around the vehicle that parking is
being performed.
Depending on the condition of the
road surface or the vehicle, the dis-
tance between the vehicle and a park-
ing space, etc., it may not be possible to
assist in parking in the target space.
Only use Advanced Park in accor-
dance with all local road traffic laws
and regulations.
*
: For details on the panoramic view moni-
tor refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ Remote control function (if
equipped)
Remote control function is a system
which assists in parking or exiting from
a parking space selected on the Cen-
ter Display by allowing changing the
shift position, operating the steering
wheel, accelerator pedal, and brake
pedal from outside of the vehicle via a
smartphone.
The turn signal lights will blink automat-
ically when the parking assistance,
except that for moving the vehicle for-
ward and backward, starts until the
vehicle reaches the target parking
spot, to notify people around the vehi-
cle that parking is being performed.
Preparation before using: P.376
■ Perpendicular parking (for-
ward/reverse) function
Assistance is provided from the posi-
tion the vehicle is stopped near the tar-
get parking space until the vehicle is in
the parking space. (P.359)
■ Perpendicular exiting (for-
ward/reverse) function
Assistance is provided from the parked
position until the vehicle is in a position
where you can easily exit from the
parking space. (P.362)
■ Parallel parking function
Assistance is provided from the posi-
Lexus Teammate Advanced
Park
*
Function description
Functions
349
4
4-5. Using the driving support systems
Driving
tion the vehicle is stopped near the tar-
get parking space until the vehicle is in
the parking space. (P.363)
■ Parallel exiting function
Assistance is provided from the parked
position until the vehicle is in a position
where you can easily exit from the
parking space. (P.366)
■ Memory function
Assistance is provided until the vehicle
is guided into a previously registered
parking space. (P.368)
■ Remote control function (if
equipped)
By operating a smartphone, assistance
in parking or exiting from a nearby tar-
get parking space, confirmed on the
screen of the smartphone, is provided
from outside of the vehicle. (P.373)
■ Trademarks
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Toyota Motor Corporation is under license.
Other trademarks and trade names are
those of their respective owners.
WARNING
■ Cautions regarding the use of
Advanced Park, including Remote
control function (if equipped)
The recognition and control capabilities
for this system are limited. The driver
should always drive safely by always
being responsible without over relying
on the system and have an understand-
ing of the surrounding situations.
● As with a normal vehicle, take care to
observe your surroundings while the
vehicle is moving.
● Always pay attention to the vehicle’s
surroundings while the system is oper-
ating and depress the brake pedal as
necessary to slow or stop the vehicle.
If Remote control function is in opera-
tion, stop operating the dedicated
smartphone app for Remote control
function (hereafter, dedicated app)
and stop the vehicle.
● When parking, make sure that the
vehicle can be parked in the target
parking space before beginning oper-
ation.
● Depending on the condition of the
road surface or the vehicle, the dis-
tance between the vehicle and a park-
ing space, etc., it may not be possible
to detect a parking space or the sys-
tem may not be able to provide assis-
tance to the point the vehicle is fully
parked.
● This system will guide the vehicle to
appropriate positions for changing the
direction of travel, however, if you feel
that the vehicle is approaching too
close to an adjacent parked vehicle at
any time, depress the brake pedal and
change the shift position. However, if
this is performed, the number of times
the vehicle changes direction may
increase, and the vehicle may be
parked at an angle.
● As certain objects or materials, such as
the following, may not be detected,
make sure to check the safety of the
area around your vehicle and depress
the brake pedal to stop the vehicle if it
may collide with an object.
If Remote control function is in opera-
tion, stop operating the dedicated app
and stop the vehicle.
350
4-5. Using the driving support systems
WARNING
• Thin objects (wires, fences, ropes,
poles, etc.) or objects that appear like
thin from a certain angle of approach
(signs, bicycles, etc.)
• Materials that absorb sound waves
(cotton, snow, etc.)
• Sharp-edged objects (block walls/col-
umns, wall corners, etc.)
• Objects in lower places (curb
stones/blocks, stairs, parking blocks,
etc.)
• Tall objects with upper sections that
protrude outward (beams, etc.)
• Objects which are not perpendicular
to the ground
• Objects to which the vehicle is
approaching diagonally
● Even if there is an object in the target
parking space, it may not be detected
and assistance may be performed.
● If it is likely that your vehicle will collide
with a nearby vehicle, object, or per-
son, or go over the top of a parking
block, depress the brake pedal to stop
the vehicle and press the Advanced
Park main switch to disable the system.
If Remote control function is in opera-
tion, stop operating the dedicated app
and stop the vehicle.
● Never use only the Center Display to
view the area behind the vehicle. The
image displayed may differ than the
actual situation. Using only the screen
when backing up may lead to an acci-
dent, such as a collision with another
vehicle. When backing up, make sure
to look directly or use the mirrors to
check the safety of the area around
your vehicle, especially behind the
vehicle.
● When the ambient temperature is
extremely low, the screen may appear
dark or the displayed image may
become unclear. Also, as moving
objects may appear distorted or may
not be able to be seen on the screen,
make sure to directly check the safety
of the area around your vehicle.
● In the following situations, while the
vehicle is stopped and held by
Advanced Park, it may be canceled
and the vehicle may start moving.
Immediately depress the brake pedal.
Failure to do so may lead to an acci-
dent.
If Remote control function is in opera-
tion, stop operating the dedicated app
and stop the vehicle.
• When the driver’s door is opened
• When operations instructed by the
system are not performed within a cer-
tain amount of time
• When the brake pedal is depressed
and the vehicle is stopped for a certain
amount of time
• When the system malfunctions
● As the steering wheel will turn while
this system is operating, pay attention
to the following.
• Be careful so that a necktie, scarf, or
arm does not get caught. Keep your
upper body away from the steering
wheel. Also, keep children away from
the steering wheel.
• Long fingernails may be caught and
when the steering wheel is rotating,
leading to injury.
• In an emergency, depress the brake
pedal to stop the vehicle, and then
press the Advanced Park main switch
to disable the system.
If Remote control function is in opera-
tion, stop operating the dedicated app
and stop the vehicle.
351
4
4-5. Using the driving support systems
Driving
WARNING
● Do not allow anyone to put their hands
outside of a window while this system
is operating.
■ To ensure correct operation of the
Advanced Park
Observe the following precautions. Fail-
ing to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
● Do not use this system in situations
such as the following:
• When in areas other than common
parking spaces
• When the surface of the parking space
is sand or gravel and is not clearly
defined with parking space lines
• When the parking space is not level,
such as on a slope, or having differ-
ences in height, holes, or gutters
• Mechanical parking system
• Parking lot with a device which raises
to contact the bottom of the vehicle
• When the road surface is frozen, slick,
or covered with snow
• When it is extremely hot and the
asphalt is melting
• When there are objects around the
vehicle
• When there is an object between your
vehicle and the target parking spot or
within the target parking spot (within
the displayed blue box)
• When in high pedestrian or vehicle
traffic areas
• When the parking space is in a loca-
tion that is difficult to park in (too nar-
row for your vehicle, etc.)
• When images are unclear due to dirt
or snow attached to the camera lens,
light being shined into the camera or
shadows
• When tire chains or a compact spare
tire is installed to the vehicle
• When the doors or back door are not
completely closed
• When an arm is held outside of a win-
dow
• In inclement weather such as heavy
rain or snow
● Make sure to use only standard sized
tires, such as those that were installed
to the vehicle when it was shipped
from the factory. Otherwise,
Advanced Park may not operate
properly. Also, when the tires have
been replaced, the displayed position
of the lines or box displayed on the
screen may become incorrect. When
replacing the tires, contact any autho-
rized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
● In situations such as the following, it
may not be possible for the system to
provide assistance to a registered
parking spot or to operate correctly:
• When the tires are extremely worn or
the tire inflation pressure is low
• When carrying a heavy load
• When the vehicle is tilted due to the
carried load
• When a heater is installed in the sur-
face of the parking space (road sur-
face freeze prevention heater)
• When the wheels are misaligned, such
after a wheel has been subjected to a
strong impact
• When a pedestrian or passing vehicle
is detected during assistance
352
4-5. Using the driving support systems
WARNING
• When a device, such as a towing hook,
bumper protector, bumper trim, bicy-
cle carrier, snow plow, etc., is installed
• When something is incorrectly
detected as a parking line (light, reflec-
tions from a building, difference in
height on the parking surface, a gutter,
painted road lines, redrawn lines, etc.)
If the vehicle deviates greatly from the
set parking space in any situation other
than the above, have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
■ When using Remote control function
(if equipped)
● Remote control function is a function
of the Advanced Park system. When
using Remote control function on pub-
lic roads, be sure to follow all local
road traffic laws and regulations.
● Remote control function can only be
used after agreeing to the disclaimer
of the dedicated app.
● Remote control function can only per-
form some driving operations. It
should only be operated by a driver
with a valid driving license. While using
the dedicated app, carry electronic
key. While operating, do not stare at
the dedicated app screen, and pay
attention to the vehicle’s surroundings.
In an emergency, cancel the Remote
control function operation and stop
the vehicle.
● As with a normal vehicle, take care to
observe the area around the vehicle
while the vehicle is moving.
● Always pay attention to the vehicle’s
surroundings while the system is oper-
ating.
● Make sure that the hood is closed
before operating the system.
● Remote control function is a system
which assists in remote parking or exit-
ing operations using a smartphone.
When using Remote control function,
the driver must carry the electronic
key and smartphone and confirm the
safety of the area around the vehicle.
● While using Remote control function,
the vehicle can be stopped by stop
operating the smartphone. The vehicle
can also be stopped by executing the
stop operation of the dedicated app,
unlocking the doors using the elec-
tronic key, or opening a door.
● If it seems like your vehicle may con-
tact an obstruction, etc., stop operat-
ing the smartphone and cancel
Remote control function if necessary.
● Regardless of the manner of smart-
phone operation, system operation will
only be performed at a fixed speed.
● Never drive the vehicle while staring
at the smartphone screen.
● When driving, make sure to directly
check the safety of the area around
your vehicle.
● Do not use Remote control function
when passengers or pets are in the
vehicle.
● In an emergency, the system can be
canceled by operating a switch on the
electronic key or by opening a door.
● To use Remote control function, it is
necessary to have a smartphone and
the most up-to-date dedicated app.
Download the dedicated app from the
app store.
● When registering the vehicle to the
dedicated app, disconnect any other
apps which are connected to the vehi-
cle.
353
4
4-5. Using the driving support systems
Driving
WARNING
● To enable Remote control function,
make sure to disable the Apple
CarPlay /Android Auto™ connection.
Apple CarPlay is a trademark of Apple
Inc., registered in the U.S. and other
countries.
Android Auto™ is a trademark of
Google LLC.
● When parking, make sure that the
vehicle can be parked in the target
parking space before beginning oper-
ation.
● Only use Remote control function on
level road surfaces which are not slick.
Do not use Remote control function
for parking spaces on a downward or
upward slope.
● While Remote control function is
operating, if a malfunction or system
limitation is detected, the following will
occur automatically:
• Remote control function will be can-
celed
• The vehicle will stop
• The shift position will change to P and
the parking brake will be engaged
• The power switch will turn off (for
some malfunctions, the power switch
will not turn off or cannot be turned off.
Enter the vehicle and take corrective
action according to the message dis-
played on the smartphone.)
• The doors will remain locked
● When starting Remote control func-
tion, unlock the doors with wireless
remote control by electronic key.
● When Remote control function is
operating, the driver should remain
within approximately 3 m (9.8 ft.) of
the vehicle. If the driver becomes
more than approximately 3 m (9.8 ft.)
away, Remote control function will be
suspended and a message will be dis-
played on the smartphone. Remote
control function operation can be
resumed by approaching the vehicle.
● The headlights will be turned on if the
surrounding area is dark.
● If system operation is canceled due to
a malfunction, the emergency flashers
will flash.
The emergency flashers will turn off if
any of the following conditions are
met:
• A door is opened
• 3 minutes have elapsed since the
emergency flashers began flashing
● Remote control function can only be
started when the following conditions
are met:
• When the hybrid system is starting,
after assist mode is selected
• When the power switch is off
NOTICE
■ Precautions for use Advanced Park
If the 12-volt battery was discharged or
has been removed and installed, fold and
extend the outside rear view mirrors.
354
4-5. Using the driving support systems
NOTICE
■ When using Remote control function
(if equipped)
● Check the battery charge level of the
smartphone before using Remote
control function. If the battery of the
smartphone dies while operating
Remote control function, assist will be
suspended. Also, if the battery charge
level of the smartphone is 20% or less
when attempting to start Remote con-
trol function, Remote control function
will not be started.
● Enable Bluetooth
®
of the smartphone
before using Remote control function.
Remote control function cannot be
used when Bluetooth
®
connection is
disabled.
● Do not disable the Bluetooth
®
of the
smartphone or disconnect from the
multimedia system while using Remote
control function. If the vehicle cannot
be connected to via Bluetooth
®
,
Remote control function cannot be
used.
● While using Remote control function,
if a call is received, etc., and another
app is opened, Remote control func-
tion will be suspended. Assist can be
resumed if the dedicated app is
reopened within 3 minutes. If 3 min-
utes or more elapse, assist will be can-
celed.
● While using Remote control function,
if the home button or power button of
the smartphone is pressed and the
screen is locked, Remote control func-
tion will be suspended. Assist can be
resumed if the dedicated app is
reopened within 3 minutes. If 3 min-
utes or more elapse, assist will be can-
celed.
● Do not force close the dedicated app
while Remote control function is being
used. If the app is force closed, assist
will be canceled.
● When the ambient temperature is low,
it may take time for the system to start,
due to 12-volt battery charging.
● If the 12-volt battery voltage drops,
assistance will be canceled.
● When using Remote control function
on a slope, the vehicle speed will be
slower and the distance that the vehi-
cle will approach objects will become
longer than when on a level road sur-
face.
● If a system temporary failure occurs,
after the vehicle is stopped by the
electronic parking brake or the shift
position being changed to P, the
power switch may turn off and the sys-
tem may be canceled. In this case,
have the vehicle inspected by any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
● If a system malfunction occurs, assis-
tance may be temporarily suspended.
If the system returns to normal, opera-
tion can be resumed. Follow the con-
tent on the smartphone screen to
resume operation.
● If the hybrid system has been started
using a remote start, the remote con-
trol function may not operate properly.
● After Remote control function com-
pletes, the parking brake will be
engaged as per regulations. As the
parking brake may freeze and not be
able to be released, avoid using
Remote control function in extremely
cold areas. Also, if the parking brake
freezes, it may make a noise when it is
released. However, this does not indi-
cate a malfunction.
355
4
4-5. Using the driving support systems
Driving
Cameras and sensors are used to
detect parked vehicles, making it eas-
ier to identify parking spaces.
Front camera
Side cameras
Rear camera
Sensors
P.319
■ Camera images
As special cameras are used, the colors in
displayed images may differ from the actual
color.
■ Precautions for use
For details on the following, refer to “Pan-
oramic view monitor” in the “MULTIME-
DIA OWNER’S MANUAL”.
● Displayable range of the screens
● Cameras
● Differences between displayed images
and the actual road
● Differences between displayed images
and the actual objects
■ Detection range of the cameras and
sensors
● If a parked vehicle is behind the target
parking space and the distance between
it and the vehicle becomes far, it may no
longer be able to be detected. Depend-
ing on shape or condition of a parked
vehicle, the detection range may become
short or the vehicle may not be detected.
● Objects other than parked vehicles, such
as columns, walls, etc., may not be
detected. Also, if they are detected, they
may cause the target parking space to be
misaligned.
NOTICE
● Do not use Remote control function
when the electronic key battery is
depleted.
Types of cameras and sensors
used for the Advanced Park
356
4-5. Using the driving support systems
■ Situations in which parking space lines
may not be recognized properly
● In situations such as the following, park-
ing space lines on the road surface may
not be detected:
• When the parking space does not use
lines (parking space boundaries are
marked with rope, blocks, etc.)
• When the parking space lines are faded
or dirty, making them unclear
• When the road surface is bright, such as
concrete, and the contrast between it and
the white parking space lines is small
• When the parking space lines are any
color other than yellow or white
• When the area surrounding the parking
space is dark, such as at night, in an
underground parking lot, parking
garage, etc.
• When it is raining or has rained and the
road surface is wet and reflective or there
are puddles
• When the sun is shining directly into a
camera, such as in the early morning or
evening
• When the parking space is covered with
snow or de-icing agent
• When there marks from repairs or other
marks on the road surface, or there is a
traffic bollard, or other object on the road
surface
• When the color or brightness of the road
surface is uneven
• When a camera has been splashed by
hot or cold water and the lens has fogged
up
• When the appearance of the parking
space is affected by the shadow of the
vehicle or trees
• When a camera lens is dirty or covered
with water droplets
● In situations such as the following, the tar-
get parking space may not be recog-
nized correctly:
• When there marks from repairs or other
marks on the road surface, or there is a
parking block, traffic bollard, or other
object on the road surface
• When it is raining or has rained and the
road surface is wet and reflective or there
are puddles
• When the area around the vehicle is dark
or backlit
• When the color or brightness of the road
surface is uneven
• When the parking space is on a slope
• When there are diagonal lines (access
aisle) near the parking space
• When the appearance of the parking
space is affected by the shadow of a
parked vehicle (such as shadows from
the grille, side step, etc.)
• When accessories which obstruct the
view of the camera are installed
• When the parking space lines are faded
or dirty, making them unclear
• When the appearance of the parking
space is affected by the shadow of the
vehicle or trees
■ Sensor detection information
P.321
■ Objects which the sensor may not be
properly detected
P.322
■ Situations in which the sensor may not
operate properly
P.322
■ Situations in which parking assistance
may not operate even if there is no pos-
sibility of a collision
P.322
WARNING
■ Precautions for the cameras and sen-
sors
● Due to the characteristics of the cam-
era lens, the position of and distance to
people and objects displayed on the
screen may differ from the actual situa-
tion. For details, refer to “MULTIME-
DIA OWNER’S MANUAL”.
● Make sure to observe the precautions
for using the Lexus parking assist-sen-
sor, otherwise a sensor may not oper-
ate correctly, possibly leading to an
accident. (P.320)
357
4
4-5. Using the driving support systems
Driving
Press the Advanced Park main switch.
If the switch is pressed while assistance is
being performed, the assistance will be
canceled.
■ Operating conditions of the Advanced
Park
Assistance will begin when all of the follow-
ing conditions are met:
● The brake pedal is depressed
● The vehicle is stopped
● The driver’s seat belt is fastened
● The steering wheel is not being operated
● The accelerator pedal is not depressed
● All of the doors and the back door are
closed
● The outside rear view mirrors are not
folded
● The parking brake is not engaged
● The dynamic radar cruise control are not
operating
● ABS, VSC, TRC, PCS and PKSB are not
operating
● The vehicle is not towing a trailer or
another vehicle
● The vehicle is not on a steep slope
● The VSC and TRC are not turned off
If assistance cannot be started, check the
message displayed on the Center Display.
(P.382)
Guidance screens are displayed on
the Center Display.
Guidance screen (When assis-
tance starts)
Target parking space box (blue)
Advice display
Parking type change button
If multiple buttons are displayed, depend-
ing on the condition of the button its func-
tion differs as follows.
WARNING
● In situations such as the following, the
sensors may not operate correctly,
possibly leading to an accident. Pro-
ceed carefully.
• When there is a parked vehicle next to
the target parking space, if the dis-
played target parking space is far from
the actual target parking space, a sen-
sor may be misaligned. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer.
• Do not install any accessories near the
detection area of the sensors.
Turning the Advanced Park sys-
tem on/off
Advanced Park guidance
screens
A
B
C
358
4-5. Using the driving support systems
or : Change the target to another
parking space.
or : Select the current target park-
ing space.
: Select to change to the parallel park-
ing function
: Change the perpendicular parking
(forward/reverse) function
“MODE” button
Select to change between the memory
function and the perpendicular parking
(forward/reverse) function and parallel
parking function. (P.370)
“Start” button
Select to start parking assistance.
Perpendicular parking direction
change button
Select to change between the parking (for-
ward) function and parking (reverse) func-
tion
: Change the perpendicular parking
(forward) function
: Change the perpendicular parking
(reverse) function
Customize setting button
Select to display the Advanced Park set-
ting screen. (P.380)
Registration button
Select to begin registering a parking
space.
Remote control function start but-
ton
*
Select to start parking assistance opera-
tion on the smartphone display.
*
: If equipped
Guidance screen (When reversing)
Operation icon
Displayed when the Advanced Park is
operating.
Guide lines (yellow and red)
Display points from the center of the edge
of the front or rear bumper to the target
stopping position (yellow)
*
and approxi-
mately 0.3 m (1 ft.) (red) from the vehicle.
Moving object warning icon
Emergency support brake control
operation display
“BRAKE!” is displayed.
Lexus parking assist-sensor display
P.319
*
: The yellow lateral line is not displayed
when the target stopping position is
approximately 2.5 m (8.2 ft.) or more
away from the vehicle.
■ Lexus parking assist-sensor pop-up dis-
play
Regardless of whether the Lexus parking
assist-sensor is off or on (P.320), if an
object is detected by the Lexus parking
assist-sensor when the Advanced Park is
operating, the Lexus parking assist-sensor
pop up display will automatically be dis-
played over the guidance display.
D
E
F
G
H
I
A
B
C
D
E
359
4
4-5. Using the driving support systems
Driving
■ Brake control operation when
Advanced Park is operating
While the Advanced Park is operating, if
the system determines that the possibility of
collision with detected moving or stationary
object is high, the hybrid system output
restriction control and brake control will
operate.
If brake control operates, Advanced Park
operation will be suspended and a message
will be displayed on the multi-information
display.
■ Buzzer
Depending on surrounding sounds or
sounds from other systems, it may be diffi-
cult to hear the buzzer of this system.
■ If a black screen is displayed on the
Center Display when the Advanced
Park is operating
The system is being affected by radio waves
or may be malfunctioning. If a radio antenna
is installed near a camera, move it to a loca-
tion as far from the cameras as possible. If a
radio antenna is not installed near a camera,
and the screen does not return to normal
after turning the power switch off and then
starting the hybrid system again, have the
vehicle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or any
reliable repairer.
The perpendicular parking (for-
ward/reverse) function can be used if
the target parking space can be
detected when the vehicle is stopped
close and perpendicular to the center
of the parking space. Also, depending
on the condition of the parking space,
etc., if it is necessary to change the
direction of travel of the vehicle, the
shift position can be changed by assis-
tance control.
1 Stop the vehicle at a position close
and perpendicular to the center of
the target parking space.
If there are parking space lines
Approximately 1 m (3.3 ft.)
*
Approximately 2.5 m (8.2 ft.)
*
Approximately 5 m (16.4 ft.) or
more
*
Approximately 5.5 m (18.0 ft.) or
more
*
The system can operate even if there is a
parking space line on only one side of the
target parking space.
*
: This is a reference measurement for
detection of a parking space. Depending
on the surrounding environment, detec-
tion may not be possible.
Perpendicular parking (for-
ward/reverse) function
Parking using the perpendicular
parking (forward/reverse) func-
tion
A
B
C
D
360
4-5. Using the driving support systems
If there is an adjacent parked vehi-
cle
Approximately 1 m (3.3 ft.)
*
Approximately 3 m (9.8 ft.) or
more
*
Approximately 5 m (16.4 ft.) or
more
*
Approximately 5.5 m (18.0 ft.) or
more
*
The system can operate even if there is a
vehicle on only one side of the target park-
ing space.
*
: This is a reference measurement for
detection of a parking space. Depending
on the surrounding environment, detec-
tion may not be possible.
2 Press the Advanced Park main
switch and check that a possible
parking space is displayed on the
Center Display.
If a space which your vehicle can be
parked is detected, a target parking
space box will be displayed.
If it is possible to parallel park in the
space, select the parking space, and
then select to change to the par-
allel parking function.
If it is possible to change the direc-
tion which a parking space is
entered, select the parking space,
and then select or change
the direction.
Depending on the surrounding
environment, it may not be possible
to use this function. According to
the information displayed on the
Center Display, use the function on
another parking space.
3 Select “Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
A
B
C
D
361
4
4-5. Using the driving support systems
Driving
ing.
When the brake pedal is released,
“Moving Forward…”, “Backing Up…”
will be displayed and the vehicle will
begin moving forward/reverse.
To cancel assistance, press the
Advanced Park main switch.
If assistance is canceled, “Advanced Park
Canceled” will be displayed.
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
son, or gutter: P.361
4 Perform operations as indicated by
the advice displays until the vehicle
stops in the target parking space.
When the vehicle stops, “Advanced Park
Finished” will be displayed and parking
assistance will end.
If you select on the Center Display, the
vehicle displayed on the parking assist
completion screen will rotate.
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
object, person, or gutter
Depress the brake pedal to stop the vehicle
and then change the shift position to
change the direction of travel of the vehicle.
At this time, assist will be suspended. How-
ever, if the “Start” button is selected, assist
will resume and the vehicle will move in the
direction corresponding to the selected
shift position.
■ When the brakes have been operated
When the brakes have been operated,
brake operation sound may be heard. This
does not indicate a malfunction.
NOTICE
■ When using the perpendicular park-
ing (forward/reverse) function
● Make sure that there are no obstruc-
tions within the yellow guide lines and
between the vehicle and target park-
ing spot. If there are any obstructions
between the vehicle and the target
parking space, or between the yellow
guide lines, cancel the function.
● As the target parking space will not be
able to be set correctly if the surface of
the parking space is on a slope or has
differences in height, the vehicle may
stray from the target parking space or
be slanted. Therefore, do not use the
function for this kind of parking spot.
● When parking in a narrow parking
space, the vehicle may closely
approach an adjacent parked vehicle.
If a collision seems likely, depress the
brake pedal to stop the vehicle.
362
4-5. Using the driving support systems
When exiting from a perpendicular
parking space, if the system deter-
mines that exit is possible the perpen-
dicular exiting (forward/reverse)
function can be used. Also, depending
on the surrounding environment, if it is
necessary to change the direction of
travel of the vehicle, the shift position
can be changed by assistance control.
1 With the brake pedal depressed
and P shift position selected, press
the Advanced Park main switch
and check that the exit direction
selection screen is displayed on the
Center Display.
2 Select an arrow on the Center Dis-
play to select the direction you wish
to exit.
If the turn signal lever is operated, only exit
to the left or right can be selected.
3 Depress the brake pedal and select
“Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
ing.
To cancel assistance, press the Advanced
Park main switch. If assistance is canceled,
“Advanced Park Canceled” will be dis-
played.
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
NOTICE
● If a detected parked vehicle is narrow
or parked extremely close to the curb,
the position at which assistance will
park the vehicle will also be close to
the curb. If it seems likely the vehicle
will collide with something or drive off
of the road, depress the brake pedal to
stop the vehicle, and then press the
Advance Park main switch to disable
the system.
Advanced Park perpendicular
exiting (forward/reverse) func-
tion
Leaving a parking space using the
perpendicular exiting (for-
ward/reverse) function
363
4
4-5. Using the driving support systems
Driving
son, or gutter: P.361
4 Perform operations as indicated by
the advice displays until the vehicle
is in a position where exit is possi-
ble.
When the vehicle reaches a position
where exit is possible, “You can exit by
moving the steering wheel” will be dis-
played. If the steering wheel is operated,
“Advanced Park Finished” will be dis-
played and assistance will end. As assis-
tance will end while the vehicle is moving,
grip the steering wheel and drive forward.
If the steering wheel is not operated, the
vehicle will stop at the exit position. Assis-
tance can be ended by depressing the
accelerator pedal or brake pedal.
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
object, person, or gutter
P.361
■ Perpendicular exiting (for-
ward/reverse) function
Do not use perpendicular exiting (for-
ward/reverse) function in any situation
other than when exiting a perpendicular
parking spot. If assistance is started unin-
tentionally, depress the brake pedal and
stop the vehicle, then press the Advanced
Park main switch to cancel assistance.
■ Situations in which the perpendicular
exiting (forward/reverse) function will
not operate
In situations such as the following, the per-
pendicular exiting (forward/reverse) func-
tion will not operate:
● When a vehicle which is waiting to park is
in the exit direction
● When a wall, column, or person is
detected as near a front or rear center or
corner sensor
■ When the brakes have been operated
P.361
The parallel parking function can be
used if the target parking space can be
detected when the vehicle is stopped
close and aligned with the center of the
parking space. Also, depending on the
condition of the parking space, etc., if it
is necessary to change the direction of
travel of the vehicle, the shift position
can be changed by assistance control.
Advanced Park parallel parking
function
364
4-5. Using the driving support systems
1 Stop the vehicle with it aligned near
the center of the target parking
space.
If there are parking space lines
Approximately 1 m (3.3 ft.)
*
Approximately 5 m (16.4 ft.)
*
Approximately 4.5 m (14.8 ft.) or
more
*
Approximately 8 m (26.2 ft.) or
more
*
*
: This is a reference measurement for
detection of a parking space. Depending
on the surrounding environment, detec-
tion may not be possible.
If there is an adjacent parked vehi-
cle
Approximately 1 m (3.3 ft.)
*
Approximately 6 m (19.7 ft.)
*
or
more
Approximately 4.5 m (14.8 ft.) or
more
*
Approximately 8 m (26.2 ft.) or
more
*
*
: This is a reference measurement for
detection of a parking space. Depending
on the surrounding environment, detec-
tion may not be possible.
2 Press the Advanced Park main
switch and check that a possible
Parking using the parallel parking
function
A
B
C
D
A
B
C
D
365
4
4-5. Using the driving support systems
Driving
parking space is displayed on the
Center Display.
If a space which your vehicle can be
parked is detected, a target parking
space box will be displayed.
If it is possible to perpendicular
parking (forward/reverse) in the
space, select the parking space, and
then select to change to the per-
pendicular parking (for-
ward/reverse) function.
Depending on the surrounding
environment, it may not be possible
to use this function. According to
the information displayed on the
Center Display, use the function on
another parking space.
3 Select “Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
ing.
When the brake pedal is released,
“Moving Forward…” will be dis-
played and the vehicle will begin
moving forward.
To cancel assistance, press the
Advanced Park main switch.
If assistance is canceled, “Advanced Park
Canceled” will be displayed.
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
son, or gutter: P.361
4 Perform operations as indicated by
the advice displays until the vehicle
stops in the target parking space.
When the vehicle stops, “Advanced Park
Finished” will be displayed and parking
assistance will end.
If you select on the Center Display, the
vehicle displayed on the parking assist
completion screen will rotate.
366
4-5. Using the driving support systems
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
object, person, or gutter
P.361
■ If “No available parking space” is dis-
played
Even if the vehicle is stopped parallel to a
parking space, an adjacent parked vehicle
may not be detected. In this case, if the vehi-
cle is moved to a position that a parked
vehicle can be detected, assistance can be
started.
■ When the brakes have been operated
P.361
When exiting from a parallel parking
space, if the system determines that
exit is possible the parallel exiting func-
tion can be used. Also, depending on
the surrounding environment, if it is
necessary to change the direction of
travel of the vehicle, the shift position
can be changed by assistance control.
NOTICE
■ When using the parallel parking func-
tion
● Make sure that there are no obstruc-
tions within the yellow guide lines and
between the vehicle and target park-
ing spot. If any obstructions are
detected within the yellow guide lines
or between the vehicle and the target
parking space, the parallel parking
function will be cancelled or sus-
pended.
● As the target parking space will not be
able to be set correctly if the surface of
the parking space is on a slope or has
differences in height, the vehicle may
stray from the target parking space or
be slanted. Therefore, do not use the
parallel parking function for this kind of
parking spot.
● If an adjacent parked vehicle is narrow
or parked extremely close to the curb,
the position at which assistance will
park the vehicle will also be close to
the curb. If it seems likely the vehicle
will collide with the curb or drive off of
the road, depress the brake pedal to
stop the vehicle, and then press the
Advanced Park main switch to disable
the system.
● If there is a wall or other barrier on the
inner side of the parking space, the
vehicle may stop at a position slightly
outside of the set target parking space.
Advanced Park parallel exiting
function
367
4
4-5. Using the driving support systems
Driving
1 With the brake pedal depressed
and P shift position selected, press
the Advanced Park main switch
and check that the exit direction
selection screen is displayed on the
Center Display.
2 Select an arrow on the Center Dis-
play to select the direction you wish
to exit.
If the turn signal lever is operated, only exit
to the left or right can be selected.
3 Depress the brake pedal and select
“Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
ing.
To cancel assistance, press the Advanced
Park main switch.
If assistance is canceled, “Advanced Park
Canceled” will be displayed.
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
son, or gutter: P.361
4 Perform operations as indicated by
the advice displays until the vehicle
is in a position where exit is possi-
ble.
When the vehicle reaches a position
where exit is possible, “You can exit by
moving the steering wheel” will be dis-
played. If the steering wheel is operated,
“Advanced Park Finished” will be dis-
played and assistance will end.
As assistance will end while the vehicle is
moving, grip the steering wheel and drive
forward.
If the steering wheel is not operated, the
vehicle will stop at the exit position. Assis-
tance can be ended by depressing the
accelerator pedal or brake pedal.
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
object, person, or gutter
P.361
■ Parallel exiting function
Do not use parallel exiting function in any
situation other than when exiting a parallel
parking spot. If assistance is started unin-
Leaving a parking space using the
parallel exiting function
368
4-5. Using the driving support systems
tentionally, depress the brake pedal and
stop the vehicle, then press the Advanced
Park main switch to cancel assistance.
■ Situations in which the parallel exiting
function will not operate
In situations such as the following, the paral-
lel exiting function will not operate:
● When vehicles waiting at a traffic signal in
the exit direction
● When a vehicle is stopped in the area
behind where the vehicle will exit
● When a wall, column, or person is
detected as near a front or rear side sen-
sor
● When the vehicle has been parked on a
curb and a side sensor detects the road
surface
● When a vehicle is not parked in front of
the vehicle
● When there is excessive space between
the front of the vehicle and a parked vehi-
cle
■ When the brakes have been operated
P.361
The memory function can be used to
park in a previously registered parking
space, even if there are no parking
space lines or adjacent parked vehi-
cles.
Up to 3 parking spaces can be regis-
tered.
1 Stop the vehicle with it aligned near
the center of the target parking
space.
Advanced Park memory func-
tion
Registering a parking space
369
4
4-5. Using the driving support systems
Driving
Approximately 1 m (3.3 ft.)
2 Press the Advanced Park main
switch and then select .
If the Advanced Park main switch is
pressed at a parking space without parking
lines or any adjacent parked vehicles, “No
available parking space” may be displayed.
Continuously select and hold .
3 Select perpendicular parking (for-
ward/reverse) function or parallel
parking function.
Only parking spaces for which assist can
be performed are displayed.
4 Select the parking direction, and
then select “OK” button.
When perpendicular parking (for-
ward/reverse) was selected in step
3:
When parallel parking was selected in step
3:
5 Using the arrow buttons, adjust the
position of the parking space to be
registered, and then select “OK”
button.
6 Select “Start” button.
A buzzer will sound, an operation message
will be displayed on the multi-information
display, and assistance will begin operat-
ing. When the brake pedal is released,
“Moving Forward…” will be displayed and
the vehicle will begin moving forward.
A
370
4-5. Using the driving support systems
If you feel that the vehicle is approaching
close to a surrounding vehicle, object, per-
son, or gutter: P.361
7 Perform operations as indicated by
the advice displays until the vehicle
stops in the target parking space.
8 Check the position that the vehicle
has stopped. If necessary, adjust
the position of the parking spot to
be registered using the arrow but-
tons, and then select “Reg.” button.
“Registration Completed” will be displayed
on the Center Display.
Register the parking space only if
there are no obstructions within the
area shown by the thick lines.
The amount that the position of the
parking spot to be registered can be
adjusted is limited.
1 Stop the vehicle with it aligned near
the center of the target parking
space.
Approximately 1 m (3.3 ft.)
2 Press the Advanced Park main
switch and check that a possible
parking space is displayed on the
Center Display.
If the “MODE” button is displayed, the but-
ton can be touched to change between the
memory function, perpendicular parking
(forward/reverse) function and parallel
When parking in a parking space
registered to the memory func-
tion
A
371
4
4-5. Using the driving support systems
Driving
parking function.
3 Select the desired parking space,
and then select “Start” button.
Perform the procedure for the perpendic-
ular parking (forward/reverse) function
from step
3. (P.359)
■ If you feel that the vehicle is approach-
ing close to a surrounding vehicle,
object, person, or gutter
P.361
■ When overwriting a registered parking
space
If the maximum number of parking spaces
have been registered and is selected, a
registered parking space can be selected
and then overwritten with a new parking
space.
■ When multiple parking spaces are reg-
istered
Select the desired parking space, and then
select “Start” button.
■ When the brakes have been operated
P.361
NOTICE
■ When using the memory function
(P.361, 366)
● The memory function is a function
which provides assistance in parking in
a previously registered parking space.
If the condition of the road surface,
vehicle, or surrounding area differs
from when registration was per-
formed, the parking space may not be
able to be detected correctly or assis-
tance may not be provided to the point
that the vehicle is fully parked.
● Do not register a parking space in situ-
ations such as the following, as the set
parking space may not be able to be
registered or assistance may not be
possible later.
• When a camera lens is dirty or cov-
ered with water droplets
• When it is raining or snowing
• When the surrounding area is dark (at
night, etc.)
● In situations such as the following, it
may not be possible to register a park-
ing space.
• When there is insufficient space
between the road and parking space
• When the road surface around the
parking space does not have any dif-
ferences the system can recognize
372
4-5. Using the driving support systems
NOTICE
● If a parking space has been registered
in situations such as the following,
assistance may not be able to be
started later or assistance to the regis-
tered position may not be possible.
• When shadows are cast on the park-
ing space (there is a carport over the
parking space, etc.)
• When there are leaves, garbage, or
other objects which will likely move, in
the parking space
• When the road surface around the
parking space has the same repeating
pattern (brick, etc.)
● In situations such as the following, it
may not be possible for the system to
provide assistance to a registered
parking spot:
• When the appearance of the parking
space is affected by the shadow of the
vehicle or trees
• When an object is detected in the reg-
istered parking space
• When a pedestrian or passing vehicle
is detected during assistance
• When the position the vehicle is
stopped when assistance is started dif-
fers from the position when registra-
tion was performed
• When the registered parking space
cannot be reached due to the exis-
tence of parking blocks, etc.
• When the road surface around the
parking space has changed (road sur-
face has degraded or been resur-
faced)
• When the sunlight conditions differ
from when registration was performed
(due to weather or time of day)
• When the sun is shining directly into a
camera, such as in the early morning
or evening
• When the color or brightness of the
road surface is uneven
• When a light is temporarily shined on
the parking space (lights of another
vehicle, security light, etc.)
• When the road surface around the
parking space has the same repeating
pattern
• When there is a low protrusion on the
road surface near the parking space
• When the parking space is on a slope
• When a camera has been splashed by
hot or cold water and the lens has
fogged up
• When a camera lens is dirty or cov-
ered with water droplets
• When accessories which obstruct the
view of the camera are installed
If assistance is ended during registra-
tion, perform registration again.
373
4
4-5. Using the driving support systems
Driving
A smartphone can be used to remotely
operate the parking functions and exit
functions. Also, assistance can be pro-
vided to remotely move the vehicle
forward or backward into a garage,
etc.
A smartphone can be used to remotely
operate the parking function if the tar-
get parking space can be detected
when the vehicle is stopped close and
perpendicular to the center of the
parking space. Also, depending on the
condition of the parking space, etc., if it
is necessary to change the direction of
travel of the vehicle, the shift position
can be changed by assistance control.
1 Stop the vehicle with it aligned near
the center of the target parking
space. (P.359, 364)
2 Press the Advanced Park main
switch and check that a possible
parking space is displayed on the
Center Display. (P.359, 364)
3 Select and then select “Perpen-
dicular/parallel”.
4 Select “OK” button.
5 Exit the vehicle while carrying the
electronic key and smartphone,
and then start the dedicated app.
The detection area of the electronic key is
within approximately 3 m (9.8 ft.) around
the vehicle.
If there is an obstruction in the path of the
vehicle, move it before parking the vehicle.
An obstruction can also be moved after
exiting the vehicle.
6 From outside of the vehicle, con-
firm the parking space on the
screen of the smartphone and then
execute the start operation.
Start operation of Remote control function
while standing approximately 50 cm (1.6
ft.) or more from the vehicle and out of the
path of the vehicle.
7 Checking the safety of the area
around the vehicle, operate the
screen of the smartphone.
While continuously operating the
operation area, the vehicle will
move and parking assistance will
be performed.
NOTICE
● When registering a parking space to
the memory function, if the road sur-
face cannot be detected “No available
parking space to register” will be dis-
played.
● When using the memory function,
make sure to stop immediately in front
of the stop position. Otherwise the
parking space may not be able to be
detected correctly or assistance may
not be provided to the point that the
vehicle is fully parked.
● Do not use the memory function if a
camera has been subjected to a strong
impact or images of the panoramic
view monitor are misaligned.
● If a camera has been replaced, as the
installation angle of the camera will
have changed, it will be necessary to
reregister parking spaces of the mem-
ory function.
Remote control function (if
equipped)
Parking using Remote control
function
374
4-5. Using the driving support systems
If operation of the screen of the smart-
phone is stopped, assistance can be sus-
pended and the vehicle can be stopped.
When the operation of the screen of the
smartphone is resumed to move the vehi-
cle, the vehicle will be locked automatically
before moving.
8 When the parking space is
reached, after the vehicle is
stopped by the parking brake, the
shift position will be changed to P,
the power switch will be turned off,
and the doors will be locked.
A completion screen will be displayed on
the smartphone.
■ The parking function can be used even if
obstructions exist if
● When using the parking functions at a
parking space made of white lines, even if
an obstruction exists in the parking
space, the space can be set as the target
parking space. This allows for assistance
to continue after setting a parking space
from inside the vehicle and then exiting
the vehicle to move an obstruction, such
as a traffic cone placed in a handicapped
parking space.
● When perpendicular parking using
Advanced Park, 3 parking spaces on
each side of the vehicle (up to 6 total) can
be detected. However, when using
Remote control function, only 1 parking
space on each side of the vehicle can be
detected.
■ When the brakes have been operated
P.361
After the vehicle is stopped, assistance
can be provided to move the vehicle
into a garage, etc., by using the forward
and backward movement function.
1 Stop the vehicle at the location you
would like to start assistance.
2 Press the Advanced Park main
switch.
3 Select and then select “For-
ward/reverse”.
4 Adjust as necessary using direction
keys then select “OK” button.
5 Exit the vehicle while carrying the
electronic key and smartphone,
and then start the dedicated app.
The detection area of the electronic key is
within approximately 3 m (9.8 ft.) around
the vehicle.
6 From outside of the vehicle, con-
firm the direction of travel on the
screen of the smartphone and then
execute the start operation.
Start operation of Remote control function
while standing approximately 50 cm (1.6
ft.) or more from the vehicle and out of the
path of the vehicle. The detection area of
the electronic key is within approximately
3 m (9.8 ft.) around the vehicle.
7 Checking the safety of the area
around the vehicle, operate the
screen of the smartphone.
While continuously operating the opera-
tion area, the vehicle will move and for-
Moving the vehicle forward and
backward using Remote control
function
375
4
4-5. Using the driving support systems
Driving
ward and reverse movement assistance
will be performed.
If operation of the screen of the smart-
phone is stopped, assistance can be sus-
pended and the vehicle can be stopped.
While assistance is being performed, it can
be stopped part way or the direction of
travel of the vehicle can be changed.
8 Execute the power-off operation of
the vehicle on the screen of the
smartphone. The power switch will
then turn OFF and the doors will
lock automatically.
■ Changing the direction of travel
While assistance is being performed, the
direction of travel of the vehicle can be
changed by the forward and reverse move-
ment function.
When there is a wall behind the vehicle,
etc., by executing a change in the direction
of travel on the screen of the smartphone,
the vehicle can be slightly moved forward
to allow loading of items and then moved
back to its original position.
■ When the brakes have been operated
P.361
Assistance can be provided to exit
from a perpendicular or parallel park-
ing space when the power switch OFF.
When forward and backward move-
ment is selected, the maximum dis-
tance the vehicle can move is 7 m
(23.0 ft.) from the starting point and
possible to change the direction of
travel.
1 While near the parked vehicle,
unlock the doors using the elec-
tronic key, and then start the dedi-
cated app.
If the dedicated app cannot connect to the
vehicle, use the electronic key to unlock
the doors again.
2 Execute the start operation on the
screen of the smartphone.
The power switch will change to ON.
3 Check that a possible exit direction
is displayed, select the exit direc-
tion.
4 Checking the safety of the area
around the vehicle, operate the
screen of the smartphone.
While continuously operating the opera-
tion area, the vehicle will move and depar-
ture assistance will be performed.
If operation of the screen of the smart-
phone is stopped, assistance can be sus-
pended and the vehicle can be stopped.
While assistance is being performed it can
be stopped part way or the direction of
travel of the vehicle can be changed.
5 Move the vehicle to the position
where assistance ends and enter
the vehicle while carrying the elec-
tronic key.
To stop assistance part way, stop operating
the smartphone or enter the vehicle.
Exiting using Remote control
function
376
4-5. Using the driving support systems
■ When the brakes have been operated
P.361
A smartphone can be used to remotely
operate the memory function if the tar-
get parking space can be detected
when the vehicle is stopped close to a
parking space which was previously
registered to the memory function.
Also, depending on the condition of
the parking space, etc., if it is necessary
to change the direction of travel of the
vehicle, the shift position can be
changed by assistance control.
1 Stop the vehicle with it aligned near
the center of the target parking
space. (P.370)
2 Press the Advanced Park main
switch and check that a possible
parking space is displayed on the
Center Display. (P.370)
3 Select and then select “Perpen-
dicular/parallel”.
4 Select “OK” button.
If the “MODE” button is displayed, the but-
ton can be selected to change between the
memory function, perpendicular parking
(forward/reverse) function and parallel
parking function.
5 Exit the vehicle while carrying the
electronic key and smartphone,
and then start the dedicated app.
The detection area of the electronic key is
within approximately 3 m (9.8 ft.) around
the vehicle. If there is a cone or other
obstruction in the path of the vehicle, move
it after exiting the vehicle.
6 From outside of the vehicle, con-
firm the parking space on the
screen of the smartphone and then
execute a start operation.
Start operation of Remote control function
while standing approximately 50 cm (1.6
ft.) or more from the vehicle and out of the
path of the vehicle.
7 Checking the safety of the area
around the vehicle, operate the
screen of the smartphone.
While continuously operating the opera-
tion area, the vehicle will move and parking
assistance will be performed.
If operation of the screen of the smart-
phone is stopped, assistance can be sus-
pended and the vehicle can be stopped.
When the operation of the screen of the
smartphone is resumed to move the vehi-
cle, the vehicle will be locked automatically
before moving.
8 When the parking space is
reached, after the vehicle is
stopped by the parking brake, the
shift position will be changed to P,
the power switch will be turned off,
and the doors will be locked.
A completion screen will be displayed on
the smartphone.
■ When the brakes have been operated
P.361
■ Preparation before using
Make sure to perform the following
before using Remote control function:
Parking using the Remote con-
trol function and memory func-
tion
Preparation before using
Remote control function
377
4
4-5. Using the driving support systems
Driving
1 Download the dedicated app from
the app store.
2 Turn the power switch to ON and
register the smartphone as a
Bluetooth
®
device to the Center
Display.
For details on registering a Bluetooth
®
device, refer to the “MULTIMEDIA
OWNER’S MANUAL”.
3 Start the dedicated app and regis-
ter the vehicle.
4 The registered vehicle will be dis-
played on the screen of the smart-
phone. Select the vehicle.
The name and image of the vehicle can be
changed on the new vehicle registration
screen.
Vehicles can be added through the menu
screen.
■ Remote control function on/off
1 Select and then select
“Advanced Park” on the Center
Display.
2 Select “Remote Park” to turn it
on/off. (The default setting is on.)
3 Press the Advanced Park main
switch.
If the switch is pressed while assistance is
being performed, the assistance will be
canceled.
4 Select the button displayed on
the Center Display.
NOTICE
■ Remote control function
● When using Remote control function,
make sure carry an electronic key in
your pocket, etc.
● If an electronic key is held together
with a smartphone, etc., the electronic
key may not be able to be detected.
● Vehicles with a digital key: Remote
control function cannot be used when
carrying only a digital key. The driver
should always carry the electronic key.
● When entering the vehicle after using
Remote control function, make sure
that the electronic key is brought into
the vehicle and all of the doors are
closed.
Vehicles with a power easy access
system: After entering the vehicle and
ending Remote control function oper-
ation, the seat return function will
operate when the driver’s seat belt is
fastened or the brake pedal is
depressed.
378
4-5. Using the driving support systems
■ Assistance will be canceled when
In situations such as the following,
Advanced Park operation will be can-
celed. Firmly hold the steering wheel
and depress the brake pedal to stop
the vehicle.
As system operation has been can-
celed, begin the operation again or
continue parking manually, using the
steering wheel.
The Advanced Park main switch is
pushed
The shift position has been changed
to P
The parking brake is engaged
A door or the back door is opened
The driver’s seat belt is unfastened
The outside rear view mirrors are
folded
The TRC or VSC is turned off
The TRC, VSC or ABS operates
The vehicle is towing a trailer or
another vehicle
NOTICE
● If the power switch is turned off when
Remote control function operation has
finished or been canceled, the doors
will be locked automatically. However,
if a door is open, it may not be locked.
Check the vehicle condition after
Remote control function operation has
finished.
● When the doors are locked after
Remote control function operation has
finished or been canceled, an alarm
may sound if someone is detected
inside the vehicle.
■ Situations in which the function may
not operate correctly
● When the functions of the smart entry
& start system may not operate cor-
rectly (P.151)
● When the vehicle is near fluorescent
lights
● Radio wave interference: P.153
■ Electronic key battery consumption
● When Remote control function is
being used, the electronic key battery
will be used as the electronic key will
continuously send and receive radio
waves.
● If the electronic key battery is
depleted: P.474
■ Situations in which the sensors may
not operate properly (P.322)
● When using Remote control function,
visibility of the area around the vehicle
may be limited. Make sure to check
the following when using Remote con-
trol function:
• The vehicle and area around the vehi-
cle are clearly visible
• There are no people, animals, or
objects in the path of the vehicle
• An appropriate distance from the
vehicle can be maintained and the
safety of yourself and others can be
ensured
• Caution for the area around the vehi-
cle is always maintained and there is
no potential for danger
• You can cancel Remote control func-
tion immediately if necessary
Advanced Park cancela-
tion/suspension
379
4
4-5. Using the driving support systems
Driving
The power switch is pressed
The system determines assistance
cannot be continued in the current
parking environment
The system malfunctions
While the vehicle was stopped,
“Cancel” was selected on the Cen-
ter Display
■ Assistance will be suspended when
In situations such as the following,
Advanced Park operation will be sus-
pended.
Assistance can be started again by fol-
lowing the directions displayed on the
Center Display.
Also, when assistance is suspended, if
the shift position is changed twice with
the brake pedal depressed, assistance
will be canceled in that shift position.
However, if assistance is suspended by
changing the shift position, assistance
will be canceled if the shift position is
changed once.
The steering wheel is operated
The accelerator pedal is depressed
The shift position has been changed
A moving object or stationary
object that may collide with your
vehicle has been detected, resulting
in the operation of the hybrid system
output control/braking control.
Camera switch is pressed
■ Remote control function assis-
tance (if equipped) will be can-
celed when
In situations such as the following,
Remote control function operation will
be canceled.
As system operation has been can-
celed, while carrying an electronic key,
enter the vehicle and park the vehicle
manually, using the steering wheel.
When a condition for stopping
Advanced Park assistance is met,
with the exception suspension due
to a door being opened or the
driver’s seat belt being released
When 5 minutes have elapsed since
Remote control function operation
was started
When 3 minutes have elapsed since
any operation was performed
When 30 seconds have elapsed
with the vehicle not being able to be
driven, even though the screen of
the smartphone is being operated to
drive the vehicle
When the power-off operation of
the vehicle is executed on the
screen of the smartphone
When the dedicated app is force
closed
When the vehicle is on a steep slope
When an electronic key is detected
inside the vehicle while Remote
control function operation is sus-
pended
When the ambient temperature is -
380
4-5. Using the driving support systems
10°C (14°F) or less
■ Remote control function assis-
tance (if equipped) will be sus-
pended when
In situations such as the following,
assistance will be suspended.
When the Bluetooth
®
communica-
tion between the smartphone and
multimedia system get lost
When an operation on the smart-
phone is suspended
When the dedicated app is pushed
to the background (a call is
received, the home button is
pressed, etc.)
When electronic key does not
detected
When there is an obstruction in the
movement direction of the vehicle
When the vehicle is operated while
it is being driven by assistance
When the electronic key is oper-
ated while it is being driven by assis-
tance
When the door is unlocked while it
is being driven by assistance
When a door is opened while the
vehicle is being driven
Press the Advanced Park main switch,
and select on the Center Display,
and then select “Advanced Park”.
■ Remote Park (if equipped)
Remote control function can be turned
on/off.
■ Speed profile
The vehicle speed for when assistance
is performed can be set.
This setting cannot be changed when
registering a parking space to the
memory function.
■ Obstacle detection range
The distance from which obstacles will
be avoided while assistance is being
performed can be set.
■ Preferred parking method
The preferred parking method dis-
played when at a parking space which
perpendicular (forward/reverse) or
parallel parking is possible can be set.
■ Preferred parking direction
The preferred parking direction dis-
played when it is possible to pull per-
pendicular forward or reverse into a
parking space can be selected.
■ Preferred exit direction (perpen-
dicular)
The preferred exit direction displayed
when it is possible to pull forward or
reverse to the left or right out of a park-
ing space can be selected.
■ Preferred exit direction (parallel)
The preferred exit direction displayed
when it is possible to exit to the left or
right from a parallel parking space can
be selected.
Changing the Advanced Park
settings
381
4
4-5. Using the driving support systems
Driving
■ Camera view when parking
The display angle of the camera image
when using the perpendicular parking
(forward/reverse) function or parallel
parking function can be set.
■ Camera view when exiting
The display angle of the camera image
when using the perpendicular exiting
(forward/reverse) function or parallel
parking exit function can be set.
■ Parking path adjustment
The course for when parking assis-
tance is operating can be adjusted
inward or outward.
If the tires are worn, the path of vehicle
may be offset from the center of the
parking space. In this case, use this set-
ting to adjust the parking course.
■ Road width adjustment
When parking assistance is started, the
amount of lateral movement while the
vehicle is moving forward can be
adjusted.
■ Park position adjustment (forward)
The position at which perpendicular
parking (forward) is completed can be
adjusted. (Except when using the
memory function.)
■ Park position adjustment (reverse)
The position at which perpendicular
parking (reverse) is completed can be
adjusted. (Except when using the
memory function.)
■ Rear accessory setting
If an accessory, such as a trailer hitch,
has been installed to the rear of the
vehicle, the length of the rear of the
vehicle can be adjusted to help avoid
colliding with objects to the rear of the
vehicle.
■ Clear registered parking space
The parking spaces registered to the
memory function can be deleted. Park-
ing space information cannot be
deleted when assistance is being per-
formed or when registering parking
space information to the memory func-
tion.
■ Lexus parking assist-sensor warn-
ing sound ON/OFF (Smartphone
setting)
The warning sounds of the Lexus park-
ing assist-sensor from the dedicated
app can be enabled/disabled.
NOTICE
● Take care when using the park posi-
tion adjustment (forward) or park posi-
tion adjustment (reverse) for adjusting
because the vehicle may collide with
parking blocks, curb stones, or other
low objects.
● If it is likely that your vehicle will collide
with a nearby vehicle/object, parking
block, curb stone, etc., depress the
brake pedal to stop the vehicle and
press the Advanced Park main switch
to disable the system.
Changing the dedicated app set-
tings (for Remote control func-
tion)
382
4-5. Using the driving support systems
■ Lexus parking assist-sensor warn-
ing sound volume adjustment
(Smartphone setting)
The volume of the warning sounds of
the Lexus parking assist-sensor can be
adjusted from the dedicated app.
The operating state, assistance opera-
tion, etc. of the Advanced Park is dis-
played on the Center Display. If a
message is displayed, respond accord-
ing to the content displayed.
■ If “No available parking space” is dis-
played
Move the vehicle to a location where a
parking space or parking lines can be
detected.
■ If “Unavailable in current condition” is
displayed
Move the vehicle to another location and
use the system.
■ If “Not enough space to exit” is dis-
played
The parallel parking exit function cannot be
used due to a situation such as the distance
between your vehicle and vehicles parked
in front of and behind your vehicle being
short, the existence of an object in the exit
direction, etc.
Check the conditions of the area around
your vehicle and exit from the parking
space manually.
■ If “Cannot control speed” is displayed
The system judged that it cannot adjust the
speed of the vehicle when using the system
in an area with a slope or step and assis-
tance was canceled.
Use the system in a level location.
■ If “Obstacle detected” is displayed
As a moving object or stationary object that
may collide with your vehicle has been
detected, the hybrid system output con-
trol/braking control operates to suspend
Advanced Park assistance.
Check the condition of the surrounding
area. To resume assistance, select the
“Start” button on the Center Display.
■ If “No available parking space to regis-
ter” is displayed
This message is displayed when is
selected at a parking space that cannot be
detected.
Operate the system at a parking space
where differences in the road surface can
be recognized. (P.368)
Advanced Park displayed mes-
sages
383
4
4-5. Using the driving support systems
Driving
*
: If equipped
■ If “Exhaust Filter Full See Owner’s Man-
ual” is shown on the multi-information
display
● The message may be displayed while
high load driving with particulate matter
accumulating.
● Hybrid system output (engine speed) is
restricted when a certain amount of par-
ticulate matter accumulates, however, it
is possible to drive the vehicle unless the
malfunction indicator lamp comes on.
● Particulate matter can accumulate more
quickly if the vehicle is frequently driven
short trips or at low speeds, or if the
hybrid system is regularly started in an
extremely cold environment. Excessive
accumulation of particulate matter can
be prevented by periodically driving long
distances continuously with intermittent
releasing of the accelerator pedal, such
as when driving on highways and free-
ways.
■ If the malfunction indicator lamp comes
on or “Hybrid system malfunction Out-
put Power Reduced Visit Your Dealer”
is shown on the multi-information dis-
play
The amount of accumulated particulate
matter has exceeded a certain level. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
GPF (Gasoline Particulate
Filter) system
*
The GPF system collects particu-
late matter in the exhaust gas by
using an exhaust gas filter. The sys-
tem will operate to regenerate the
filter automatically, depending on
the vehicle conditions.
NOTICE
■ To prevent the GPF system from not
operating properly
● Do not use fuel other than the speci-
fied type
● Do not modify the exhaust pipes
384
4-5. Using the driving support systems
■ ECB (Electronically Controlled
Brake System)
The electronically controlled system
generates braking force correspond-
ing to the brake operation
■ ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the
brakes are applied suddenly, or if the
brakes are applied while driving on a
slippery road surface
■ Brake assist
Generates an increased level of brak-
ing force after the brake pedal is
depressed when the system detects a
panic stop situation
■ VSC (Vehicle Stability Control)
Helps the driver to control skidding
when swerving suddenly or turning on
slippery road surfaces
■ VSC + (Vehicle Stability Control +)
Provides cooperative control of the
ABS, TRC, VSC and EPS.
Helps to maintain directional stability
when swerving on slippery road sur-
faces by controlling steering perfor-
mance.
■ Trailer Sway Control (vehicles with
towing package)
Helps the driver to control trailer sway
by selectively applying brake pressure
for individual wheels and reducing
driving torque when trailer sway is
detected.
■ TRC (Traction Control)
Helps to maintain drive power and
prevent the drive wheels from spinning
when starting the vehicle or accelerat-
ing on slippery roads
■ Active Cornering Assist (ACA)
Helps to prevent the vehicle from drift-
ing to the outer side by performing
inner wheel brake control when
attempting to accelerate during cor-
nering
■ Hill-start assist control
Helps to reduce the backward move-
ment of the vehicle when starting on an
uphill
■ EPS (Electric Power Steering)
Employs an electric motor to reduce
the amount of effort needed to turn the
steering wheel
■ E-Four (Electronic On-Demand
AWD system) (AWD models)
Automatically controls the drive sys-
tem such as to front-wheel drive or
AWD (all wheel drive) according to
Driving assist systems
To keep driving safety and perfor-
mance, the following systems oper-
ate automatically in response to
various driving situations. Be
aware, however, that these systems
are supplementary and should not
be relied upon too heavily when
operating the vehicle.
Summary of the driving assist
systems
385
4
4-5. Using the driving support systems
Driving
various running conditions including
normal driving, during cornering, on a
uphill, when starting off, during accel-
eration, on a slippery roads due to
snow or rain, thus contributing to sta-
ble operability and driving stability.
■ Emergency brake signal
When the brakes are applied suddenly,
the stop lights automatically flash to
alert the vehicle behind.
■ The Secondary Collision Brake
When the airbag sensor detects a colli-
sion, the brakes and brake lights are
automatically controlled to reduce the
vehicle speed and that helps reduce
the possibility of further damage due to
a secondary collision.
■ When the TRC/VSC/ABS/Trailer
Sway Control (vehicles with towing
package) systems are operating
The slip indicator light will flash while the
TRC/VSC/ABS/Trailer Sway Control sys-
tems are operating.
■ Disabling the TRC system
If the vehicle gets stuck in mud, dirt or snow,
the TRC system may reduce power from
the hybrid system to the wheels. Pressing
the switch to turn the system off may
make it easier for you to rock the vehicle in
order to free it.
To turn the TRC system off, quickly press
and release the switch.
The “Traction Control Turned OFF” will be
shown on the multi-information display.
Press the switch again to turn the sys-
tem back on.
■ Turning off both TRC, VSC and Trailer
Sway Control (vehicles with towing
package) systems
To turn the TRC, VSC and Trailer Sway
Control systems off, press and hold the
switch for more than 3 seconds while the
vehicle is stopped.
The VSC OFF indicator light will come on
and the “Traction Control Turned OFF” will
be shown on the multi-information display.
*
Press the switch again to turn the sys-
tems back on.
*
: PCS (Pre-Collision System) will also be
disabled (only Pre-Collision warning is
available). The PCS warning light will
come on and a message will be displayed
on the multi-information display.
(P.246)
■ When the message is displayed on the
multi-information display showing that
TRC has been disabled even if the
switch has not been pressed
TRC is temporary deactivated. If the infor-
mation continues to show, contact any
authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
386
4-5. Using the driving support systems
■ Operating conditions of hill-start assist
control
When all of the following conditions are
met, the hill-start assist control will operate:
● The shift lever is in a position other than P
or N (when starting off forward/back-
ward on an upward incline)
● The vehicle is stopped
● The accelerator pedal is not depressed
● The parking brake is not engaged
● The power switch is in ON
■ Automatic system cancelation of hill-
start assist control
The hill-start assist control will turn off in any
of the following situations:
● The shift lever is shifted to P or N
● The accelerator pedal is depressed
● The brake pedal is depressed and the
parking brake is engaged
● A maximum of 2 seconds have elapsed
after the brake pedal is released
● The power switch is turned to OFF.
■ Sounds and vibrations caused by the
ABS, brake assist, VSC, TRC, Trailer
Sway Control (vehicles with towing
package) and hill-start assist control
systems
● A sound may be heard from the engine
compartment when the brake pedal is
depressed repeatedly, when the hybrid
system is started or just after the vehicle
begins to move. This sound does not indi-
cate that a malfunction has occurred in
any of these systems.
● Any of the following conditions may
occur when the above systems are oper-
ating. None of these indicates that a mal-
function has occurred.
• Vibrations may be felt through the vehi-
cle body and steering.
• A motor sound may be heard also after
the vehicle comes to a stop.
■ ECB operating sound
ECB operating sound may be heard in the
following cases, but it does not indicate that
a malfunction has occurred.
● Operating sound heard from the engine
compartment when the brake pedal is
operated.
● Motor sound of the brake system heard
from the front part of the vehicle when
the driver’s door is opened.
● Operating sound heard from the engine
compartment when one or two minutes
passed after the stop of the hybrid sys-
tem.
■ Active Cornering Assist operation
sounds and vibrations
When Active Cornering Assist is operated,
operation sounds and vibrations may be
generated from the brake system, but this is
not a malfunction.
■ Automatic reactivation of TRC, Trailer
Sway Control (vehicles with towing
package) and VSC systems
After turning the TRC, Trailer Sway Con-
trol and VSC systems off, the systems will
be automatically re-enabled in the following
situations:
● When the power switch is turned off
● If only the TRC system is turned off, the
TRC will turn on when vehicle speed
increases. If both the TRC and VSC sys-
tems are turned off, automatic re-
enabling will not occur when vehicle
speed increases.
■ Operating conditions of Active Corner-
ing Assist
The system operates when the following
occurs.
● TRC/VSC can operate
● The driver is attempting to accelerate
while turning
● The system detects that the vehicle is
drifting to the outer side
● The brake pedal is released
■ Reduced effectiveness of the EPS sys-
tem
The effectiveness of the EPS system is
reduced to prevent the system from over-
387
4
4-5. Using the driving support systems
Driving
heating when there is frequent steering
input over an extended period of time. The
steering wheel may feel heavy as a result.
Should this occur, refrain from excessive
steering input or stop the vehicle and turn
the hybrid system off. The EPS system
should return to normal within 10 minutes.
■ Operating conditions of emergency
brake signal
When the following conditions are met, the
emergency brake signal will operate:
● The emergency flashers are off
● Actual vehicle speed is over 55 km/h
(35 mph)
● The system judges from the vehicle
deceleration that it is a sudden braking
operation
■ Automatic system cancelation of emer-
gency brake signal
The emergency brake signal will be can-
celed in any of the following situations:
● The emergency flashers are turned on
● The system judges from the vehicle
deceleration that is not a sudden braking
operation
■ Secondary Collision Brake operating
conditions
The system operates when the SRS airbag
sensor detects a collision while the vehicle
is in motion. However, the system does not
operate when the components are dam-
aged.
■ Secondary Collision Brake automatic
cancellation
The system is automatically canceled in any
of the following situations.
● The vehicle speed drops to approxi-
mately 0 km/h (0 mph).
● A certain amount of time elapses during
operation
● The accelerator pedal is depressed a
large amount
■ If a message about AWD is shown on
the multi-information display (AWD
models)
Perform the following actions.
● “AWD System Over-heated Switching
to 2WD Mode”
AWD system is overheated. Stop the vehi-
cle in a safe place with the hybrid system
operating.
*
If the message disappears after a while,
there is no problem. If the message remains,
have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately.
● “AWD System Over-heated 2WD
Mode Engaged”
AWD system has been temporarily
released and switched to front-wheel drive
due to overheating. Stop the vehicle in a
safe place with the hybrid system operat-
ing.
*
If the message disappears after a while,
AWD system will automatically recover. If
the message remains, have the vehicle
inspected by any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer immediately.
● “AWD System Malfunction 2WD Mode
Engaged Visit Your Dealer”
A malfunction occurs in the AWD system.
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately.
*
: When stopping the vehicle, do not stop
the hybrid system until the display mes-
sage has turned off.
388
4-5. Using the driving support systems
WARNING
■ The ABS does not operate effectively
when
● The limits of tire gripping performance
have been exceeded (such as exces-
sively worn tires on a snow covered
road).
● The vehicle hydroplanes while driving
at high speed on wet or slick roads.
■ Stopping distance when the ABS is
operating may exceed that of normal
conditions
The ABS is not designed to shorten the
vehicle’s stopping distance. Always
maintain a safe distance from the vehicle
in front of you, especially in the following
situations:
● When driving on dirt, gravel or snow-
covered roads
● When driving with tire chains
● When driving over bumps in the road
● When driving over roads with pot-
holes or uneven surfaces
■ TRC/VSC may not operate effec-
tively when
Directional control and power may not
be achievable while driving on slippery
road surfaces, even if the TRC/VSC sys-
tem is operating.
Drive the vehicle carefully in conditions
where stability and power may be lost.
■ Active Cornering Assist does not
operate effectively when
● Do not overly rely on Active Corner-
ing Assist. Active Cornering Assist
may not operate effectively when
accelerating down slopes or driving on
slippery road surfaces.
● When Active Cornering Assist fre-
quently operates, Active Cornering
Assist may temporarily stop operating
to ensure proper operation of the
brakes, TRC, VSC.
■ Hill-start assist control does not oper-
ate effectively when
● Do not overly rely on hill-start assist
control. Hill-start assist control may
not operate effectively on steep
inclines and roads covered with ice.
● Unlike the parking brake, hill-start
assist control is not intended to hold
the vehicle stationary for an extended
period of time. Do not attempt to use
hill-start assist control to hold the vehi-
cle on an incline, as doing so may lead
to an accident.
■ When the TRC/VSC/ABS/Trailer
Sway Control (vehicles with towing
package) is activated
The slip indicator light flashes. Always
drive carefully. Reckless driving may
cause an accident. Exercise particular
care when the indicator light flashes.
■ When the TRC/VSC/Trailer Sway
Control (vehicles with towing pack-
age) systems are turned off
Be especially careful and drive at a
speed appropriate to the road condi-
tions. As these are the systems to help
ensure vehicle stability and driving force,
do not turn the TRC/VSC/Trailer Sway
Control systems off unless necessary.
Trailer Sway Control is part of the VSC
system and will not operate if VSC is
turned off or experiences a malfunction.
389
4
4-5. Using the driving support systems
Driving
WARNING
■ Replacing tires
Make sure that all tires are of the speci-
fied size, brand, tread pattern and total
load capacity. In addition, make sure that
the tires are inflated to the recom-
mended tire inflation pressure level.
The ABS, TRC, Trailer Sway Control
(vehicles with towing package) and VSC
systems will not function correctly if dif-
ferent tires are installed on the vehicle.
Contact any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer for further information
when replacing tires or wheels.
■ Handling of tires and the suspension
Using tires with any kind of problem or
modifying the suspension will affect the
driving assist systems, and may cause a
system to malfunction.
■ Trailer Sway Control precaution
(vehicles with towing package)
The Trailer Sway Control system is not
able to reduce trailer sway in all situa-
tions. Depending on many factors such
as the conditions of the vehicle, trailer,
road surface and driving environment,
the Trailer Sway Control system may not
be effective. Refer to your trailer owner’s
manual for information on how to tow
your trailer properly.
■ If trailer sway occurs (vehicles with
towing package)
Observe the following precautions. Fail-
ing to do so may cause death or serious
injury.
● Firmly grip the steering wheel. Steer
straight ahead. Do not try to control
trailer swaying by turning the steering
wheel.
● Begin releasing the accelerator pedal
immediately but very gradually to
reduce speed. Do not increase speed.
Do not apply vehicle brakes.
If you make no extreme correction with
the steering or brakes, your vehicle and
trailer should stabilize. (P.184)
■ Secondary Collision Brake
Do not rely solely upon the Secondary
Collision Brake. This system is designed
to help reduce the possibility of further
damage due to a secondary collision,
however, that effect changes according
to various conditions. Overly relying on
the system may result in death or serious
injury.

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals