301
4
4-5. Using the driving support systems
Driving
2 Decrease set vehicle speed
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
Short press adjustment: By 1 km/h (0.6
mph) or 1 mph (1.6 km/h) each time the
switch is pressed
Long press adjustment: Increases or
decreases in 5 km/h (3.1 mph) or 5 mph (8
km/h) increments continuously while the
switch is pressed and held
The set vehicle speed adjustment incre-
ment can be changed through a customize
setting.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Vehicles without a head-up display
Vehicles with a head-up display
2 Press the “RES” switch to resume
control.
When control is canceled, the speed lim-
iter indicator will change from illuminated
in green to white.
■ Exceeding the set speed
In the following situations, if the vehicle
speed exceeds the set vehicle speed, the
displayed set vehicle speed will flash:
● When the accelerator pedal is deeply
depressed
● When driving down a slope
■ Automatic cancellation of the speed
limiter
● Situations in which some or all of the
functions of the system cannot operate:
P.239
■ Changes in brake operation sound and
pedal response
P.239
When RSA function is enabled and the
speed limiter is operating, if a speed
limit sign is detected, the detected
speed limit will be displayed with an
up/down arrow. The set vehicle speed
can be increased/reduced to the
detected speed limit by pressing and
holding the “+” or “-” switch.
Speed limiter with Road Sign
Assist