2024-2026 Lexus LBX SUV Driving -> Transmission User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Transmission for Your Lexus LBX SUV First Generation (2024-2026)

197
4
4-2. Driving procedures
Driving
Vehicles without paddle shift
switches
*
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving.
Vehicles with paddle shift switches
*1
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving. You can choose gear range
suitable for your driving situation by
operating the paddle shift switches.
*2
: By selecting shift ranges using S mode,
you can control accelerating force and
engine braking force.
■ When driving with dynamic radar cruise
control activated (vehicles with paddle
shift switches)
Even when performing the downshifting to
5 or 4 with the intent of enabling engine
braking while driving in D or S mode,
engine braking will not activate because
dynamic radar cruise control with full-
speed range will not be canceled.
(P.202)
■ If a message about a shift operation is
shown
To prevent the shift position from being
selected incorrectly or the vehicle from
moving unexpectedly, the shift position may
be changed automatically or operating the
shift lever may be required. In this case,
change the shift position following the mes-
sages on the multi-information display.
■ Restraining sudden start (Drive-Start
Control)
P.182
Transmission
Select the shift position depending
on your purpose and situation.
Shift position purpose and func-
tions
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*
B
Applying engine braking or
strong braking when the
accelerator pedal has been
released on steep downward
slopes etc.
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*1
S
S mode driving
*2
(P.203)
Shift posi-
tion
Objective or function
198
4-2. Driving procedures
Vehicles without paddle shift
switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to B is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, B or R to P, from D or B to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
P position switch
Fully stop the vehicle and set the parking
WARNING
■ When driving on slippery road sur-
faces
Do not accelerate or shift the shift posi-
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
■ Hybrid battery (traction battery)
charge
If the shift position is in N, the hybrid bat-
tery (traction battery) will not be
charged. To help prevent the battery
from discharging, avoid leaving the N
position selected for a certain amount of
time.
■ Situations where shift control system
malfunctions are possible
If any of the following situations occurs,
shift control system malfunctions are
possible.
Immediately stop the vehicle in a safe
place on level ground, apply the parking
brake, and then contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● When the warning message indicating
the shift control system appears on the
multi-information display. (P.499)
● The display indicates that no shift posi-
tion is selected for more than a few
seconds.
Shift position display and how to
change the shift position
A
B
199
4
4-2. Driving procedures
Driving
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
Vehicles with paddle shift switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to S is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, S or R to P, from D or S to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
P position switch
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
■ Changing the shift position in each
power switch mode
● The shift position cannot be changed
when the power switch is in ACC or off.
● When the power switch is in ON, if the
READY indicator is not illuminated, the
shift position can only be changed to N.
● When the READY indicator is illumi-
nated, the shift position can be changed
from P to D, N, or R.
● When the READY indicator is flashing,
the shift position cannot be changed from
P to any other position, even if the shift
lever is operated. Operate the shift lever
again after the READY indicator
C
A
B
C
200
4-2. Driving procedures
changes from flashing to illuminated.
■ Shifting the shift position from P to other
positions
● While depressing the brake pedal firmly,
operate the shift lever. If the shift lever is
operated without depressing the brake
pedal, the buzzer will sound and the shift-
ing operation will be disabled.
● When selecting the shift position, make
sure that the shift position has been
changed to the desired position by
checking the shift position indicator pro-
vided on the instrument cluster.
● The shift position cannot be changed
from P to B
*1
or S
*2
directly.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position cannot be changed
when
In the following situations, a buzzer will
sound to inform you that the shift position
cannot be changed. Use the appropriate
operation to attempt to change the shift
position again.
● When attempting to change the shift
position from P with the brake pedal not
depressed
● When attempting to change the shift
position from P with the accelerator
pedal depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the brake
pedal not depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the accel-
erator pedal depressed
● When attempting to change the shift
position from P or N to B
*1
or S
*2
● When the P position switch is pressed
while driving
When driving at an extremely low speed,
the shift position may change to P.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position automatically changes
to N when
In the following situations, a buzzer will
sound to inform you that the shift position
has been changed to N. Use the appropri-
ate operation to attempt to change the shift
position again.
● When attempting to change the shift
position to R while the vehicle is moving
forward
When driving at a low speed, the shift posi-
tion may change to R.
● When attempting to change the shift
position to D while the vehicle is moving
backward
When driving at a low speed, the shift posi-
tion may change to D.
● When attempting to change the shift
position from R to B
*1
or S
*2
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ If the N shift position is selected while
driving
If the shift lever is moved to N while driving
above a certain speed, the shift position will
change to N without holding the shift lever
in the N position. In this situation, a buzzer
will sound and a message will be displayed
on the multi-information display to inform
you that the shift position has been changed
to N.
■ Automatic P position selection function
In the following situations, the shift position
is automatically changed to P.
● When pressing the power switch with the
vehicle stopped while the power switch is
in ON and the shift position is in a posi-
tion other than P (after the shift position
has changed to P, the power switch will
turn off)
*
● If the driver’s door is opened and all of the
following conditions are met, while the
shift position is in a position other than P
201
4
4-2. Driving procedures
Driving
• The power switch is in ON.
• The driver is not wearing the seat belt.
• The brake pedal is not depressed.
To start off the vehicle after the shift position
is changed to P, operate the shift lever
again.
● When the vehicle is stopped after the
hybrid system has been stopped in an
emergency while driving.
● When voltage of the 12-volt battery
drops while the shift position is in a posi-
tion other than P.
*
: When the power switch is pressed while
driving at extremely slow speeds, such as
immediately before stopping the vehicle,
the shift position may automatically
change to P. Make sure that the vehicle is
completely stopped before pressing the
power switch.
■ If the shift position cannot be shifted
from P
There is a possibility that the 12-volt battery
is discharged. Check the 12-volt battery in
this situation. (P.533)
■ Customization
Some functions can be customized.
(P.556)
By performing the following opera-
tion, the shift position can be held in
N until the shift position switches to
P without activating the automatic P
position selection function.
1 Operate the shift lever and change
the shift position to N when the
hybrid system is operating.
2 Return the shift lever to its regular
position ( ).
3 Operate the shift lever to N and
hold it there until the buzzer
sounds.
WARNING
■ For the shift lever
● Do not remove the shift lever knob or
use anything but a genuine Lexus shift
lever knob. Also, do not hang anything
on the shift lever. Doing so could pre-
vent the shift lever from returning to
position, causing unexpected acci-
dents to occur when the vehicle is in
motion.
● In order to prevent the shift position
from accidentally being changed, do
not touch the shift lever when not using
them.
■ P position switch
● Do not press the P position switch
while the vehicle is moving.
If the P position switch is pressed when
driving at very low speeds (for example,
directly before stopping the vehicle), the
vehicle may stop suddenly when the shift
position switches to P, which could lead
to an accident.
● In order to prevent the shift position
from accidentally being changed, do
not touch the P position switch when
not using them.
NOTICE
■ When exiting the vehicle (driver’s
seat only)
Check that the shift position indicator
shows P and that the parking brake indi-
cator is illuminated before opening the
door and exiting the vehicle.
Keeping the shift position in N
without activating the automatic
P position selection function
202
4-2. Driving procedures
4 Press the power switch within 5
seconds after the buzzer sounds.
The hybrid system stops with the shift posi-
tion in N.
*
Make sure to check that the buzzer sounds
and “Holding N Push P Switch When
Done” is displayed on the multi-informa-
tion display.
In order to shift to a position other
than N, first press the P position
switch to change the shift position to
P.
If the automatic P position switching
operation selection function is per-
formed operated with the hybrid
system stopped, the automatic P
position selection function may not
operate.
Always perform the operation with
the hybrid system started.
Make sure to operate the shift lever
with the hybrid system is operating.
If the hybrid system is not operating,
it may not be possible to hold the
shift position in N.
*
: To keep this state, do not operate the
power switch. If the power switch is
operated repeatedly, the power switch
will turn off after the shift position has
automatically changed to P.
Use Eco drive mode to help achieve
low fuel consumption during trips that
involve frequent accelerating and
braking.
Press the “ECO MODE” switch to
select Eco drive mode.
The “ECO” indicator will come on.
Press the switch again to cancel Eco
drive mode.
The Eco drive mode will remain on or
off even if the power switch is turned
off.
■ Operation of the air conditioning sys-
tem in Eco drive mode
Eco drive mode controls the heating/cool-
ing operations and fan speed of the air con-
ditioning system to enhance fuel efficiency
(P.403). To improve air conditioning
performance, adjust the fan speed or turn
off Eco drive mode.
To drive using temporary shift range
selection, operate the “-” paddle shift
switch.
Changing the shift range enables the
level of engine braking force to be
selected.
The shift range can then be selected by
operating the “-” and “+” paddle shift
switches.
Selecting the Eco drive mode
Selecting shift ranges in the D
position (vehicles with paddle
shift switches)
203
4
4-2. Driving procedures
Driving
1 Upshifting
2 Downshifting
The selected shift range, from D1 to D6,
will be displayed on the multi-information
display.
To return to normal D position driving,
hold the “+” puddle shift switch for a period
of time.
■ Shift ranges and their functions
You can choose from 5 levels of
engine braking force.
A lower shift range will provide
greater engine braking force than a
higher shift range, and the engine
revolutions will also increase.
■ When the “-” paddle shift switch is oper-
ated in the D position
The shift range is downshifted to a range
that enables engine braking force that is
suitable to driving conditions.
■ Automatic deactivation of shift range
selection in the D position
Shift range selection in the D position will
be deactivated in the following situations:
● When the vehicle comes to a stop
● If the accelerator pedal is depressed for
more than a certain period of time
● When the shift position is shifted to a
position other than D
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the paddle shift switch is operated. (A
buzzer will sound twice.)
To enter S mode, shift the shift position
to S. Shift ranges can be selected by
operating the paddle shift switches,
allowing you to drive in the shift range
of your choosing. The shift range can
then be selected by operating the “-”
and “+” paddle shift switches.
1 Upshifting
2 Downshifting
The selected shift range, from S1 to S6, will
be displayed on the meter.
The initial shift range in S mode is automat-
ically set to S4.
■ Shift ranges and their functions
You can choose from 6 levels of
accelerating force and engine brak-
ing force.
A lower shift range will provide
Selecting shift ranges in the S
mode (vehicles with paddle shift
switches)
204
4-2. Driving procedures
greater accelerating force and
engine braking force than a higher
shift range, and the engine revolu-
tions will also increase.
■ S mode
● To prevent the engine from over-revving,
upshifting may automatically occur.
● When in S4 or lower, if the paddle shift
switch is held toward “+” the shift range
will be set to S6.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the paddle shift switch is operated. (A
buzzer will sound twice.)
The turn signal lever can be used to
show the following intentions of the
driver.
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The power switch is in ON.
■ If the indicator flashes faster than usual
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Turn signal lever
Operating instructions

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals