330
4-5. Using the driving support systems
Example:
■ The RCTA function is operational when
The RCTA function operates when all of the
following conditions are met:
● The power switch is in ON.
● The RCTA function is on.
● The shift position is in R.
● The vehicle speed is less than approxi-
mately 15 km/h (9 mph).
● The approaching vehicle speed is
between approximately 8 km/h (5 mph)
and 56 km/h (34 mph).
■ Setting the buzzer volume
The buzzer volume of the RCTA, Lexus
parking assist-sensor and RCD (if
equipped) can be adjusted all together
through a customize setting. (P.556)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the Center Dis-
play.
Select the switch to mute the buzzer of the
Lexus parking assist-sensor, RCTA and
RCD (if equipped) all together.
Mute will be canceled automatically in the
following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a cer-
tain speed.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When the operating function is disabled
manually.
● When the power switch is turned off.
■ Conditions under which the system will
not detect a vehicle
The RCTA function is not designed to
detect the following types of vehicles
and/or objects:
● Vehicles approaching from directly
behind
● Vehicles backing up in a parking space
next to your vehicle
● Vehicles that the sensors cannot detect
due to obstructions
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles moving away from your vehicle
● Vehicles approaching from the parking
spaces next to your vehicle
*
● The distance between the sensor and
approaching vehicle gets too close
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the system may not
operate properly
The RCTA function may not detect vehicles
correctly in the following situations:
● When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
● When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
● When driving on a wet road surface, such
as in a puddle, while in inclement
weather, such as heavy rain, snow, fog,
etc.
Approaching vehi-
cle speed
Approximate
alert distance
56 km/h (34 mph)
(fast)
30 m (98 ft.)
8 km/h (5 mph)
(slow)
4 m (13 ft.)