2024-2026 Lexus LBX SUV Driving -> Brake Hold User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Brake Hold for Your Lexus LBX SUV First Generation (2024-2026)

208
4-2. Driving procedures
Turns the brake hold system on
The brake hold standby indicator
(green) comes on. While the system is
holding the brake, the brake hold operated
indicator (yellow) comes on.
■ Brake hold system operating conditions
The brake hold system cannot be turned on
in the following conditions:
● The driver’s door is not closed.
● The driver is not wearing the seat belt.
NOTICE
■ When parking the vehicle
Before you leave the vehicle, shift the
shift position to P, set the parking brake
and make sure that the vehicle does not
move.
■ When the system malfunctions
Stop the vehicle in a safe place and
check the warning messages.
■ When the vehicle 12-volt battery is
discharged
The parking brake system cannot be
activated. (P.533)
■ When the parking brake cannot be
released due to a malfunction
Driving the vehicle with the parking
brake set will lead to brake components
overheating, which may affect braking
performance and increase brake wear.
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately if this occurs.
Brake Hold
The brake hold system keeps the
brake applied when the shift posi-
tion is in D, B
*1
, S
*2
, N or P with the
system on and the brake pedal has
been depressed to stop the vehicle.
The system releases the brake
when the accelerator pedal is
depressed with the shift position in
D, B
*1
or S
*2
to allow smooth start
off.
*1
: Vehicles without paddle shift
switches
*2
: Vehicles with paddle shift switches
Enabling the system
A
B
209
4
4-2. Driving procedures
Driving
● “Parking Brake Unavailable” or “Parking
Brake Malfunction Visit Your Dealer” is
displayed on the multi-information dis-
play.
If any of the conditions above are detected
when the brake hold system is enabled, the
system will turn off and the brake hold
standby indicator light will go off. In addi-
tion, if any of the conditions are detected
while the system is holding the brake, a
warning buzzer will sound and a message
will be shown on the multi-information dis-
play. The parking brake will then be set
automatically.
■ Brake hold function
● If the brake pedal is left released for a
period of about 3 minutes after the sys-
tem has started holding the brake, the
parking brake will be set automatically. In
this case, a warning buzzer sounds and a
message is shown on the multi-informa-
tion display.
● To turn the system off while the system is
holding the brake, firmly depress the
brake pedal and press the button again.
● The brake hold function may not hold the
vehicle when the vehicle is on a steep
incline. In this situation, it may be neces-
sary for the driver to apply the brakes. A
warning buzzer will sound and the multi-
information display will inform the driver
of this situation. If a warning message is
shown on the multi-information display,
read the message and follow the instruc-
tions.
● When do not wish for the parking brake
to operate automatically, press and hold
the brake hold switch until the standby
indicator (green) turns off, and then turn
the power switch off.
■ When the parking brake is set automati-
cally while the system is holding the
brakes
Perform any of the following operations to
release the parking brake.
● Depress the accelerator pedal. (The
parking brake will not be released auto-
matically if the seat belt is not fastened.)
● Operate the parking brake switch with
the brake pedal depressed.
Make sure that the parking brake indicator
light goes off. (P.205)
■ When an inspection at any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer is nec-
essary
When the brake hold standby indicator
(green) does not illuminate even when the
brake hold switch is pressed with the brake
hold system operating conditions met, the
system may be malfunctioning. Have the
vehicle inspected at any authorized Lexus
retailer or Lexus authorized repairer, or any
reliable repairer.
■ If “Brake Hold Malfunction Visit Your
Dealer” is displayed on the multi-infor-
mation display
The system may be malfunctioning. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
■ Warning messages and buzzers
Warning messages and buzzers are used to
indicate a system malfunction or to inform
the driver of the need for caution. If a warn-
ing message is shown on the multi-informa-
tion display, read the message and follow
the instructions.
■ If the brake hold operated indicator
flashes
P.497
WARNING
■ When the vehicle is on a steep incline
Take care when using the brake hold sys-
tem on a steep incline, exercise caution.
The brake hold function may not hold
brakes in such situations. Also, the sys-
tem may not activate depending on the
angle of the slope.
210
4-2. Driving procedures
WARNING
■ When stopped on a slippery road
The system cannot stop the vehicle when
the gripping ability of the tires has been
exceeded. Do not use the system when
stopped on a slippery road.
NOTICE
■ When parking the vehicle
The brake hold system is not designed
for use when parking the vehicle for a
long period of time. Turning the power
switch off while the system is holding the
brake may release the brake, which
would cause the vehicle to move. When
operating the power switch, depress the
brake pedal, shift the shift position to P
and set the parking brake.

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals