2024-2026 Lexus LBX SUV Driving -> Lexus parking assist-sensor User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Lexus parking assist-sensor for Your Lexus LBX SUV First Generation (2024-2026)

319
4
4-5. Using the driving support systems
Driving
a curve
● Instances of the safe exit assist unneces-
sarily detecting a vehicle and/or object
may increase in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When a vehicle or bicycle approaches
your vehicle from directly behind in an
offset position
• When the vehicle is stopped at an angle
to the road
• When a vehicle or bicycle approaches
from behind a parked vehicle at an angle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
cent lane
*
: If equipped
■ Type of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
Front side sensors (vehicles with
Advanced Park)
Rear side sensors (vehicles with
Advanced Park)
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
Lexus parking assist-sensor
*
The Lexus parking assist-sensor
function detects the approximate
distance from the vehicle and an
object such as a wall using ultra-
sonic sensors and informs the
driver with the Center Display dis-
tance display and buzzer.
System components
A
B
C
D
E
F
320
4-5. Using the driving support systems
The illustration is an example for expla-
nation and may differ depending on the
specifications.
Center Display
■ Lexus parking assist-sensor detec-
tion indicator
*
When the sensors detect an object,
Lexus parking assist-sensor detection
indicator illuminates.
*
: If equipped
■ How to check the presence of Lexus
parking assist-sensor detection indica-
tor
On vehicles with the Lexus parking assist-
sensor detection indicator, the Lexus park-
ing assist-sensor OFF indicator (P.320)
will turn off when the shift position is
changed to R while the Lexus parking
assist-sensor is disabled.
The Lexus parking assist-sensor func-
tion can be enabled/disabled through
a customize setting. (P.556)
When the Lexus parking assist-sensor
function is disabled, the Lexus parking
assist-sensor OFF indicator (P.95)
illuminates on the multi-information
display.
If the system switches to OFF (dis-
abled) and the Lexus parking assist-
sensor is stopped, the Lexus parking
assist-sensor will not be re-enabled
until ON (enabled) is selected again
from the customize setting (P.556).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
Vehicles with the Lexus parking assist-
sensor detection indicator: The system
will automatically turn on (enabled)
and the Lexus parking assist-sensor
OFF indicator will turn off if the shift
position is changed to R.
When the shift position is R, the Lexus
parking assist-sensor cannot be turned
on or off.
The setting of Lexus parking assist-
sensor itself will not change.
Turning the Lexus parking assist-
sensor function ON/OFF
WARNING
■ Cautions regarding the use of the
system
There is a limit to the degree of recogni-
tion accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
always responsible for paying attention
to the vehicle’s surroundings and driving
safely.
■ To ensure the system can operate
properly
Make sure to observe the following pre-
cautions. The system may not operate
properly and may lead to an unexpected
accident. When these precautions can-
not be observed, turn the system off.
● Do not damage the sensors, and
always keep them clean.
321
4
4-5. Using the driving support systems
Driving
■ The system can be operated when
● The power switch is in ON.
● The Lexus parking assist-sensor is on.
● The vehicle speed is less than about 10
km/h (6 mph).
● Front corner sensors:
• The shift position is in a position other
than P.
● Front center sensors:
• The shift position is in a position other
than P or R.
● Rear corner and rear center sensors:
• The shift position is in R.
● Side sensors: (vehicles with Advanced
Park)
• The vehicle is moving about 7 m (23.0 ft.)
after the hybrid system was started.
• The vehicle is moving about 7 m (23.0 ft.)
after the shift position was changed from
R to D.
• The shift position is in R.
• switch has been pressed and the
Center Display is displayed.
• The front or rear sensor detects a station-
ary object.
Vehicles with the Lexus parking assist-sen-
sor detection indicator: Even when the
Lexus parking assist-sensor is turned off
(disabled), if the shift position is changed to
R, the system will automatically turn on
(enabled) and the Lexus parking assist-sen-
sor OFF indicator will turn off.
The setting of the Lexus parking assist-sen-
sor itself will not change.
■ Sensor detection information
● The sensor’s detection areas are limited
to the areas around the vehicle’s front
and rear bumpers.
● Certain vehicle conditions and the sur-
rounding environment may affect the
ability of a sensor to correctly detect an
object.
● Objects may not be detected if they are
too close to the sensor.
● There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
object will come within the sensor’s
detection areas before the display is
shown and the warning beep sounds.
● It might be difficult to hear the buzzer due
to the volume of the audio system or air
flow noise of the air conditioning system.
● It may be difficult to hear the sound of this
system due to the buzzers of other sys-
tems.
WARNING
● Do not attach a sticker or install a com-
ponent, such as a backlit license plate
(especially fluorescent type), fog lights,
fender pole or wireless antenna near a
radar sensor.
● Do not subject the surrounding area of
the sensor to a strong impact. If sub-
jected to an impact, have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer,
or any reliable repairer. If the front or
rear bumper needs to be
removed/installed or replaced, con-
tact any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer.
● Do not modify, disassemble or paint
the sensors.
● Do not attach a license plate cover.
● Keep your tires properly inflated.
● Do not install a suspension other than
a genuine suspension.
■ Notes when washing the vehicle
● When using a high pressure washer to
wash the vehicle, do not spray the sen-
sors directly, as doing so may cause a
sensor to malfunction.
● When using steam to clean the vehi-
cle, do not direct steam too close to
the sensors, as doing so may cause a
sensor to malfunction.
322
4-5. Using the driving support systems
● If the meter malfunctions, the buzzer may
not sound.
■ Objects which the system may not be
properly detected
The shape of the object may prevent the
sensor from detecting it. Pay particular
attention to the following objects:
● Wires, fences, ropes, etc.
● Cotton, snow and other materials that
absorb sound waves
● Sharply-angled objects
● Low objects
● Tall objects with upper sections project-
ing outwards in the direction of your vehi-
cle
People may not be detected if they are
wearing certain types of clothing.
■ Situations in which the system may not
operate properly
Certain vehicle conditions and the sur-
rounding environment may affect the ability
of a sensor to correctly detect objects. Par-
ticular instances where this may occur are
listed below.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is frozen. (Thawing the area will
resolve this problem.) In especially cold
weather, if a sensor is frozen the sensor
display may be displayed abnormally, or
objects, such as a wall, may not be
detected.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● A sensor is coated with a sheet of spray
or heavy rain.
● If objects draw too close to the sensor.
● When a pedestrian is wearing clothing
that does not reflect ultrasonic waves (ex.
skirts with gathers or frills).
● When objects that are not perpendicular
to the ground, not perpendicular to the
vehicle traveling direction, uneven, or
waving are in the detection range.
● When strong winds are blowing.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When an object that cannot be detected
is between the vehicle and a detected
object.
● If an object such as a vehicle, motorcycle,
bicycle or pedestrian cuts in front of the
vehicle or runs out from the side of the
vehicle.
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● When equipment such as a towing eye-
let, transport hook, bumper protector,
bumper trim, bicycle carrier or snow-
removal device (snow plow) is installed
near the sensor.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle.
■ Situations in which the system may
operate even if there is no possibility of a
collision
In some situations, such as the following, the
323
4
4-5. Using the driving support systems
Driving
system may operate even though there is
no possibility of a collision.
● When driving on a narrow road.
● When driving toward a banner, flag, low-
hanging branch or boom barrier (such as
those used at railroad crossings, toll
gates and parking lots).
● When there is a rut or hole in the surface
of the road.
● When driving on a metal cover (grating),
such as those used for drainage ditches.
● When driving up or down a steep slope.
● If a sensor is hit by a large amount of
water, such as when driving on a flooded
road.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is coated with a sheet of spray
or heavy rain.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When strong winds are blowing.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● The vehicle is approaching a tall or
curved curb.
● Driving close to columns (H-shaped steel
beams, etc.) in multi-story parking
garages, construction sites, etc.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle.
324
4-5. Using the driving support systems
■ Detection range of the sensors
Vehicles without Advanced Park
Approximately 100 cm (3.3 ft.)
Approximately 150 cm (4.9 ft.)
Approximately 60 cm (2.0 ft.)
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
Vehicles with Advanced Park
Approximately 200 cm (6.6 ft.)
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
■ The distance and buzzer
Vehicles without Advanced Park
Sensor detection display, object
distance
A
B
C
A
Approximate distance to object Buzzer
Front center sensor:
Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.)
*
Rear center sensor:
Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.)
*
Slow
Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.)
*
Medium
Approximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.)
*
Fast
Approximately less than 30 cm (1.0 ft.) Continuous
325
4
4-5. Using the driving support systems
Driving
*
: Automatic buzzer mute function is enabled. (P.326)
Vehicles with Advanced Park
*
: Automatic buzzer mute function is enabled. (P.326)
A buzzer sounds when the sensors are
operating.
The buzzer beeps faster as the vehi-
cle approaches a static object.
When the vehicle comes within the
approximately 30 cm (1.0 ft.) of the
object, the buzzer will sound contin-
uously.
When 2 or more sensors simultane-
ously detect a static object, the
buzzer sounds for the nearest
object.
After an intermittent buzzer begins
sounding, if the distance between
the vehicle and the detected static
object does not become shorter, the
buzzer will be muted automatically.
(automatic buzzer mute function)
■ Adjusting the buzzer volume
The buzzer volume of the Lexus parking
assist-sensor, RCTA (if equipped) and
RCD (if equipped) can all be changed at
once from the customize settings.
Approximate distance to object Buzzer
Front center sensor:
Approximately 200 cm (6.6 ft.) to 100 cm (3.3 ft.)
Rear center sensor:
Approximately 200 cm (6.6 ft.) to 150 cm (4.9 ft.)
Corner sensor:
Approximately 200 cm (6.6 ft.) to 60 cm (2.0 ft.)
Does not sound (Display only)
Front center sensor:
Approximately 100 cm (3.3 ft.) to 60 cm (2.0 ft.)
*
Rear center sensor:
Approximately 150 cm (4.9 ft.) to 60 cm (2.0 ft.)
*
Slow
Front/Rear center sensor and Corner sensor:
Approximately 60 cm (2.0 ft.) to 45 cm (1.5 ft.)
*
Medium
Front/Rear center sensor and Corner sensor:
Approximately 45 cm (1.5 ft.) to 30 cm (1.0 ft.)
*
Fast
Approximately less than 30 cm (1.0 ft.) Continuous
Lexus parking assist-sensor
buzzer
326
4-5. Using the driving support systems
(P.556)
■ Muting a buzzer
When the temporary mute switch is dis-
played on the Center Display, this switch
can be pressed to temporarily mute the
buzzer.
Select the switch to mute a buzzer of the
Lexus parking assist-sensor, RCTA (if
equipped) and RCD (if equipped) all
together.
● Mute will be automatically canceled in
the following situations:
• When the shift position is changed.
• When the vehicle speed exceeds a cer-
tain speed.
• When there is a malfunction in a sensor
or the system is temporarily unavailable.
• When the operating function is disabled
manually.
• When the power switch is turned off.
The object warning function informs
the driver of the existence of objects
along the side of the vehicle, using a
display and buzzer, if the objects are
within the estimated path of the vehi-
cle.
Object
Calculated vehicle route
When the vehicle is moving, the side sensors or side cameras can detect objects.
While the vehicle is moving, if a detected object can no longer be detected by the
side sensors or side cameras, the location of the object relative to the vehicle is
estimated. If the object is determined to be in the estimated path of the vehicle, the
object warning function will operate.
Object detected by side sensors or side cameras
1 The vehicle is stopped and objects along the sides of the vehicle are not
detected.
Lexus parking assist-sensor
object warning function (vehi-
cles with Advanced Park)
A
B
A
327
4
4-5. Using the driving support systems
Driving
2 Objects are detected as the vehicle is moving.
3 Even though the objects are outside of the detection area of the side sensors or
side cameras, a warning is displayed and a buzzer sounds.
■ Object warning function operating con-
ditions
● The vehicle moves about 7 m (23.0 ft.)
after the hybrid system is started.
● After the D shift position has been
selected, the vehicle has moved 7 m
(23.0 ft.) or less.
● The R shift position is selected.
● switch has been pressed and the
Center Display is displayed.
● The front or rear sensor detects a station-
ary object.
■ Detection of objects along the sides of
the vehicle
● Objects along the sides of the vehicle are
not instantaneously detected. The loca-
tion of objects in relation to the vehicle is
estimated after they are first detected by
the front or rear side sensors, or side
cameras. Therefore, after the power
switch is changed to ON, even if an
object is along the side of the vehicle, it
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
● If a vehicle, person, animal, etc., is
detected by a side sensors or side cam-
eras, but then leaves the detection area
of the side sensors or side cameras, the
system will assume the object has not
moved.
WARNING
■ Side sensors and side cameras
In situations such as the following, the
function may not operate correctly, pos-
sibly leading to an accident. Proceed
carefully.
● When starting off shortly after the
power switch is turned to ON and a
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off,
the vehicle on the left will not be
detected and the object warning func-
tion will not operate.
● When an object or person is in a posi-
tion which cannot be detected by the
side sensors or side cameras.
● When a vehicle, person, or other
object approaches the side of the vehi-
cle after the side sensors have com-
pleted scanning the areas along the
sides of the vehicle.
● When the outside rear view mirror is
folded.
● If the 12-volt battery was discharged or
has been removed and installed, fold
and extend the outside rear view mir-
rors.

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals