2024-2026 Lexus LBX SUV Driving -> Rear Vehicle Approaching Indication User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Rear Vehicle Approaching Indication for Your Lexus LBX SUV First Generation (2024-2026)

308
4-5. Using the driving support systems
*
: If equipped
Multi-information display/head-up
display (if equipped)
Notifies through message and buzzer
when your vehicle may obstruct the pass-
ing of the vehicle behind you.
Center Display
Turning the Rear Vehicle Approaching
Indication on/off.
The Rear Vehicle Approaching Indica-
tion can be enabled/disabled through
a customize setting. (P.556)
■ Buzzer
If the volume setting of the audio system is
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ Customization
Some functions can be customized.
(P.556)
On detecting a vehicle approaching
behind your vehicle using the rear side
Rear Vehicle Approaching
Indication
*
The rear vehicle approaching indi-
cation is a system that uses radar
sensors installed on the inner side
of the rear bumper. By notifying the
driver of a vehicle approaching
behind your vehicle, the system
assists the driver in judging whether
or not an evasive action should be
taken.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings.
The rear vehicle approaching indication
is a supplementary system that informs
the driver of the existence of a vehicle
approaching behind your vehicle.
As this system may not function to its full-
est extent in certain situations, the
driver’s own visual confirmation of safety
is necessary.
Over reliance on this function may lead
to an accident resulting death or serious
injury.
■ To ensure the system can operate
properly
P.303
System components
Turning the Rear Vehicle
Approaching Indication on/off
Rear Vehicle Approaching Indi-
cation operation
A
B
309
4
4-5. Using the driving support systems
Driving
radar sensors, the rear vehicle
approaching indication notifies the
driver of the existence of the vehicle
through a message on the multi-infor-
mation display or head-up display (if
equipped), and a buzzer.
■ Operating conditions of Rear Vehicle
Approaching Indication
When the following conditions are met, the
Rear Vehicle Approaching Indication will
operate:
● The power switch is in ON.
● The Rear Vehicle Approaching Indica-
tion is on.
● The shift position is in a position other
than R.
● The vehicle speed is approximately 100
km/h (63mph) or more.
● The turn signal lever is not being oper-
ated.
● The brake pedal is not depressed.
● Approximately 5 or more minutes have
elapsed since the system was operated.
■ The Rear Vehicle Approaching Indica-
tion will detect a vehicle when
The rear vehicle approaching indication
detects vehicles within the detection range
when a following vehicle driving in the same
lane is approaching.
■ Situations in which the Rear Vehicle
Approaching Indication cannot detect
vehicles
The Rear Vehicle Approaching Indication
cannot detect the following vehicles and
other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Vehicles traveling in the opposite direc-
tion
● A vehicle in an adjacent lane
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the Rear Vehicle
Approaching Indication may not oper-
ate properly
● In the following situations, the system may
not detect a following vehicle properly:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
on the rear bumper
• When driving on a wet road surface, such
as in a puddle, while in inclement
weather, such as heavy rain, snow, fog,
etc.
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When towing with the vehicle
• When the following vehicle is not
approaching from straight behind your
vehicle
• When the following vehicle is approach-
ing from an angle
• If a vehicle suddenly cuts behind your
vehicle
310
4-5. Using the driving support systems
• When your vehicle cuts in front of
another vehicle
• When the following vehicle is sur-
rounded by other vehicles
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When a following vehicle, which
approached your vehicle then moved
away, is approaching again
• When a following vehicle is moving away
from your vehicle
• When a following vehicle is overtaking
your vehicle
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When the height of a following vehicle is
too much different from that of your vehi-
cle
● Especially in situations such as the follow-
ing, the system may operate even if it is
unlikely for a following vehicle to
approach your vehicle:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When towing with the vehicle
• When your vehicle is surrounded by
other vehicles
• When making a left/right turn and a fol-
lowing vehicle passes immediately
behind your vehicle
• When a following vehicle closely
approaches your vehicle before overtak-
ing
• When a vehicle driving in an adjacent
lane is within the detection range, such as
when your vehicle is driving on a narrow
lane road or driving on the edge of a lane
• When there are more than one vehicle
around a following vehicle
• When passing through a location with a
structure above the road (traffic sign, bill-
board, etc.)
• When there is a static object, such as a
guardrail or wall, around a following vehi-
cle
• When there is an adjacent vehicle while
on a curve
• When your vehicle cuts in front of
another vehicle
*
: If equipped
The rear side radar sensors detect fol-
lowing vehicles driving in the same
lane. If the system determines that the
possibility of a rear-end collision is
Automatic Rear Flashing
Hazard Lights
*
The Automatic Rear Flashing Haz-
ard Lights is a system that uses the
rear side radar sensors located on
the inside of the rear bumper.
When the system determines that
the possibility of a rear-end colli-
sion is high, it flashes the emer-
gency flashers rapidly to warn the
driver of the following vehicle.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings. The Auto-
matic Rear Flashing Hazard Lights is an
auxiliary system that flashes the emer-
gency flashers rapidly to warn the driver
of the following vehicle when it deter-
mines that the possibility of a rear-end
collision is high. As this system may not
function to its fullest extent in certain situ-
ations, the driver’s own visual confirma-
tion of safety is necessary. Over reliance
on this function may lead to an accident
resulting death or serious injury.
■ To ensure the system can operate
properly
P.303
Automatic Rear Flashing Haz-
ard Lights operation

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals