2024-2026 Lexus LBX SUV Driving -> Safe Exit Assist User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Safe Exit Assist for Your Lexus LBX SUV First Generation (2024-2026)

315
4
4-5. Using the driving support systems
Driving
*
: If equipped
Center Display
Turning the safe exit assist on/off.
Outside rear view mirror indicators
When a vehicle or bicycle which may col-
lide with a door (other than the back door)
when opened is detected, the outside rear
view mirror indicator (P.95) on the
detected side will illuminate. If the door on
the detected side is open, or opening of the
door is canceled, the outside rear view
mirror indicator will blink.
Multi-information display
If collision with a door is likely and the door
is opened or opening of the door is can-
celed, the door will be displayed on the
multi-information display. Also, if a door is
opened when an outside rear view mirror
indicator is illuminated, a buzzer will sound
as a warning.
Driving assist information indicator
Illuminates when the safe exit assist is
turned off. At this time, a message will be
displayed on the multi-information display.
Speakers
When the outside rear view mirror indica-
tor blinks, the driver is informed through
voice guidance that the system has oper-
ated. After the notification through voice
guidance is made, no more voice guidance
Safe Exit Assist
*
The safe exit assist (with door open-
ing control) is a system that uses
rear side radar sensors installed on
the inner side of the rear bumper to
help occupants judge if an
approaching vehicle or bicycle may
collide with a door when exiting or
cancel opening of a door, to help
reduce the possibility of a collision.
WARNING
■ Cautions regarding the use of the
system
● The driver is solely responsible for safe
driving. Always drive safely, taking
care to observe your surroundings.
● The safe exit assist is a supplementary
system that, when the vehicle is
stopped, informs occupants of the
existence of approaching vehicles and
bicycles. As this system alone cannot
be used to judge safety, over-reliance
on this system may lead to an accident
resulting in death or serious injury.
In certain situations, this system may not
function to its fullest extent. Therefore it is
necessary for the occupants to visually
check for safety directly and using the
mirrors.
System components
A
B
C
D
E
316
4-5. Using the driving support systems
notifications will be made again until the
door is fully closed.
Door opener switch (manual
release handle)
If a door opener switch is operated to open
a door while the outside rear view mirror
indicator on that side is illuminated and the
system determines that the possibility of
the door or an exiting occupant colliding
with a vehicle or bicycle is high, opening of
the door will be canceled.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Buzzer
If the volume setting of the audio system is
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ Voice notifications
In the following situations, voice notifica-
tions will not be output:
● When it is estimated that no occupants
are on board
*
● After opening a door and entering the
vehicle, until the hybrid system is started
● When 3 minutes or more have elapsed
since the hybrid system was stopped
● When the language setting of the Center
Display has been set to a language that
does not support voice notifications
● When all of the doors have been locked
from outside the vehicle
● When a door remains open for 1 minute
or more after the hybrid system is
stopped
● When the ACC mode (P.556) has
been enabled through a customize set-
ting on the Center Display and the hybrid
system has been stopped
● When the parking assist volume setting
on the Center Display has been set to off
*
: For each seating position, judgment is
made based on the opening and closing
of a door, before driving for ingress and
after driving for egress.
■ Opening of a door can be canceled
when
Opening of a door can be canceled only
when the inside door opener switch is
pushed in. Opening of a door will not be
able to be canceled when the outside door
opener switch is used.
■ Customization
Some functions can be customized.
(P.556)
The safe exit assist system can be
enabled/disabled through a custom-
ize setting. (P.556)
When the safe exit assist is off, the driv-
ing assist information indicator will illu-
minate and a message will be displayed
on the multi-information display.
Each time the power switch is turned to
ON, the safe exit assist is enabled.
*
*
: When the power switch is turned off and
then to ON immediately after that, the
safe exit assist may not be enabled.
F
WARNING
■ To ensure the system can operate
properly
P.303
Turning the safe exit assist sys-
tem ON/OFF
317
4
4-5. Using the driving support systems
Driving
■ Objects that can be detected by the safe exit assist
When the safe exit assist detects the following vehicles or bicycles behind your
vehicle using a rear side radar sensor, the occupants of the vehicle are informed
through an outside rear view mirror indicator, buzzer, multi-information display,
and voice notification.
Vehicle or bicycle which has a high possibility of colliding with a door (other
than the back door) when opened
■ The safe exit assist detection areas
The areas that vehicles can be detected in are outlined below.
Approximately 45 m (145 ft.) rearward from the front door
*
*
: The faster a vehicle or bicycle is approaching, the distance at which an outside rear view
mirror indicator will illuminate or blink will become further.
■ The safe exit assist is operational when
The safe exit assist is operational when all of
the following conditions are met:
● When the power switch is ON, less than
3 minutes have elapsed since the hybrid
system was off, or less than 3 minutes
have elapsed since a door was opened
and someone has entered the vehicle
(the time which operation is possible may
be extended if a door is opened and
closed)
● Safe exit assist is on
● The vehicle is stopped.
Safe exit assist operation
A
A
318
4-5. Using the driving support systems
● The shift position is in a position other
than R.
■ The safe exit assist will detect a vehicle
when
The safe exit assist will detect a vehicle
present in the detection area in the follow-
ing situations:
● When the vehicle is stopped and a vehi-
cle or bicycle, which is traveling parallel
to the vehicle, is approaching within the
area that a door opens (other than the
back door)
■ Conditions under which the system will
not detect a vehicle
● Safe exit assist does not detect the fol-
lowing objects, vehicles, and bicycles:
• Vehicles or bicycles which are approach-
ing slowly
*
• Vehicles or bicycles which are deter-
mined to have a low possibility of collid-
ing with a door (other than the back
door) when opened
*
• Vehicles or bicycles which are approach-
ing from directly behind
*
• Vehicles or bicycles which are approach-
ing from the front
*
• Guardrails, walls, signs, parked vehicles,
and other stationary objects
*
• Pedestrians, animals, etc.
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
● In situations such as the following, safe
exit assist will not operate:
• When 3 minutes or more have elapsed
since the hybrid system off (the time
which operation is possible may be
extended if a door is opened and closed)
• When your vehicle is not completely
stopped
■ Opening the doors when opening is
canceled by the system
Perform the following operation to open a
door.
After the approaching vehicle or bicycle
passes or changes direction, check the sur-
rounding area and press the inside door
opener switch again. Perform the following
only in an emergency, etc., to open a door
while the warning is operating, after check-
ing the safety of the area around your vehi-
cle.
● Press and hold an inside door opener
switch for approximately 3 seconds or
more
● Press an inside door opener switch
quickly 3 times or more
● Pull a manual release handle
■ Conditions under which the system may
not function correctly
● The safe exit assist may not detect vehi-
cles correctly in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the rear bumper
• When the vehicle is stopped on a wet
road surface, such as in a puddle, while in
inclement weather, such as heavy rain,
snow, fog, etc.
• When a vehicle or bicycle approaches
from behind a nearby parked vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• Immediately after a vehicle or bicycle
starts moving
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When the vehicle is stopped at an angle
to the road
• When a vehicle is traveling near an
approaching vehicle or bicycle
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
319
4
4-5. Using the driving support systems
Driving
a curve
● Instances of the safe exit assist unneces-
sarily detecting a vehicle and/or object
may increase in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When a vehicle or bicycle approaches
your vehicle from directly behind in an
offset position
• When the vehicle is stopped at an angle
to the road
• When a vehicle or bicycle approaches
from behind a parked vehicle at an angle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
cent lane
*
: If equipped
■ Type of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
Front side sensors (vehicles with
Advanced Park)
Rear side sensors (vehicles with
Advanced Park)
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
Lexus parking assist-sensor
*
The Lexus parking assist-sensor
function detects the approximate
distance from the vehicle and an
object such as a wall using ultra-
sonic sensors and informs the
driver with the Center Display dis-
tance display and buzzer.
System components
A
B
C
D
E
F

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals