2024-2026 Lexus LBX SUV Driving -> Power (ignition) switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Power (ignition) switch for Your Lexus LBX SUV First Generation (2024-2026)

191
4
4-2. Driving procedures
Driving
4-2.Dri ving procedure s
1 Pull the parking brake switch to
check that the parking brake is set.
(P.205)
The Parking brake indicator will come on.
2 Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the hybrid system can-
not be started.
When the shift position is N, the hybrid sys-
tem cannot start. Shift the shift position to P
when starting the hybrid system. (P.198)
3 Press the power switch shortly and
firmly.
When operating the power switch, one
short, firm press is enough. It is not neces-
sary to press and hold the switch.
If the “READY” indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal until
the “READY” indicator is illuminated.
The hybrid system can be started from any
power switch mode.
4 Check that the “READY” indicator
is illuminated.
The vehicle cannot be driven if the
“READY” indicator is off.
■ Power switch illumination
According to the situation, the power
switch illumination operates as follows.
● When a front door is opened, or the
power switch mode is changed from
ACC or ON to OFF, the power switch
illumination illuminates dimly.
● When depressing the brake pedal with
carrying the electronic key on your per-
son, the power switch illumination illumi-
nates brightly.
● When the power switch is in ACC or
ON, the power switch illumination illumi-
nates.
■ If the hybrid system does not start
● The immobilizer system may not have
been deactivated. (P.85)
Contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
repairer.
● If a message related to start-up is shown
on the multi-information display, read the
message and follow the instructions.
● If the door is unlocked with the mechani-
cal key, the hybrid system cannot be
started using the smart entry & start sys-
tem. Refer to P.529 to start the hybrid
system. However, if the 0electronic key is
carried inside the vehicle and the doors
are locked (P.136), the hybrid system
Power (ignition) switch
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
192
4-2. Driving procedures
can be started.
■ When the ambient temperature is low,
such as during winter driving conditions
When starting the hybrid system, the flash-
ing time of the “READY” indicator may be
long. Leave the vehicle as it is until the
“READY” indicator is steady on, as steady
means the vehicle is able to move.
■ Sounds and vibrations specific to a
Hybrid Electric Vehicle
P.78
■ If the 12-volt battery is discharged
The hybrid system cannot be started using
the smart entry & start system. Refer to
P.533 to restart the hybrid system.
■ Electronic key battery depletion
P.128
■ Conditions affecting operation
P.151
■ Note for the entry function
P.152
■ Steering lock function (if equipped)
● After turning the power switch off and
opening and closing the doors, the steer-
ing wheel will be locked due to the steer-
ing lock function. Operating the power
switch again automatically cancels the
steering lock.
● When the steering lock cannot be
released, “Push POWER Switch while
Turning the Steering Wheel in Either
Direction” will be displayed on the multi-
information display.
Press the power switch shortly and firmly
while turning the steering wheel left and
right.
● To prevent the steering lock motor from
overheating, operation of the motor may
be suspended if the hybrid system is
turned on and off repeatedly in a short
period of time. In this case, refrain from
operating the hybrid system. After about
10 seconds, the steering lock motor will
resume functioning.
■ When “Smart Entry & Start System Mal-
function See Owner’s Manual” is dis-
played on the multi-information display
The system may be malfunctioning. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
■ If the “READY” indicator does not
come on
In the event that the “READY” indicator
does not come on even after performing
the proper procedures for starting the vehi-
cle, contact any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer immediately.
■ If the hybrid system is malfunctioning
P.83
■ Electronic key battery
P.474
■ Operation of the power switch
● If the switch is not pressed shortly and
firmly, the power switch mode may not
change or the hybrid system may not
start.
● If attempting to restart the hybrid system
immediately after turning the power
switch off, the hybrid system may not start
in some cases. After turning the power
switch off, please wait a few seconds
before restarting the hybrid system.
■ Customization
If the smart entry & start system has been
deactivated in a customized setting, refer to
P.528.
193
4
4-2. Driving procedures
Driving
1 Stop the vehicle completely.
2 If the parking brake is in manual
mode, set the parking brake.
(P.205)
3 Press the P position switch.
(P.198)
Check that the shift position indicator
shows P and the parking brake indicator is
illuminated.
4 Press the power switch.
The hybrid system will stop, and the meter
display will be extinguished (the shift posi-
tion indicator will be extinguished a few
seconds after the meter display).
5 Release the brake pedal and check
that “ACCESSORY” or “POWER
ON” is not shown on the meter.
■ When the shift control system malfunc-
tions
If the shift control system is malfunctioning,
when attempting to turn the power switch
off, it may not be able to be turned off. In this
situation, it may be possible to turn the
power switch off by applying the parking
brake and then operating the power switch.
If there is a malfunction in the system, have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
WARNING
■ When starting the hybrid system
Always start the hybrid system while sit-
ting in the driver’s seat. Do not depress
the accelerator pedal while starting the
hybrid system under any circumstances.
Doing so may cause an accident result-
ing in death or serious injury.
■ Caution while driving (vehicles with
steering lock function)
If hybrid system failure occurs while the
vehicle is moving, do not lock or open
the doors until the vehicle reaches a safe
and complete stop. Activation of the
steering lock in this circumstance may
lead to an accident, resulting in death or
serious injury.
NOTICE
■ When starting the hybrid system
If the hybrid system becomes difficult to
start, have your vehicle checked by any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer immediately.
■ Symptoms indicating a malfunction
with the power switch
If the power switch seems to be operat-
ing somewhat differently than usual, such
as the switch sticking slightly, there may
be a malfunction. Contact any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately.
Stopping the hybrid system
WARNING
■ Stopping the hybrid system in an
emergency
● If you want to stop the hybrid system in
an emergency while driving the vehi-
cle, press and hold the power switch
for more than 2 seconds, or press it
briefly 3 times or more in succession.
(P.482)
However, do not touch the power
switch while driving except in an emer-
gency. Turning the hybrid system off
while driving will not cause loss of
steering or braking control. However,
power assist for the steering wheel
may be lost making it difficult to steer
smoothly before stopping the vehicle
depending on the remaining charge in
the 12-volt battery or usage conditions.
In this situation, you should pull over
and stop the vehicle as soon as it is safe
to do so.
194
4-2. Driving procedures
Modes can be changed by pressing
the power switch with brake pedal
released. (The mode changes each
time the switch is pressed.)
“ACCESSORY”
“POWER ON”
1 OFF
The emergency flashers can be used.
2 ACC
*
Some electrical components such as the
power outlets can be used.
“ACCESSORY” will be displayed on the
meter.
3 ON
All electrical components can be used.
“POWER ON” will be displayed on the
meter.
*
: ACC mode can be enabled/disabled on
the customize menu. (P.570)
■ When ACC customization is in off
● With the power switch turned off, the
multimedia system can still be used for a
certain time until the battery saving func-
tion starts operating.
● When the safe exit assist is operating, a
buzzer will sound and a voice guidance
will be given.
■ Auto power off function
● If the vehicle is left in ACC or ON (the
hybrid system is not operating) for more
than 20 minutes with the shift position in
P, the power switch will automatically
turn to OFF.
● If the 12-volt battery is low with the shift
position is in P and the power switch is in
ACC or ON (the hybrid system is not
operating), a buzzer sounds and a mes-
sage will be displayed on the multi-infor-
mation display. If this continues, the
power switch is automatically turn to
OFF.
However, this function cannot entirely pre-
vent the 12-volt battery discharge. Do not
leave the vehicle with the power switch in
ACC or ON for long periods of time when
the hybrid system is not operating.
WARNING
● If the power switch is operated while
the vehicle is running, a warning mes-
sage will be shown on the multi-infor-
mation display and a buzzer sounds.
● When restarting the hybrid system
after an emergency shutdown, press
the power switch shortly and firmly.
Changing power switch modes
A
B
NOTICE
■ To prevent 12-volt battery discharge
● Do not leave the power switch in ACC
or ON for long periods of time without
the hybrid system on.
● If “ACCESSORY” or “POWER ON”
is displayed on the meter, the power
switch is not in OFF. Exit the vehicle
after turning the power switch to OFF.

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Driving procedures EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals