212
4-3. Operating the lights and wipers
position once and then back to or
.
■ Light reminder buzzer
A buzzer sounds when the power switch is
turned off or turned to ACC and the
driver’s door is opened while the lights are
turned on.
■ Automatic headlight leveling system (if
equipped)
The level of the headlights is automatically
adjusted according to the number of pas-
sengers and the loading condition of the
vehicle to ensure that the headlights do not
interfere with other road users.
■ 12-volt battery-saving function
In order to prevent the 12-volt battery of the
vehicle from discharging, if the light switch
is in the or position when the
power switch is turned off, the 12-volt bat-
tery saving function will operate and auto-
matically turn off all the lights after
approximately 10 minutes.
When the power switch is turned to ON,
the 12-volt battery-saving function will be
disabled.
When any of the following are performed,
the 12-volt battery-saving function is can-
celed once and then reactivated. All the
lights will turn off automatically 10 minutes
after the 12-volt battery- saving function has
been reactivated:
● When the headlight switch is operated
● When a door is opened or closed
■ Welcome light illumination control
The front position lights automatically turn
on at night when the doors are unlocked
using the entry function or wireless remote
control if the light switch is in the posi-
tion.
■ Customization
Settings (e.g. light sensor sensitivity) can be
changed.
(Customizable features: P.556)
1 With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2 Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
This system allows the headlights and
front position lights to be turned on for
30 seconds when the power switch is