2024-2026 Lexus LBX SUV Driving -> Driving procedures User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Driving procedures for Your Lexus LBX SUV First Generation (2024-2026)

191
4
4-2. Driving procedures
Driving
4-2.Dri ving procedure s
1 Pull the parking brake switch to
check that the parking brake is set.
(P.205)
The Parking brake indicator will come on.
2 Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the hybrid system can-
not be started.
When the shift position is N, the hybrid sys-
tem cannot start. Shift the shift position to P
when starting the hybrid system. (P.198)
3 Press the power switch shortly and
firmly.
When operating the power switch, one
short, firm press is enough. It is not neces-
sary to press and hold the switch.
If the “READY” indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal until
the “READY” indicator is illuminated.
The hybrid system can be started from any
power switch mode.
4 Check that the “READY” indicator
is illuminated.
The vehicle cannot be driven if the
“READY” indicator is off.
■ Power switch illumination
According to the situation, the power
switch illumination operates as follows.
● When a front door is opened, or the
power switch mode is changed from
ACC or ON to OFF, the power switch
illumination illuminates dimly.
● When depressing the brake pedal with
carrying the electronic key on your per-
son, the power switch illumination illumi-
nates brightly.
● When the power switch is in ACC or
ON, the power switch illumination illumi-
nates.
■ If the hybrid system does not start
● The immobilizer system may not have
been deactivated. (P.85)
Contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable
repairer.
● If a message related to start-up is shown
on the multi-information display, read the
message and follow the instructions.
● If the door is unlocked with the mechani-
cal key, the hybrid system cannot be
started using the smart entry & start sys-
tem. Refer to P.529 to start the hybrid
system. However, if the 0electronic key is
carried inside the vehicle and the doors
are locked (P.136), the hybrid system
Power (ignition) switch
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
192
4-2. Driving procedures
can be started.
■ When the ambient temperature is low,
such as during winter driving conditions
When starting the hybrid system, the flash-
ing time of the “READY” indicator may be
long. Leave the vehicle as it is until the
“READY” indicator is steady on, as steady
means the vehicle is able to move.
■ Sounds and vibrations specific to a
Hybrid Electric Vehicle
P.78
■ If the 12-volt battery is discharged
The hybrid system cannot be started using
the smart entry & start system. Refer to
P.533 to restart the hybrid system.
■ Electronic key battery depletion
P.128
■ Conditions affecting operation
P.151
■ Note for the entry function
P.152
■ Steering lock function (if equipped)
● After turning the power switch off and
opening and closing the doors, the steer-
ing wheel will be locked due to the steer-
ing lock function. Operating the power
switch again automatically cancels the
steering lock.
● When the steering lock cannot be
released, “Push POWER Switch while
Turning the Steering Wheel in Either
Direction” will be displayed on the multi-
information display.
Press the power switch shortly and firmly
while turning the steering wheel left and
right.
● To prevent the steering lock motor from
overheating, operation of the motor may
be suspended if the hybrid system is
turned on and off repeatedly in a short
period of time. In this case, refrain from
operating the hybrid system. After about
10 seconds, the steering lock motor will
resume functioning.
■ When “Smart Entry & Start System Mal-
function See Owner’s Manual” is dis-
played on the multi-information display
The system may be malfunctioning. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
■ If the “READY” indicator does not
come on
In the event that the “READY” indicator
does not come on even after performing
the proper procedures for starting the vehi-
cle, contact any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer immediately.
■ If the hybrid system is malfunctioning
P.83
■ Electronic key battery
P.474
■ Operation of the power switch
● If the switch is not pressed shortly and
firmly, the power switch mode may not
change or the hybrid system may not
start.
● If attempting to restart the hybrid system
immediately after turning the power
switch off, the hybrid system may not start
in some cases. After turning the power
switch off, please wait a few seconds
before restarting the hybrid system.
■ Customization
If the smart entry & start system has been
deactivated in a customized setting, refer to
P.528.
193
4
4-2. Driving procedures
Driving
1 Stop the vehicle completely.
2 If the parking brake is in manual
mode, set the parking brake.
(P.205)
3 Press the P position switch.
(P.198)
Check that the shift position indicator
shows P and the parking brake indicator is
illuminated.
4 Press the power switch.
The hybrid system will stop, and the meter
display will be extinguished (the shift posi-
tion indicator will be extinguished a few
seconds after the meter display).
5 Release the brake pedal and check
that “ACCESSORY” or “POWER
ON” is not shown on the meter.
■ When the shift control system malfunc-
tions
If the shift control system is malfunctioning,
when attempting to turn the power switch
off, it may not be able to be turned off. In this
situation, it may be possible to turn the
power switch off by applying the parking
brake and then operating the power switch.
If there is a malfunction in the system, have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
WARNING
■ When starting the hybrid system
Always start the hybrid system while sit-
ting in the driver’s seat. Do not depress
the accelerator pedal while starting the
hybrid system under any circumstances.
Doing so may cause an accident result-
ing in death or serious injury.
■ Caution while driving (vehicles with
steering lock function)
If hybrid system failure occurs while the
vehicle is moving, do not lock or open
the doors until the vehicle reaches a safe
and complete stop. Activation of the
steering lock in this circumstance may
lead to an accident, resulting in death or
serious injury.
NOTICE
■ When starting the hybrid system
If the hybrid system becomes difficult to
start, have your vehicle checked by any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer immediately.
■ Symptoms indicating a malfunction
with the power switch
If the power switch seems to be operat-
ing somewhat differently than usual, such
as the switch sticking slightly, there may
be a malfunction. Contact any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately.
Stopping the hybrid system
WARNING
■ Stopping the hybrid system in an
emergency
● If you want to stop the hybrid system in
an emergency while driving the vehi-
cle, press and hold the power switch
for more than 2 seconds, or press it
briefly 3 times or more in succession.
(P.482)
However, do not touch the power
switch while driving except in an emer-
gency. Turning the hybrid system off
while driving will not cause loss of
steering or braking control. However,
power assist for the steering wheel
may be lost making it difficult to steer
smoothly before stopping the vehicle
depending on the remaining charge in
the 12-volt battery or usage conditions.
In this situation, you should pull over
and stop the vehicle as soon as it is safe
to do so.
194
4-2. Driving procedures
Modes can be changed by pressing
the power switch with brake pedal
released. (The mode changes each
time the switch is pressed.)
“ACCESSORY”
“POWER ON”
1 OFF
The emergency flashers can be used.
2 ACC
*
Some electrical components such as the
power outlets can be used.
“ACCESSORY” will be displayed on the
meter.
3 ON
All electrical components can be used.
“POWER ON” will be displayed on the
meter.
*
: ACC mode can be enabled/disabled on
the customize menu. (P.570)
■ When ACC customization is in off
● With the power switch turned off, the
multimedia system can still be used for a
certain time until the battery saving func-
tion starts operating.
● When the safe exit assist is operating, a
buzzer will sound and a voice guidance
will be given.
■ Auto power off function
● If the vehicle is left in ACC or ON (the
hybrid system is not operating) for more
than 20 minutes with the shift position in
P, the power switch will automatically
turn to OFF.
● If the 12-volt battery is low with the shift
position is in P and the power switch is in
ACC or ON (the hybrid system is not
operating), a buzzer sounds and a mes-
sage will be displayed on the multi-infor-
mation display. If this continues, the
power switch is automatically turn to
OFF.
However, this function cannot entirely pre-
vent the 12-volt battery discharge. Do not
leave the vehicle with the power switch in
ACC or ON for long periods of time when
the hybrid system is not operating.
WARNING
● If the power switch is operated while
the vehicle is running, a warning mes-
sage will be shown on the multi-infor-
mation display and a buzzer sounds.
● When restarting the hybrid system
after an emergency shutdown, press
the power switch shortly and firmly.
Changing power switch modes
A
B
NOTICE
■ To prevent 12-volt battery discharge
● Do not leave the power switch in ACC
or ON for long periods of time without
the hybrid system on.
● If “ACCESSORY” or “POWER ON”
is displayed on the meter, the power
switch is not in OFF. Exit the vehicle
after turning the power switch to OFF.
195
4
4-2. Driving procedures
Driving
Turns EV drive mode on/off
When EV drive mode is turned on, the EV
drive mode indicator will come on.
Pressing the switch when in EV drive mode
will return the vehicle to normal driving
(using the gasoline engine and electric
motor [traction motor]).
■ Situations in which EV drive mode can-
not be turned on
It may not be possible to turn EV drive
mode on in the following situations. If it can-
not be turned on, a buzzer will sound and a
message will be shown on the multi-infor-
mation display.
● The temperature of the hybrid system is
high.
The vehicle has been left in the sun,
driven on a hill, driven at high speeds, etc.
● The temperature of the hybrid system is
low.
The vehicle has been left in temperatures
lower than about 0°C (32°F) for a long
period of time, etc.
● The gasoline engine is warming up.
● The hybrid battery (traction battery) is
low.
The remaining battery level indicated in
the energy monitor display is low.
(P.121)
● Vehicle speed is high.
● The accelerator pedal is depressed firmly
or the vehicle is on a hill, etc.
● The windshield defogger is in use.
■ Switching to EV drive mode when the
gasoline engine is cold
If the hybrid system is started while the gas-
oline engine is cold, the gasoline engine will
start automatically after a short period of
time in order to warm up. In this case, you
will become unable to switch to EV drive
mode.
After the hybrid system has started and the
“READY” indicator has illuminated, press
the EV drive mode switch before the gaso-
line engine starts to switch to EV drive
mode.
■ Automatic cancelation of EV drive
mode
When driving in EV drive mode, the gaso-
line engine may automatically restart in the
following situations. When EV drive mode
is canceled, a buzzer will sound, the EV
drive mode indicator will go off after flash-
ing, and a message is displayed on the
multi-information display.
● The hybrid battery (traction battery)
becomes low.
The remaining battery level indicated in
the energy monitor display is low.
(P.121)
EV drive mode
In EV drive mode, electric power is
supplied by the hybrid battery
(traction battery), and only the
electric motor (traction motor) is
used to drive the vehicle.
This mode allows you to drive in res-
idential areas early in the morning
and late at night, or in indoor park-
ing lots, etc., without concern for
noises and gas emissions.
When the Acoustic Vehicle Alert-
ing System is active, the vehicle
may produce sound.
Operating instructions
196
4-2. Driving procedures
● Vehicle speed is high.
● The accelerator pedal is depressed firmly
or the vehicle is on a hill, etc.
■ Possible driving distance when driving
in EV drive mode
EV drive mode’s possible driving distance
ranges from a few hundred meters to
approximately 1 km (0.6 mile). However,
depending on vehicle conditions, there are
situations when EV drive mode cannot be
used. (The distance that is possible depends
on the hybrid battery [traction battery] level
and driving conditions.)
■ Fuel economy
The hybrid system is designed to achieve
the best possible fuel economy during nor-
mal driving (using the gasoline engine and
electric motor [traction motor]). Driving in
EV drive mode more than necessary may
lower fuel economy.
■ If “EV Mode Unavailable” is shown on
the multi-information display
The EV drive mode is not available. The
reason the EV drive mode is not available
(the vehicle is idling, battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Use the EV drive mode when it
becomes available.
■ If “EV Mode Deactivated” is shown on
the multi-information display
The EV drive mode has been automatically
canceled. The reason the EV drive mode is
not available (the battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Drive the vehicle for a while
before attempting to turn on the EV drive
mode again.
WARNING
■ Caution while driving
When driving in EV drive mode, pay spe-
cial attention to the area around the vehi-
cle. Because there is no engine noise,
pedestrians, people riding bicycles or
other people and vehicles in the area
may not be aware of the vehicle starting
off or approaching them. Take extra care
while driving even if the Acoustic Vehicle
Alerting System is active.
197
4
4-2. Driving procedures
Driving
Vehicles without paddle shift
switches
*
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving.
Vehicles with paddle shift switches
*1
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving. You can choose gear range
suitable for your driving situation by
operating the paddle shift switches.
*2
: By selecting shift ranges using S mode,
you can control accelerating force and
engine braking force.
■ When driving with dynamic radar cruise
control activated (vehicles with paddle
shift switches)
Even when performing the downshifting to
5 or 4 with the intent of enabling engine
braking while driving in D or S mode,
engine braking will not activate because
dynamic radar cruise control with full-
speed range will not be canceled.
(P.202)
■ If a message about a shift operation is
shown
To prevent the shift position from being
selected incorrectly or the vehicle from
moving unexpectedly, the shift position may
be changed automatically or operating the
shift lever may be required. In this case,
change the shift position following the mes-
sages on the multi-information display.
■ Restraining sudden start (Drive-Start
Control)
P.182
Transmission
Select the shift position depending
on your purpose and situation.
Shift position purpose and func-
tions
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*
B
Applying engine braking or
strong braking when the
accelerator pedal has been
released on steep downward
slopes etc.
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*1
S
S mode driving
*2
(P.203)
Shift posi-
tion
Objective or function
198
4-2. Driving procedures
Vehicles without paddle shift
switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to B is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, B or R to P, from D or B to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
P position switch
Fully stop the vehicle and set the parking
WARNING
■ When driving on slippery road sur-
faces
Do not accelerate or shift the shift posi-
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
■ Hybrid battery (traction battery)
charge
If the shift position is in N, the hybrid bat-
tery (traction battery) will not be
charged. To help prevent the battery
from discharging, avoid leaving the N
position selected for a certain amount of
time.
■ Situations where shift control system
malfunctions are possible
If any of the following situations occurs,
shift control system malfunctions are
possible.
Immediately stop the vehicle in a safe
place on level ground, apply the parking
brake, and then contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
● When the warning message indicating
the shift control system appears on the
multi-information display. (P.499)
● The display indicates that no shift posi-
tion is selected for more than a few
seconds.
Shift position display and how to
change the shift position
A
B
199
4
4-2. Driving procedures
Driving
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
Vehicles with paddle shift switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to S is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, S or R to P, from D or S to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
P position switch
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
■ Changing the shift position in each
power switch mode
● The shift position cannot be changed
when the power switch is in ACC or off.
● When the power switch is in ON, if the
READY indicator is not illuminated, the
shift position can only be changed to N.
● When the READY indicator is illumi-
nated, the shift position can be changed
from P to D, N, or R.
● When the READY indicator is flashing,
the shift position cannot be changed from
P to any other position, even if the shift
lever is operated. Operate the shift lever
again after the READY indicator
C
A
B
C
200
4-2. Driving procedures
changes from flashing to illuminated.
■ Shifting the shift position from P to other
positions
● While depressing the brake pedal firmly,
operate the shift lever. If the shift lever is
operated without depressing the brake
pedal, the buzzer will sound and the shift-
ing operation will be disabled.
● When selecting the shift position, make
sure that the shift position has been
changed to the desired position by
checking the shift position indicator pro-
vided on the instrument cluster.
● The shift position cannot be changed
from P to B
*1
or S
*2
directly.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position cannot be changed
when
In the following situations, a buzzer will
sound to inform you that the shift position
cannot be changed. Use the appropriate
operation to attempt to change the shift
position again.
● When attempting to change the shift
position from P with the brake pedal not
depressed
● When attempting to change the shift
position from P with the accelerator
pedal depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the brake
pedal not depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the accel-
erator pedal depressed
● When attempting to change the shift
position from P or N to B
*1
or S
*2
● When the P position switch is pressed
while driving
When driving at an extremely low speed,
the shift position may change to P.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position automatically changes
to N when
In the following situations, a buzzer will
sound to inform you that the shift position
has been changed to N. Use the appropri-
ate operation to attempt to change the shift
position again.
● When attempting to change the shift
position to R while the vehicle is moving
forward
When driving at a low speed, the shift posi-
tion may change to R.
● When attempting to change the shift
position to D while the vehicle is moving
backward
When driving at a low speed, the shift posi-
tion may change to D.
● When attempting to change the shift
position from R to B
*1
or S
*2
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ If the N shift position is selected while
driving
If the shift lever is moved to N while driving
above a certain speed, the shift position will
change to N without holding the shift lever
in the N position. In this situation, a buzzer
will sound and a message will be displayed
on the multi-information display to inform
you that the shift position has been changed
to N.
■ Automatic P position selection function
In the following situations, the shift position
is automatically changed to P.
● When pressing the power switch with the
vehicle stopped while the power switch is
in ON and the shift position is in a posi-
tion other than P (after the shift position
has changed to P, the power switch will
turn off)
*
● If the driver’s door is opened and all of the
following conditions are met, while the
shift position is in a position other than P
201
4
4-2. Driving procedures
Driving
• The power switch is in ON.
• The driver is not wearing the seat belt.
• The brake pedal is not depressed.
To start off the vehicle after the shift position
is changed to P, operate the shift lever
again.
● When the vehicle is stopped after the
hybrid system has been stopped in an
emergency while driving.
● When voltage of the 12-volt battery
drops while the shift position is in a posi-
tion other than P.
*
: When the power switch is pressed while
driving at extremely slow speeds, such as
immediately before stopping the vehicle,
the shift position may automatically
change to P. Make sure that the vehicle is
completely stopped before pressing the
power switch.
■ If the shift position cannot be shifted
from P
There is a possibility that the 12-volt battery
is discharged. Check the 12-volt battery in
this situation. (P.533)
■ Customization
Some functions can be customized.
(P.556)
By performing the following opera-
tion, the shift position can be held in
N until the shift position switches to
P without activating the automatic P
position selection function.
1 Operate the shift lever and change
the shift position to N when the
hybrid system is operating.
2 Return the shift lever to its regular
position ( ).
3 Operate the shift lever to N and
hold it there until the buzzer
sounds.
WARNING
■ For the shift lever
● Do not remove the shift lever knob or
use anything but a genuine Lexus shift
lever knob. Also, do not hang anything
on the shift lever. Doing so could pre-
vent the shift lever from returning to
position, causing unexpected acci-
dents to occur when the vehicle is in
motion.
● In order to prevent the shift position
from accidentally being changed, do
not touch the shift lever when not using
them.
■ P position switch
● Do not press the P position switch
while the vehicle is moving.
If the P position switch is pressed when
driving at very low speeds (for example,
directly before stopping the vehicle), the
vehicle may stop suddenly when the shift
position switches to P, which could lead
to an accident.
● In order to prevent the shift position
from accidentally being changed, do
not touch the P position switch when
not using them.
NOTICE
■ When exiting the vehicle (driver’s
seat only)
Check that the shift position indicator
shows P and that the parking brake indi-
cator is illuminated before opening the
door and exiting the vehicle.
Keeping the shift position in N
without activating the automatic
P position selection function
202
4-2. Driving procedures
4 Press the power switch within 5
seconds after the buzzer sounds.
The hybrid system stops with the shift posi-
tion in N.
*
Make sure to check that the buzzer sounds
and “Holding N Push P Switch When
Done” is displayed on the multi-informa-
tion display.
In order to shift to a position other
than N, first press the P position
switch to change the shift position to
P.
If the automatic P position switching
operation selection function is per-
formed operated with the hybrid
system stopped, the automatic P
position selection function may not
operate.
Always perform the operation with
the hybrid system started.
Make sure to operate the shift lever
with the hybrid system is operating.
If the hybrid system is not operating,
it may not be possible to hold the
shift position in N.
*
: To keep this state, do not operate the
power switch. If the power switch is
operated repeatedly, the power switch
will turn off after the shift position has
automatically changed to P.
Use Eco drive mode to help achieve
low fuel consumption during trips that
involve frequent accelerating and
braking.
Press the “ECO MODE” switch to
select Eco drive mode.
The “ECO” indicator will come on.
Press the switch again to cancel Eco
drive mode.
The Eco drive mode will remain on or
off even if the power switch is turned
off.
■ Operation of the air conditioning sys-
tem in Eco drive mode
Eco drive mode controls the heating/cool-
ing operations and fan speed of the air con-
ditioning system to enhance fuel efficiency
(P.403). To improve air conditioning
performance, adjust the fan speed or turn
off Eco drive mode.
To drive using temporary shift range
selection, operate the “-” paddle shift
switch.
Changing the shift range enables the
level of engine braking force to be
selected.
The shift range can then be selected by
operating the “-” and “+” paddle shift
switches.
Selecting the Eco drive mode
Selecting shift ranges in the D
position (vehicles with paddle
shift switches)
203
4
4-2. Driving procedures
Driving
1 Upshifting
2 Downshifting
The selected shift range, from D1 to D6,
will be displayed on the multi-information
display.
To return to normal D position driving,
hold the “+” puddle shift switch for a period
of time.
■ Shift ranges and their functions
You can choose from 5 levels of
engine braking force.
A lower shift range will provide
greater engine braking force than a
higher shift range, and the engine
revolutions will also increase.
■ When the “-” paddle shift switch is oper-
ated in the D position
The shift range is downshifted to a range
that enables engine braking force that is
suitable to driving conditions.
■ Automatic deactivation of shift range
selection in the D position
Shift range selection in the D position will
be deactivated in the following situations:
● When the vehicle comes to a stop
● If the accelerator pedal is depressed for
more than a certain period of time
● When the shift position is shifted to a
position other than D
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the paddle shift switch is operated. (A
buzzer will sound twice.)
To enter S mode, shift the shift position
to S. Shift ranges can be selected by
operating the paddle shift switches,
allowing you to drive in the shift range
of your choosing. The shift range can
then be selected by operating the “-”
and “+” paddle shift switches.
1 Upshifting
2 Downshifting
The selected shift range, from S1 to S6, will
be displayed on the meter.
The initial shift range in S mode is automat-
ically set to S4.
■ Shift ranges and their functions
You can choose from 6 levels of
accelerating force and engine brak-
ing force.
A lower shift range will provide
Selecting shift ranges in the S
mode (vehicles with paddle shift
switches)
204
4-2. Driving procedures
greater accelerating force and
engine braking force than a higher
shift range, and the engine revolu-
tions will also increase.
■ S mode
● To prevent the engine from over-revving,
upshifting may automatically occur.
● When in S4 or lower, if the paddle shift
switch is held toward “+” the shift range
will be set to S6.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the paddle shift switch is operated. (A
buzzer will sound twice.)
The turn signal lever can be used to
show the following intentions of the
driver.
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The power switch is in ON.
■ If the indicator flashes faster than usual
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Turn signal lever
Operating instructions
205
4
4-2. Driving procedures
Driving
■ If the turn signals stop flashing before a
lane change has been performed
Operate the lever again.
■ Using the manual mode
The parking brake can be set and
released manually.
Parking brake indicator light
1 Pull the switch to set the parking
brake
The parking brake indicator light will turn
on.
Pull and hold the parking brake switch if an
emergency occurs and it is necessary to
operate the parking brake while driving.
2 Press the switch to release the
Parking brake
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to shift position
operation. Also, even in automatic
mode, the parking brake can be set
or released manually.
Operating instructions
A
206
4-2. Driving procedures
parking brake
• Operate the parking brake switch while
depressing the brake pedal.
• Using the parking brake automatic
release function, the parking brake can
be released by depressing the accelera-
tor pedal. When using this function,
slowly depress the accelerator pedal.
(P.206)
Make sure that the parking brake indicator
light turn off. If the parking brake indicator
light flash, operate the switch again.
(P.497)
■ Turning the automatic mode on
While the vehicle is stopped, pull and
hold the parking brake switch until a
buzzer sounds and a message is shown
on the multi-information display
When the automatic mode is turned
on, the parking brake operates as fol-
lows.
When the shift position is shifted
from P, the parking brake will be
released, and the parking brake
indicator light will turn off.
When the shift position is shifted to
P, the parking brake will be set, and
the parking brake indicator light will
turn on.
Operate the shift position and P posi-
tion switch with the vehicle stopped
and the brake pedal depressed.
The auto function may not operate if
the shift lever is moved extremely
quickly or the brake pedal is not firmly
depressed. In this situation, apply the
parking brake manually. (P.205)
When the hybrid system is off, the
parking brake will be set, and the
parking brake indicator light turn
on.
■ Turning the automatic mode off
While the vehicle is stopped and
depressing the brake pedal, press and
hold the parking brake switch until a
buzzer sounds and a message is shown
on the multi-information display.
■ Parking brake operation
● When the power switch is not in ON, the
parking brake cannot be released using
the parking brake switch.
● When the power switch is not in ON,
automatic mode (automatic brake setting
and releasing) is not available.
■ Parking brake automatic release func-
tion
When all of the following conditions are
met, the parking brake can be released by
depressing the accelerator pedal.
● The driver’s door is closed
● The driver is wearing the seat belt
● The shift position is in a forward driving
position or reverse driving position
● The malfunction indicator lamp or brake
system warning light is not illuminated.
When depressing the accelerator pedal,
depress it slowly.
If the parking brake is not released when
the accelerator pedal is depressed, release
the parking brake manually.
When the shift position is shifted from P, the
parking brake will be released automati-
cally.
■ Parking brake automatic lock function
The parking brake will be set automatically
under the following conditions:
● The brake pedal is not depressed
● The driver’s door is open
● The driver’s seat belt is not fastened
207
4
4-2. Driving procedures
Driving
● The shift position is in a position other
than P or N
(The shift position is in P during Advanced
Park
*
operation.)
● The malfunction indicator lamp and
brake system warning light are not illumi-
nated
*
: If equipped
■ If “Parking Brake Temporarily Unavail-
able” is displayed on the multi-informa-
tion display
If the parking brake is operated repeatedly
over a short period of time, the system may
restrict operation to prevent overheating. If
this happens, refrain from operating the
parking brake. Normal operation will return
after about 1 minute.
■ If “Parking Brake Unavailable” is dis-
played on the multi-information display
Operate the parking brake switch. If the
message does not disappear after operat-
ing the switch several times, the system may
be malfunctioning. Have the vehicle
inspected by any authorized Lexus retailer
or Lexus authorized repairer, or any reli-
able repairer.
■ Parking brake operation sound
When the parking brake operates, a motor
sound (whirring sound) may be heard. This
does not indicate a malfunction.
■ Parking brake indicator light
● Depending on the power switch mode,
the parking brake indicator light will turn
on and stay on as described below:
ON: Comes on until the parking brake is
released.
Not in ON: Stays on for approximately 15
seconds.
● When the power switch is turned off with
the parking brake set, the parking brake
indicator light will stay on for about 15
seconds. This does not indicate a mal-
function.
■ When the parking brake switch mal-
functions
Automatic mode (automatic brake setting
and releasing) will be turned on automati-
cally.
■ Parking the vehicle
P.177
■ Parking brake engaged warning buzzer
A buzzer will sound if the vehicle is driven
with the parking brake engaged. “Parking
Brake ON” is displayed on the multi-infor-
mation display (with the vehicle reaching a
speed of 5 km/h [3 mph]).
■ If the brake system warning light comes
on
P.490
■ Usage in winter time
P.392
WARNING
■ When parking the vehicle
Do not leave a child in the vehicle alone.
The parking brake may be released unin-
tentionally by a child and there is the dan-
ger of the vehicle moving that may lead
to an accident resulting in death or seri-
ous injury.
■ Parking brake switch
Do not set any objects near the parking
brake switch. Objects may interfere with
the switch and may lead the parking
brake to unexpectedly operate.
■ Parking brake automatic lock func-
tion
Never use the automatic parking brake
engagement function in place of normal
parking brake operation. This function is
designed to reduce the risk of a collision
due to the driver forgetting to engage
the parking brake. Over-reliance on this
function to park the vehicle safely may
lead to an accident resulting in death or
serious injury.
208
4-2. Driving procedures
Turns the brake hold system on
The brake hold standby indicator
(green) comes on. While the system is
holding the brake, the brake hold operated
indicator (yellow) comes on.
■ Brake hold system operating conditions
The brake hold system cannot be turned on
in the following conditions:
● The driver’s door is not closed.
● The driver is not wearing the seat belt.
NOTICE
■ When parking the vehicle
Before you leave the vehicle, shift the
shift position to P, set the parking brake
and make sure that the vehicle does not
move.
■ When the system malfunctions
Stop the vehicle in a safe place and
check the warning messages.
■ When the vehicle 12-volt battery is
discharged
The parking brake system cannot be
activated. (P.533)
■ When the parking brake cannot be
released due to a malfunction
Driving the vehicle with the parking
brake set will lead to brake components
overheating, which may affect braking
performance and increase brake wear.
Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi-
ately if this occurs.
Brake Hold
The brake hold system keeps the
brake applied when the shift posi-
tion is in D, B
*1
, S
*2
, N or P with the
system on and the brake pedal has
been depressed to stop the vehicle.
The system releases the brake
when the accelerator pedal is
depressed with the shift position in
D, B
*1
or S
*2
to allow smooth start
off.
*1
: Vehicles without paddle shift
switches
*2
: Vehicles with paddle shift switches
Enabling the system
A
B
209
4
4-2. Driving procedures
Driving
● “Parking Brake Unavailable” or “Parking
Brake Malfunction Visit Your Dealer” is
displayed on the multi-information dis-
play.
If any of the conditions above are detected
when the brake hold system is enabled, the
system will turn off and the brake hold
standby indicator light will go off. In addi-
tion, if any of the conditions are detected
while the system is holding the brake, a
warning buzzer will sound and a message
will be shown on the multi-information dis-
play. The parking brake will then be set
automatically.
■ Brake hold function
● If the brake pedal is left released for a
period of about 3 minutes after the sys-
tem has started holding the brake, the
parking brake will be set automatically. In
this case, a warning buzzer sounds and a
message is shown on the multi-informa-
tion display.
● To turn the system off while the system is
holding the brake, firmly depress the
brake pedal and press the button again.
● The brake hold function may not hold the
vehicle when the vehicle is on a steep
incline. In this situation, it may be neces-
sary for the driver to apply the brakes. A
warning buzzer will sound and the multi-
information display will inform the driver
of this situation. If a warning message is
shown on the multi-information display,
read the message and follow the instruc-
tions.
● When do not wish for the parking brake
to operate automatically, press and hold
the brake hold switch until the standby
indicator (green) turns off, and then turn
the power switch off.
■ When the parking brake is set automati-
cally while the system is holding the
brakes
Perform any of the following operations to
release the parking brake.
● Depress the accelerator pedal. (The
parking brake will not be released auto-
matically if the seat belt is not fastened.)
● Operate the parking brake switch with
the brake pedal depressed.
Make sure that the parking brake indicator
light goes off. (P.205)
■ When an inspection at any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer is nec-
essary
When the brake hold standby indicator
(green) does not illuminate even when the
brake hold switch is pressed with the brake
hold system operating conditions met, the
system may be malfunctioning. Have the
vehicle inspected at any authorized Lexus
retailer or Lexus authorized repairer, or any
reliable repairer.
■ If “Brake Hold Malfunction Visit Your
Dealer” is displayed on the multi-infor-
mation display
The system may be malfunctioning. Have
the vehicle inspected by any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer immediately.
■ Warning messages and buzzers
Warning messages and buzzers are used to
indicate a system malfunction or to inform
the driver of the need for caution. If a warn-
ing message is shown on the multi-informa-
tion display, read the message and follow
the instructions.
■ If the brake hold operated indicator
flashes
P.497
WARNING
■ When the vehicle is on a steep incline
Take care when using the brake hold sys-
tem on a steep incline, exercise caution.
The brake hold function may not hold
brakes in such situations. Also, the sys-
tem may not activate depending on the
angle of the slope.
210
4-2. Driving procedures
WARNING
■ When stopped on a slippery road
The system cannot stop the vehicle when
the gripping ability of the tires has been
exceeded. Do not use the system when
stopped on a slippery road.
NOTICE
■ When parking the vehicle
The brake hold system is not designed
for use when parking the vehicle for a
long period of time. Turning the power
switch off while the system is holding the
brake may release the brake, which
would cause the vehicle to move. When
operating the power switch, depress the
brake pedal, shift the shift position to P
and set the parking brake.

Related Topics

Before driving Driving the vehicle Cargo and luggage Trailer towing (vehicles without towing package) Trailer towing (vehicles with towing package) Power (ignition) switch EV drive mode Transmission Turn signal lever Parking brake Brake Hold Operating the lights and wipers Headlight switch AHS (Adaptive High-beam System) AHB (Automatic High Beam) Fog light switch Windshield wipers and washer Rear window wiper and washer Refueling Opening the fuel tank cap Using the driving support systems Lexus Safety System + software update Lexus Safety System + Driver monitor PCS (Pre-Collision System) LTA (Lane Tracing Assist) LCA (Lane Change Assist) LDA (Lane Departure Alert) PDA (Proactive driving assist) FCTA (Front Crossing Traffic Alert) RSA (Road Sign Assist) Dynamic radar cruise control Cruise control Emergency Driving Stop System Speed limiter BSM (Blind Spot Monitor) Rear Vehicle Approaching Indication Automatic Rear Flashing Hazard Lights Secondary Collision Brake (Rear Impacts while Stopped) Safe Exit Assist Lexus parking assist-sensor RCTA (Rear Crossing Traffic Alert) function RCD (Rear Camera Detection) PKSB (Parking Support Brake) Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle) Parking Support Brake function (moving vehicles rear of the vehicle) Parking Support Brake function (pedestrians rear of the vehicle) Lexus Teammate Advanced Park GPF (Gasoline Particulate Filter) system Driving assist systems Driving tips Hybrid Electric Vehicle driving tips Winter driving tips Utility vehicle precautions

Popular Owner Manuals