Advertisement

Advertisement

Air conditioning system -> 1.6.9 General information about blowing through with compressed air or nitrogen for Your Volkswagen Touran 4 Door Second Generation (2015-2022)

Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
lk  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
Tiguan 2016 ▶, Tiguan MEX 2017 ▶  
Vehicle  
Adapters required for refriger‐ Adapters required for re‐  
ant pipes to air conditioner frigerant pipes to receiver  
compressor  
Miscellaneous  
Tiguan 2016 ▶, Ti‐  
guan MEX 2017 ▶  
♦ Low pressure side adapter  
- VAS 6338/12- connected  
to air conditioner service  
station and adapter - VAS  
6338/48- .  
Remove desiccant  
bag/cartridge and seal  
receiver.  
Install a–dapter - VAS  
6338/38- in place of ex‐  
pansion valve (or a dril‐  
led out expansion valve  
⇒ page 96 )  
After flushing, install a  
new desiccant bag/car‐  
tridge.  
♦ High pressure side adapter  
- VAS 6338/3-  
After flushing, install a  
new expansion valve.  
If a cond–enser/receiver  
with permanently in‐  
stalled desiccant bag /  
cartridge is installed,  
leave the condenser/  
receiver in situ and  
flush the refrigerant cir‐  
cuit.  
After flushing, install a  
new receiver.  
Note  
On vehicles having condensers with an integrated receiver/des‐  
iccant cartridge which cannot be renewed separately or which is  
not available as a separate replacement part, the condenser must  
be renewed after flushing (together with integrated desiccant car‐  
tridge) ⇒ Heating, air conditioning; Rep. gr. 87 ; Refrigerant  
circuit; System overview - refrigerant circuit and ⇒ Electronic  
parts catalogue .  
Touareg 2015 ▶  
Vehicle  
Adapters required for refrigerant  
Adapters required for re‐  
Miscellaneous  
pipes to air conditioner compressor frigerant pipes to receiver  
Touareg 2015 ▶ ♦ Low pressure side adapter - VAS  
6338/12- connected to air condi‐  
tioner service station and adapter  
- VAS 6338/48- .  
Removedesiccant car‐  
tridge and seal receiv‐  
er.  
Install a–dapter - VAS  
6338/17- or adapter -  
VAS 6338/33- in place  
of front and rear expan‐  
sion valves (or a drilled  
out expansion valve  
⇒ page 96 )  
After flushing, install a  
new dryer cartridge.  
♦ Low-pressure line for  
second evaporator  
adapter - VAS 6338/3-  
♦ High-pressure side adapter - VAS  
6338/2- or adapter - VAS 6338/3-  
Electrical air conditioner com‐  
pressor, adapter - VAS 6338/40-  
and adapter - VAS 6338/41-  
After flushing, install a  
new expansion valve.  
♦ High-pressure line for  
second evaporator  
adapter - VAS 6338/4-  
♦ Sealing adapter - VAS  
6338/5- for front refrig‐  
erant circuit.  
♦ Sealing adapter - VAS  
6338/11- for front re‐  
frigerant circuit.  
116  
Rep. gr.87 - Air conditioning system  
GETth  
Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
Note  
On vehicles having condensers with an integrated receiver/des‐  
iccant cartridge which cannot be renewed separately or which is  
not available as a separate replacement part, the condenser must  
be renewed after flushing (together with integrated desiccant car‐  
tridge) ⇒ Heating, air conditioning; Rep. gr. 87 ; Refrigerant  
circuit; System overview - refrigerant circuit and ⇒ Electronic  
parts catalogue .  
lk  
up! 2017 ▶, e-up! 2017 ▶  
Vehicle  
Adapters required for refriger‐ Adapters required for re‐  
ant pipes to air conditioner frigerant pipes to receiver  
compressor  
Miscellaneous  
up! 2017 ▶, e-up! 2017 ♦ Low pressure side adapter  
Receiver can be flush‐  
ed.  
Install a–dapter - VAS  
6338/36- or adapter -  
VAS 6338/34- (or a dril‐  
led out expansion valve  
⇒ page 96 ) in place of  
expansion valve  
- VAS 6338/12- connected  
to air conditioner service  
station and adapter - VAS  
6338/48- .  
After flushing, install a  
new receiver.  
♦ High pressure side adapter  
- VAS 6338/3-  
After flushing, install a  
new expansion valve.  
♦ Flushing electric air condi‐  
tioner compressor adapter -  
VAS 6338/40- and adapter  
- VAS 6338/41- , see notes:  
⇒ page 155  
Note  
On vehicles having condensers with an integrated receiver/des‐  
iccant cartridge which cannot be renewed separately or which is  
not available as a separate replacement part, the condenser must  
be renewed after flushing (together with integrated desiccant car‐  
tridge) ⇒ Heating, air conditioning; Rep. gr. 87 ; Refrigerant  
circuit; System overview - refrigerant circuit and ⇒ Electronic  
parts catalogue .  
1. Refrigerant circuit  
117  
GETth  
Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
Jetta 2015 ▶, The Beetle 2017 ▶, The Beetle Cabriolet 2017 ▶  
Vehicle  
Adapters required for refriger‐ Adapters required for re‐  
ant pipes to air conditioner frigerant pipes to receiver  
compressor  
Miscellaneous  
Jetta 2015 ▶, The Bee‐ ♦ Low-pressure side adapter  
Remove desiccant  
bag/cartridge and seal  
receiver.  
Install a–dapter - VAS  
6338/18- (or a drilled  
out expansion valve  
⇒ page 96 ) in place of  
expansion valve.  
tle 2017 ▶, The Beetle  
Cabriolet 2017 ▶  
- VAS 6338/12-  
♦ High pressure side adapter  
- VAS 6338/3-  
After flushing, install a  
lk  
new desiccant bag/car‐  
♦ Adapter - VAS 6338/48- for  
air conditioner service sta‐  
tion  
tridge.  
After flushing, install a  
new expansion valve.  
If a cond–enser/receiver  
with permanently in‐  
stalled desiccant bag /  
cartridge is installed,  
leave the condenser/  
receiver in situ and  
flush the refrigerant cir‐  
cuit.  
After flushing, install a  
new receiver.  
Note  
On vehicles having condensers with an integrated receiver/des‐  
iccant cartridge which cannot be renewed separately or which is  
not available as a separate replacement part, the condenser must  
be renewed after flushing (together with integrated desiccant car‐  
tridge) ⇒ Heating, air conditioning; Rep. gr. 87 ; Refrigerant  
circuit; System overview - refrigerant circuit and ⇒ Electronic  
parts catalogue .  
Jetta 2018 ▶, The Beetle 2018 ▶, The Beetle Cabriolet 2018 ▶  
Vehicle  
Adapters required for refriger‐ Adapters required for re‐  
Miscellaneous  
ant pipes to air conditioner frigerant pipes to receiver  
compressor  
Jetta 2018 ▶, The Bee‐ ♦ Low-pressure side adapter  
Remove desiccant  
bag/cartridge and seal  
receiver.  
Install a–dapter - VAS  
6338/18- (or a drilled  
out expansion valve  
⇒ page 96 ) in place of  
expansion valve.  
tle 2018 ▶, The Beetle  
Cabriolet 2018 ▶  
- VAS 6338/12-  
♦ High pressure side adapter  
- VAS 6338/3-  
After flushing, install a  
new desiccant bag/car‐  
tridge.  
♦ Adapter - VAS 6338/48- for  
air conditioner service sta‐  
tion  
After flushing, install a  
new expansion valve.  
If a cond–enser/receiver  
with permanently in‐  
stalled desiccant bag /  
cartridge is installed,  
leave the condenser/  
receiver in situ and  
flush the refrigerant cir‐  
cuit.  
After flushing, install a  
new receiver.  
118  
Rep. gr.87 - Air conditioning system  
GETth  
Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
Commercial vehicles  
Note  
For a detailed description of assembling the flushing circuit, refer  
to the workshop manual ⇒ Air conditioning system with refrigerant  
R134a; Rep. gr. 00 ; Cleaning refrigerant circuit, commercial ve‐  
hicles .  
Caddy 2016 ▶  
Vehicle  
Adapters required for re‐ Adapters required for re‐  
Miscellaneous  
frigerant pipes to air con‐ frigerant pipes to receiver  
ditioner compressor  
Caddy 2016 ▶  
Low-pressure side  
adapter - VAS  
6338/12-  
Vehicle–s with Modine  
condensers:  
Install a–dapter - VAS  
6338/18- (or a drilled  
out expansion valve  
⇒ page 96 ) in place of  
expansion valve.  
♦ Remove desiccant bag  
and seal receiver.  
High pressure side  
adapter - VAS 6338/3-  
Vehicles with Showa  
condensers:  
After flushing, install a  
new expansion valve.  
Adapter - VAS  
Flush desiccant car‐  
tridge also.  
6338/48- for air condi‐  
tioner service station  
After flushing, install a  
new desiccant bag/car‐  
tridge.  
Crafter 2017 or MAN TGE ▶  
Vehicle  
Adapters required for re‐ Adapters required for re‐  
Miscellaneous  
frigerant pipes to air con‐ frigerant pipes to receiver  
lk  
ditioner compressor  
Crafter 2017 or MAN  
TGE ▶  
Low-pressure side  
adapter - VAS  
6338/12-  
♦ If the vehicle has a sec‐  
ond evaporator, the  
rear refrigerant circuit  
(roof air conditioning  
system) must be rinsed  
first.  
Install a–dapter - VAS  
6338/38- (or a drilled  
out expansion valve  
⇒ page 96 ) in place of  
expansion valve.  
High pressure side  
adapter - VAS 6338/3-  
After flushing, install a  
new expansion valve.  
Adapter - VAS  
Removedesiccant bag  
and seal receiver.  
6338/48- for air condi‐  
tioner service station  
After flushing, install a  
new desiccant bag.  
♦ Adapter - VAS 6338/5-  
for low pressure side of  
front refrigerant circuit.  
Adapter - VAS  
6338/63- for high pres‐  
sure side of front refrig‐  
erant circuit.  
♦ Adapt low pressure line  
for second evaporator  
using adapter - VAS  
6338/3- .  
Adapt high pressure  
line for second evapo‐  
rator using adapter -  
VAS 6338/60- .  
1. Refrigerant circuit  
119  
GETth  
Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
Transporter 2016 ▶  
Vehicle  
Adapters required for re‐ Adlkapters required for re‐  
frigerant pipes to air con‐ frigerant pipes to receiver  
ditioner compressor  
Miscellaneous  
Transporter 2016 ▶  
Low-pressure side  
adapter - VAS  
6338/12-  
Removedesiccant bag  
and seal receiver.  
After flushing, install a  
new desiccant bag.  
Adapter - VAS  
Install a–dapter - VAS  
6338/56- (or a drilled  
out expansion valve  
⇒ page 96 ) in place of  
expansion valve.  
High pressure side  
adapter - VAS 6338/3-  
6338/63- for high pres‐  
sure side of front refrig‐  
erant circuit.  
Removeand drill open  
expansion valve for  
rear evaporator  
Adapter - VAS  
6338/48- for air condi‐  
tioner service station  
Adapter - VAS  
6338/64- for low pres‐  
sure side of front refrig‐  
erant circuit.  
⇒ page 96 .  
After flushing, install  
new expansion valves.  
♦ Adapt low pressure line  
for second evaporator  
using adapter - VAS  
6338/61- .  
♦ Seal low pressure line  
for 2nd evaporator us‐  
ing adapter - VAS  
6338/62- .  
Adapt high pressure  
line for second evapo‐  
rator using adapter -  
VAS 6338/60- .  
On vehicles with 1  
evaporator system,  
flush once.  
On vehicles with 2  
evaporator systems,  
flush twice.  
1.6.9  
General information about blowing  
through with compressed air or nitrogen  
In order to remove moisture and other contaminants as well as  
old refrigerant oil from the refrigerant circuit as cleanly as possi‐  
ble, without wasting the refrigerant and in an uncomplicated and  
environmentally compatible way, the refrigerant circuit must be  
cleaned with refrigerant R1234yf (flushed with R1234yf refriger‐  
ant) ⇒ “1.6 Cleaning refrigerant circuit”, page 92 .  
Blowing through the refrigerant circuit with compressed air and  
nitrogen is a method to be applied e.g. only if individual compo‐  
nents are to be cleaned.  
120  
Rep. gr.87 - Air conditioning system  
GETth  

Related Topics